hinst gmbh used for sale

Heat pump / chiller air-cooled, switchable, reversible Type: HCYGNUS TECH HCY 171 PT1 MTA S.P.A. CYGNUS TECH HCY 171 PT1 are compact heat pump / water chillers suitable for outdoor installation up to -10°C suction temperature. Includes crank tub heating, buffer tank, built-in P1 circulation pump. Cooling capacity kW 36.5 Cold water temp. Outlet / Inlet: 7 / 12°C Volume flow m³/h 6.21 Available pump pressure bar 1.85 Ambient temperature °C 32 Heating capacity kW 43.2 Heating water temp. Outlet / Inlet: 45 / 40°C Volume flow m³/h 7.52 Available pump pressure bar 1.46 Ambient temperature °C 7 Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 power consumption (kW) 18,91 current (A) 33.67 Starting current circuit (A) 201.37 Protection class: IPX4 Dimensions: Depth mm 2104, width mm 1112, height mm 1477 Weight kg 620 C ...

capacity 1 500 l/h power 4,0 (5,44) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 800 mm width 800 mm height 1 750 mm weight 1 000 kg material 1.4301 / AISI 304 suitable for fruit and vegetable juices scope of delivery centrifugal pump ; new machine - top condition

Properties Manufacturer: transmissions GmbH Type / type: 110600 No. S/N: 1457 Year of manufacture: 1999 with drum motor Overall length: 1020mm Overall width: 760 mm Color: Blue / stainless steel Belt: Smooth

Qty. 1 Second-hand laser tube wall thickness measurement unit Mfc.: MSG Maschinenbau GmbH Built: 2009 Determination of wall thickness using laser technology. Max. loupe dia.: 85 mm (can be modified) Wall thickness: 11 – 14 mm Loupe length: 250 – 600 mm Operation speed: 1.3 m/sec. Power: 6.5 kW, 400 V, 21 Amps., 50 Hz Air pressure: 6.0 bar Scope of supply: Removal device Feeder Saw inlet channel Vertical drivers Vertical & horizontal straightener Heavy-duty metal circular saw Blow-out and suction device Weighing device (calculation) Catchments Loupe crane Suction unit Hydraulic aggregat Collection stand

capacity 5 000 l/h power 7,2 (10,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 32 A dimensions: length 2 000 mm width 1 400 mm height 2 100mm weight 1 250 kg material 1.4301 / AISI 304 suitable for fruit and vegetable juices scope of delivery centrifugal pump ; new machine - top condition

Technical data capacitor volume flow max.: 300m3/h capor-mass max in delivery state: approx. 430mm x1610 mm high Cylindricher part: approx. 273 mm weight of the chamber in delivery state: approx. 80 kg content upper part (capacitor): approx. 30L content lower part (template) approx. 28 L material Elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 to 80C capacitor vacuum max: 0 to 1000 mbar (absolute) (capacitor not suitable for overpressure) Temperature exchanger max: 1 to 80C operating equipment Exchanger: water pressure exchanger max: 10bar material exchanger: CU-tinned material capacitor: stainless steel Technical questions or other construction equipment please on request.; ready for use

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 4 020 / 8 160 l/h Engine power: Level 1 1.0 (1.36) kW (PS) Level 2 1.9 (2.6) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 270 mm Width 500 mm Height 810 mm Weight 57 kg Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash

The laser distance measuring device LE200 with PROFIBUS-DP and SSI interface is a state-of-the-art measuring device from Electronic GmbH. With an impressive measuring length of 125m, it is capable of measuring precise distances in a variety of applications. Thanks to the PROFIBUS-DP and SSI interfaces, the LE200 is particularly versatile and can be seamlessly integrated into existing systems. The high accuracy of the device and its fast measurement speed make it an indispensable tool in many industries, including construction, surveying, production and many more. The part number of the LE200 is 2200-00102 and it is a must for anyone who needs to perform precision measurements. With its user-friendly interface and simple operation, the device is also suitable for users without special previous knowledge. Overall, the LE200 laser distance measuring device with PROFIBUS-DP and SSI  ...

Machine type: TIG inverter welding system water-cooled direct and alternating current system Make: Merkle Type LogiTIG 300 AC/DC Serial No. 123.146 Connection voltage 3 x 400 volts Setting range 3 – 300 amps Duty cycle 50 % d.c. at 300 amps 60% d.c. at 280 amps 100% d.c. at 250 amps Current adjustment infinitely variable max. weldable material thickness steel / VA = 8 mm Aluminium = 5 mm Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 32 amps Special accessories touchpad, display cover Connection for water cooling Carriage Dimensions L x W x H 670 x 240 x 1,025 mm Weight 67 kg Age: 4 years Condition: workshop-tested, very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable  ...

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 9 960 / 19 380 l/h Engine power: Level 1 2.5 (3.4) kW (PS) Level 2 4.2 (5.71) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 270 mm Width 500 mm Height 810 mm Weight 90 kg Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 30 S Year of construction: 2009 Serial No.: 109138 specifications: Pressing force: 30 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Height from the ground: 1,310 mm Bale size: 1,200 x 800 x 800 - 1,100 mm Bale weight: up to 270 - 360 kg Drive power: 7.5 kW Cycle time: approx. 29 sec. Pressing time: approx. 14 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 840 - 8 100 l/h Engine power 2.2 (3.0) kW (HP) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 30 S Year of construction: 2009 Serial No.: 109139 specifications: Pressing force: 30 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Height from the ground: 1,310 mm Bale size: 1,200 x 800 x 800 - 1,100 mm Bale weight: up to 270 - 360 kg Drive power: 7.5 kW Cycle time: approx. 29 sec. Pressing time: approx. 14 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)

1/ Straightener RSTM-SU-W 60/7/700 NIR Built in 1999, producer. PBK Automation GmbH Vöhringen, DE Direction of work - from left to right Passage width - 720 mm Belt width from 50-700 mm Strip thickness from 0.4-3.0 mm Strip cross-section max. 1750 mm2 Feed roller diameter - 80 mm Straightening and correction roll diameter. 60 mm Feed speed - max. 30 m/ min Feed rollers - 2 Straightening rollers 7 Correction roller - 1 Drive power 3 kW Colour RAL 6011 - lime green - Upper straightening head half can be folded up pneumatically in a V-shape for cleaning purposes - Infeed of the upper feed roller is also pneumatic - Adjustment of the straightening block is done via socket wrench Drive - via three-phase geared motor with frequency converter - Single-axis positioning control incremental CPS 20 Freely programmable CNC positioning control - Simodrive 611 Tech ...

dimensions: length 643 mm width 410 mm weight 14,5 kg material 1.4301 / AISI 304 suitable for fruit and vegetable juices scope of delivery: two pipe-screens, flap valves and tees piped, with cans 0,25 mm, 2x connection parts with slotted nut DN25 ; new machine - top condition

Hilge GmbH (Groupe Grundfos) HYGIANA II/4 BLOC 25 m3/h

FRECH DAK315H die casting machine manufactured in 1991 by the German company Oskar Frech Werkzeugbau GmbH + CO. KG. is designed for the production of castings by filling moulds with molten brass or aluminium. The reliable FRECH metal injection moulding machine with high-quality components works with casting moulds of a maximum height of 700 mm, which are closed with a force of up to 315 tonnes after being filled with molten material. Depending on the design of the choiceed mould, the aluminium die casting machine also allows for the use of an injection piston with a diameter of 40 to 80 mm. Previously, the machine used a piston with a diameter of 40 mm. The DAK315H aluminium die casting machine weighs approximately 14000 kg. Technical parameters of the FRECH DAK315H metal injection moulding machine - clamping force: 315 t (3150 kN) - injection force: 35 t (350 kN) - ejection for ...

Currently in stock! AGG 200_COK3 Achievement: PRP: 200 kVA / 160kw ESP: 220 kVA / 176 kw 50 Hz 400 volts Disposals: 3-pole terminal block, neutral conductor. Earthing. Engine: Cummins QSB7-G5 Cylinders: 6 incl. starter battery Fuel: Diesel Emission level 0 Generator: Stamford UCI274H 1-bearing Synchronous generator with AVR voltage regulation analogue, directly with Steel disc clutch flanged to engine. Construction: Without sound hood. Control: Cummins PowerComand1.2. Net weight: 2117 kg Dimensions: 2656 x 1130 x 1822 mm Delivery possible on request! Net price plus VAT. The General Terms and Conditions of Business, Delivery, Payment and Installation of Aggretech GmbH shall apply exclusively) G22I809262

various large foods available: Always full wine-hater 220 l diameter: 550 mm Immer-weinhaelter 530 l diameter: 820 mm Immer-weinhaelter 1100 l Diameter: 1000 mm Immer-Weinhaelter 2200 l diameter: 1400 mm; NEW - best condition

Filling system for COOLANT manufacturer: Müller Geräetebau GmbH All information without guarantee

Material: stainless steel

Rotary cutting crusher Claas R 71.1 for woodworking companies Filling opening 1590 mm Machine height 1965 m Filling volume 1.8 m3 Drive power 11 kW Connection cable 4 x 10 mm2 Fuse 50 A Machine weight 1000 kg Capacity depending on feed material up to 1000 kg / h Low noise below 80 dB Plant is ready dismantled, in good condition. Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

different types: - Straw Shredder KSTAS 7,5kW - Straw Shredder KSTAS 9kW - Straw Shredder KSTAS 11kW electric outlet 400V 50Hz (3 phases) fuse 32 A capacity 6 m³/h dimensions: length 1 225 mm width 785 mm height 1 400 mm weight 220 kg material steel varnished discharge height 550 mm discharge connection diameter Ø 160 mm suitable for all sorts of straw scope of delivery screen 22 mm perforation ; new machine - top condition

Bakery shop fittings Aichinger ArtLine III sales counter 3.9 m shop counter bakery sales stand CoolMaxx HotMaxx CoolBottle, used from 11/2018 Type: ArtLine III Manufacturer: AICHINGER GmbH, Ostring 2, 90530 Wendelstein, Germany Purchase according to invoice: 11/2018 Properly and professionally dismantled and stored on pallets in our warehouse. Very good condition. Disc type: ARTLine OK 1252mm I ZP 330mm Countertop Type: Postforming APL Depth: 1060 Front Type: Decor APL Decor Edge: A1 MGM_Schwarz APL Postforming: G/A1 MGM_Schwarz Display: table-level Price bar: EV 1 Front décor top: E/H3395 ST12_Corbridge natural oak Front edge top: H3395 ST12_Corbridge natural oak Version: Standard (V20) Front profile: EV 1 Skirting board: EV 1 Pocket tray type: 1-tube/Waab CNS The shop fittings consist of: #Theke Free-standing end side for modules with glass attachment, ...

The conveyor belt from SAW Engineering GmbH is a robust and reliable means of transport with a length of 6m, a width of 1.1m and a height of 0.85m. It has the SK 2SU50NB/AX-63 L/4 gearbox, which ensures efficient conveying. The conveyor belt is ideal for industrial applications and offers ease of use as well as high durability. If you have any further questions, please contact SAW Engineering GmbH directly. You are also welcome to visit our website. ---------------------------------------------- The conveyor belt from SAW Engineering GmbH is a sturdy and reliable transportation device measuring 6m in length, 1.1m in width, and 0.85m in height. It features the SK 2SU50NB/AX-63 L/4 gearbox, which ensures efficient conveying. The conveyor belt is ideally suited for industrial applications and offers easy operation and durability. For further inquiries, please contact SAW Engineerin ...

- with power take-off drive 540 rpm without universal shaft capacity 6 m³/h dimensions: length 1 225 mm width 785 mm height 1 400 mm weight 220 kg material steel varnished discharge height 550 mm discharge connection diameter Ø 160 mm suitable for all sorts of straw scope of delivery screen 22 mm perforation ; new machine - top condition

Material: Stainless steel 1.4301 Drive: 4 KW Weight: 1550 kg Area per deck: 2,6 m² Incl. 2 x ball knocking cleaning / 2 x sieve with mesh size choice: 0.1 5 mm.

Machine number: 2023-578 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers Specifications: Emergency generator + + NEW - Year of construction 2023 + + producenter:Geen Power Model : GP88 S/I-N-A Engine : Perkins 4 cylinder turbo diesel water-cooled. Generator: MECCALTE Rated Power: 88 KVA Continuous Power: 80KVA RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts L:Operating hours : approx. NEW Year built:2023 Consumption: 14-16./h (75%) Sr: 254865 L2260xW1000x1420/1325 kg Incl. sockets Complete with control Incl. diesel tank in the base frame Immediately ready for use Delivery nationwide possible for an extra charge Adam Power Systems GmbH Power generator of all kinds Werkstraße 16, 24848 Kropp

Engine power 4.0 (5.45) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 880 mm width 735 mm Height 1540 mm Weight 70 kg material Steel painted Hoehe ejection in 450 mm ; New machine - best condition

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Setting range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roller drive DV 26 Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Special accessories 4-roller gearbox DV 26 Age 6 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN 1 piece glass whi ...

- 1 outlet nominal power kg/h 800 kg/h engine power 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 72 5 mm width 690 mm Height 1520 mm Weight 75 kg material 1.4301 / AISI 304 Height ejection in 475 mm Supplied incl. sieve 5mm ; New machine - best condition

MADE directly from the manufacturer of PREMIUM quality large stock for all manufacturers! Conveyor belt / conveyor / new merchandise directly from the manufacturer, MaÃ?anfertigungSpeziell new for Growi - round bale Uncoiler stable conveyor belt / conveyor belt for many applications in industry, agriculture, wood u.v.m. with 3 tissue deposits. - endless with 3-fold different finger-joint dimensions: length 3,000 mm x width 1,200 mmFür Kverneland (3,250 mm x 250 mm), or other manufacturer on request on request, we can the conveyors / conveyor belts on Cut out their individual dimensions. (All lengths and widths possible) We ship worldwide we deliver worldwide, please ask for shipping costs! Not is your desired size? No problem! We customize for you! BELTech GmbH in Lüdenscheid

Machine number: 2023-578 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers Specifications: Emergency generator + + NEW - Year of construction 2023 + + producenter:Geen Power Model : GP88 S/I-N-A Engine : Perkins 4 cylinder turbo diesel water-cooled. Generator: MECCALTE Rated Power: 88 KVA Continuous Power: 80KVA RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts L:Operating hours : approx. NEW Year built:2023 Consumption: 14-16./h (75%) Sr: 254865 L2260xW1000x1420/1325 kg Incl. sockets Complete with control Incl. diesel tank in the base frame Immediately ready for use Delivery nationwide possible for an extra charge Adam Power Systems GmbH Power generator of all kinds Werkstraße 16, 24848 Kropp

Rated power kg/h 1500 kg/h Engine power 11 (15) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 32 A Laenge 810 mm width 725 mm He he 1570 mm weight 133 kg Material 1.4301 / AISI 304 Sieve 5mm ; New machine - best condition

<b>Properties</b> Used pallet roller conveyor of the manufacturer of rack & roll GmbH Condition: Excellent condition with light wear Color: Silver Feet must be ordered separately Expertly disassembled and packed Pre-assembled on a length of 2,640 mm Including a drag reel per item Price per meter <b>Technical data Pallet roller conveyor dimensions approx.</b> Total length of an element: 2,640 mm Total width: 930 mm <b>Mass of the rollers and the frame about</b> Clamping length approx.: 835 mm Diameter approx.: 60mm Distance approx.: 150mm Material: Steel, galvanised Frame: 80x40mm Brake pulley diameter: 90 mm In stock: 140 metres <b>Pallet roller conveyor</b> Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination.  ...

Machine number: 2023-578 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers Specifications: Emergency generator + + NEW - Year of construction 2023 + + producenter:Geen Power Model : GP88 S/I-N-A Engine : Perkins 4 cylinder turbo diesel water-cooled. Generator: MECCALTE Rated Power: 88 KVA Continuous Power: 80KVA RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts L:Operating hours : approx. NEW Year built:2023 Consumption: 14-16./h (75%) Sr: 254865 L2260xW1000x1420/1325 kg Incl. sockets Complete with control Incl. diesel tank in the base frame Immediately ready for use Delivery nationwide possible for an extra charge Adam Power Systems GmbH Power generator of all kinds Werkstraße 16, 24848 Kropp

Compressor black RS 1015 type Rota Nova NK 60 5.5-11 kW / 7.5-15 HP 1.5 m3 / min Ssszy0 L x W x H: 110 x 80 x 100 cm Weight 450 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Machine type: welding rotary table Make: Merkle / Conzelmann Type CD 50/25 - 320 Connection voltage 1 x 230 V Speed range 0.25 – 2.5 rpm, infinitely variable Speed control 1 : 10 Torque 2.5 – 10 Nm Face plate diameter 250 mm Face plates - internal passage 10 mm Tilt angle of the face plate 135° Vertical load capacity 0.5 kN = 50 kg Table height 320 mm Tilting movement manual, clampable Tipping torque 90 Nm Pantograph 400 A 80 % d.c. Connection for - foot switch simple - Double foot switch - Foot remote control Age 3 years Condition: as good as new Weight 44 kg Warranty 24 months from the date of delivery Original price €2,198.00 + VAT Offer price €1,690.00 + VAT Foot switch simple with 3 mtr. cable 239.00 € + VAT 019.0.2900 Double foot switch with 3 mtr. cable 389.00 € + VAT 019.0.2901 Foot remote c ...

Extraction system L x W x H: 2450 x 1340, + distance pipe incl. engine 1400 x 2900 mm Built in 1988 Weight approx. 400 kg The system can be screwed apart. Disassembly by buyer. The system is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

CNC circular saw KASTO variospeed SC 14 – used - : Price from location: 159.500.-€ (net), plus dismantling etc.! Manufacturer: KASTO Maschinenbau GmbH & Co.KG, 77855 Achern/Germany Year of construction: 2006 Technical data of the system: Dimensions of sawing material max. Ø tubes 150mm max. Ø piston rods 110mm Extraction device from Ringler: Power: 4.0 kW Voltage / Frequency 400V / 50Hz max. negative pressure 32 kPa max. air flow rate 520m³/h Sound level 62 dB(A) Protection class IP 54 System dimensions saw: Height approx. 2,200 mm Length approx. 3,900 mm Width (without chip conveyor) approx. 2,000 mm Weight approx. 4000 kg Connection. / Pre-safe. 36 KW / 100 A Former original price: 300.000,- EUR Available: now Condition: good - very good Location: Hamburg area Description of the plant: Machine body in welded construction. The machine stand, ca ...

Tool to CNC milling center Steep cone-cone SK 40 Vsadrq with tightening bolt Tool according to the pictures flat rate EUR 6980.00 Built in 2003 In good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Stock# U2422-6 Used vertical stainless steel AISI 316L aseptic reactor with a total capacity of 340 l by Diessel GMBH & Co. (Germany). Reactor has a working volume of 250 l and is designed to operate at pressures ranging from -1 to 3 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 35 l and is designed to operate at pressures up to 3 bar and temperature up to 150 C. The jacket is insulated and clad with stainless steel sheet. Internal dimensions: diameter 742 mm, length of straight wall line 640 mm. On the side wall of the tank there are 2 stub pipes with mounted accessories. Reactor has open hinged dished top, bolted with clamps. The top equipped with an inspection manway with an internal diameter of 150 mm and 7 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outl ...

PIN cutting machine Berrone one-sided for window manufacturing with pneum. Stop 1. trimming saw 2. pivot cutters top / bottom 3. Groove cutter L x W x H: 250 x 200 x 200 cm Year of construction 1983 Weight approx. 750 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Process chiller / chiller air-cooled, Type: TAEevo Tech 702 P3 M.T.A. S.p.A. TAEevo Tech 702 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crankpan heating, phase monitoring, buffer tank 678 ltr. and built-in P3 circulating pump. Cooling capacity kW 136 Cold water temp. Exit/ Entry (°C): 7 / 12 Volumetric flow rate (m³/h) 23.1 Available pump pressure (bar) 3.19 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 70,5 Max. current (A) 119.3 Starting current circuit (A) 235 Protection Class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2283 Connection Rp 3" Serial No.: 2200349423 Year of construction: 2019 Condition: Optical 2 , Technically ok (used) Used machines m ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 702 P3 M.T.A. S.p.A. TAEevo Tech 702 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crankpan heating, phase monitoring, buffer tank 678 ltr. and built-in P3 circulating pump. Cooling capacity kW 136 Cold water temp. Exit/ Entry (°C): 7 / 12 Volumetric flow rate (m³/h) 23.1 Available pump pressure (bar) 3.19 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 70,5 Max. current (A) 119.3 Starting current circuit (A) 235 Protection Class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2283 Connection Rp 3" Serial No.: 2200349423 Year of construction: 2019 Condition: Optical 2 , Technically ok (used) Used machines m ...

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Heat pump / chiller, air-cooled, reversible Type: CYGNUS TECH HCY 051 MTA S.P.A. CYGNUS TECH HCY 051 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crankpan heating, (no pump, no tank). Cooling capacity kW 14,1 Cold water temp. Exit/ Entry: 7 / 12°C Volumetric flow m³/h 2.41 Ambient temperature 32 °C Heating capacity kW 15,4 Heating water temp. Exit/Entry: 45 / 40°C Volumetric flow m³/h 2.66 Ambient temperature 7 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5,6 Max. current (A) 11.4 Starting current circuit (A) 71 Protection Class: IPX4 Dimensions: Depth mm 550, width mm 1420, height mm 1288 Weight kg 197 Connection Rp 1" Serial No.: 2200371602 Year of construction: 2021 Condition: Optical 2, Technically ok us ...

Line boring machine Ayen with 32 mm grid Bahvy3bjt2 with attacks Pneum.. Holders Motor 0.55 kW L x W x H: 250 x 80 x 200 cm Weight 420 kg Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Heat pump / chiller, air-cooled, reversible Type: CYGNUS TECH HCY 051 MTA S.P.A. CYGNUS TECH HCY 051 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crankpan heating, (no pump, no tank). Cooling capacity kW 14,1 Cold water temp. Exit/ Entry: 7 / 12°C Volumetric flow m³/h 2.41 Ambient temperature 32 °C Heating capacity kW 15,4 Heating water temp. Exit/Entry: 45 / 40°C Volumetric flow m³/h 2.66 Ambient temperature 7 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5,6 Max. current (A) 11.4 Starting current circuit (A) 71 Protection Class: IPX4 Dimensions: Depth mm 550, width mm 1420, height mm 1288 Weight kg 197 Connection Rp 1" Serial No.: 2200371602 Year of construction: 2021 Condition: Optical 2, Technically ok us ...

We sell a lower foldable tail lift the product group Bär Cargolift folding. Type BC 1000F2-A1A/2408-A0 Operating pressure 220 bar Year of construction 2009 The tail lift is in good condition, is available and can be viewed like in Meersburg, Baden-Württemberg.