135,750 used machines on RESALE, but how to find them? Machine Search
Portoner of plongee, Cymbals portaamuelas, CNC FANUC, Centralized automatic grease OPTIONAL: Portarrels of enfilada, Fairing, Removal of gearbox and adaptation of variator speed for drag wheel, 1 Year Warranty / Porta plongee rules, Saucers wheel holder , CNC FANUC, Automatic lubrication system. OPTION: Porta rules enfilade, protection, eliminating gearbox and variable speed adjustment for wheel drive, 1 year warranty, Ø grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min / max to grinding: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel speed nº: infinite, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi - TF, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Maximum infeed grinding length: 125 mm, Motor power grinding wheelhead: 7,5 Kw, Lo ...
, Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 160 mm, Ø min / max to grinding: 1.5 / 75 mm, Regulating wheel width: 160 mm, Regulating wheel dimensions (od x id x width): 304.8 x 190.5 x 160 mm, Grinding wheel width: 160 mm, Maximum infeed grinding length: 160 mm, Motor power grinding wheelhead: 11 Kw, Long: 2.015 mm, Width: 1.280 mm, High: 1.440 mm, Weight: 3.000 Kg., Accessories included:
Grinding wheel gap : 1.5 / 50 mm, Max.width of wheel in feed grinding : 125 mm, Grinding wheel dimensions (od x id x width) : 325 x 175 x 125 mm, Grinding wheel Ø ext.min. : 220 mm, Max. profile depth of the grinding wheel: 8 mm, Lubrication (auto / manual): Automatic , Infeed (auto / manual): Automatic , Regulating wheel dimensions (od x id x width) : 220 x 125 x 125 mm, Regulating wheel Ø ext.min.: 165 mm, Grinding wheel motor power : 7,5 Kw, Regulating wheel motor power: 0,75Kw, Length: 1.520 mm, Width: 1.020 mm, Height: 1.260 mm, Weight: 1.550 Kg., Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º, Accessories included: Infeed workpiece feeder, hydraulic Infeed, diamond dressing compensator, SIEMENS PLC
CNC, Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0.55 Kw., Total power: 27 Kw., Voltage: 220 / 380V, Long: 1.800 mm, Width: 2.800 mm, High: 1.900 mm, Weight: 6.420 Kg., Accessories included:
Charger (loading and unloading), High: 2,000 mm, Long: 2.700 mm, Width: 2.100 mm, Weight: 6.580 kg, Voltage: 220/380 V, Total power: 28Kw, Accessories included: Feeder / Feeder, Grinding wheel width: 250 mm, Regulating wheel width: 250 mm, Ø min / max to grinding: 3/125 mm, Control type ((cnc / manual): Manual, Maximum infeed grinding length: 250 mm, Regulating wheel dimensions (od x id x width): 350 x 250 x 125 mm, Ø grinding wheel dimensions (od x id x width): 500 x 250 x 304.8mm
grinding length: 600 mm grinding width: 300 mm magnetic clamping plate: 600x250 mm wheel diameter: 220-300 mm weight: 2200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mm tooth width max.: 58 mm spindle speeds (infinitely variable): 6000 U/min work piece spindle speed: 1200 U/min diameter of tools max.: 230 mm diameter of tools min: 69,85 mm x-axis: 325 mm y-axis: 350 mm z-axis: 470 mm b-axis: + 90,1 / - 1 ° work piece table - Ø: 212,71 mm Control: SIN 840 D SIEMENS total power requirement: 75 kW weight of the machine ca.: 10.000 Kg dimensions of the machine ca.: 6,10 x 4,40 x 3,30 m coolant filtering unit Hoffmann HSF 100 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 800 mm grinding width: 400 mm workpiece height: 375 mm table surface area: 840 x 400 mm table speeds: 0,005 - 35 m/min spindle speeds (infinitely variable): 1000 - 3000 U/min grinding wheel motor: 3,7 kW grinding wheel size: 300 x 50 x 76,2 mm cross adjustment: 100 - 1250 mm/min rapid traverse vertical: 180 mm/min table load: max. 700 kg distance spindle center to table: max. 525 mm total power requirement: kW weight of the machine ca.: 2,8 t dimensions of machine L x W x H: 3,14 x 1,78 x 2,50 m Accessories: magnetic plate 800 x 400 mm, grinding wheel with flange, wheel dressing attachment, wet grinding attachment with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 140 -1260 mm grinding length: 5000 mm swing diameter: mm centre height: 1000 mm centre distance: 8000 mm grinding wheel size: 800 x 80 x 305 mm Control: Allen Bradley PLC workpiece weight max.: 35000 kg spindle drive: 30 kW grinding wheel turining speeds: 720 - 1800 U/min feeds of grinding head: 60 - 4000 mm/min grinding feed: 0,0125 mm/U working spindle drive: 45 kW work piece spindle speed: 240 - 2400 U/min total power requirement: - kW weight of the machine ca.: - t 2008 Electrical Upgrade Computer Controlled Allen Bradley Powerflex Digital Drives Allen Bradley 1606-XL Power Supply N-Tron 508 XT Ethernet Card Allen Bradley Panelview Plus 1250 Digital Readouts Allen Bradley PLC CompactLogix L32E - Crowning and Cambering Capabilities - Stationary Rotating Roll with Travelling Grinding Carriage - 2 Steadies - Servo Drives: Headstock & Grinding Wheel, - Rapid Traverse C ...
grinding diameter: 250 - 1650 mm grinding length: 1000 - 8000 mm swing diameter: mm centre height: 1000 mm centre distance: 8000 mm grinding wheel size: 760/900 x 100 x 305 mm Control: Allen Bradley PLC workpiece weight max.: 75000 kg spindle drive: 66 kW grinding wheel turining speeds: 375 - 1125 U/min feeds of grinding head: 35 - 2600 mm/min grinding feed: 0,0025 - 0,05 mm/U total power requirement: - kW weight of the machine ca.: - t Rough Grinding, Finish, Fine & Superfinish Grinding Re-Conditioning Work Rolls and Back-Up Rolls Hard & Soft Rubber Rolls Machining of: Cylindrical, Convex and Concave Rolls of Various Materials 2018 Electrical Upgrade Allen Bradley PowerFlex Digital Drives 755 Allen Bradley 1609 SPO Ethernet Network Card Allen Bradley PLC - Continuous In-Feed Mechanism of the Grinding Wheel for Compensation of Wheel Ware - Dynamic Wheel Balancing - Electronic Vibration ...
Grinding machine Heesemann type EH52.13 Lw/Lk Bw Specifications: • Grinding width (mm): 1350 • Workpiece thickness (mm): 3 - 150 • Total grinding units: 2 • Longitudinal band: 2 • Contact roller diameter = 200 mm: 1 /15 kW • Combination unit: with small roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate varnish sanding • Table height constant •Carpet • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed: 3 - 12 m/min. • Sanding belt length longitudinal unit (mm): 2,100 x 1,400 • Pressure beam: CSD system, electromagnetic, wear-free • Conveyor belt: new • Availability: tested, in stock
A centerless CNC cylindrical grinding machine Tschudin is available. Workpiece diameter min./max.: 1.5mm/100mm, max. grinding length: 250mm, grinding wheel diameter outside/inside: 400mm/203.2mm, grinding wheel peripheral speed: 50m/s, grinding wheel power: 11kW, control wheel diameter outside/inside: 225mm/127mm, speed: 265rpm, inclination: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Including Knoll Micro Pur 240 F ultra-fine filter, Streuli SHSRT300-TL142/180 lifting station and Kraft & Bauer FB703S-UV3-TFM70° fire extinguishing system. Documentation available. On-site inspection is possible.
Control Siemens Sinumerik 840D Max. workpiece diameter: 250 mm Max. workpiece length: 1500 mm Max. workpiece weight: 150 kg Internal grinding device Paper Belt Filter Centering tip Diamond dressing tile Grinding wheel change aid
Grinding wheel dimensions (od x id x width): Ø406 x Ø229 x 254 mm, Ø min/max to be rectified: 125 mm, Grinding wheel width: 254 mm, Maximum length to be rectified in plongeé: 254 mm, Drive wheel dimensions (OD x ID x W): Ø280 x Ø165 x 254 mm, Working wheel motor power: 30 HP, Total power: 34 hp, Dimensions: 2600 mm long x 1200 mm wide x 1200 high, Weight approx.: 5.500 Kg
Grinding wheel dimensions (od x id x width): Ø610 x Ø304.8 x 355 mm, Ø min/max to be rectified: 1.5 / 125 mm, Regulating wheel width: 355 mm, No. of regulating wheel speeds: infinite, Dressing speed: 225 min1, Dive (auto/manual): 254 mm, Regulating wheel dimensions (od x id x width): Ø355 x Ø203.2 x 254 mm, Maximum length to be rectified in plongeé: 254 mm, Grinding wheel head motor power: 30 kW, Power motor head regulating wheel: 3 Kw, Hydraulic motor power: 0,37 kW, Long: 5.175 mm, Width: 2.950 mm, Tall: 2.120 mm, Weight: 8.375 kg
An ELB cycle-controlled surface grinding machine is available. Grinding length: 600mm, grinding width: 375mm, max. workpiece height: 375mm, magnetic clamping plate dimensions X/Y: 1000mm/375mm, table travel: 525mm, table speed: 30m/min, max. table load: 300kg. Machine dimensions X/Y/Z: approx. 2550mm/2050mm/2500mm, weight: approx. 4000kg. Including a coolant unit. st möglich.
Key data: 318 mm, 648 mm
JONES & SHIPMAN SUPREMA EASY 650 UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER (2010) Table: Swing:... 12.5" Distance Between Centers: 25.5" Table Travel 29.5" Max. Traverse Speed . 472" IPM HPG Increments .. 0.00005", 0.0005", or 0.005" Table Swivel 18 Deg. CCW, 16 Deg. CW Wheelhead: Total Infeed Travel:. 10.236"" Max. Speed .. 236" IPM Minimum Programmable Increment .. 0.00005" HPG Increments .. 0.00005", 0.0005", or 0.005" Swivel Range 190 Degrees CW 45 Deg. CCW External Grinding Wheels: Grinding Wheel Size, L.H. Standard:.. 14" x 2"W x 5"B R.H Standard: .. 12" x 1"W x 5"B Spindle Speeds (3):.. 1773, 2069 & 2400 RPM Motor Power: 5.5 H.P. Headstock: Swivel:.. 15 Degrees CW 90 Deg. CCW Speed, Infinitely Variable:.. 30 to 450 RPM Centers, Standard/Reduced ... #5 MT/#3 MT Approximate Weight: . 11,000 Lbs. Equipped With Internal grinding wheel attachm ...
Grinding machine Heesemann type EH31.11 Lk Bw Specifications: • Grinding width (mm): 1100 • Workpiece thickness (mm): 3 - 150 • Total grinding units: 1 • Longitudinal band: 1 • Calibration roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate varnish sanding • Table height constant •Carpet • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed: 3 - 11 m/min. • Sanding belt length longitudinal unit (mm): 1,900 x 1,120 • Pressure beam: CSD system, electromagnetic, wear-free • Availability: tested, in stock
A CNC cylindrical grinding machine GSN Schleiftechnik including automatic paper belt filter, center point, diamond dressing tiles and grinding wheel changing aid is available. Workpiece length: 1500mm, max. workpiece diameter: 250mm, max. workpiece weight: 150kg, machine dimensions X/Y/Z: approx. 6300mm/2500mm/2500mm, weight: approx. 9000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.
Manufacturer: Kuhlmeyer Model: Double Sandbelt Machine Year of Manufacture: 2019 Condition: Fully Operational Technical Specifications Overall dimensions (L × W × H): approx. 4400 × 2400 × 2450 mm Weight: approx. 2000 kg Connected load: 6 kW Main power protection: 20 A Rated voltage: 400 V, 50 Hz, 3P/PE Control voltage: 24 V DC Protection standard: EN 60204 Compressed air pressure (pneumatics): 6.0 bar Compressed air consumption: 0.1 Nm³/h Dust extraction capacity: 3391 m³/h Air speed: 30 m/s Effective working width: 2700 mm Sanding belt size: 100 × 8340 mm Maximum workpiece weight on machine: max. 50 kg (depending on size, number of vacuum clamps, and machining position) Maximum workpiece weight on infeed table: max. 100 kg (flat position) Mounting drawing number: ENG-026696 --------------------------------------------------------------- Environmental Condi ...
Cylindrical Grinding Machine TSCHUDIN type HTG 400 Between points: 400 mm Centre height: 100 mm Cone: CM4 Spindle speed: from 70 to 500 RPM Max table travel: 420 mm Table orientation at 15° Grinding wheel: Ø 300 mm Retractable tailstock CM3 Machine rebuilt by REWITECH SA (Switzerland) in 1995 Equipped with one settling tank PHILIPS Voltage: 380 V Dimensions (L x W x H): 2000 x 1400 x 1600 mm Weight: approx 1,5 T
RÖSLER R320 Euro rotary vibrator YOM 2017 Outer diameter max. 1350 mm Width of processing channel 325 mm Overall length of processing channel 3050 mm Machine height - upper edge of processing bowl 1210 mm Work piece discharge heigh 1150 mm Height of media unload plug 615 mm Connected load 3 kW Weight 920 kg
Key data: 4000 mm, 1560 mm, 32
CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...
Used grinding machine Vollmer CABG 50U – built in 1995 – Very good condition For sale is a fully automatic gang saw sharpening machine from the quality manufacturer Vollmer. The machine is in very good condition, is fully functional and can be used immediately. Ideal for sawmills or woodworking companies with regular sharpening needs. Specifications: Model: Vollmer CABG 50U Year of Make: 1995 Machine Type: Automatic Gang Saw Blade Sharpener Condition: Very good, regularly serviced Saw blade width: Up to approx. 200 mm Saw blade length: Up to approx. 1650 mm Rake angle adjustment: Approx. -10° to +25° Tooth pitch: Adjustable (depending on the type of saw blade) Abrasives: CBN or diamond grinding wheels Grinding cycle: Fully automatic incl. infeed and return Control: Electronic with program selection Cooling: Integrated coolant supply Connected load: 400 V / 50 Hz ...
SUB: FOR SALE... CHRIS MARINE VALF SPINDLE GRINDING MACHINE AT TURKEY HAVE A GDY SIR WE VE 1 PC USED CHRIS MARINE VALF SPINDLE GRINDING MACHINE AT TURKEY TYPE BSP-2 NO. 463/204 DATA 3X 440V 60HZ IT WAS USED VERY LESS HOURS IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY
Surface grinding machine, Asyst PNC100 CNC [ELB], 600200, wheel 300 mm 40, The machine is in our warehouse in Gussago BS.
: ja : 094089 spindle speeds:: linka 2100 weight of the machine ca.: 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 762 mm, 3048 mm, 813 mm
Minakuchi CNC Cylindrical Roll Grinder Year of Manufacture: 1990 Control: Fanuc Series O-GC (parameters need reloading) Technical Specifications: • Max. Swing: 32” (813 mm) • Distance Between Centers: 120” (3048 mm) • Max. Grinding Diameter: 30” (762 mm) • Grinding Wheel Size: 24” x 1.968” x 10” • Max. Grinding Wheel Width: 1.968” • Spindle Speeds: 1410 / 1530 RPM • Grinding Wheel Motor Power: 30 HP • Workpiece Weight Capacity: 20,000 lbs (approx. 9,070 kg) • Machine Weight: Approx. 30,000 lbs (13,600 kg) Equipped With: • Fanuc Series O-GC CNC Control • Remote hand wheel • Control Panel with Jog / Auto / Handle Modes • Spindle inching, feed hold, emergency stop, ZRN • Taper and crowning grinding capability • Wheel head motor • Work head & tailstock • Work rest supports • Extra wheel hub • I. ...
Key data: 585 mm, 4064 mm
JARBE Universal Cylindrical Grinder Year: 1981 Technical Specifications & Features: • Swing Over Table: 23″ Distance between centers 160” • Hydraulic Table Traverse • Swiveling Table for Taper Grinding • Universal Workhead • Universal Wheelhead • Grinding Wheel Capacity: 20″ • Includes 2 Workrests • Equipped with Coolant System • Electrics: 440 Volt
Rear grinding machine with permanent magnetic clamping plate JUNG type HA 20EquipmentNo: 3344Profile depth: max. 15 mmAngle adjustment: 0 to 2Magnetic plate: 115 x 115 mmClamping range: 110 x 75 mmHeight magnetic plate: 119 mmWorkpiece dimensions L x W x H: max. 60 x 100 x 50 mmPower consumption: 1 ampereOperating voltage: 24 volts, direct voltage (V/DC)- mechanically switchable permanent magnetDimensions L x W x H: 500 x 200 x 125 mmWeight: 25 kggood conditionSuitable for cutting tool mold making for conical background cutting plates or
CNC Univ. Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4Machine - Defect - without ControlMachine not ready for operation - electric without function - without CNC controlFabr. No: 03-02 Year of manufacture 19904 axes (X, Y, Z and R)Table clamping surface 1300 x 250 mmCenter width 700 mmCenter height 155 mmGrinding length (X-axis) max. 400 mmGrinding width (Y-axis) max. 260 mmGrinding spindle speed max. 6000 rpm. Grinding spindle drive 3 kWNet connection 380 Volt, 50 Hz, 25 Amp.- CNC control
A complete Rösler mass finishing machine is available. 1) Central mass finishing machine (centrifugal system) Rösler RotoMatic R 280/24 SE, year of construction: 2008, connected load: 18kW, weight: approx. 7500kg. 2) Rotary dryer Rösler RT 550 EURO-So., year of construction: 2008, connected load: 8.9kW, weight: approx. 1050kg. 3) Rösler R 290/4500 FB/T conveyor belt, year of manufacture: 2008, belt width: 290mm, belt length: 4900mm, connected load: 0.55kW, weight: approx. 430kg. 4) Buffer chute Rösler R 16/6/4 PR, year of construction: 2008, connected load: 4kW, weight: approx. 570kg. 5) Feeding unit Rösler BE 200 K-So., year of manufacture: 2008, connected load: 1.1kW, weight: approx. 200kg. Documentation available. On-site inspection is possible.
A CNC jig grinding machine Hauser is available. Weight: approx. 3000kg, control: ADCOS CNC 400, control option: ASS. Includes a coolant system and various accessories. An on-site inspection is possible.
An older precision cylindrical grinding machine Kellenberger including accessories is available. Centre width: 200mm, centre height: 125mm, max. workpiece weight: 3kg, max. workpiece diameter: 245mm, max. workpiece length: 130mm. An on-site inspection is possible.
Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Dimensions: 4600 mm Length x 2400 mm Width x 2050 mm Height, Weight approx.: 6. ...
Ø grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5 / 100 mm, Ø min / max to grinding: 1.5 / 100 mm, Min/max speed of regulating wheel (r.p.m.): 10 / 250 rpm, Regulating wheel width: 200 mm, Dimensions of the regulating wheel (OD x ID x W): Ø 270 x Ø 140 x 200 mm, Min / max regulating wheel speed (r.p.m.): 10/250 rpm, Maximum length to be rectified in plongeé: 200 mm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel head motor power: 15 kW, Grinding wheel width: 200 mm, Maximum infeed grinding length: 200 mm, Tall: 1420 mm, Motor power grinding wheelhead: 15 kW, Long: 2020 mm, Width: 1300 mm, High: 1420 mm, Weight: 4200 kg
Inv. Num. : 8568 Type:- Producer:- Created: 1980, GO 2025 Parameters: GO 2025: Complete replacement of the electrical system Addition to the NC control system Replacement of hydraulics (servo drives) Fortuna for internal grinding Rotary Table X Replacement of worn parts Grinding the bed
grinding length: 7080 mm grinding width: 500 mm workpiece height: 330 mm Control: Siemens SIMATIC S7 OP17 Passage height: 330 mm grinding spindle data: : grinding wheel diameter: 450 mm grinding wheel width: 100 grinding spindle speed: 6 - 2.100 1/min : 30 kW Feeds: : Longitudinal travel (X-Axis): max. 30 m/min Cross travel (Y-Axis): max. 3 m/min total power requirement: 30 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 8,0 x 2,0 x 3,2 m Equipment and accessories • Basic machine GÖCKEL U9/500 PL, mechanically and electrically refurbished • Siemens S7 control system and OP17 operating screen • Stand-alone electrical cabinet • Integrated handwheel function on the operating screen • Belt filter system with tank capacity approx. 900 l • 1 grinding wheel flange with grinding spindle • 1 pc. Vertical dresser, mounted on machine bed • Documentation ...
A complete vibratory finishing system Rösler, consisting of several components, is available. 1) Trough-type system Rösler R 550/4600 DA, connected load: 15kW, weight: approx. 6000kg. 2) Water treatment centrifuge Rösler Z 600 ASS-1-Turbo. 3) Conveyor belt Rösler R 360/4100 FB/S, belt length: 8220mm, width: 379mm, weight: approx. 400kg. 4) Conveyor belt Rösler R 360/2800 FB/T, belt length: 5650mm, width: 379mm, weight: 230kg. 5) Discharge belt Rösler R 600/2000 FB/T, belt length: 4050mm, width: 620mm, weight: approx. 310kg. Documentation available. An on-site inspection is possible.
A CNC surface grinding machine Jung, overhauled in 2003, is available. Grinding length: 500mm, grinding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm, speed: 4200rpm, weight: approx. 2500kg, operating hours: approx. 16602h. Documentation available. An on-site inspection is possible.
Year of retrofitting: 2025, Maximum distance between points: 1000 mm, Max distance between points: 1000 mm, Max travel Z axis: 650 mm, Max. Z-axis travel: 650 mm, Max. travel X axis: 254 mm, Max travel X axis: 254 mm, Height of points: 175 mm, Ø max to rectify: 350 mm, Main engine power: 7.5 Kw, Max. diameter to be rectified: 350 mm, Max. piece weight: 130 Kg, Control type (CNC/manual): CNC, CNC brand: FANUC, CNC model: Oi-TF PLUS, Dimensions of the grinding wheel: Ø500 x Ø203 x 80 mm, Angle of tilt of the work spindle head: + / -8,5°, Long: 2500 mm, Grinding wheel dimensions: Ø500 x Ø203 x 80 mm, Width: 2300 mm, Height: 2000 mm, Weight approx.: 3500 Kg, Angle of inclination of the work wheel head: + / -8.5°
Grinding length 600 mm Grinding width 320 mm Workpiece height max 500 mm Table movement longitudinally 750 mm Table movement transverse 340 m Grinding wheel diameter 350 mm Grinding wheel width 40 mm Spindle speeds 1500 rpm Rapid traverse vertical 400 mm/min Power 3,7 kw Automatic delivery Magnetic disk Coolant Setup Weight 2500 kg
A CNC cut-off grinding machine Anthratec, previously used for cutting grids, is available. Cutting speed at 2000rpm: approx. 42m/s, speed range: 500–3500rpm, connected load: 30kW, control: Siemens S7-1200. Documentation available. An on-site inspection is possible.
Name: CNC cylindrical grinder Machine type: Preise TT60-20L-C1 Machining size range - diam.: 600x2000mm Controller: Fanuc Series Oi Mate-MD
maximum number of results exceeded
please refine your search
