hob grind used for sale

A Grindingmaster wide belt sanding and brush deburring machine is available. Working width: 900mm, max. workpiece thickness: 150mm, belt speed: 20m/min, conveyor speed: 20m/min, table height adjustment: +/-75mm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 2000kg. The sanding brushes are defective. On-site inspection is possible.

dubbel kop slijper kop kan 180° draaien om te snel te wisselen van slijpsteen

Danoflex Ø 800 mm cylindrical abrasive grinding

GRANULATION AND SEPARATION PLANT, Capacity up to 600 kg/h (see below list), separation surface 750 x 375 mm, Vibratig ytable with a 0.750 kW drive, Blower - 0.750 kW drive, Total drive power 1,5 kW, Weight 380 kg, Processing capacity in kg/h approx. :, CU - Solid cable 500, CU - Stranded cable 250, AL - Cable 300, CU - Granulate 600, CU/AL - Radiator scrap 600, Electronic scrap 250, Various plastics 300, Tyre rubber 300, installed power - used power in work: about 60-65% : 1,5 kW, availability: 1 month approx, capacity: up to 600 kg/h, conditions: new equipment, SPECIAL FEATURES: spares usually available in stock - no downtime, CONSIDERATIONS: Ideal to start a profitable recycling business from scraps

Danoflex Ø 800 mm cylindrical abrasive grinding Max sandingwidth: 800 mm Main motor(s) power : 4.5 kW

Dimensions (L/W/H): 1300x680x1580 mm Weight: 400 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1130x500x1250 mm Weight: 300 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3120x1100x1600 mm Weight: 2000 kg Total power requirement: 6,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3120x1100x1600 mm Weight: 2000 kg Total power requirement: 6,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Reform Surface Grinder was manufactured in 1989. It features a working area of 1,200 mm x 500 mm, ensuring ample space for various grinding tasks. The machine is in very good condition and fully functional. If you are looking to get high-quality surface grinding capabilities, consider the Reform Surface Grinder we have for sale. Contact us for further details.

This 3-axis ELB Surface Grinder was manufactured in 1989. It features a working area of 1,500 mm x 500 mm, ensuring ample space for various grinding tasks. If you are looking to get high-quality surface grinding capabilities, consider the ELB Surface Grinder we have for sale. Contact us for further details.

A Strausak CNC 5-axis tool grinding machine for the production and resharpening of solid carbide, HSS and special tools is available. Travel X/Y/Z: 420mm/250mm/485mm, B-axis: 340°, C-axis: 360°, Rapid traverse X/Y/Z: 15m/min, max. tool diameter production/resharpening: 32mm/150mm, max. tool length: 500mm, max. cutting length: 300mm, Tool holder: HSK63F/SK50, Speed: 12000rpm, Tool positions: 6. Machine dimensions X/Y/Z: approx. 2250mm/2200mm/2200mm, Weight: approx. 4350kg. Documentation available. An on-site inspection is possible.

A Strausak CNC 5-axis tool grinding machine for the production and resharpening of solid carbide, HSS and special tools is available. Travel X/Y/Z: 420mm/250mm/485mm, B-axis: 340°, C-axis: 360°, Rapid traverse X/Y/Z: 15m/min, max. tool diameter production/resharpening: 32mm/150mm, max. tool length: 500mm, max. cutting length: 300mm, Tool holder: HSK63F/SK50, Speed: 12000rpm, Tool positions: 6. Machine dimensions X/Y/Z: approx. 2250mm/2200mm/2200mm, Weight: approx. 4350kg. Documentation available. An on-site inspection is possible.

Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x900x1350 mm Weight: 300 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.

Heavy duty refurbished grinder. Very robust construction. Rotor with staggered blades. Rotor diameter 400mm rotor length 700mm. Powered by 22kW electric motor. Complete with electrical panel with Siemens touch screen panel including inverter for the control of the grinder. This electric panel can also control a loading belt, exhaust fan, etc. The control was built in 2010 for internal tests and used for less than 100 hours. As an alternative, we can also fit a new e.motor 37kW on this grinder and manufacture a new control panel for the increased power at an additional cost. This special rotor with staggered blades is also particularly suitable for heavy applications and for grinding fibrous materials and textiles

Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115 Delivery time: 10 working days after advanced payment

n°1 Cutting chamber: 300x330mm. n°2 hexagonal shafts. n°33 counter-rotating blades, blade Thickness 10 mm or n°10 counter-rotating blades, blade thickness 30 mm n°1 reducer with electric motor 7, 5kW, 400V, 50Hz, Shafts rotation speed 18/20 rpm. Total weight of the Shredder 700 Kg.

Height 1950 Width 1300 mm Length 3000 mm Voltage Electrical: 400V 50Hz 3N Installed Power 45 kw Main material Stainlees Steel Throat Diameter 180 mm Feeding System Hooper Throat Material Stainless Steel

Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending of meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment

Mixing Grinder 114 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 145 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after the advanced payment machine is ready for delivery

Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 10 KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 125 Delivery time: 5 working days after advanced payment

ype: KRAMER + GREBE MW 200 Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Completely made of special stainless steel Working worm and feeding worm Holeplate diameter: 160 mm Hopper capacity approx. 360 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 230,0 Height: 210,0 Installed power: 37,5 kW Voltage: 400 V, 50 Hz

Suitable for the mixing of pre-cut meat and fat with salt, nitrite salt, spices or additives for the production of burgers, ground meat, sausage, nuggets, kebab, various types of dry sausage, vegetables, cheese products and many more. The two mixing shafts with separate motors are independently switchable forward and reverse, at high and low speed. As standard the mixing shafts are equipped with paddles and partial spirals enabling a fast emptying.

Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

Manufacturer: Seydelmann Type: Grinders Mixer 2-speed working worm 1-speed mixing paddle motor, 1.5 kW with 2 mixing arms, independent of working worm Height: 1450 mm Width: 900 mm Length: 1250 mm Voltage: 400V 50Hz 3N Power: 20.0 kW 37 A Throat Diameter: 130 mm Main material: Stainlees Steel Machine weight: 680 kg

Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 6.000 kg/h Electric power: 55 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 131 Length: 205 Height: 245

Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 8.000 kg/h Electric power: 66 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 235 Length: 200 Height: 185

Used homogenizer AK SYSTEMS, type: Hydro Grind laboratory system 50 liters For the production of liquid to medium-viscosity emulsions, dispersions or suspensions - Laboratory equipment with a capacity of 50 litres - All-in-one solution for food, cosmetics, chemicals and pharmaceuticals - Enables easy introduction of solids into liquids - Allows homogenization into a fine droplet structure - Vacuum container - With double jacket for heating or cooling (2 bar) - Maximum temperature in the container: 95°C -Vacuum pump - Connection: 400 V, 50 Hz, 3Ph, 8.0 kW - Weight: 120 kg (without control cabinet) - Condition: Good, ready to use Visits and test runs are possible by arrangement.

Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115

ID3469 Simec LM2000 – Grinding line year/Baujahr 1999 Grinding line consisting of: Protec tilting table, infeed conveyor table, pre-grinding machine with 4 grinding supports, warm air blower, Kirschner putty station, oven, grinding machine with 10 supports (pre-equipped for 12) Grinding line made of: Protec tilting table, infeed conveyor table, pre-grinding machine with 4 grinding supports, warm air blower, Kirschner putty station, oven, grinding machine with 10 supports (pre-equipped for 12)

REF-2488 KOLBE MW32 MEAT MIXER GRINDER WITH 100 mm PLATE Meat mixer-grinder with product feed Manufacturer: KOLBE Model: MW32 Machine no.: 125277 Plate diameter: 100 mm (32) Main motor power: 5.5 kW/7.5 HP Mixer motor power: 1.1 kW/1.5 HP Overall dimensions: largo 1.150 mm, ancho 900 mm, alto 1.800 mm

Used-refurbished machine Enterprise cutter 1700 kg/h capacity 120 L mixing chamber 6 months warranty Technical data Motor power: 5,5 + 1,1 kW Power supply: 25A Feed height: 1267 mm Dimensions: 770x1350x1330 mm Weight: 480 kg

Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas suction fan -Manufacturer: Coral, dry grinding dust extraction filter system type GRINDEX -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm -Weight: 120 kg

Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Manufacturer: Fette, Gear Hobbing Cutters, 6 pieces -Type: Mod.4 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Sale: complete -Transport dimensions: 370/190/H110 mm -Total weight: 16 kg

Gear cutter, module cutter, hob cutter, tooth form cutter, module milling head, end mill cutter, roller cutter, milling cutter, hob cutter, splined shaft hob cutter -Diameter: 63 mm -Height: 40 mm -Reach: 22 mm Quantity: 2x milling cutter fixing disc 650.054.06A SPAN. 5° EV4CO Price: complete -Sale: only complete set -Weight: 1.5 kg

Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Manufacturer: Reinecker, hob cutters, 2 pieces -Type: Ø 70 mm / Ø 67 mm KHSS-E -Hole: Ø 27 mm -Price/Fee: complete -Transport dimensions: 135/70/H70 mm -Weight: 2.1 kg

table diameter: 200 mm workpiece height: 100 mm number of wheels: 1 Control: Robot CNC total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - F ...

Kapp Model AST 203 Hob sharpening machine

CATALOG NUMBER 6024 TECHNICAL DATA - 2.9kW main engine - 0.75kW spindle motor - 0.75kW trolley feed motor - 380V power supply - dimensions length / width / height 1600x1100x1200mm - weight 891 kg Machine equipped with: - 2 tables with dimensions of 300x340mm - pneumatic clamps - angularly adjustable tables in two planes - the possibility of making long and round tenons on the tables - table speed and spindle speed regulated mechanically - adjustable up / down tables - pin width adjustment Net price: PLN 16900 Net price: EUR 3885 Net price, calculated at the rate of 4.35 PLN / EUR (with larger exchange rate fluctuations the price may change)

Gear hobbing machine MIKRON 102 Max. workpiece diameter 120 mm Max. Modul 2 Max. lenght of teeth 130 mm Min./max.nr of teeth 6 – 325 Angle on helical gears 0 – 90 °