127,825 used machines on RESALE, but how to find them? Machine Search
Polar 92X High speed cutter Year 2004 Program Large side tables Spare knife Photocells
A total of 10 deionization devices Keyence are available. Ion generation: +/-7000V, ion balance: +/-30V, max. effective range: approx. 3000mm, working distance range: 50mm-2000mm, electrode material: tungsten, applications: plastics/films/coating/electronics/packaging. Documentation available. An on-site inspection is possible.
Used machine, Woma / Kärcher Ecotherm, hot water Working pressure: 500 bar flow 27 lpm, Year of construction 2009 Drive: Diesel 36.5 kW, Kubota V 2403 Diesel Operating hours: approx.: 645 h,
Klaaßen SDM15-5 turning machining centre, The top lathe we offer has the following in the basic configuration Technical parameters: ▪ SDM 4-5 CNC 4-Panel Bed Precision Lathe - Z-travel (slide longitudinal)= 5,000 mm (6,000 with TAE3) X-travel (face slide transverse)= 1,000 mm Y-axis (vertical movement)= 350 mm Maximum workpiece Ø = 1,500 mm Circulation diameter over face slide = 1,500 mm - Center width = 4,500 mm (5,500 with TAE3) ▪ CNC machine designed as a 4-lane tip lathe with full drive-over of the Bezels and superstructures - - - Cross slides and face slides restrict the diameter range by lateral arrangement on the lathe bed. As a result, there is no accompanying Diameter restriction above the face slide/tool carrier. Cross slide unit can be fully attached to the steady rests, HSSL and tailstock. This significantly reduces the set-u ...
Press capacity: 63 ton Ram stroke adjustable: 8 - 60 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 810 x 550 mm Slide area: 700 x 420 mm Hole in table: 550 x 140 mm Distance between oil tray: 700 mm Table height over floor: 920 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 8 ton Dimensions L x W x H: 2935 x 1170 x 3000 mm Main Motor: 11 kW
threading: 30 M bore capacity in steel (diameter): 40,0 mm workpiece height max.: 380 - 785 mm arm length: 985 mm spindle taper: 4 MK boring head swiweling right/left: -80 / +80 Grad turning speeds: 50 - 2000 U/min table surface area: 1210 x 520 mm column diameter: 220 mm column diameter: 220 mm table surface area: 1.210 x 520 mm quill stroke: 200 mm feed range - spindle: 0,08 - 0,5 mm/U total power requirement: 2,2 kW weight of the machine ca.: 2.800 kg. dimensions of the machine ca.: 2,45 x 1,2 x 2,72 m characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in ...
MÜGA high-speed drilling-milling centre TYPE: S 3030 with 2-fold pallet changer incl. chip conveyor (similar to FANUC or BROTHER) Control: MITSUBISHI M70 Travel: X/Y/Z: 300 x 250 x 250 mm Spindle speed: 60 – 10,000 rpm. Motor power: 100//30% ED 2.2/3.7 kW Star turret: 12-speed Tool change time: 1.6 sec. Chip-to-chip time: 2.5 sec. Tool holder: BT 30 - 45° 2-fold pallet table: LxW: 400 x 250 mm Chip conveyor ejecting backwards Rapid traverse: X/Y/Z: 48/48/60 m/min. Installation area: L x W x H: 2690 x 1570 x 2370 mm Weight: 3300 kg Total connected load: 11.5 kW Description: The machine is suitable due to the 2-fold pallet system, as well as the high rapid traverses and fast chip-to-chip time for series part production. From 2011 to 2020, it was used in single-shift operation exclusively for ALU machining. There is no hour meter. The machine is still un ...
GUK FA 21/4 S2 SVA/730 stand-alone leaflet folding machine, 4 folding pockets, sheet format unfolded: min. 60 x 90 mm, max. 215 x 320 mm, smallest folding 15 mm, recommended paper weight 50-70 g/m², automatic drum suction feeder SVA/730, PCE barcode reader, double sheet control, output up to 460 folds/min., infinitely variable drive, electrical connection 400V/3Ph/50Hz, rated power consumption 1.76 kW, machine footprint approx. 1650 x 1075 mm (LxW), machine height approx. 1470 mm, machine net weight approx. 300 kg, machine in mobile version on wheels
The scope of delivery includes: 01x Rear wall grille, used Material colour: yellow Overall width: approx. 2,740 mm Total height: approx. 1,100 mm Mesh size: approx. 50 x 50 mm Frame profile size: approx. 40 x 40 x 4 mm Wire thickness: approx. 3.0 mm Weight | Pcs.: approx. 26.84 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Manufacturing year : 1992/93 BAR: 1500 KW: 450 RPM: 305 l/min: 150
used
ROBOTS FOR HIGH PRESURE DEMOLITION PUMPS IN GREAT CONDITION. ROBOT CONJET 363, 322 , AND JETFRAME SYSTEMS 102
Mazzoni high-performance guillotine type cutter with its own conveyor Dimensions: Mouth width 550 mm Conveyor width 1000 mm Conveyor belt width 600 mm Total length 3000 mm
Offer 25380 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Threading in steel ST 60 to M 42 - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 40 – 1100 rpm - Right - Counterclockwise rotation - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 350 mm - Max distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 630 x 540 mm Height adjustable via rack with hand crank - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 600 x H 2050 x D 980 mm - Weight approx. 650 kg - with: - Tapping device - Keyless chuck 1-13 mm - Emergency stop button -Lighting - Coolant device
NEW, 470 kg, capacity: 1.20 m³, width: 240 cm - also available in other widths from 120 cm - 250 cm, with JCB Q fit or JCB 520-50 mount or with various other mounts
NEW, 470 kg, capacity: 1.20 m³, width: 240 cm - also available in other widths from 120 cm - 250 cm, with JCB Q fit or JCB 520-50 mount or with various other mounts
NEW, width 200 cm, 396 kg net weight, 0.98 m³ capacity, with Komatsu mount
NEW, 300 cm width, with approx. 4 m³ capacity, dead weight 1600 kg, with Hardox scraper bar, with CAT 908 attachment,
Offer 25319 Specifications: - Drilling capacity in steel ST 60 35 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Drilling spindle speeds 65 - 3250 rpm - 3 feeds 0.1 / 0.2 / 0.3 mm/rev - Projection 320 mm - Max. distance table - drilling spindle 560 mm - Table with 2 T-slots 500 x 420 mm - Height adjustable via rack with hand crank - Table left + right tiltable - Drive 400 V / 1.5 kW - Space requirement approx. W 550 x H 2200 x D 900 mm - Weight approx. 550 kg - with: - Right – Counterclockwise - Coolant device -Lighting
Air Pressure: 40 bar // Delivery Rate: 1630 m³/h
Air Pressure: 40 bar // Delivery Rate: 950 m³/h
Dynajet 1000 me, used, blue Operating pressure: 1000 bar, Flow rate: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Operating hours: approx.: 427 h, Trolly, incl. gun, 10 m HD hose, 15° flat spray nozzle,
General SKU200W001 LocationBarneveld MakeHPV TypeDish LPD liquid processing unit No.1200-0708/2008 Year of construction2008 Main Features MaterialStainless steel Motor5.5 KW Specified Features - Inline mixer Capacity18,0 t/h of final product MaterialStainless steel 1.4435 (316L) Information Total height2,6 m Weight3500 kg CEcheck Floorspace6,4x2,35 m Extra Specificationsperfume, aroma, mixing skid The LLPD mixing machine is designed for continuous mixing of the final product and its accumulation for subsequent pumping into final packaging. The machine is capable of producing various modifications of the final product (FP) in 10 perfume variants and different color spectra available within the capacity ranges of dye dosing systems. Qualified reblend (RB) can be added to FP during normal production within the dosing capacity range. The LLPD mixing machine consists of: ...
General SKU251M192 LocationBarneveld MakeFluko - Fluid Kotthoff GmbH Essen TypeDMS 3,2/25-20 No.14078-02 Year of construction2005 Main Features MaterialStainless steel Motor11 KW Rotor150 mm Specified Features - Inline mixer MaterialStainless steel 1.4571 (316Ti) Continuous reactorIn-line dispersing machine (1x) Rotor sizesdia. 150mm Inletdia. 50mm Outletdia. 50mm Motor11,0 KW, 400/690 Volt Rotor speed2930 Rpm Information Floorspace1,1x0,5 M Total height0,7 M Weight240 KGInline high shear mixersFlukoMixers > Inline high shear mixersBrand > Fluko What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU212X066 LocationBarneveld MakeArde - Barinco TypeD6000 No.2182 Year of construction2001 Main Features MaterialStainless steel Motor3 KW Rotor90 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 90 mm InletDN200 Number of stages:1 Capacityapprox 20-285 ltr/min Motor3 kW, 400 volt, 1800 rpm With variable speed drivecheck With frequency controllercheck With vesselHopper Vessel sizes600x800x600 mm MaterialStainless steel 1.4401 (316) Information Mounted on framecheck Mounted on wheelscheck Total height2,10 m Weight380 kg With switchgearcheck Floorspace1,40x0,90 m Extra SpecificationsWith vibro motor, 0,35 kW, 220-240/380-415 volt, 1500 rpm. infeed screw conveyor, screw dia. 125 mm, : diaphragma pump Inline high shear mixersArde-BarincoMixers > Inline high shear mixersBrand > Arde-Barinco What you can expect from Foeth: -- ...
Keyence HIGH-ACCURACY CCD MICROMETER LS-7001 + LS-7030T / LS-7030R. More items - new and used - can be found in our shop! International shipping costs on request! H2R7A15K35-PD
Conventional precision lathe WEILER "CONDOR VC" With 3 axis digital display Siemens Year of Make: 2012 Spindle bore: 56 mm Center width: 800 mm Circumference Ø over bed : 205 mm Speed range: 30 – 3500 rpm With the following accessories: Multifix Tool Holder Chip backsplash wall with interior lighting Coolant Setup 3 jaw chuck 0 200 mm Feed protection Moving Lynette 0 approx. 150 mm Tailstock with extendable drill quill Operating instructions
Offer 25490 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Digital speed display - Projection 300 mm - Turning table with vice 440 x 440 mm - Column diameter 145 mm - Feeds-Electromagnetic 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Drilling spindle speeds infinitely adjustable with digital display - 200 - 3200 rpm - Drive 400 V / 1.8 / 2.9 kW -Lighting - E. footswitch - Space requirement approx. W 650 x H 1900 x D 800 mm - Weight approx. 470 kg
Key data: 4350 mm, 1250 mm, 1200 mm
FIDIA K 211 – 5-axle CNC machining center for complex shapes in tool and mold making. Equipped with a simultaneous 5-axis twist milling head (A-Y-C) The FIDIA C20 CNC control system ensures fast data processing, precise path guidance and reliable process control. With a spindle speed of up to 24,000 rpm, the machine is optimally designed for high-speed milling and fine surface quality.
Key data: 2650 mm, 1250 mm, 1200 mm
FIDIA K 211 – 5-axle CNC machining center for complex shapes in tool and mold making. Equipped with a simultaneous 5-axis twist milling head (A-Y-C) The FIDIA C20 CNC control system ensures fast data processing, precise path guidance and reliable process control. With a spindle speed of up to 24,000 rpm, the machine is optimally designed for high-speed milling and fine surface quality.
A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible.
CHIRON FZ08 KS Magnum High Speed Plus (HSP) High-Speed Machining Center (HSP) TECHNICAL FEATURES: Year: 2006 NC Type: FANUC 18i-MB5 Number of axes: 7 X-axis travel: 450 [mm] Y-axis travel: 270 [mm] Z-axis travel: 310 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] Maximum speed Turning spindle: 8000 [rpm] Maximum power turning spindle: 12 [kW] A-axis angular travel: 360 [°] A-axis indexing accuracy: 0.001 [°] B-axis angular travel: -20° / +115 [°] B-axis indexing accuracy: 0.001 [°] Pin Attachment: HSK40 Maximum speed Spindle: 30000 [rpm] Number of tool magazine stations: 40 Turning part by robot (6th side machining): Yes RS232 Port: Yes Installed power: 17 [kVA] Supply voltage: 400 [V] Operating hours: 9911 [h] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW p ...
SEGATRICE AUTOMATICA a Doppia Colonna SHARK 350 NC HS 5.0 + Evacuatore Motorizzato a Paletta Segatrice a nastro automatica, a doppio montante, per eseguire tagli a 0° su acciai da costruzione, inox e legati, pieni e profilati, con dimensioni comprese in 350x350 mm. Di serie completa di: Evacuatore di trucioli motorizzato dragante, applicabile a destra o a sinistra della macchina. Regolazione della pressione delle morse. Alimentatore con rulli verticali per il contenimento delle barre. Macchina a controllo numerico CNC MEP 50-Windows CE” Based, progettato da MEP per l’automazione delle macchine di propria produzione. Ciclo di taglio taglio pulito” - L’alimentatore arretra la barra per evitare delle rigature sulla superficie tagliata quando il nastro torna in alto. Sistema di controllo a bus di campo con doppio microprocessore con collegamento seriale. Interfaccia uten ...
High-Pressure Waterjet Trailer, wp 2,800 bar / 28 lpm YoM 2023 For sale is a very well maintained high-pressure waterjet trailer unit with extremely low operating hours. The machine is in excellent technical and visual condition and ready for immediate use. Powered by a Volvo diesel engine (160 kW), the unit delivers 2,800 bar at 28 lpm, making it ideal for demanding industrial and waterjet cleaning applications. With only approx. 185 operating hours, the unit is close to new. The trailer comes including accessories and is fully operational – no additional investment required. Inspection and test run possible.
General SKU292X391 LocationBarneveld CEcheck MakeNetzsch TypePSI Mix Main Features MaterialStainless steel Volume15000 Ltr. Motor45 KW Specified Features - Inline mixer MaterialStainless steel 1.4829, Stainless steel 1.4301 (304) Inline high shear mixers Mixercheck CapacityUp to 5 m³/h Information No.2401393 Year of construction2005 Floor space1,90x1,60 m Total height2,20 m Weight2500 kg ATEX compatiblecheck Extra SpecificationsWith rotation valve, 29 rpm, Bartec control, type BAT 300, (Ex), : Burgmann refill unit, type spn2063, in and output: DN80 control cabinet (as is) Inline high shear mixersNetzschMixers > Inline high shear mixersBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...
High pressure compressor LMF 40 bar Type: Eco Pet VD 1350 - B Year of manufacturing: 2003 Capacity: 1.350 m³/h Maximan pressure: 42 bar Electric power: 243 kW Working hours: approx. 35.800 h with Siemens S7 PLC and Danfoss frequency drive incl. pressure air buffer tank, 900 ltr. incl. air dryer incl. chiller / cooling tower the machine is dismantled and on stock in Germany
Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks:, What is a Temperature-Controlled Processing Tank?, A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle., Key Features, - Heating and Cooling Systems:, - Heaters: Can be electric or steam-based to raise the temperature of the contents., - Chillers: Usually water or glycol-based cooling systems to lower the temperature., - Insulation: ...
High-pressure pump in the container with ES 2 control – immediately ready for use For sale is a powerful high-pressure pump in a container, equipped with ES 2 control. The system is technically tested and 100% ready for use. Technical data: Machine number: A8.01174.xxxx WP 2250 / 2500 bar Flow 38 /34 lpm Registration date: 10/2008 Total operating hours: 11,960 h Drive: Caterpillar C7 engine Power: 186 kW Engine completely renewed at 10,350 operating hours High Pressure Pump: Sleeves and pistons operating hours: 2,870 h Condition & Notes: Used, technically flawless Regularly serviced Ready to use Ideal for industrial high-pressure and cleaning applications Financing: Financing possible (by arrangement)
WOMA 325 Z P30 high-pressure system – 1000 bar – replacement engine Scania – ready for use For sale is a WOMA 325 Z P30 high-pressure plunger pump, installed in a MAN vehicle. The system is 100% operational, technically and visually very well maintained. The machine is equipped with a Scania DS11 replacement engine (see nameplate). Robust, proven technology – ideal for demanding industrial cleaning jobs. Technical data: Pump manufacturer: WOMA Type: 325 Z P30 Max. operating pressure: 1,010 bar Flow rate: 134 l/min Speed: 1,800 rpm Plunger Ø: 30 mm Power consumption: approx. 230 kW Drive: Scania Replacement Engine (DS11) Installation: MAN vehicle Operating hours: approx. 13,649 h Condition: Fully functional very neat overall condition Ready to use No known defects The facility is ideal for: industrial high-pressure cle ...
High-precision lathe DMG Mori Wasino G 100/480 Year of Make: 2017 Control: Fanuc COMPACT line Temperature response (cold start): ø 2.0 μm Roundness: 0.5 μm Technical data: Spindle speed: Drive power: Turning diameter: 285mm Turning length: 280mm Bar Passage: 38mm Travels: X-axis: 480mm Z-axis: 285mm Accessories - 3 pcs of powered tools - Package rigid tool holders - Fire extinguishing system - machine only ran under oil - Chip conveyors
Lift system, Megamat, 170kg / shelf, approx. 6m high, – used - : Ex-site price: 14.500.- € (net), plus dismantling etc. Manufacturer: Megamat Type: Megalift 14448/25/6010 Year of Make: 2000 Max. load capacity per shelf: 170kg Max. total load capacity 18,000kg Dimensions per shelf: approx. 2.45m x approx. 0.80m Number of shelves: approx. 40 pieces Device dimensions: Height: approx. 6.01cm Width: 2.76m Depth: approx. 2.70m 3/N/PE 230/400V 10A, Fuse 16A Condition: good Available: immediately Location: BG-8800 Sliven
Equipment for washing industrial tanks under high pressure. KONGSBERG OFFSHORE, LARGE UMBILICAL REEL 37 LINE, serial number 01.
Offer 25032 Technical data: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 65 mm - Tapping device up to M 60 - Drilling spindle holder MK 5 - Drilling spindle stroke 240 mm - Projection 400 mm - Table with 2 T-slots 720 x 560 mm - max distance table – drilling spindle approx. 850 mm - 4 feeds 0.1 - 0.2 - 0.3 - 0.4 mm/rev - AZ continuously variable transmission with manual transmission - Drilling spindle speeds infinitely adjustable 40 - 1600 rpm - Drive 400 V / 5.5 kW - Space requirement approx. W 850 x H 2480 x D 1350 mm - Weight approx. 1450 kg
General SKU288X384 MakeIka Werke TypeMHD 2000/05-ATEX No.200023306 Year of construction2020 Mounted on framecheck Main Features MaterialStainless steel Motor7.5 KW Rotor60 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 60x150 mm InletDN50 OutletDN32 Number of stages:2 Capacity700 l/h Motor7,5 kW, 400/690 volt, 2910 rpm, (Ex) Rotor speed6000 rpm MaterialStainless steel 1.4306 (304L) Information LocationBarneveld Floorspace0,70x0,40 m Total height1,20 m CEcheck ATEX compatiblecheck Extra SpecificationsTotal cap. 700 l/h, solids cap. Max 500 l/h.Inline high shear mixersIKA WerkeMixers > Inline high shear mixersBrand > IKA Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...
General SKU376X935 MakeBecomix TypeDH-500 LocationBarneveld CEcheck Motor Motor power8 kiloWatt Main Features MaterialStainless steel Motor8 KW Inlet diameter50 mm Specified Features - Inline mixer Colloid millcheck Emulsifiercheck Rotor sizesDia 245 x 40 mm Teethed rotorcheck Without hoppercheck Inlet25 mm and 50 mm Outlet50 mm With mechanical sealcheck Motor8 kW (400 V, 2950 rpm) With variable speed drivecheck (freq controller) Speed2910 rpm. Inline high shear mixers MaterialStainless steel 1.4306 (304L) Information No.070/4-N0003 Year of construction2010 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,6 x 1 m Total height1 m Weight250 kg Extra Specificationsin-line colloid-millInline high shear mixersBecomixMixers > Inline high shear mixersBrand > Becomix What you can expect from Foeth: -- Machine is in working conditio ...
General SKU350W925 LocationBarneveld Pressure Working pressure3 Bar Main Features MaterialStainless steel Motor19 KW Rotor130 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 130 x 50 mm Inlet80 mm Outlet25 mm With mechanical sealcheck Motor16,5/19 kW, 400 volt, 1460/2930 rpm MaterialStainless steel Information MakeBecomix Year of constructionUnknown Mounted on framecheck Floorspace0,50 x 0,90 m Total height0,80 m Weight300 kg Extra Specifications- With input hose Inline high shear mixersBecomixMixers > Inline high shear mixersBrand > Becomix What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKUR0162 MakeAZO Liquids GmbH (D) LocationBarneveld TypeContinous Powder Mixing Main Features MaterialStainless steel Motor12 KW Specified Features - Inline mixer MaterialStainless steel Information No.111182-01 Year of construction2015 Floor space3,3x1,5 M Total height2,8 M Weight1900 Kg Extra SpecificationsIncluded 1 X Blender type PMXR material Stainless steel, motor 2,2 kW, with seal barrier system brand Aerni type AFR 168 ZS 8L max pressure 23 bar with liquid circulation pump 0,18 kW 1 x 520 ltr. tank brand Urban type wasserbehalter serial number 15.1606 pressureless, conical bottom, flat top. single-walled, uninsulated, on legs. 1 x Schenk Process powder funnel MechaTron type GRLS 27.070.000.0083 serial number V093547.A01 built in 2015 with a vibrating chute underneath. 1 x ITT Borneman screw spindle pump type SLH-4G-2033 working pressure 4 bar 5.5 kW. 1 x ...
General SKU251M191 LocationBarneveld MakeFluko - Fluid Kotthoff GmbH Essen TypeDMS 3,2/50-20 No.14078-01 Main Features MaterialStainless steel Motor45 KW Rotor150 mm Specified Features - Inline mixer Continuous reactorIn-line dispersing machine (1x) Rotor sizesdia. 150mm Inletdia. 80mm Outletdia. 80mm Motor45,0 KW, 400/690 Volt Rotor speed2960 Rpm MaterialStainless steel 1.4571 (316Ti) Information Year of construction2005 Floorspace1,4x0,8 M Total height0,8 M Weight500 KGInline high shear mixersFlukoMixers > Inline high shear mixersBrand > Fluko What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
maximum number of results exceeded
please refine your search
