high used for sale

High Pressure Centrifugal Pump, Water Pump, Centrifugal Pump GRUNDFOS CRN3-3. G-V-HQQV Q =3 m3/h H = 15.1 m H max = 19.9 m P max 25 bar engine: 0.37 kW 380 / 480 V connection: 1 1/4 inch used, tested ! Dimensions: 370 x 210 x 450 mm

AVK generator , alternator 2840 kva 400volt year 2008

Roller Door, Machine Protection Door, Quick Gate LABEX Type: 1000 Year: 2003 Door Width: 1600 mm Door Height: 1700 mm 1.3 kW 400 V used, tested ! Dimensions (transport): approx. 2150 x 900 x 500 mm

spindle turning speed - stepless: 26 - 1650 U/min voltage: 380 V 0: 50 Hz rated current: 15 A connected load: 6,5 kW tool taper: MK 4 weight of the machine ca.: 2,3 t dimensions of the machine ca.: 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Five axis machining centre CME QUICK 200 CNC - 2000x1000x1300 mm, 18.000 rpm, CNC SELCA 4045PD, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2100x850 mm, Longitudinal travel x axis: 2100 mm, Cross travel y axis: 1000 mm, Vertical travel z axis: 1300 mm, Cnc: SELCA 4045 PD, Spindle motor power: 26 Kw, Spindle speed: 18000 rpm, Spindle taper type: HSK 63, Automatic tools change nr.: 20, Approx net weight: 18.000 kg, Accessories: Continuos round table 800 mm, coolant thrugh spindle 15 bar, electronic handwheel SELCA SILBOX 2, chip conveyor

Surface Grinding Machine JONES & SHIPMAN 540 X, capacity 450x150 mm, magnetic plate, dust extractor, OPTIDRESS E Factstor 2, Max working dimensions: 450x170 mm, Longitudinal travel x axis: 470 mm, Cross travel y axis: 171 mm, Clearance between worktable and spindle axis: 502 mm, Feed rate x axis: 2-25 m/1, Feed rate y axes: 0 - 1 m/1, Wheel speed: 2640 rpm, Wheel dimension: 200x20x31,75 mm, Spindle motor power: 1,5 Kw, Weight: 1.200 Kg, Accessories: Coolant tank, dust extractor, magnetic plate, OPTIDRESS E Factstor 2

The scope of delivery includes: 01x Truss strut, new Manufacturer: Mecalux Material colour: sendzimir galvanised Overall length: approx. 1,218 mm Center-center hole: approx. 1,164 mm f. Frame profile width: 100 mm Ø drill hole: approx. 10 mm U-profile dimensions: 70 x 30 mm Material thickness: approx. 1.5 mm Weight: 1.78 kg | Pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

High precision protective film laminating machine Brand: Omma Type: PRO-J14_TF New machine Single machine (not integrated in a line) Workpiece dimensions: min. width 130 mm max. width 560 mm min. length 300 mm max. length 2.250 mm min. thickness 19 mm max. thickness 25 mm For application of self-adhesive film on the top of painted surfaces. Laminating rollers Ø 150 mm Working width 1.300 mm Max. workpiece thickness 80 mm Speed adjustable 5/25 m/min Working height (adjustable +/- 20mm) 905 mm Connected load kW 0.75 Integrated insertion/exit rollers Length (approx.) 300 mm Color RAL 7021 + RAL 2004 Operator side (in front of the machine, towards the entrance) right side Standard voltage v 400/50/3+N+T Max. Outer diameter of roller Ø 300 mm Inner diameter of roller Ø 76 mm Technical equipment: - High precision automatic cross cutting foil cutting  ...

Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Working hours machine: 16850 h Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton

The scope of delivery includes: 06x Steel panel, used Manufacturer: SSI Schaefer Total depth: approx. 960 mm Inner depth: approx. 955 mm f. Stand depth: 950 mm Total width: approx. 300 mm Material thickness: approx. 2.50 mm Material colour: sendzimir galvanised Frame profile: approx. 300 x 40 x 20 mm Weight|pcs.: approx. 7,940 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton

Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton

Manufacturer: Palettenregal, Pallet high-bay store: yes, 1stupright frame pieces Qty.: 11, 1stheight mm depth mm: 3500, 1.Transverse beam Qty.: 19, 1.Transverse beam length mm: 2500, 2.Transverse beam Qty.: 4, 2.Transverse beam length mm: 2370,

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

Manufacturer: Emme Elle, Type: LBA 1350, Control: Emme Elle, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Fast exchange device: yes,

Manufacturer: Purete, Type: PRT-D2313, Year: 2020 neu, Control: HMI, Monting of the machine: Polierbürste/ Reinigungsbürste/Reinigungsbürste, Year: 2020 neu, Control: HMI, Number of units: 3, Diameter of brushes: 150 , Units mounted upright: yes, Working width mm: 1.320, Through running hight mm: 2 - 80, Feeding speed continous adjustable: 5 - 25, Required space L x W x H mm: 3.000 x 2.000 x 1950, Year :2020 neu

Manufacturer: Purete, Type: PRT-D2306, Year: 2020 neu, Control: HMI, Monting of the machine: Polierbürste/Bürste/Bürste, Year: 2020 neu, Control: HMI, Number of units: 1 + 2, Diameter of brushes: 150, Units mounted upright: yes, Working width mm: 620, Through running hight mm: 2 - 80, Feeding speed continous adjustable: 5 - 25, Required space L x W x H mm: 3.000 x 1.150 x 1.400, Year :2020 neu

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

Manufacturer: Bauerrichter, Type: GPM 4, Year: 2013, Control: Programm, Software: Polierwalzen 4, Barcode: 3, Monting of the machine: 350, Year: yes, Number of units: yes, kW output motor: yes, Number of rotations controlled: ca.10.500, Units mounted upright: 1.300, Single table system mm: 2 X 1350 X 3200, Working table length mm: 100, Working table width mm: yes, Polierwalzen : yes, Diameter mm: yes, Disc sanding units: no, Fast exchange device: 8000, Automatical polish supply: yes, Required space L x W x H mm: Schaumstofscheiben 4/Hochdosierpistolen 3 Stück, Year :2013

Operating pressure: 2800 bar, Flow rate: 27 l/min, Drive: Volvo Diesel, 160 kW, Operating hours: approx: 350h Trailer, incl. accessories,

Jungheinrich ESE 20 high-speed electric pallet jack truck RA2397 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90074846 Battery change: 2016 TÜV: until 2023 Operating hours: 4267 h Fork length: 1930 mm Fork width outside: 540 mm Maximum load capacity: 2000 kg Lifting: 125 mm Travel speed 8.5-12.5 km/h Including: Instrument cluster and information and service display Quick charger 380V Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

High-temperature chamber furnace with an operating temperature of up to 2,000 °C, including water cooling and sequence control with automatic valves. Usable space: 600 mm x 600 mm x 600 mm (= 220 l.), el. Power: 117 kW,

Offer 25094 Specifications: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 60 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 225 mm - Drilling spindle speeds infinitely adjustable 35 – 950 rpm - Right - Counterclockwise rotation - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 360 mm - Max. distance from drill spindle to table / base plate 740 / 1220 mm - Table with 2 T-slots 700 x 590 mm Height adjustable via rack with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space requirement approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - with: - Emergency stop button -Lighting - Coolant device

centre height: 102 mm centre distance: 450 mm spindle bore: 25 mm spindle speed:: 220 - 2600 weight of the machine ca.: t dimensions of the machine ca.: m Accessories were not checked for completeness Cabinets are not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jungheinrich ESE 20 high-speed electric pallet jack truck RA2396 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90079958 Battery change: 2016 TÜV: until 2023 Operating hours: 6431 h Fork length: 1150 mm Fork width outside: 540 mm Maximum load capacity: 2000 kg Lifting: 125 mm Travel speed 8.5-12.5 km/h Including: Instrument cluster and information and service display Quick charger 380V Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Vertical Multistage High Pressure Centrifugal Pump KSBTyp Movichrom N CN 3/10 2RFabr. Nr 1-P30-837561Nominal flow rate max. 3 m3/hNominal delivery head 70 meters = 7 barNominal speed 2900 rpm. Motor power 1.5 kWNet connection 400 volts, 50 Hz- pump structure in 10 stages- pump elements made of stainless steel, pump base made of cast iron connection flanges DN 32- suitable for drinking water supply, irrigation and drainageSpace requirement pump L x W x H 250 x 220 x 830 mmWeight 38 kgUnused replacement pump made of

Welding Fume Extraction, Soldering Extraction, TBH Type LN 230High Vacuum Filter Device, Laser Extraction, Laboratory Extraction, Extraction System, Filter SystemFabr. No. 230717 year of construction 2018Volume flow 320 m3/hEffective volume flow 50 to 250 m³/hstat. Pressure 20000 PaMotor power 1.1 kWNet connection 230 volts, 50 Hz- stepless suction power regulation via the control electronics on the device- upper part of the housing with several extraction connections 100, 80 and 2x 50 mm- mechanical air filter with approx. 99% separation efficiency- 1 piece filter 300 x 300 x 225

Press capacity: 100 ton Ram stroke: 300 mm Slide adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Free frontal opening L-R: 2.020 mm Free lateral opening F-B: 620 mm Table surface area : 2.000 x 1.000 mm Slide area: 2.000 x 900 mm Hole in table: 1.700 x 300 mm Number of strokes: 10 - 50 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 4.400 mm Dimensions L x W x H: 5.166 x 2.500 x 4.400 mm Weight of machine approx.: 38 ton

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton

Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton

Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5

: 40 1008 rated current: 20 A voltage: 24 V weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25170 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Level 3 120 - 420 rpm - Level 4: 420 - 1530 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance machined base plate - drilling spindle 1250 mm - Coolant device -Lighting - Machine vise - div. 10 pcs HSS - Drill - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

FOR SALE: BRUDERER BSTA 50USL High-Speed Stamping Press With Automatic Strip Feeder BBV 190 500 kN | 100–1120 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 500 kN Stroke rate: 100–1120 strokes per minute Working hours: 41000 h Main motor: 22 kW Control voltage: 24V DC Power connection: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 /44 / 51 mm Shut height adjustment: 64 mm Working Dimensions: Max tool installation width: 1100 mm Strip pass width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Strip entry height adjustable: 60–140 mm Max strip width: 120 mm Max feeding pitch: 85 mm Max material thickness: 4 mm Feeding angle: 180 Deg Machine Dimensions (with BBV 190): Machine footprint (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 1 ...

bore capacity in steel (diameter): 23 mm spindle taper: MK 2 spindle stroke: 130 mm arm length: ca. 860 mm table-size: 1280 x 500 mm surface area: ca. 1250 x 480 mm turning speed range: 115 - 2400 U/min workpiece height max.: ca. 535 mm boring chuck: Schnellspannfutter 1-13 weight of the machine ca.: 690 kg total power requirement: 1 kW range L-W-H: ca. 1300 x 1800 x 2100 mm Distance spindle center - stand center (projection): approx. 860 mm Distance table quill (workpiece height): max. 535 mm Adjustability of the horizontal/vertical arm: approx. 300 - 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: P348, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: High pressure pump, Construction: Mounted on stainless foundation with wheels, Motor: Variator gear - 3,0 kW - 350–1750 rpm., Manufacturer: Rannie, Type: 18.50, Other: Serial no. 4661/71

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 7.750 mm including transmission group, max diam. 3.000 mm.(exceptional transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle type, N.1 loading hopper with conveying screw  ...

A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible.

Nabertherm High Temperature Furnace 1600 °C The high-temperature furnaces HT 04/16 - HT 450/18 have proven themselves for many years in the laboratory and for production. Whether for quartz glass, glass-ceramics, the sintering of CIM components or other processes up to With a maximum temperature of 1800 °C, these furnaces represent the optimal solution for the sintering process. Thanks to their solid construction in a compact free-standing model, these high-temperature furnaces are suitable for processes in the laboratory where maximum precision is required. Excellent temperature uniformity and sensible details set unsurpassable quality standards. Tmax 1600 °C Double-walled housing construction with fan cooling, resulting in low outer wall temperature Heating from both sides via molybdenum disilicide heating elements High-quality fibre insulation with special rear i ...

1000 me, used, Operating pressure: 1000 bar, Flow rate: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Operating hours: approx.: 181 h, Trolly, incl. gun, 10 m HD hose,

Three Grundfos multistage high-pressure centrifugal pumps are available. 1) Grundfos CR8 100 A-A-A-AUUE, max. pumped material temperature: 120°C (150°C), speed: 2900 rpm, flow rate: 11m³/h, delivery head: 100m, machine diameter and height: 180mm/600mm, weight: approx. 55kg. 2) Grundfos CR 16-30 A-F-A-BUBE, flow rate: 16m³/h, max. delivery head: 34.4m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/800mm, weight: approx. 60kg. 3) Grundfos CRV2-150 A-O-6-BUBE, flow rate: 2.5m³/h, max. delivery head: 92.2m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/400mm, weight: approx. 60kg. Documentation available. On-site inspection is possible.

Vertical Multistage High Pressure Centrifugal Pump GRUNDFOSNome pump, but part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-Vyear approx. 2012Flow rate at 7.2 bar: max. 10 m3/hDischarge height: max. 91.8 metersGrid connection: 400 volts, 50 HzPower: 3 kW- pump structure in 9 stages- made of stainless steel 1.4401- The pump in mint condition was used as a spare parts dispenser, but there are several new pump chambers- part of the magnetic coupling is missingsuitable for drinking water supply, irrigation

High-current EMC filter SCHAFFNER type FS 20364-1200-993 phases, 3 x AC ballast, mains connection module, mains filterInput voltage: 3 x 400 VACEinput frequency: 50 / 60 Hz.Nominal current: 3 x 1200 AAndimension W x H x D: 135 x 260 x 235 mmWeight: 27.5 Kgvery good condition, from stock liquidation, unused2 pieces available, price per piece; used

Quick-opening milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000speed max. 15000 rpm at 70% EDratio ratio 1:5Power transmission up to approx. 2.5 kWProduct dimension 110 mm (machine spindle to clamping nutTool holder MK4 with tightening thread M16Collets type OZ16 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mmWeight 6.5 kgGood condition; used

Klaaßen SDM15-5 turning machining centre, The top lathe we offer has the following in the basic configuration Technical parameters: ▪ SDM 4-5 CNC 4-Panel Bed Precision Lathe - Z-travel (slide longitudinal)= 5,000 mm (6,000 with TAE3) X-travel (face slide transverse)= 1,000 mm Y-axis (vertical movement)= 350 mm Maximum workpiece Ø = 1,500 mm Circulation diameter over face slide = 1,500 mm - Center width = 4,500 mm (5,500 with TAE3) ▪ CNC machine designed as a 4-lane tip lathe with full drive-over of the Bezels and superstructures - - - Cross slides and face slides restrict the diameter range by lateral arrangement on the lathe bed. As a result, there is no accompanying Diameter restriction above the face slide/tool carrier. Cross slide unit can be fully attached to the steady rests, HSSL and tailstock. This significantly reduces the set-u ...

MÜGA high-speed drilling-milling centre TYPE: S 3030 with 2-fold pallet changer incl. chip conveyor (similar to FANUC or BROTHER) Control: MITSUBISHI M70 Travel: X/Y/Z: 300 x 250 x 250 mm Spindle speed: 60 – 10,000 rpm. Motor power: 100//30% ED 2.2/3.7 kW Star turret: 12-speed Tool change time: 1.6 sec. Chip-to-chip time: 2.5 sec. Tool holder: BT 30 - 45° 2-fold pallet table: LxW: 400 x 250 mm Chip conveyor ejecting backwards Rapid traverse: X/Y/Z: 48/48/60 m/min. Installation area: L x W x H: 2690 x 1570 x 2370 mm Weight: 3300 kg Total connected load: 11.5 kW Description: The machine is suitable due to the 2-fold pallet system, as well as the high rapid traverses and fast chip-to-chip time for series part production. From 2011 to 2020, it was used in single-shift operation exclusively for ALU machining. There is no hour meter. The machine is still un ...