high temperature used for sale

Designation according to the nameplate: MW-Power-Supply Input: 3x 400V AC, 3x 15A Output: 2x -5100V, 2x 1.6A Output power: 2x 8.16kVA Two separate high-voltage outputs X3 and X4 with ground connections X5/X6 Power connector X1 (4-pin, plug-in terminal) Protective Conductor X2 Interfaces: X10 and X11 (D-Sub 9-pin), CAN-ID selector switch (DIP) Control terminals X7 (3-pin), X8 and X9 (10-pin each) Fuse Holder F2 Water cooling with IN/OUT connections (quick coupling nipple) Year of manufacture: 06/2018 Accessories: Pluggable mating plugs on X1, X7, X8 and X9. Auction-ID: A7-52036-106

new and unused charger in orig. for batteries with 300-500Ah capacity. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, without Rema plug Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-51819-2450

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug for batteries with 150-400Ah possible Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-51819-2431

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug and 160A Rema plug officially for batteries with 300-500Ah, but works up to 800Ah Delivery by freight forwarder possible on request. Auction-ID: A1-51819-4851

Power circuit: 3x400V AC, 50/60Hz, 3x19A, 13.2kVA, mains tolerance ±10%, recommended pre-fuse 25A C-characteristic Control circuit: 24V DC, 2A, 48VA, recommended pre-fuse 6.3A C characteristic Output (nameplate): 2x 5100V anode voltage, 2x 1.6A Microwave data according to the manual: Anode voltage 2x -5100V DC, anode current 2x -900mA, frequency 2x 2450MHz, MW power 2x 3kW CW / 4.5kW pulse (max. average power per channel 3kW) 2 channels for two magnetron heads (HV connectors X3/X4, magnetron ground X5/X6) Interface: CAN bus (X10/X11, Sub-D 9) with DIP switch for CAN-ID Power connector X1 (7-pin), control voltage X7, signal connector magnetron heads X8/X9, PE connector X2 Motor circuit breaker F1, fuse control voltage F2 Cooling: Water 4l/min, 4bar, 20-25°C, connection closure coupling 87KBIW13MVX G1/4x9mm, additional 2 fans ebm-papst 4184 NXH (24V DC, 11W) Degree of protection: IP20 We ...

Spoon width: 560mm, Electrically adjustable. Equipped with: battery with built-in LED and safe battery compartment. Auction-ID: A1-51283-88

Manufacturer: OMEGA Year: 1990 Type: High-capacity CNC vertical machining center Numerical control: FANUC 15M Axes: 3-axis (X, Y, Z) Strokes: X 1650 mm / Y 850 mm / Z 790 mm Table: 1900 x 850 mm Spindle: BT50 – up to 6000 rpm – gearbox 2 ranges Tool magazine: 30 positions Weight: approx. 15000 kg Notes: Heavy duty CNC vertical machining center, suitable for intensive machining and large workpieces. Auction-ID: A1-52185-4049

Approx. 110 pieces, incl. pallet Auction-ID: A1-51519-1131

Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-52172-249

HIGHTOP HH12 Mini Excavator – New – 1200 kg – 3 Buckets – Joysticks HIGHTOP compact mini excavator model HH12, in new condition, ideal for earthworks, foundations, outdoor landscaping and narrow accesses. ⚙️ Features: Operating weight: 1200 kg Width: 100 cm Engine: KOOP Diesel Power: 10 HP (7 kW) Starting: Electric Controls: Side Sticks Deflection: Yes Inverted cylinder: Yes Digging depth: ± 185 cm Translation: Rubber tracks Grading Blade: Yes Equipment: Mechanical quick coupler Double-acting hydraulic outputs Work light Side Sticks 3 buckets: 20 cm 40 cm 100 cm Extra bucket included (see photos) Status: New machine, never used or very little. No visible damage. Hydraulics, structure and accessories in excellent condition. i️ Additional information: Compact machine, ideal for narrow passages Simple and ergonomic operation Ready to use Auction-ID: A3-46119-33136

Spoon width: 560mm, Electrically adjustable. Equipped with: battery with built-in LED and safe battery compartment. Auction-ID: A1-51283-92

Hightop N12 Mini Excavator – New – 2026 – 1200 kg – Boom Offset – 3 Buckets Hightop compact mini excavator, model N12, in new condition – never used, ideal for earthmoving, trenching and outdoor landscaping. Versatile machine with boom offset allowing precise work along walls and obstacles. Technical characteristics: Brand: Hightop Model: N12 Year: 2026 Condition: New (never used) Operating weight: 1200 kg Width: 99 cm Engine : Diesel KOOP Power: approx. 12 hp (manufacturer data not verified) Cooling: Hydraulic oil cooler Starting: Electric Operator's Position: Canopy (roll bar) Rotation: 360° turret Travel: rubber tracks Boom: with lateral offset Controls: Dual hydraulic channels Equipment and options: Auxiliary hydraulic outputs Front levelling blade Work light Mechanical thumb Mechanical quick coupler 20 cm bucket 40 cm bucket 100 cm bucket Status and observations: Ne ...

Spoon width: 560mm, Electrically adjustable. Equipped with: battery with built-in LED and safe battery compartment. Auction-ID: A1-51283-89

HIGHTOP HH12 Mini Excavator – New – 1200 kg – 3 Buckets – Joysticks HIGHTOP compact mini excavator model HH12, in new condition, ideal for earthworks, foundations, outdoor landscaping and narrow accesses. ⚙️ Features: Operating weight: 1200 kg Width: 100 cm Engine: KOOP Diesel Power: 10 HP (7 kW) Starting: Electric Controls: Side Sticks Deflection: Yes Inverted cylinder: Yes Digging depth: ± 185 cm Translation: Rubber tracks Grading Blade: Yes Equipment: Mechanical quick coupler Double-acting hydraulic outputs Work light Side Sticks 3 buckets: 20 cm 40 cm 100 cm Extra bucket included (see photos) Status: New machine, never used or very little. No visible damage. Hydraulics, structure and accessories in excellent condition. i️ Additional information: Compact machine, ideal for narrow passages Simple and ergonomic operation Ready to use Auction-ID: A3-46119-33137

High Pressure Metal Hose Reel Brand: Kremer Length: 15 meters Max. pressure: 280 bar Hose: braided hose with quick couplings Equipped with: auto-stop function Suitable for: Wall mounting Condition: Unused and in the original packaging Auction-ID: A1-52330-270

Hightop N12 Mini Excavator – Year 2026 – New – Width 99 cm – 2 buckets Hightop brand compact mini excavator, model N12, year 2026, in new condition – never used. Ideal machine for earthworks, landscaping, light foundations and restricted access thanks to its compact width. Technical characteristics: Brand: Hightop Model: N12 Year: 2026 Condition: New (never used) Width: 99 cm Engine : Diesel KOOP Starting: Electric Operator's Position: Canopy (roll bar) Rotation: 360° turret Translation: Rubber tracks Boom Foot: Fixed Controls: Dual hydraulic channels Equipment and options: Auxiliary hydraulic outputs Front levelling blade Work light 40 cm bucket 100 cm bucket Hydraulic joystick controls Built-in tool chest Status and observations: New machine – never used Seat, levers and components still protected (visible plastic films) No play or wear observed Hydraulics in perfect c ...

Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-52172-149

Hightop N12 Mini Excavator – New – 2026 – 1200 kg – Boom Offset – 3 Buckets Hightop compact mini excavator, model N12, in new condition – never used, ideal for earthmoving, trenching and outdoor landscaping. Versatile machine with boom offset allowing precise work along walls and obstacles. Technical characteristics: Brand: Hightop Model: N12 Year: 2026 Condition: New (never used) Operating weight: 1200 kg Width: 99 cm Engine : Diesel KOOP Power: approx. 12 hp (manufacturer data not verified) Cooling: Hydraulic oil cooler Starting: Electric Operator's Position: Canopy (roll bar) Rotation: 360° turret Travel: rubber tracks Boom: with lateral offset Controls: Dual hydraulic channels Equipment and options: Auxiliary hydraulic outputs Front levelling blade Work light Mechanical thumb Mechanical quick coupler Inverted cylinder 20 cm bucket 40 cm bucket 100 cm bucket Status and ...

Please note! Lifting mechanism does not work completely. Auction-ID: A1-51283-83

Robust tandem agricultural trailer with a high body, intended for the transport of agricultural products, bulk or materials. Equipped with 2 axles with leaf suspension, large tyres with agricultural profile and a large capacity metal body with extensions to increase the load volume. The trailer has hydraulic connections at the front as well as a hydraulic system with side cylinder. Braking system present on the axles. Equipment: • Double axle / tandem • High capacity metal crate • Metal extensions • Hydraulic connections • Side hydraulic cylinder • Leaf suspension • Axle braking • Large agricultural tyres • Heavy-duty drawbar • Front parking stand • Heavy steel construction Second-hand condition with significant traces of use. Presence of corrosion, oxidation and peeling paint on various elements of the body and chassis. Visible wear on the tyres. The ope ...

Please note! Lifting mechanism does not work completely. Auction-ID: A1-51283-82

Hightop N12 Mini Excavator – Year 2026 – New – Width 99 cm – 2 buckets Hightop brand compact mini excavator, model N12, year 2026, in new condition – never used. Ideal machine for earthworks, landscaping, light foundations and restricted access thanks to its compact width. Technical characteristics: Brand: Hightop Model: N12 Year: 2026 Condition: New (never used) Width: 99 cm Engine : Diesel KOOP Starting: Electric Operator's Position: Canopy (roll bar) Rotation: 360° turret Translation: Rubber tracks Boom Foot: Fixed Controls: Dual hydraulic channels Equipment and options: Auxiliary hydraulic outputs Front levelling blade Work light 40 cm bucket 100 cm bucket Hydraulic joystick controls Built-in tool chest Status and observations: New machine – never used Seat, levers and components still protected (visible plastic films) No play or wear observed Hydraulics in perfect c ...

Auction-ID: A1-51283-8

Ford Transit 260 high-roof closed panel van, year 2008. VIN: WF0XXTTFX8S50004. Registration no.: AOKN-995. Permissible gross weight: 2,600 kg. Equipped with roof rack, rear ladder and tow hitch. Mileage, engine specification, fuel type, power output and transmission could not be reliably established from the available information. Used condition with age- and use-related wear. Offered in its current condition as shown in the photographs. Functionality, roadworthiness and completeness have not been independently verified. Auction-ID: A1-51215-2

Spoon width: 560mm, Electrically adjustable. Equipped with: battery with built-in LED and safe battery compartment. Auction-ID: A1-51283-90

HIGHTOP HH12 Mini Excavator – New – 1200 kg – 3 Buckets – Joysticks HIGHTOP compact mini excavator model HH12, in new condition, ideal for earthworks, foundations, outdoor landscaping and narrow accesses. ⚙️ Features: Operating weight: 1200 kg Width: 100 cm Engine: KOOP Diesel Power: 10 HP (7 kW) Starting: Electric Controls: Side Sticks Deflection: Yes Inverted cylinder: Yes Digging depth: ± 185 cm Translation: Rubber tracks Grading Blade: Yes Equipment: Mechanical quick coupler Double-acting hydraulic outputs Work light Side Sticks 3 buckets: 20 cm 40 cm 100 cm Extra bucket included (see photos) Status: New machine, never used or very little. No visible damage. Hydraulics, structure and accessories in excellent condition. i️ Additional information: Compact machine, ideal for narrow passages Simple and ergonomic operation Ready to use Auction-ID: A3-46119-33131

High Pressure Metal Hose Reel Brand: Kremer Length: 15 meters Max. pressure: 280 bar Hose: braided hose with quick couplings Equipped with: auto-stop function Suitable for: Wall mounting Condition: Unused and in the original packaging Auction-ID: A1-52330-189

Hightop N12 Mini Excavator – Year 2026 – New – Width 99 cm – 2 buckets Hightop brand compact mini excavator, model N12, year 2026, in new condition – never used. Ideal machine for earthworks, landscaping, light foundations and restricted access thanks to its compact width. Technical characteristics: Brand: Hightop Model: N12 Year: 2026 Condition: New (never used) Width: 99 cm Engine : Diesel KOOP Starting: Electric Operator's Position: Canopy (roll bar) Rotation: 360° turret Translation: Rubber tracks Boom Foot: Fixed Controls: Dual hydraulic channels Equipment and options: Auxiliary hydraulic outputs Front levelling blade Work light 40 cm bucket 100 cm bucket Hydraulic joystick controls Built-in tool chest Status and observations: New machine – never used Seat, levers and components still protected (visible plastic films) No play or wear observed Hydraulics in perfect c ...

Spoon width: 560mm, Electrically adjustable. Equipped with: battery with built-in LED and safe battery compartment. Auction-ID: A1-51283-91

Mercedes-Benz Sprinter 516 CDI high-roof closed panel van. The engine has undergone a complete overhaul. Registration no.: AO-LU-238. Odometer reading recorded during inspection: 223,762 km. Manual transmission. Equipped with tow equipment/rear step and plywood-lined cargo area. Used condition with age- and use-related wear. Offered in its current condition as shown in the photographs. Functionality, roadworthiness, mileage and completeness have not been independently verified. Auction-ID: A1-51215-5

1 window is missing Auction-ID: A1-51283-9

Hightop N12 Mini Excavator – New – 2026 – 1200 kg – Boom Offset – 3 Buckets Hightop compact mini excavator, model N12, in new condition – never used, ideal for earthmoving, trenching and outdoor landscaping. Versatile machine with boom offset allowing precise work along walls and obstacles. Technical characteristics: Brand: Hightop Model: N12 Year: 2026 Condition: New (never used) Operating weight: 1200 kg Width: 99 cm Engine : Diesel KOOP Power: approx. 12 hp (manufacturer data not verified) Cooling: Hydraulic oil cooler Starting: Electric Operator's Position: Canopy (roll bar) Rotation: 360° turret Travel: rubber tracks Boom: with lateral offset Controls: Dual hydraulic channels Equipment and options: Auxiliary hydraulic outputs Front levelling blade Work light Mechanical thumb Mechanical quick coupler 20 cm bucket 40 cm bucket 100 cm bucket Status and observations: Ne ...

High Pressure Metal Hose Reel Brand: Kremer Length: 15 meters Max. pressure: 280 bar Hose: braided hose with quick couplings Equipped with: auto-stop function Suitable for: Wall mounting Condition: Unused and in the original packaging Auction-ID: A1-52330-84

Hightop N12 Mini Excavator – New – 2026 – 1200 kg – Boom Offset – 3 Buckets Hightop compact mini excavator, model N12, in new condition – never used, ideal for earthmoving, trenching and outdoor landscaping. Versatile machine with boom offset allowing precise work along walls and obstacles. Technical characteristics: Brand: Hightop Model: N12 Year: 2026 Condition: New (never used) Operating weight: 1200 kg Width: 99 cm Engine : Diesel KOOP Power: approx. 12 hp (manufacturer data not verified) Cooling: Hydraulic oil cooler Starting: Electric Operator's Position: Canopy (roll bar) Rotation: 360° turret Travel: rubber tracks Boom: with lateral offset Controls: Dual hydraulic channels Equipment and options: Auxiliary hydraulic outputs Front levelling blade Work light Mechanical thumb Mechanical quick coupler Inverted cylinder 20 cm bucket 40 cm bucket 100 cm bucket Status and ...

Order picker Linde. Ideal for use, also as picking goods Or as a cherry picker in a shed. With initial levy. Forks included (currently not on the device). Headroom : 3.87 m Picking height : 7.50 m Lifting capacity : 1000 kg. With charger. Auction-ID: A3-46118-11337

HIGHTOP HH12 Mini Excavator – New – 1200 kg – 3 Buckets – Joysticks HIGHTOP compact mini excavator model HH12, in new condition, ideal for earthworks, foundations, outdoor landscaping and narrow accesses. ⚙️ Features: Operating weight: 1200 kg Width: 100 cm Engine: KOOP Diesel Power: 10 HP (7 kW) Starting: Electric Controls: Side Sticks Deflection: Yes Inverted cylinder: Yes Digging depth: ± 185 cm Translation: Rubber tracks Grading Blade: Yes Equipment: Mechanical quick coupler Double-acting hydraulic outputs Work light Side Sticks 3 buckets: 20 cm 40 cm 100 cm Extra bucket included (see photos) Status: New machine, never used or very little. No visible damage. Hydraulics, structure and accessories in excellent condition. i️ Additional information: Compact machine, ideal for narrow passages Simple and ergonomic operation Ready to use Auction-ID: A3-46119-33130

bore capacity in steel (diameter):45 mm WORKING RANGE -BORING-:. - drilling capacity full bore (steel):45 mm - drilling capacity full bore (cast iron):55 mm - horizontal travel:1050 mm - vertical travel:450 mm - sleeve stroke:200 mm WORKING SPINDLE / HEAD:. - spindle revolutions (min):15 /min - spindle revolutions (max):2800 /min - number of gears:2 - taper fixture : MK 4 :. - spindle power (continuous):5.5 kW - torque (max.):250 Nm - max. distance spindle ... clamping surface:710 mm - thread cutting attachment : yes :. TABLE:. - clamping surface (left-right):1200 mm - clamping surface (front-back):750 mm ELECTRICAL SPECIFICATIONS:. - total power consumption:7 kW - mains power supply:9.3 kVA - mains voltage:400 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - space requirements length:3000 mm - space requirements width:3000 mm - total height:3000 mm - total weigh ...

Hightop N12 Mini Excavator – Year 2026 – New – Width 99 cm – 2 buckets Hightop brand compact mini excavator, model N12, year 2026, in new condition – never used. Ideal machine for earthworks, landscaping, light foundations and restricted access thanks to its compact width. Technical characteristics: Brand: Hightop Model: N12 Year: 2026 Condition: New (never used) Width: 99 cm Engine : Diesel KOOP Starting: Electric Operator's Position: Canopy (roll bar) Rotation: 360° turret Translation: Rubber tracks Boom Foot: Fixed Controls: Dual hydraulic channels Equipment and options: Auxiliary hydraulic outputs Front levelling blade Work light 40 cm bucket 100 cm bucket Hydraulic joystick controls Built-in tool chest Status and observations: New machine – never used Seat, levers and components still protected (visible plastic films) No play or wear observed Hydraulics in perfect c ...

bore capacity in steel (diameter):1-13 mm arm length:100 mm workpiece height max.:400 mm total power requirement:3 kW dimensions of the machine ca.:2.0 x 1,2 x 2,2 m bore spindle turning speed range:0-3000 U/min boring spindle drive:2,2 kW max. Y-axis travel:550 mm max. Z-axis travel:300 mm The machine has a 2.2 kW spindle motor with a 2-stage gearbox for drilling and tapping. Table size is 100 x 50 cm Stroke length approx. 200 mm

Offer 26318 Technical data: - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 - Tapping device - Drilling spindle stroke 140 mm - Drilling spindle speeds - 9 steps 180 - 2000 rpm - Clockwise / counterclockwise rotation - 4 pcs feeds 0.08 - 0.32 mm/rev - Projection 280 mm - Table with 4 T-slots 600 x 400 mm - Height-adjustable via hand crank - Height-adjustable drilling unit via hand crank - Max. distance table - drilling spindle approx. 700 mm - Max. distance from base plate to drilling spindle 1100 mm - Drive 400 V / 3 kW - Emergency stop button - Coolant device - Space requirement approx. W 700 x H 2100 - 2400 x D 960 mm - Weight approx. 800 kg