hinst gmbh used for sale

Capacity: 300l, working positions: 0-40kg, 22° from horizontal, 40-260kg, tilted 45°, main drive gearbox type: RF 73DT 80N4 SEW (Siri 52/72/8BA), power: 0.75kW, design: B 5, rated current: 3.8/2.2A, position: KLK 90°, voltage: 220/380V, 50Hz, multi-range, speed: 21-1400/min, seal: Kaco Ø 50 high, D-seal: SV-full. Tilting gearbox type: KA76 TR42 DT71 D4 BM SEW, hollow shaft diameter: 50mm, power: 0.37kW, design: H 4A, rated current: 2.25/1.3A, position: KLK 0°, voltage: 220/380V, 50Hz, multi-range, speed: 1.6-1400/min, braking torque: 5Nm, brake voltage: 220V, rectifier: BG 1.5. With operating manual and documentation. An inspection on site is possible.

Rolling mill, used Type : W 150 AP Manufacturer : Dr. Collin GmbH Drive : 14 KW Roller diameter : 150 mm Roller width : 400 mm;

Weighing range min.: 175g, temperature range: 10-40°C, voltage: 230V, frequency: 50Hz, with EC declaration of conformity. An on-site inspection is possible, not under power.

Equipment: Heatable/coolable,Manufacturer: G + R W. Ortmann GmbH & Co. KG,Condition: used,Volume: 13,500,Design: rectangular,Base: feet,Number of feet: 6,Heating/cooling (filter bar): available,Temperature control inside: Cooling plate,Total height: 2,450,Total width: 1,600,Total length: 5,050,Type plate: Yes,Outlet: DN40 DIN 11851,Remarks: 2 cooling plates each inside the tanks 1 manhole approx. 300 x 400 mm in the front floor Feet partly with loose, height-adjustable spherical screws (not available for all feet, calottes were not taken into account in the total height)

Laboratory mixer, new machine --> control panel and control cabinet integrated in the machine housing as a compact machine, with all necessary switching and protective devices. Material : Areas in contact with the product in stainless steel 1.4571 Drive : 1.5 KW Mixing plant : ploughshares; --> Mixer with double jacket, heatable/coolable.

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipment: Overpressure,Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 83,500,Max. overpressure: 0.5,Max. permissible overpressure Operating temperature : 50,Specific gravity of the medium: 1.35,Design: upright,Stand shape: feet height adjustable,Number of feet: 8,Diameter inside: 3,850,Cylindrical height: 600,Total height: 8,690,Wall thickness underbody: 5.4,Wall thickness upper floor: 3.0,Year of construction: 2004,Technical documents: Drawing,Manhole / dome: in cylinder (approx. 350 x 450 mm),Type plate: Yes,Equipment: Ventilation/ventilation, spray head, crane eyelets,Outlet: DN100 DIN 11851 ,Remarks: Specified total height

Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 8,850,Design: rectangular,Stand shape: feet height adjustable,Number of feet: 4,Total height: 3,850,Total width: 1,500,Total length: 2,600,Type plate: No,Equipment: Level indicator (without guarantee), Disc,Outlet: DN65 DIN 11851,Remarks: 1 manhole approx. 325 x 420 mm in the front floor Container were professionally cleaned and overhauled by the manufacturer in 2024 Brand new residual drain valves (reduce the size screwed on the Outlet on DN 50 DIN 11851 (with disc valve)) and manhole seals were installed

All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.

Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 9,000,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Diameter inside: 2,000,Cylindrical height: 2,440,Total height: 3,700,Wall thickness underbody: 3,Wall thickness cylinder: 2,Wall thickness upper floor: 2.5,Technical documents: Drawing,Manhole / dome: in the cylinder,Type plate: No,Outlet: DN100 DIN 11851 ,Remarks: 1 manhole approx. 320 x 420 mm in the cylinder Container was professionally repaired by the manufacturer in 2024 cleaned and overhauled brand-new residual drain valve (reduced) outlet to DN 50 DIN 11851 (with

Pressure intensifiers, pressure medium converters, flow control valves -Operating pressure ranges -Hydraulic part (power part): 2 - 32 bar -Pneumatic part (control part): 3 - 10 bar -Volume flow: max. 16 l / min. at (6 bar inlet pressure, load-dependent) -min.: 2 cc/min. (Hydraulic oil with a viscosity of 21 mm³/s [3°E] at 50 °C) -Screw connections hydraulic side: G3/8 pneumatic side: G1/8 -Dimensions: 140/70/H68 mm -Weight: 1.1 kg

Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 24,000,Design: upright,Stand shape: feet height adjustable,Number of feet: 6,Diameter inside: 3,450,Cylindrical height: 1,650,Total height: 3,650,Wall thickness underbody: 4,Wall thickness cylinder: 2.5,Wall thickness upper floor: 3.5,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: No,Outlet : 100,Remarks: 1 manhole approx. 320 x 420 mm in the cylinder Total height according to drawing Tank were built by the manufacturer in 2024 professionally cleaned and overhauled brand-new residual drain valves, sampling valves and

A complete filling line with a 12-position gravity and vacuum filler with integrated twist-off capper for the food industry is available. Filling stations: 12, design: rotary machine, liquid viscosity: thin-medium, filling capacity: approx. 2000bottles/h, capping capacity: approx. 1000-1200/h, containers: heat-insulated, container volume: 35l/50l. This is a complete filling line including conveyor belts, accumulation table, sensors, rotary tables, pumps and format parts. The system was taken out of operation in 2024. Documentation available. An on-site inspection is possible.

Auction-ID: A7-45017-4

Auction-ID: A7-45017-1

Kramer + Grebe GmbH & Co. KG thermoformer, type: VA 430, fabrication number: 500/166, 380 V, 3 Ph, 50 Hz, 20-25 A, dye: (3x) 390 mm x 120 mm, total dimensions: 5800 mm x 1000 mm x 1760 mm. Rollies not included.

Mobile jib, Weight of the gallows (kg): 190 , load capacity (kg): 120 , Dimensions (mm): 1645x800 H 1970, Max height (mm): 1620, Gap dimensions (mm): 670, Minimum spacing dimensions (mm): 310

Turning station RITTAL / E SYS-K System GmbHWome machine for packaging made of ALU system profileSwivel station with roller conveyor, ALU system profile BOSCH REXROTHweight of the turning device 730 kgAs good as new; used

Butcher's counter LADENBAU HANKE GmbH, approx. 380 cm, front windows can be opened upwards, purchased in 2005 for 14,326.83 EUR net, BW 31.08.25 1,- EUR net, renewed in 2015 for 1,868.- EUR net, BW 31.08.25 1,- EUR net, 5 plastic inserts/covers for counters each approx. 54x35x60b cm

Refrigeration Dryer – ALUP ADD 36, Manufacturer: ALUP Kompressoren GmbH, Model: ADD 36 (1), Year of manufacture: 2021, Machine type: Refrigerated compressed air dryer, Description, The ALUP ADD 36 is a refrigerated compressed air dryer designed to remove moisture from compressed air systems. The unit ensures dry and clean compressed air, protecting pneumatic equipment and improving the reliability of production systems., This dryer is suitable for industrial applications where consistent air quality is required, including manufacturing, packaging, and processing lines., Technical Specifications, - Manufacturer: ALUP Kompressoren GmbH, - Model: ADD 36 (1), - Year: 2021, - Product number: 4102005889, - Serial number: ITJ560627, - Power supply: 230 V, - Frequency: 50 Hz, - Power consumption: 0.236 kW, - Phase: 1 Ph, Operating Specifications, - Working pressure: 15 bar, - Maximum pressure: ...

Children's carousel ELEKTRO MOBILTECHNIK GmbH 610/46 L/HE, 440 watts, out of service

available from July/August 2026, in operation for 225 and 380 ml jars with TO 58 and 66, The machine is currently operating with nitrogen blanketing (no steam), which drives the oxygen out of the headspace., For sale is a VTB Glass seal machine (Model VM 105 Twist Off) in good, used, and fully functional condition., The machine is currently still in operation and can be inspected at any time by arrangement. It is ideal for the Food industry (e.g., canned foods, sauces, jams) and convinces with its robust stainless steel construction as well as reliable sealing technology., Inline sealing machine for twist-off closures, Integrated Lid sorting for 58 and 66 closures, Gas purging system (optional, usable) for longer shelf life, Pressure rollers for reliable sealing, Transport belt with adjustable side guides, Height adjustment for different glass formats, Operator panel rotatable and swivel ...

16 pallets of 1260mm x 960mm x 3mm thickness, interleaving and cover board. Approx. 375 sheets per pallet. Auction-ID: A1-45187-111

Type: PERFECTA-JUNIOR Year of Make: 2001 Load capacity: 30 kg Pumping capacity: 80 l/min. Capacity 2 x 150 l Voltage: 400V Power consumption: 1.5 kW Auction-ID: A1-45292-40

Overview: Manufactured in 2004 by the German company Dr. Datz Maschinenbau GmbH, this reliable 24-head wire bail capper is designed for securely sealing wire bail closures on bottles. A high-quality German-built machine, ideal for efficient and precise capping operations in bottling lines. Technical Details: Manufacturer: Dr. Datz Maschinenbau GmbH Type: BVM 24R Year of Manufacture: 2004 Number of Capping Stations: 24 Closure Type: Wire bail closures Machine Direction: Left to right

Fendt / Fella Lotus 1250 T – tedder • Year of construction: 2022 • Working width: approx. 12.50 m • 10-rotor tedder (large-area machine) • Trailed version with transport chassis • PTO drive • Warning signs and lighting available • Wide tyres • Ready to use • Very good technical condition • Regularly serviced and maintained • Ran in action until last season • No known technical defects • Frame professionally repaired in two places • Optimized storage (no longer standard) Auction-ID: 04D-FY8-2

with nuts. and screw feeding The workpieces, max. 100 kg or 25dm³, are stored in the automatic filing machine and sorted in the correct position. At the end of the sorting process, the workpieces are buffered on a linear conveyor rail and sent for separation. Behind the separation is mounted a corresponding transport hose and a blowing air nozzle. Only one workpiece is transported through the transport hose at a time. The electrical interface can be HAN plugs, BUS modules and valve terminals. Workpieces : Press-fit bolt M6 x 15 Max. feeding capacity: 15 screws/minute (1-lane) Maximum filling weight: 100 kg Maximum filling volume: 25 dm³ Voltage: 230 V Max. power consumption: 100 VA Auction-ID: A1-45292-38

GEA Refrigeration Germany GmbH screw cooling compressor, type: Grasso MR-M2655S-28, serial number: M1949, year of construction: 2014, geometric volume: 3912 CM³/rot, flow rate: 845 m³/h, allowable pressure: 28 bar, max speed: 4500 rpm, refrigerant: NH3 R717, empty weight: 3090 kg, with WEG motor, power: 160 kW, dimensions cooling compressor: 3300 mm x 1300 mm x 2300 mm, dimensions switch cabinet: 2400 mm x 600 mm x 2200 mm.