high temperature used for sale

Equipped with 2 separately opening side doors and end door; lock case; unused Auction-ID: A1-40104-141

Equipped with 4 separately opening side doors and end door; lock case; maximum loading capacity 24 Tons; unused Auction-ID: A1-40104-140

painted steel frame, shock-resistant protective cover, 4 large wheels, folding front cover for easy access to components, ECO mode (automatic 60 °C, approx. 25% less fuel consumption and emissions), control panel with signal and indicator lights, stepless pressure control, fuel tank 18 litres, storage space for gun/lance/hose and nozzles, stainless steel burner boiler 40 kW, 4-pole asynchronous air-cooled electric motor with thermal protection (S1, maintenance-free), fuel level indication, radial crankshaft pump with brass pump head and ceramic plungers, pressure gauge, adjustable working pressure, water softening tank 2 liters, DTS delayed falling stop system, IASF automatic shut-off after 20 min standstill, FLC fuel level control, MLC micro-leakage control, DRP dry-run protection, NCC nozzle blockage check, HBLS LED signals, MCL maintenance control lamp, FPS non-return valve, IBD dela ...

Modern ergonomic design, powder-coated steel frame (corrosion-resistant and robust), high-quality materials (stainless steel combined with double-walled rotomoulded polyethylene, impact and scratch resistant), double lance holder, large rear wheels, height-adjustable push handle (100–110 cm), easy-to-store power cable, radial high-pressure pump with 3 all-ceramic plungers and stainless steel valves (low-vibration and noise-reducing), electric motor with low speed approx. 1450 rpm, automatic start/stop system with delayed switch-off, pressure gauge, coarse dirt filter, pressure regulating valve, detergent injector, operating pressure 30–160 bar, water flow rate approx. 180–1200 l/h, maximum water temperature 40 °C, output approx. 7 kW, voltage 3x 400 V, hose length 10 m, cord length approx. 5 m, dimensions approx. 765 x 530 x 1100 mm, weight approx. 77 kg Auction-ID: A1-40134-296

Conver C430H Mower boat - serial number 175 - Year of construction 2001 - Weight 1800kg Equipped with cutting bar 140cm wide with serrated knives Mitsubishi S4L engine Stove Servo operated Cruise control Trailer equipped with radio remote control for the winch Casco working width 1500cm - racks foldable 2x 50cm - total working width 250cm Auger height adjustable (hydraulically driven) Auction-ID: A1-40134-194

Equipped with: type: 1200, year of construction: 1993, working height: approx. 12.20 meters, max. lateral reach: approx. 4.50 meters, max. Basket load: 215 kg (suitable for 2 people + tools), Own weight: approx. 1,120 kg, Dimensions work basket: 1.10 x 0.65 meters, Drive: electric 220V, equipped with 4 mechanically extendable outrigger legs for quick and safe setup, 7-pin plug, no license plate, outrigger plates. Auction-ID: A1-40134-182

General SKU200W006 MakeHPV TypeRV Base SO No.2002-M-1 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm MaterialStainless steel 1.4404 (316L) Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Information With switchgearcheck (as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO. with: IKA, type Dispax-reactor DR2000/5-ATEX, year 2013, motor 7,5kw, 400V, EX. Nirosta vertical ...

Bucket 1400x1000mm. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-135

High-speed textile braiding machine for lace making, model KY-T12-NCF, Kyang Yhe brand. Configuration of 12 spindles, suitable for the production of round and flat cords. Compatible with materials such as polyester, nylon, cotton, elastic yarn and PP. Typical applications: round cords, flat cords, elastic cords (e.g. for face masks) and decorative elements. Power supply: 380 VAC, 50 Hz, industrial three-phase system. Equipped with individual speed controllers and digital production counter. Serial number: 30010/3. Year of manufacture: 2021. Auction-ID: A7-44783-1

Product Categories: Material Dispenser, Including: 1 x Film Holder: 173cm long. Auction-ID: A1-45762-22

High-speed textile braiding machine for lace making, model KY-T12-NCF, Kyang Yhe brand. Configuration of 12 spindles, suitable for the production of round and flat cords. Compatible with materials such as polyester, nylon, cotton, elastic yarn and PP. Typical applications: round cords, flat cords, elastic cords (e.g. for face masks) and decorative elements. Power supply: 380 VAC, 50 Hz, industrial three-phase system. Equipped with individual speed controllers and digital production counter. Serial number: 30010/3. Year of manufacture: 2021. Auction-ID: A7-44783-2

Cutting length: 78 cm, Touchscreen color display, Light barrier, Air table, Replacement blade, Documentation, Year of construction: 2005, Cutting width: 78 cm, cutting length: 78 cm

High-speed textile braiding machine for lace making, model KY-T12-NCF, Kyang Yhe brand. Configuration of 12 spindles, suitable for the production of round and flat cords. Compatible with materials such as polyester, nylon, cotton, elastic yarn and PP. Typical applications: round cords, flat cords, elastic cords (e.g. for face masks) and decorative elements. Power supply: 380 VAC, 50 Hz, industrial three-phase system. Equipped with individual speed controllers and digital production counter. Serial number: 30010/3. Year of manufacture: 2021. Auction-ID: A7-44783-3

A used cutting machine Polar 78XT Touch screen Side Tables Chrome-plated table Air table

High-speed textile braiding machine for lace making, model KY-T12-NCF, Kyang Yhe brand. Configuration of 12 spindles, suitable for the production of round and flat cords. Compatible with materials such as polyester, nylon, cotton, elastic yarn and PP. Typical applications: round cords, flat cords, elastic cords (e.g. for face masks) and decorative elements. Power supply: 380 VAC, 50 Hz, industrial three-phase system. Equipped with individual speed controllers and digital production counter. Serial number: 30010/3. Year of manufacture: 2021. Auction-ID: A7-44783-5

Gasoline, 3400 PSI. 10 L min, 8 m hose. Overall dimensions 600x450x550 mm Auction-ID: A7-44864-14

High-speed textile braiding machine for lace making, model KY-T12-NCF, Kyang Yhe brand. Configuration of 12 spindles, suitable for the production of round and flat cords. Compatible with materials such as polyester, nylon, cotton, elastic yarn and PP. Typical applications: round cords, flat cords, elastic cords (e.g. for face masks) and decorative elements. Power supply: 380 VAC, 50 Hz, industrial three-phase system. Equipped with individual speed controllers and digital production counter. Serial number: 30010/3. Year of manufacture: 2021. Auction-ID: A7-44783-4

Offer 26030 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Tapping device - Drilling spindle holder MK 3 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable - Stage 1. 65 - 240 rpm - Stage 2. 130 - 480 rpm - Stage 3. 240 - 875 rpm - Stage 4. 800 - 1750 rpm - 3 feeds 0.1; 0,2; 0.3 mm/rev - Projection 290 mm - Max. distance table - drilling spindle 520 mm - Turning table with 2 T-slots 450 x 450 mm - Height adjustable via rack with hand crank - Machine vice below the turning table - Emergency Off Button - Lighting - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 660 x H 1900 x D 700 mm - Weight approx. 280 kg

Offer 26119 Technical data: - Drilling performance in steel ST 60 30 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 125 mm - Drilling spindle speeds infinitely variable 80 - 3200 rpm - Tapping option by reverse / counterclockwise rotation up to M 20 - Projection 260 mm - Max. distance table - drilling spindle 825 mm - Table with 2 T-slots 500 x 360 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.8 / 1.5 kW - Space requirement approx. W 500 x H 1900 x D 950 mm - Weight approx. 230 kg - Cross table with handwheels

Temperature range max.: 140 °C; capacity: 900 l/hr; power: 7.3 kW; connection: 400 V; own weight: 128 kg; overall size L: 1150 mm; overall size W: 620 mm; overall size H: 850 mm; description: unused in wooden box; 4460; Auction-ID: A1-45773-507

Incl. KEYENCE SR-HL1 bracket Auction-ID: A1-45682-46

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-45773-524

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-45773-525

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-45773-523

Temperature range max.: 140 °C; capacity: 900 l/hr; power: 7.3 kW; connection: 400 V; own weight: 128 kg; overall size L: 1150 mm; overall size W: 620 mm; overall size H: 850 mm; description: unused in wooden box; 4460; Auction-ID: A1-45773-18

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-45773-526

Incl. KEYENCE SR-HL1 bracket Auction-ID: A1-45682-45

Key data: 1200 mm, 1000 mm, 500 mm

Röders 3-Axis High-Speed Machining Center High-Dynamics Vertical Machining Center Engineered for optimal accuracy and continuous precision, this 2012 Röders RXU 1200 provides exceptional 3-axis CNC performance for advanced manufacturing and toolmaking. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RXU 1200 Machine number: 13761-12 Year of manufacture: 2012 2. Operational parameters Travel (X / Y / Z): 1200 mm / 1000 mm / 500 mm Clearance height: 600 mm Machining feed rate: 0 - 60,000 mm/min Table size: 1300 x 1100 mm Max. workpiece weight: 3000 kg Axis drives: Linear motors in all axes Spindle: GMN HCS170; 40.4 kW; 100 - 30,000 rpm Tool holder: HSK-F63 Tool magazine: 56 positions Max. tool diameter: 35 mm (HSK-F63) Operating hours: approx. 16,951 h Spi ...

Key data: 300 mm, 1130 mm, 300 mm

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

Key data: 300 mm, 1130 mm, 300 mm

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

Key data: 1200 mm, 1050 mm, 500 mm

Röders 3-Axis High-Speed Machining Center High-Dynamics Vertical Machining Center This 2013 Röders RXU 1200 is a top-tier 3-axis high-speed machining center engineered for maximum rigidity and flawless surface quality in complex milling operations. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RXU 1200 Machine number: 13761-12 Year of manufacture: 2012 2. Operational parameters Travel (X / Y / Z): 1200 mm / 1000 mm / 500 mm Clearance height: 600 mm Machining feed rate: 0 - 60,000 mm/min Table size: 1300 x 1100 mm Max. workpiece weight: 3000 kg Axis drives: Linear motors in all axes Spindle: GMN HCS170; 40.4 kW; 100 - 30,000 rpm Tool holder: HSK-F63 Tool magazine: 56 positions Max. tool diameter: 35 mm (HSK-F63) Operating hours: approx. 16,951 h Spindle ...

Key data: 1000 mm, 810 mm, 500 mm

Röders 3-Axis High-Speed Machining Center High-Dynamics Vertical Machining Center Featuring state-of-the-art drive technology, this 2018 Röders RXU 1001 delivers high dynamic performance and exceptional precision for demanding 3-axis machining applications. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RXU 1001 Machine number: 15355-14 Year of manufacture: 2018 2. Operational parameters Travel (X / Y / Z): 1000 mm / 810 mm / 500 mm Clearance height: 700 mm Machining feed rate: 0 - 60,000 mm/min Table size: 996 x 796 mm Max. workpiece weight: 2000 kg Axis drives: Linear motors in all axes Spindle: 40.4 kW; 100 - 30,000 rpm Tool holder: HSK-F63 Tool magazine: 40 positions Max. tool diameter: 30 mm Operating hours: approx. 56,106 h Spindle hours: approx. 27 ...

Used Homogeniser High Pressure Tetra Pak 10000 lhr Main technical features of the Tetra Pak Homogeniser Alex TA25 Tetra Pak manufactured the TA25/200BAR model in 1995 as a used high-pressure homogeniser, designed to process up to 10,000 liters per hour at a pressure of 200 bar. Currently, the machine operates at a capacity of 10,000 liters per hour, while maintaining a maximum pressure of 200 bar. In addition, the machine includes two homogenization stages, which are perfect for precise particle size reduction. Components and operation The Tetra Pak TA25/200BAR uses mushroom valve cylinders, which therefore ensure efficient control of liquid flow. The pistons have a diameter of 50 mm, which consequently allows the machine to evenly distribute pressure across the two stages. Moreover, a 37 kW motor powers the unit, with an input of 400 V, drawing 68 Amps, running at 50 Hz and 1480 rpm. Di ...

Key data: 500 mm, 400 mm, 240 mm

Röders 3-Axis High-Speed Machining Center Compact 3-Axis High-Speed Milling Machine This 2006 Röders RXP 500 is a dedicated 3-axis high-speed machining center, highly regarded in the industry for micro-machining and delivering impeccable surface finishes. Technical Details ‍ 1. Machine identification data Name: CNC High-Speed Milling Machine Manufacturer: Röders Model: RXP 500 Machine number: 11714-65 Year of manufacture: 2006 2. Operational parameters Travel (X / Y / Z): 500 / 400 / 240 mm Table size: 550 x 450 mm (T-slots: 14 mm, spacing 63 mm) Max. workpiece weight: 400 kg Axis drives: Linear motors in all axes Feed rate: 0 – 40,000 mm/min Spindle: 14 kW; 42,000 rpm Tool holder: HSK E40 Tool magazine: 21 positions (optional up to 42 positions) Max. tool diameter: 16 mm Connections (Electrical): 400 V 3-phase (390V - 410V) ...

Key data: 600 mm, 450 mm, 300 mm

Röders 3-Axis High-Speed Machining Center 3-Axis High-Speed CNC Machining Center A proven performer in industrial milling, this 1999 Röders RFM 600/2 delivers reliable 3-axis high-speed cutting designed for precision tooling and mold making. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RFM 600/2 Year of manufacture: 1999 Machine number: 88194-80 2. Operational parameters Travel (X / Y / Z): 600 / 450 / 300 mm Table size: 700 x 550 mm Max. table load: 800 kg Spindle speed: 42,000 rpm Spindle motor power: 14 kW Feed rate: 0 – 30,000 mm/min Rapid traverse: 30 m/min Tool changer: 18-position Operating hours: approx. 108,888 h Spindle hours: approx. 18,625 h Control: Röders RMS6 Connections (Electrical): 400 V; 20 kVA 3. Weights Total machine weight: approx. 52 ...

High performance 8 bar steam machine, ideal for industrial cleaning, auto, professional kitchen... Stainless steel boiler, water + detergent tanks, superheated injection, automatic refilling. Very good condition. Reliable and powerful pro hardware. Steam production: up to 388 g/min Outlet temperature: 180°C 3m steam hose Served as good as new for a year Auction-ID: A1-45489-84

In stock on pallet, total dimensions approx. 1200x800x540 mm Auction-ID: A1-45790-595

A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3525

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug for batteries with 150-400Ah possible Delivery by freight forwarder possible on request. Auction-ID: A1-45450-2430

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3468

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, without Rema plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-2450

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug for batteries with 300-800Ah possible Delivery by freight forwarder possible on request. Auction-ID: A1-45450-4851

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug officially for batteries with 300-500Ah, but works up to 800Ah Delivery by freight forwarder possible on request. Auction-ID: A1-45450-4850

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3524

bore capacity in steel (diameter):45 mm WORKING RANGE -BORING-:. - drilling capacity full bore (steel):45 mm - drilling capacity full bore (cast iron):55 mm - horizontal travel:1050 mm - vertical travel:450 mm - sleeve stroke:200 mm WORKING SPINDLE / HEAD:. - spindle revolutions (min):15 /min - spindle revolutions (max):2800 /min - number of gears:2 - taper fixture : MK 4 :. - spindle power (continuous):5.5 kW - torque (max.):250 Nm - max. distance spindle ... clamping surface:710 mm - thread cutting attachment : yes :. TABLE:. - clamping surface (left-right):1200 mm - clamping surface (front-back):750 mm ELECTRICAL SPECIFICATIONS:. - total power consumption:7 kW - mains power supply:9.3 kVA - mains voltage:400 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - space requirements length:3000 mm - space requirements width:3000 mm - total height:3000 mm - total weigh ...

Manufacturer: SOTOS VOJUS (VOJUS a.s.) Year: 2001 Type: CNC lathe with automatic cycle Numerical control: Siemens Sinumerik 840D ShopTurn Max. turning diameter: Ø 630 mm Diameter above dragger: Ø 420 mm Max. turning length: 3,000 mm Spindle: up to 2,500 rpm – passage Ø 110 mm Fast feeds: longitudinal 10 m/min – transverse 5 m/min Installed power: approx. 26 kW Equipment: Multifix tool holder, 1 bezel, coolant Dimensions (mm): 3000 × 1800 × 1790 Weight (kg): approx. 4500 Remarks: High-capacity CNC lathe for long workpieces. Serial number included in the description.

Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton

Handtmann high vacuum filling machine, type: HVF 660 S, serial number: 29385, year of construction: 2011, 400 V, 3 Ph, 50 Hz, 34.6 A, 24 kW, with 2 Busch vacuum pumps, type: RA 0100 F 503 and KC 0040 D IZ0, capacity: 100 m³/h and 40 m³/h, total dimensions: 1700 mm x 1700 mm x 2380 mm.

T65 Digital Ultra Turrax Currency: MYR PIC: - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my