high speed mixer used for sale

ATIKA concrete mixer, details n. known, nameplate n. legible

2-Shaft Mixer; with tilt function; Lining and kneading wings are made of stainless steel, 2-Z-shaped kneading blades; Length 2.90 m, width 1.30 m, height 2.10 m, trough size 64 x 69 x 55 mm Engine type ZG4 KMR 132 S4; Motor power: 7.5 kW; Motor voltage: 380/ 660 V; Rated speed motor: 1435 ... 1480 rpm; Output speed (gearbox): 160 rpm. The plant was shut down in 2024. more photos on request

Equipped with 2 vertical mixing augers; each mortar equipped with 7 knives; 3 dosing slides; weighing device; Auction-ID: A1-40135-236

Range of mixer taps + waste fittings Hansa, 18 mixer taps, cardboard box with connector + rosettes, waste fittings + plugs Auction-ID: A7-45960-32

Carnitech double shaft paddle mixer-grinder, type: 3224, number: 2391900, year of construction: 2004, 400 V, 3 Ph, plate diameter: 210 mm, total dimensions: 2700 mm x 2260 mm x 2200 mm. Including s/s trolley with knives and plates, dimensions: 1010 mm x 700 mm x 1000 mm.

Wolfking mixer-grinder, type: SFG 850/200, 22 kW, plate diameter: 200 mm, total dimensions: 1670 mm x 1600 mm x 2030 mm. Dimensions switch cabinet: 1200 mm x 100 mm x 450 mm. Including plates and knife.

Tumbler Henneken -Capacity: 2000L -Dimensions: 2400 x 1500 x 2100 mm -Busch vacuum pump -Made of stainless steel -Condition: Used in very good condition, overhauled, ready to work

ID3780 STS Scheltzke MS2-700 E-A-AUT year/Baujahr 2021 approx. 900 hours/hours Fully automatic mixing station, continuous twin-batch mixing plant, total batch capacity (mixers 1+2): 36 m³/h, total power consumption: approx. 30 kW Fully automatic mixing station, continuous double-batch mixing plant, total batch output (mixer 1+2): 36 cbm/h, total power consumption: approx. 30 KW

Nowicki Vakuum tumbler -Typ: MA-G-5400 -Kapazität: 5400 l -Max. Beladung: 2700 kg -Mit Kühlung -Antriebsleistung: 8,2 kW -Gewicht: 2900 kg -Abmessungen: 4150 x 1900 x 2350 mm -Stromversorgung: 3 x 400 V -Aus Edelstahl -Einsatz mit Band- oder mechanischer Beladung -Verfügbar: 2 Stück -Zustand: Gebraucht, sehr gut, generalüberholt, sofort einsatzbereit

Tumbler Lutetia -Type: 1 -Power: 4 kW -Capacity: 950 L -With documentation -Weight: 800 kg -Working capacity: approx. 400 kg -Power supply: 400V 50Hz 3Ph -Made of stainless steel -Drum diameter: 970 mm -Dimensions: 2180 x 1200 x 1820 mm -Condition: Used in very good condition, overhauled, ready to work

Equipped with: feed mixer RX 9.15 M – 12 m³, tyre size 445/65R22.5, year of construction 2012, CE marking, year of construction: 2012, tank capacity: approx. 15 m³, own weight: approx. 5,300 kg, gross permissible weight (GVW): approx. 10,800 kg, axle load: 12,000 kg, support load: 2,200 kg, PTO speed: 540 rpm, hydraulic pressure: 150 bar, single axle, hydraulic support leg, weighing device, hydraulic discharge conveyor front, serrated cutting blades on auger, front left discharge, Double vertical mixing augers, hydraulically operated unloading conveyor / cross discharge, electronic weighing installation (display available). Auction-ID: A1-40136-183

Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data Capacity: approx. 15,000 L/h Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) Configuration: Multi-tank system (product tank, vacuum tank, saturator) Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) CO₂ content: approx. 6.5 – 7 g/l Electrical: 380 V, 3-phase Drive power: approx. 5.5 – 7.5 kW Scope of Delivery  Premix beverage mixer | Stork J ...

Intensive batch mixer with a usable filling per batch of 750 l. / 1,200 kg (max.), emptying via central bottom flap (hydraulically operated), tools: pin whirler and wall-to-floor scraper. Agitator drive: 45.0 kW via toothed belt, drum drive: 11.0 kW via sprocket, hydraulic unit: 2.2 kW for lock actuation. All parts in contact with the product are made of stainless steel, only 2,417 operating hours.

Additional title: in various designs

Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters., Additional title: Intermix system with carbonisation unit, Water output: 22575 l/h, Fruit juice output: 4907 l/h, Operation / Control: Control panel, manual, Material: Lacquered mild steel frame, stainless steel product contacts, Position: Free standing, Base construction: Open frame construction with spherical feet, Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Spiral mixer BOKU, type: SK 240 A There are 2 engines and 12 tank cars available - Kettle suitable for a maximum of 240 kg of dough - back from the bakery - Machines were in use until recently Visits and test runs are possible by arrangement.

Professional meat mixer model SN50M is designed for fast and uniform mixing of meat, spices and other ingredients in butcher shops, restaurants, processing plants and professional kitchens. This model is an ideal solution for users who require higher capacity, reliable operation and high mixing quality in daily professional use. The powerful 2200 W motor ensures efficient operation and stable performance even under heavier workloads. The working speed of 25 rpm provides even mixing and optimal preparation of products such as minced meat, sausages, cevap mixtures, burger mixes and other meat products. The construction is made of high-quality stainless steel, ensuring long service life, corrosion resistance, high hygiene standards and easy maintenance. Its robust design and stable structure make this model an excellent choice for daily professional work. Compact external dimensions allo ...