hob grinding used for sale

Machine type: EVT 130 Manufacturer: ERBA Power kW: 1.1 Total volume: 130 lt. Description: The EVT 130 long trough mass finishing machine from ERBA has a durable, hot-cast polyurethane lining. Emptying or separation is carried out via bottom emptying (manual/pneumatic). By means of insertable partitions, the work container can be divided into compartments for individual processing of the parts. The machine has an electrical control cabinet and can be equipped with fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and assoc ...

Machine type: EVT 170 Manufacturer: ERBA Power kW: 1.1 Total volume: 170 lt. Description: The EVT 170 long trough mass finishing machine from ERBA has a durable, hot-cast polyurethane lining. Emptying or separation is carried out via bottom emptying (manual/pneumatic). By means of insertable partitions, the work container can be divided into compartments for individual processing of the parts. The machine has an electrical control cabinet and can be equipped with fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and assoc ...

grinding length: 4000 mm grinding width: 1100 mm workpiece height: 1100 mm total power requirement: kW weight of the machine ca.: 21 t dimensions of the machine ca.: m Modernisierte Präzisions-Flach-und Führungsbahnschleifmaschine aus Überholungsbetrieb. Geschliffen wurden unter anderem Betten für neue KERN Drehmaschinen. -Digitalanzeigen nachgerüstet -Umbau auf Kugelrollspindeln in der Querachse -Schleifspindel für Umfangsschliff -schwenkbare Schleifspindel für Untergriffe -Originalschabbild in der Längsachse -Elektrik erneuert -Aufspannfläche 4300 x 1500 mm Bei Nutzung einer Grube können wesentlich höhere Werkstücke geschliffen werden! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DECKEL S11, universal tool & cutter grinder, under power in our warehouse, Mimu machine-tools (Italy)

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Control type (cnc/manual): Manual, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic , Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Distance between points: 500 mm, Height of points: 100 mm, Ø of the grinding wheel: 300 mm, Normal grinding wheel width: 25 mm, Maximum usable width of the grinding wheel: 50 mm, Grinding wheel hole: 127 mm, Workpiece holder head: 75-110-150-220-275-375-550-750 rpm, Tilt table in degrees: 8º, Hydraulic table speed: 0.10/6 m/min, Automatic fast forward: 20 mm, Advance in depth: 0.10 to 1 mm, Plongee feed rate: 0.10-5 mm/min, Fine-tuning time regulation in seconds: 60s, Workpiece holder head motor: 2 speeds: 0.38/0.55 HP, Motor head for grinding wheels: 3 CV, Hydraulic pump motor: 0.5 HP, Cooling pump motor: 0.10 HP, Internal grinding apparatus: 0.75 HP, Points: Morse 4 and 3, Weight approx.: 1600 Kg

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic, Maximum length to be rectified in plongeé: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

Universal Radius Metal Belt Sanding Machine Specifications: - Sanding belt dimensions 2000 x 75 mm - Surface grinding opening 400 x 75 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment via handwheels - Sanding belt speed 30 m/sec. - Working height 960 mm - Various sanding rollers Ø 25 , 30 , 39 , 45 , 57 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 125 kg

max. dia. of grinding wheel: 175 mm boring diameter: 32 mm max. width of grinding wheel: 25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surfaces reference plates, roughness measures MASSI cylindrical grinding TGL 4763 Rz 0.8 μm - Rz 20 μm in wooden box Dimensions: 345 x 125 x 40 mm

Surface reference plates, roughness measures MASSI cylindrical grinding TGL 4763 Rz 0.63 μm - Rz 2.5 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surface reference plates, roughness measures MASSI cylindrical grinding TGL 4763 Rz 0.1 μm - Rz 0.4 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surface reference plates, roughness measures MASSI surface grinding TGL 4763 Rz 0.063 μm - Rz 0.16 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surface reference plates, roughness measures MASSI cylindrical grinding TGL 4763 Rz 1.6 μm - Rz 20 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surfaces of reference plates, roughness measures MASSI surface grinding TGL 4763 Rz 1.6 μm and Rz 6.3 μm in wooden box Dimensions: 130 x 120 x 30 mm

Surface reference plates, roughness measures MASSI surface sanding TGL 4763 Rz 0.8 μm - Rz 20 μm in wooden box Dimensions: 345 x 125 x 40 mm

Cup Grinding Wheels FAG N13001 150 x 80 x 20. A 130x64 2 pieces ! New ! Dimensions: 170 x 170 x 180 mm

Tool grinding machine WMW SWA 200 grinding diameter max Ø 600 mm grinding length max 470 mm table movement longitudinally 470 mm Tool holder MK2 swivel 0-6 °, 90° Speed range: 1260 - 3100 rpm 0,0.0 4 kW 220 / 380 V used, tested ! Dimensions: 1100 x 1100 x 1500 mm

Tool grinding machine HENDEL+KUBASCH WBV year: 1961 grinding diameter max: 50 mm grinding length: 250 mm workpiece length: 300 mm motor: 0.0.00 mm 7 kW 380 V used, tested !' Dimensions: 1000 x 1000 x 1400 mm

Grinding spindle DKF 2 . 7 - 4 / 1 ( 2.7-4/1 ) n max: 16500 rpm Ø 70 mm Tool holder: Ø 25 x 30 mm / Ø 13 x 20 mm Dimensions: 335 x 80 x 80 mm

Grinding spindle CCCP BC3 - 70 80 x 300 N 7614 n max: 12000 rpm Ø 80 / 90 mm Dimensions: 450 x 95 x 95 mm M12 attachment: Ø inside 15,Dimensions: 450 x 95 x 95 mmbr /M12br /br /Attachment: Ø inside 15,Dimensions: 450 x 95 x 95 mmbr /br /M12br /br /Attachment: Ø inside 15,05,00 9 mm; Ø outside 28 mm Drive: Ø inside 28.5 mm; Ø outside 40.6 mm

Grinding spindle DKF 3.8 - 7 / 1 ( 3.8-7/1 ) TGL 4870 ( TGL4870 ) n max: 14000 rpm Ø 80 mm Dimensions: 550 x 80 x 80 mm M15 x 1.0 left-hand thread

Grinding spindle DKF 3.4 - 3 / 2 ( 3.4-3/2 ) TGL 4870 ( TGL4870 ) n max: 32000 rpm Ø 40 mm Dimensions: 285 x 40 x 40 mm

Grinding spindle DKF 6.6 251 / 21 ( 6.251/21 ) n max: 12500 rpm Ø 80 mm conical on both sides Ø 28 to 21 mm x 56 mm flattened to 24 mm Ø 28 to 21.5 mm x 45 mm Dimensions: 360 x 80 x 80 mm

Grinding spindle FEMINA 3.4 - 3 / 1 ( 3.4-3/1 ) TGL 4870 ( TGL4870 ) n max: 32000 rpm Ø 40 mm Dimensions: 260 x 40 x 40 mm

Grinding spindle DKF 2.6 - 4 / 1 ( 2.1 6-4/1 ) TGL 4870 ( TGL4870 ) n max: 20000 rpm Ø 60 mm Mounting hole: Ø 13.5 mm (conical) Drive: Ø Spigot: 17.9 mm; Ø Thread: M10 x 1 Dimensions: 300 x 60 x 60 mm

Grinding spindle DKF 3.8 - 8/2 ( 3.8-8/2 ) TGL 4870 ( TGL4870 ) n max: 14000 rpm Ø 80 mm Dimensions: 635 x 80 x 80 mm

Grinding spindle DKF 5.12-7/21 TGL 4870 ( TGL4870 ) n max: 4000 rpm Ø 125 mm Dimensions: 590 x 125 x 125 mm

Grinding spindle DKF 2.10-7-1 TGL 4870 ( TGL4870 ) n max: 10000 rpm Ø 100 mm Dimensions: 520 x 100 x 100 mm

Grinding spindle PAGUS P80x160R 5554 Ø 80 mm Dimensions: 260 x 90 x 80 mm

Wide belt sanding machine for wood, veneer and varnish Ernst LBK 1300 Grinding width: 1300mm Transverse grinding unit Longitudinal grinding unit

Wide belt grinding machine OTT RS-O Grinding width: 1300mm Calibration roller + fine sanding + cleaning brush

Wide belt grinding machine Boere Elite 1300 BK Grinding width max. 1300mm Grinding calibration roller from below

grinding diameter: 630 mm grinding length: 600 mm centre height: 320 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wird überholt nach Kellenberger Messprotokoll und neu lackiert. Die anfällige Güttinger Steuerung wird durch die zeitgemäße BEMA X Steuerung ersetzt. Das heißt die Maschine erhält in diesem zuge auch eine komplett neue Elektrik. Siehe Beispielfotos. Maschine mit verstärktem Werkstückspindelstock zum fliegend Schleifen von schweren Werkstücken. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various flanges

ELB SURFACE GRINDER 460x2440mm CNC Dresser

Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 500, Recent Electric retrofit The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding gap.

grinding diameter: 250 mm grinding length: 400 mm centre height: 125 mm Control: Fanuc 21i-T total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine gewartet und teilüberholt. -Neue Schleifspindellagerung -Neue x-Achs Spindel -Obertisch überschliffen -Neue Geometrie Tischgeometrie -Neue Geometrie WSS zu Schleifspindeln B-Achse mit 1° Hirth Verzahnung Längspositionierung HF-Innenschleifspindel GAP Papierbandfilter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: mm speed: m/min Bar length: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAX DIAM 200

Manufacturer: Ziersch Model: ZT 820 Year of Manufacture: 2008 Type of Machine: Grinding Machine Certification: CE Marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

PART NUMBER: 7549 Specifications: - max width of the workpiece 1100mm - max height of the workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + boot boot + metal roller –in advance: - metal roller, slip - aggregate - metal roller, slip - A unit with a shoe - metal slip outfeed roller – from below: - Pulling strap - pneumatic oscillation of the belts - electric lifting of the table top - 2 types of feed speeds - 11kW motor - with pneumatic brake - working pressure 6-8bar - extraction spigot diameter 2x150mm - total dimensions length/width/height 1960x1700x2000mm - weight about 2000kg ADVANTAGES – made in Germany – 2 units – unpainted – used grinder, very good condition Net price: 34900 PLN Net price: 8116 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

grinding length: 600 mm grinding width: 250 mm workpiece height: ca. 385 mm table surface area: 600 x 200 mm table speed -stepless-: 2 - 35 m/min table load capacity: max. 250 kg grinding wheel size: ø 225 x 25 mm grinding wheel hole diameter: 50,8 mm vertical feed autom.: 0,001 - 0,099 mm rapid traverse vertical: 600 mm/min cross feed of table continual: 10 - 1000 mm/min rapid traverse cross: 1000 mm/min total power requirement: 6 kVA dimensions of machine L x W x H: 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 8400 mm grinding width: 1450 mm workpiece height: 1250 mm surface area: 8000 x 1250 mm table height over floor: 920 mm distance between columns: 1470 mm workpiece weight max.: 59700 kg weight of the machine ca.: 59,7 t dimensions of the machine ca.: 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW The data for this ad was created with ModulMWS - the  ...

: 0600 mm : 300 mm : 342 mm : 700x340 mm : 355x38x127 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0800 mm : 400 mm : 342 mm : 900x460 mm : 355x38x127 mm : 2400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel Ø: 300 mm Grinding wheel width: 50 mm Grinding wheel speed: 1400 rpm Grinding wheel drive: 380 V, 1.5 kW Space requirement: 1050 x 580 x 1200 mm Weight approx.: 140 kg

grinding diameter: 630 mm grinding length: 600 mm centre height: 320 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine with heavy duty workhead. Machine will be partial overhauled before delivery. Machine will get a geometry protocoll according to the Kellenberger new machine guideline The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.