hk used for sale

: 40 1008 rated current: 20 A voltage: 24 V weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity 45mm Table size : 1200 x 560 mm Drilling capacity 45mm Spindle Holder MK 4 Quill stroke 170mm Speed / Steps 70-2000 rpm Feed / Steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Control panel: Siemens SIMATIC PANEL, equipment: evaporator units, valves, process connections, fittings, valve, pressure control and measuring section, pressure gauges, pneumatic shut-off valves, solenoid valves, pressure regulators and additional components, an on-site inspection is possible.

spindle turning speed - stepless: 26 - 1650 U/min voltage: 380 V 0: 50 Hz rated current: 15 A connected load: 6,5 kW tool taper: MK 4 weight of the machine ca.: 2,3 t dimensions of the machine ca.: 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Floor-standing automatic central-heating boiler manufactured by HKS Lazar, equipped with fuel hopper, automatic feed/burner system and electronic control. Details visible: Manufacturer: HKS Lazar Series / type: EKO Perfekt Boiler standard: PN-EN 303-5 Controller: PLUM ecoMAX 800, with FuzzyLogic control Fuel hopper with automatic feeding system Feed/fan component marked POL-FANS RMS-140 Connected circulation pumps, valves, pressure/temperature instrumentation and associated pipework visible Electrical supply: 230 V / 50 Hz Maximum operating pressure: 0.2 MPa Maximum operating temperature: 80°C Stated efficiency: up to 81% Permitted fuels stated on the boiler plate: Hard coal / pea coal Brown coal 8 mm pellets, subject to the manufacturer's specified parameters The data plate appears to list several EKO Perfekt boiler variants with water capacities of approximately 36.2  ...

Auction-ID: A1-47396-1066

Hydraulic quick coupler CV30/40 Tilting piece Auction-ID: A3-46114-19477

Submersible pump, coolant pump E. RAWYLER AG HK 4 immersion depth: 275 mm Pump base: Ø 135 mm Pump flange: Ø 183 mm Motor: 0.37 kW 243/420 V Tropical insulated ! Dimension: 560 x 200 x 190 mm

Capacity: 162m3/hour, Head: 130m, 2900 revolutions per minute. Auction-ID: A1-50340-94

This lot is unused ; Auction-ID: A1-51150-37

Höfer Press for sale. Model: HKP 260 + HKP 40 Year: 2005 Dimensions: Dimensions of the HKP260 (for transport): L x W x H 5100 x 2300 x 3000 mm Dimensions of the HKP40 (for transport): L x W x H 3900 x 2300 x 2400 mm Dimensions of each hydraulic unit: L x W x H 1400 x 1400 x 600 mm Loading table dimensions: L x W x H 4900 x 2100 x 1100 mm Outfeed table dimensions: L x W x H 2900 x 2100 x 1100 mm Heating unit dimensions: L x W x H 1400 x 500 x 1300 mm (2x) Main control cabinet dimensions: L x W x H 2000 x 1000 x 400 mm Dimensions of entire system ready for operation: L x W x H 14600 x 2600 x 3000 mm Weight of the HKP260 press (for transport): approx. 13000 kg, all attachments removed Weight of the HKP40 baler (for transport): approx. 6300 kg, all attachments removed Weight of the hydraulics: approx. 350 kg Weight of the switch cabinet: approx. 400 kg Weight of the heaters: ...

SAHINLER HKM 115 hydraulic ironworker machine was built in Turkey by Şahinler Metal Makina Endüstri A.Ş. It is an extremely versatile machine designed for complex machining of structural steel (S235 / S355). It is capable of performing processes such as precise hole and corner punching, as well as shearing flat bars, angle bars and bars. All these operations are performed at 5 individual workstations. Each station is controlled by two hydraulic cylinders and separate foot switch controllers. The use of this solution enables independent or parallel operation of the machine by two operators at two stations simultaneously. The stroke of each cylinder is adjustable in order to increase productivity. All of this makes the offered HKM 115 ironworker machine the perfect solution for increasing production efficiency in production facilities and locksmith workshops. The total weight of the mac ...

MAKE:ISHIKAWAJIMA - HARIMA TYPE:HKA MACH.NO.:HKA 7942 DATE:Jan-77 RATED TORQUE:1500 K.G.M. 10850 LBS-FT

MAKE:ISHIKAWAJIMA - HARIMA TYPE:HKS MACH. NO.:HKS 6776 DATE:Dec-75 RATED TORQUE:1500 K.G.M. 10850 LBS-FT

Heftkopf / Stitching Head Müller Martini HK 0249 HKOeQ6/8 Heftkopf / Stitching Head Müller Martini HK 0249 HKOeQ6/8

Lifting tipper Kemper HK150 - Boiler lifting tipper Kemper - Type: HK150 - 400 volts

Heftkopf / Stitching Head Müller Martini HK 0249 HK 0249 HKOe06 Heftkopf / Stitching Head Müller Martini HK 0249 HK 0249 HKOe06

Heftkopf / Stitching Head Müller Martini HK45 0305.0400 Heftkopf / Stitching Head Müller Martini HK45 0305.0400

Diosna HK224 Lifting tipper for Diosna SP240AD / SPV240AD boiler - Manufacturer: Diosna - Type: HK224 - for Diosna SP240AD and SPV240AD boiler - Load capacity 600Kg - Year of construction 2009 - With boiler scraper - with boiler drive - 400V / 50Hz - 1.7 kW Metrics: Height approx. 405cm Dumping height approx.: 220cm

Lifting tipper Diosna HKV 224 for Diosna boiler Manufacturer : Diosna Type : HKV 224 Tipping height approx. 240 + 302cm without boiler measured Dimensions approx. W: 105cm D: 157cm H: 395cm For Diosna kettle 160+200+240 Baker's condition Details see pictures.

This Sahinler HKP-Z 100 was manufactured in 2016. A robust C-frame PLC controlled deep drawing press, it features a pressure force of 1000 kN and a stroke of 500 mm. The machine includes a large table size of 900x600 mm and a throat depth of 300 mm, suitable for diverse punching and bending tasks. Consider the opportunity to buy this Sahinler HKP-Z 100 punching and bending machine. Contact us for more information about this machine.

Ref. 527 ASBERN Etching Press Machine number: HKI 231 • Two driven steel rollers • The upper roller is height-adjustable • Set to 23.6 mm • Dimensions of the table: 47 x 60 cm • Width of the roller: 45 cm • Weight: 430 KG • Footprint: 90 x 105 cm Condition: Functional, tested and printed. Ref. 527 ASBERN etching press Serial number: HKI 231 Two driven steel rollers The upper roller is height-adjustable Set to 23.6 mm Table dimensions: 47 x 60 cm Roller width: 45 cm Weight: 430 kg Footprint: 90 x 105 cm Condition: In working order, tested and printed.

Key data: 5 KW, 400 V

SenerTech Gas CHP Dachs HKA-GS1 Gas electricity and heat generators from 2009, 26,351 operating hours, with connectors. 5.5 KWel x 1,500 rpm, 400 V / 50 Hz. Manufacturer: SenerTech Model: Badger Type: HKA-G51 Serial Number: 2400982014 Power [KWel]: 5.5 Voltage [V]: 400 Frequency [Hz]: 50 Power [KWth]: 12.5 Engine power [KW]: 21 Year of Make: 2009 Hours: 26,351 Weight unit [kg]: 450 Dimensions LxWxH [m]: 1.3 x 0.8 x 1.6

Unused Düchting Centrifugal Pump Type HK200x6 Year of construction 2015 Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 300 m³/h H 490 m N 1480 1/min P 560 kW Further Düchting pumps in stock Applications: Conveyance of contaminated, chemically neutral or aggressive liquids with up to 10% solids content. Main water drainage in mining Secondary water drainage and mine air cooling in mining Pressure boosting systems in industrial processes Water supply and water treatment plants Condensate conveying Mineral fertilizer industry Oil & Gas Applications LHK125x6 HK150x11 Q150m³/h H730m n1485 1/min P430kw HK250 HPXU100x10 Q90m³/h H250m n1485 1/min P100kw HK150x5 Q163m³/h H325m n1485 1/min P210kw HK150x9 Q220m³/h H435m n1485 1/min P435kw HPXU150-200x5 Q150m³/h H665m n1485 1/min P415kw HK200x6 Q480m³/h H470m n1485 1/min P792kw HK200x4 Q500m³/h H265m n1485 ...

The HKB series swivel machines are used for bending thin sheet metal. Due to their compact design, they fit easily into small workshops and cover a wide range of applications with their segmented upper tool. With an adjustable angle stopper, these swivel machines are also suitable for the production of small batches. Compact and torsion-resistant Segmented upper tool for many bending options Integrated, manual bend compensation Adjustable angle stop for series production Hands free Foot control of the upper bolster clamp Workspace Working length 1270 mm Sheet thickness (max.) – 400 N/mm² 2 mm Dimensions (length x width x height) 1.6 m x 0.9 m x 1.18 m Weight 330 kg Angle range of the bending beam 135°

-Boiler Hebekiper Diosna HKV 224 -with Boku stage -suitable for boilers with metal pipes on the sides -Tilt height approx. 120cm -Height 245cm -Footprint approx. 170x107cm -Year of construction 2015

used lift-tilt device Manufacturer: L&M Type: HKV Year of construction: 2016 Net weight: 800 kg Total weight: 1,600 kg with transport castors

used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW

Lifting tipper König HK1100/2400 for Diosna boiler - Lifting tipper king - Type: HK 1100 / 2400 - for Diosna boiler - with boiler drive - with boiler cutter - Year of construction: 2009

Euchner HKK100S100A05C1717 073056

Nutmaschine - Creasing machine E. Bickel HK3/61 Year 1980 - Serial-No. 442109 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2,

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2,

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Year: 2000, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2, Year :2000

for sale 5 compressors INGERSOLL RAND year 2004 at 2019 model: 2x units C70MK3 430 KW 1xunits MGP655D 48 KW 1xunits C700 100 630 KW 1xunits HKO 400 480KW

-Lifting tipper for Diosna spiral mixer boiler - Manufacturer: Diosna Dierks & Söhne GmbH - Type: HK170 - Lifting tipper is mobile on castors - for spiral mixer boilers from Diosna SPV160A and SP 160A

General SKU307M519 LocationBarneveld MakeBWI Huettlin GmbH TypeKugelcoater HKC-5-TJ No.H 00116 Main Features Volume5 Ltr. Specified Features - Fluid bed dryer batch Fluidbeddryer/coater With pancheck Capacity5 Ltr Pan sizesdia. 300mm Capacity1,5-5,0 KG With sprayer on bottom of pancheck Without fanand without air handlings unit With dust filter5x (dia. 65x430mm) Cleaning with air pulsecheck MaterialGlass, Stainless steel General Year of construction1998 Mounted on wheelscheck With switchgearcheck Floorspace1,2,x1,2 M Total height2,0 M Weight550 KG Extra information - Including add. pan, spare-parts and nozzlesPowdered foodsGeneric medicinesStarchBiotechnologyCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarDairySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalFluid bed dryers batchAPIMinerals & inorganicHuettlinIndustries > Foo ...

General SKU394U1133 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Thermal oil heaterTherminol D12 Heating medium:Oil Heating capacity-40°C/+200°C Electric capacity12,9 kW, 400 volt (ex) With pump(2x) Motor5,5 kW, 400 volt, 2880 (EX) MaterialStainless steel 1.4571 (316Ti) General TypeTR400 HKT/KT-EX Mach.No.HKS08031 Year of construction2008 Floorspace1,75x1,0 m Total height2,45 m Weight1800 kg ATEX designedcheckConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersTemperature control unitsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosme ...

Höfelmeyer control weighing scale type HKW93-3.75-4CBL-E-0151-MS, year 2020, The machine is ideally suited for Weight control in production lines (according to FertigpackungsVO) and features an automatic ejection device (pusher) for defective products., The system was in operation for cans (100, 200, 400 and 800 g), ⚙️ Technical Data, Weighing range: up to 3,750 g, Pitch: 0.2 g, Throughput: up to 180 pieces/min, Protection type: IP65, Compressed air: 6 bar, oil- and water-free, Voltage: 230 V / 50 Hz, Band dimensions:, - Feed belt 2 divided with each length 330mm, - Weighing band 255 mm, - Discharge belt 630mm, Equipment & Features, - Inline control scale for ongoing production, - Automatic pusher ejector for faulty weights, - Conveyor system integrated, - Operator panel (HMI) with recipe management, - Stainless steel version (industrial grade), - Protective cover present, - Ejecti ...

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, encoder, tacho generator, incremental encoder, encoder handwheel -Manufacturer: Euchner, rotary encoder with handwheel -Type: HKD100S100A05 -ID No.: 054866 -Dimension: 105/90/H90 mm -Weight: 0.4 kg

Lifting tipper Diosna HKV 224 Year of Make: 2006 Condition: repaired Suitable for Diosna vat trolley (spiral mixer) Tipping height approx. 185 cm Pliers lock Automatic boiler emptying  Pneumatic Dough Scraper

General SKU394U1149 LocationBarneveld CEcheck MakeLauda Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity12.46 KW Temp.130 °C Specified Features - Temperature control unit Heating medium:Therminol D12 Electric capacity12.46 kW, 400 volt (ex) Temperature-35°C/+130°C With pump2x Capacity18m²/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) General TypeTR400 HKT/K-EX Mach.No.HKS13073 Year of construction2013 Floorspace1,75x1,0 m Total height2,50 m Weight1800 kg ATEX designedcheckConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersTemperature control unitsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & met ...

-Boiler lifter Kemper HK200 RD -for Werner & Pfleiderer DK250 kneading kettle -with boiler drive and boiler scraper

Type - HKV Manufacturer - Ludden & Mennekes Year of manufacture - 2013 Stationary operation. Operates from the loading ramp. EXW Vilnius - 5000 EURO

General SKU394U1134 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Thermal oil heaterTherminol D12 Heating medium:Oil Electric capacity12.9 kW, 400 volt (Ex) Temperature-40°C/+200°C With pump(2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2880 rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) General TypeTR 400 HKT/KT-EX Mach.No.HKS08032 Year of construction2008 Floorspace1,75x1,0 m Total height2,5 m Weight1800 kg ATEX designedcheckConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersTemperature control unitsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosme ...

Spiral mixer KEMPER, type: SP150 AL with lifting tipper DIOSNA HK240 -In very good condition- - Machine overhauled in 2024 - Incl. 3 tank cars (also overhauled) - Kettle for 240 kg dough or 150 kg flour - incl. DIOSNA HK 240 lifting tipper also overhauled - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.

Manufacturer: Carl Zeiss Model: HKM063 Machine type: cylindrical grinding machine Technical Specifications: - Frequency: 50 Hz - Operating voltage: 380 V - Rated current: approximately 10.1 A - Control voltage with/without transformer: 220 V / 24 V - Rated fuse current in the supply line, without/with increased delay: 16 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

EXTRACTION SYSTEM HUNKELER HKU 2000 (Compact Extraction Unit)

Horizontal Kneader Manufacturer : IKA Type: HKD 2.5 VHV Capacity: 2.5 liters Technical specifications : Horizontal kneader heatable Parts made of stainless steel in contact with the product 40/20 rpm Power 0.95 kW Documents: Nameplate

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Hansa Flex, hydraulic unit type HKK0770105A045 -Motor: 5.5 kW -Pressure: up to 170 bar -Flow rate: 6 l/min -Hydraulic reservoir: 45/30l / with level indicator -Individual components: see photos -Dimensions: 945/470/H810 mm -Weight: 120 kg