high temperature used for sale

Tested, Lowers Temperature Auction-ID: A1-51251-19

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirt This 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 28,900 litres Material: stainless steel 304 Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18 Roof Central chimney height 500 mm Ferrule Door 600×800 with mud flap 850 mm from the ground with winch system Valve in 70 2 Valves in 50 Winding pipes in 70 and 50 12 regulation rings 1 taster 1 dial thermometer Bottom Sloping bottom ...

Scratches on the handle. Auction-ID: A1-51251-146

610 hL (260 + 175 + 175 hL) – Martinez Sole – Temperature-controlled 304 stainless steel tank with sloping bottom on legs Technical characteristics Vertical cylindrical tank on feet Brand Martinez Sole Flat bottom tank on superimposed legs Capacity: 260 hl + 175 hl +175 HL Material: 304 Interior finish: cold rolled raw Exterior finish: BLAF2B Year 2003 SOLD without accessories, valves or doors Roof Central chimney Hatch Ø 500 with clamping studs 1 winding pipe Gangway support Ferrule Door 1000 x 800 stainless steel door with guillotine opening, with mud flap In clear draft, stainless steel ball valve Ø 70 Stainless steel taster Channel thermoregulation circuit 8 m2 1 level with strip Bottom Self-emptying spoon bottomIn total emptying, stainless steel ball valve Ø 70 Roof Off-centre chimney Hatch Ø 500 Ferrule Door 310 x 420 oval stainless steel autoclave with internal openin ...

120 hL – BSA – Thermoregulated self-emptying cylindrical-conical stainless steel tank on legs This BSA stainless steel tank with a capacity of 120 hL is designed for the storage of liquids in a wine-growing environment. Its configuration, combined with a vertical cylindrical-conical shape on legs, a self-emptying door and internal flag thermoregulation, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristics Vertical cylindrical-conical stainless steel tank on closed legs Brand: BSA Capacity: 12,000 litres Material: stainless steel Conical roof central hatch Diameter 620 mm 2 taps on chimney DN 50 mm 2 taps fluted outlet for DN 20 mm flag 2 free taps DN 20 mm Ferrrule 1 tubular flag Bottom Cylindrical-conical bottom 1 tap 2 partial drains on square flange 100 x 100 with bu ...

245 hL – Pierre Guerin – Temperature-controlled 304 stainless steel tank with sloping bottom This PIERRE GUERIN 304L stainless steel storage tank with a capacity of 245 hL is designed for the storage of liquids in wine, brewing and cider environments. Its configuration, combined with a flat floor on legs, a central chimney and shell circuit thermoregulation, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristics Brand: PIERRE GUERIN Material: 304L stainless steel Total capacity: 24,500 liters Thermoregulated Interior finish: cold rolled raw Exterior finish: brushed Roof Lifting rings 1 central chimney with PVC DN 500 hatch with clamping studs 1 tap for temperature probe1 50 Mâcon tap on chimney, internally / externally threaded Ferrule walkway support 1 stainless steel doo ...

289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirt This 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 28,900 litres Material: stainless steel 304 Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18 Roof Central chimney height 500 mm Ferrule Door 600×800 with mud flap 850 mm from the ground with winch system Valve in 70 2 Valves in 50 Winding pipes in 70 and 50 12 regulation rings 1 taster 1 dial thermometer Bottom Sloping bottom ...

289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirt This 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 28,900 litres Material: stainless steel 304 Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18 Roof Central chimney height 500 mm Ferrule Door 600×800 with mud flap 850 mm from the ground with winch system Valve in 70 2 Valves in 50 Winding pipes in 70 and 50 12 regulation rings 1 taster 1 dial thermometer Bottom Sloping bottom ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

245 hL – Pierre Guerin – Temperature-controlled 304 stainless steel tank with sloping bottom This PIERRE GUERIN 304L stainless steel storage tank with a capacity of 245 hL is designed for the storage of liquids in wine, brewing and cider environments. Its configuration, combined with a flat floor on legs, a central chimney and shell circuit thermoregulation, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristics Brand: PIERRE GUERIN Material: 304L stainless steel Total capacity: 24,500 liters Thermoregulated Interior finish: cold rolled raw Exterior finish: brushed Roof Lifting rings 1 central chimney with PVC DN 500 hatch with clamping studs 1 tap for temperature probe1 50 Mâcon tap on chimney, internally / externally threaded Ferrule walkway support 1 stainless steel doo ...

120 hL – BSA – Thermoregulated self-emptying cylindrical-conical stainless steel tank on legs This BSA stainless steel tank with a capacity of 120 hL is designed for the storage of liquids in a wine-growing environment. Its configuration, combined with a vertical cylindrical-conical shape on legs, a self-emptying door and internal flag thermoregulation, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristics Vertical cylindrical-conical stainless steel tank on closed legs Brand: BSA Capacity: 12,000 litres Material: stainless steel Conical roof central hatch Diameter 620 mm 2 taps on chimney DN 50 mm 2 taps fluted outlet for DN 20 mm flag 2 free taps DN 20 mm Ferrrule 1 tubular flag Bottom Cylindrical-conical bottom 1 tap 2 partial drains on square flange 100 x 100 with bu ...

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

220 hL – Lagouarde – Temperature-controlled 304 stainless steel tank with flat bottom and casing This LAGOUARDE temperature-controlled stainless steel storage tank with a capacity of 220 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical configuration, combined with a flat bottom with casing and its flag thermoregulation equipment, makes it a practical, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Vertical cylindrical tank Brand: LAGOUARDE Total capacity: 22,000 litres Material: stainless steel Thermoregulated Roof Eccentric chimney on the front with hatch Ferrule 1 rectangular door external opening 1 partial drain valve on square flange Thermoregulated: flag Flat bottom with housing 1 total drain valve on square flange Dimensions Diameter: 2500 mm ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

360 hL – Vautier – Temperature-controlled 304 stainless steel tank with flat bottom inclined 22% on skirt This 360 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and agri-food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its temperature-regulating equipment, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical data Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 36,000 litres Material: stainless steel 304 Tanks N°: 1; 2; 3 and 4 Roof Chimney chimney ø 600 Shell Rectangular door with external opening 800×600 with mud flap and 10 closing points 2 valves ø 50 1 valve ø 70 Dial thermometerLevel gauge Winding tubing ø 70 2 flat flags 4 regulation rings Temperature probe ...

610 hL (260 + 175 + 175 hL) – Martinez Sole – Temperature-controlled 304 stainless steel tank with sloping bottom on legs Technical characteristics Vertical cylindrical tank on feet Brand Martinez Sole Flat bottom tank on superimposed legs Capacity: 260 hl + 175 hl +175 HL Material: 304 Interior finish: cold rolled raw Exterior finish: BLAF2B Year 2003 SOLD without accessories, valves or doors Roof Central chimney Hatch Ø 500 with clamping studs 1 winding pipe Gangway support Ferrule Door 1000 x 800 stainless steel door with guillotine opening, with mud flap In clear draft, stainless steel ball valve Ø 70 Stainless steel taster Channel thermoregulation circuit 8 m2 1 level with strip Bottom Self-emptying spoon bottomIn total emptying, stainless steel ball valve Ø 70 Roof Off-centre chimney Hatch Ø 500 Ferrule Door 310 x 420 oval stainless steel autoclave with internal openin ...

610 hL (260 + 200 + 150 hL) – Martinez Sole – Temperature-controlled 304 stainless steel tank with sloping bottom on legs Technical characteristics Vertical cylindrical tank on legs Martinez Sole Brand Flat bottom inclined tank on superimposed legs Capacity: 260 hl + 200 hl + 150 HL Material: 304 Interior finish: cold rolled raw Exterior finish: BLAF2B year 2003 SOLD without accessories, valves or doors Roof Central chimney Hatch Ø 500 with clamping studs 1 winding pipe Gangway support Ferrule Door 1000 x 800 stainless steel door with guillotine opening, with mud flap In clear draft, stainless steel ball valve Ø 70 Stainless steel taster Channel thermoregulation circuit 8 m2 1 level with strip Bottom Self-emptying spoon bottomIn total emptying, stainless steel ball valve Ø 70 Roof Off-centre chimney Hatch Ø 500 Ferrule Door 310 x 420 oval stainless steel autoclave with inter ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

138 hL – ETA – Temperature-controlled 304 stainless steel tank with a sloping flat bottom on a stainless steel base This 304L stainless steel temperature-controlled storage tank with a capacity of 138 hl is designed for the storage of liquids in the wine and food industry. Its configuration, combined with a sloping flat bottom on a stainless steel base, a brushed exterior finish and its thermoregulation system by internal coil radiator, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristics Brand: ETA Material: 304L stainless steel Total capacity: 13,800 litres Temperature-controlled tank Interior finish: raw rolled, stripped and passivated Exterior finish: brushed, stripped and passivated Roof Drain socket with plug 1 chimney chimney chimney Shell 1 ladder support bar 1 tap  ...

289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirt This 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 28,900 litres Material: stainless steel 304 Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18 Roof Central chimney height 500 mm Ferrule Door 600×800 with mud flap 850 mm from the ground with winch system Valve in 70 2 Valves in 50 Winding pipes in 70 and 50 12 regulation rings 1 taster 1 dial thermometer Bottom Sloping bottom ...

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...

JRI Spy RF N1 – Wireless Temperature Logger Manufacturer: JRI Model: Spy RF N1 Part Number: 06428 Type: RF Wireless Temperature Data Logger with LCD Display Usage: Cold Chain, Refrigerators/Freezers, Laboratories, Pharmacies Condition: Very Good Condition Auction-ID: A1-51275-166

Key data: 140 °C, 6 kW, 45 W

Type WTD-6, make Weinreich, year 2011 Heating capacity 6 kW, cooling capacity 45 kW at 90°C

Item number: 1761655-81 Serial number: LA-3811-G Electrical connection: 440 V AC Phases: 3/PE Maximum oil temperature: 180 °C Maximum operating pressure: 0.6 MPa / 6 bar Test pressure: 2.25 MPa / 22.5 bar Oil volume: 9.4 liters Auction-ID: A1-51285-426

Temperature Thermoregulators Type: Temperature control units Application: Industrial temperature regulation Temperature range: Typically between -50°C and 400°C Control accuracy: High precision, with minimal variation of approx. 0.1°C to 1°C Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-80

THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-210

HUBER - CC2 Compatible Control + CFC & H-CFC free Thermostatically controlled thermal and bath regulator Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. A prior exhibition is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See General Terms and Conditions of Sale Auction-ID ...

Auction-ID: A1-51062-288

Seca mVSA 535 – Monitoring monitor (SpO2, temperature, NIBP) Manufacturer: Seca Model: mVSA 535 The seca mVSA 535 is the world's first spot-check-monitor that combines classic vital signs measurement and bioimpedance analysis (BIA). It allows you to determine in a single process: Four vital signs Blood pressure SpO2 Pulse Temperature Bioimpedance analysis Fat mass, Muscle mass, Water mass, Phase angle A routine examination now allows more parameters to be checked and the diagnostic and treatment possibilities to be expanded thanks to the combined evaluation of BIA and vital signs. The powerful software communicates with any type of network and ensures the reliable transmission of all measured values to your EMR (Electronic Medical Record) system. If necessary, our integration service supports you in integrating the system into your IT infrastructure to optimize your daily examin ...

High pressure - piston pump Flow water pump Manufacturer: UDOR Type: GAMMA 162 TS 1C. Detailed information on the manufacturers page, see pictures. Condition: Used, fully functional Scope of delivery: see the pictures.

KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Degree of protection: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our shop! International shipping costs on request!

Batch of high-quality stainless steel pressure hoses with ball valve Auction-ID: A1-50936-54

Offer of a high-bay warehouse with approx. 2,500 parking spaces. Shelf stand approx. 6.00 m high All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Price ...

Various Shelf stand approx. 4.00 meters to 6.00 meters Pallet carrier We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other ...

Offer shelf storage: 500 plots Storage weight up to about 1 ton per pallet. The pictures are vopn of a similar plant. Very good condition can still be visited. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded.  ...

On behalf of you, we can offer you: A Location Storage area 10,000 m2 up to 15 meters high With shelf stock All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expr ...

High-pressure link pump with sliding ring seal - unused - (only one test run) self-priming, multi-stage Manufacturer: Dickow Type: HZS 1023 Built: 1986 Conveyor medium: Fuels Capacity: 60 m3/h Head: 60 m Power: 13.9 kW Temperature: 20C Application: Diesel - 3-stage pump of 60-120 m3 adjustable - impeller diameter 236 mm, - 1,450 rpm - EX-gun motor, 10.5 kW (Felton & Geom) General The self-priming, single- or multi-stage DICKOW link pump has been specially developed for the conveying of hydrocarbons in refuelling plants. HZS pumps are used in tank depots, for emptying tank wagons, filling high tanks, in hydrant systems at airfields, in airfields and many other applications where geodesic suction heights have to be overcome. The performance characteristic field has been graded in such a way that the most favourable efficiency is achieved in all application ...

Carrier Turbo Cold Water Kit, 19XR5251467, Y.O.M. 2800KW cooling capacity, from 20%-100% adjustable, latest model, very efficient, very good condition, ready to use immediately.

Machine number: 3728-87 Grinding length 2000 mm (Roll grinding machine)

High speed press Original Manufacturer by: BRUDERER Type: BSTA 30 Technical data: Stroke power 300 KN (30 tons) Adjustable speed 100 - 600 strokes per minute up to 10 strokes in one second Equipped with synchronized BBV feeder Feed pitch up to max. 60 mm adjustable, highly accurate With PLC control Three working mode: single punch, complete stroke and full automatic Emergency stop Pneumatic clutch and brake Weight approx 2.5t Automatic in feed, fully synchronized with punching moment Tool and coiler not included (price on request) Technical Air 8 bar Operators instruction manual Machine with new CE certificate Overhauled - Rebuilt by Silicon plus

Power of the engine: 6.5 HP. Sl ė gis: 160 bar. Water access: 170 l/h. arna: 10 m.

3 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -4 Stand / 6 bars -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 150 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial custom ...

Junction box for 10-30kV power cable. Explosion and water proof. Make: Gothe & Co Model: 73110-22-150-28-04 Year: 2009 - NEW, never used. Capacity: 10kV 340Ampere 150mm2 IP67 Comes complete, unused, with all couplings etc. Including testing sheet. New factory price approx. Euro 2250,- each. Ask us for competitive price! Description casing and cover of steel sheet 3mm, the casing is provided with 3 ceramic terminal sockets to connect cables and conductors up to 150mm², internal and external earthings, sidebox is provided for connecting supervising and control conductors up to 6mm², option optical fibres

14 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -15 Stand / 28 bars -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU countries (Austria, Italy etc.) with appropriate VAT number (E.g. AT/IT) will each receive a net ...