127,544 used machines on RESALE, but how to find them? Machine Search
Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton
Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW
Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton
Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5
: 40 1008 rated current: 20 A voltage: 24 V weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FOR SALE: BRUDERER BSTA 50USL High-Speed Stamping Press With Automatic Strip Feeder BBV 190 500 kN | 100–1120 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 500 kN Stroke rate: 100–1120 strokes per minute Working hours: 41000 h Main motor: 22 kW Control voltage: 24V DC Power connection: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 /44 / 51 mm Shut height adjustment: 64 mm Working Dimensions: Max tool installation width: 1100 mm Strip pass width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Strip entry height adjustable: 60–140 mm Max strip width: 120 mm Max feeding pitch: 85 mm Max material thickness: 4 mm Feeding angle: 180 Deg Machine Dimensions (with BBV 190): Machine footprint (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 1 ...
bore capacity in steel (diameter): 23 mm spindle taper: MK 2 spindle stroke: 130 mm arm length: ca. 860 mm table-size: 1280 x 500 mm surface area: ca. 1250 x 480 mm turning speed range: 115 - 2400 U/min workpiece height max.: ca. 535 mm boring chuck: Schnellspannfutter 1-13 weight of the machine ca.: 690 kg total power requirement: 1 kW range L-W-H: ca. 1300 x 1800 x 2100 mm Distance spindle center - stand center (projection): approx. 860 mm Distance table quill (workpiece height): max. 535 mm Adjustability of the horizontal/vertical arm: approx. 300 - 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible.
Quick-opening milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000speed max. 15000 rpm at 70% EDratio ratio 1:5Power transmission up to approx. 2.5 kWProduct dimension 110 mm (machine spindle to clamping nutTool holder MK4 with tightening thread M16Collets type OZ16 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mmWeight 6.5 kgGood condition; used
x-travel: 760 mm y-travel: 460 mm z-travel: 560 mm Control: Siemens Sinumerik 840D b-axis: NC-Schwenkfräskopf A-axis: NC-Rundachse milling-head swivable +/-: -120 / +30 Tool changer: 60 Cooling through the spindle: IKZ 40 bar spindle turning speed range: 12.000 U/min spindle motor: 28/19 kW tool taper: HSK-A 63 max. torque on the spindle: 121 pm total power requirement: ca. 60 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: - m Universal bar machining center - Siemens Sinumerik 840 D 3D path control - Powerline ShopMill - Controlled NC swivel milling head (B-axis) - NC rotary axis with integrated clamping system - NC bar loader - Slide/conveyor belt for parts disposal - Coolant tank 600 ltr. with paper belt filter - IKZ 40 bar through spindle center - Rotating viewing window - Tool breakage control - Chip conveyor - Tool magazine - Chain magazine with 60 magazine s ...
Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 78 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 930 x 590 mm Number of strokes: 620 - 1.120 s.p.m. Required power: 40 kW Dimensions L x W x H: 3.900 x 1.400 x 3.065 Weight of machine approx.: 9 ton
A total of 10 deionization devices Keyence are available. Ion generation: +/-7000V, ion balance: +/-30V, max. effective range: approx. 3000mm, working distance range: 50mm-2000mm, electrode material: tungsten, applications: plastics/films/coating/electronics/packaging. Documentation available. An on-site inspection is possible.
Press capacity: 63 ton Ram stroke adjustable: 8 - 60 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 810 x 550 mm Slide area: 700 x 420 mm Hole in table: 550 x 140 mm Distance between oil tray: 700 mm Table height over floor: 920 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 8 ton Dimensions L x W x H: 2935 x 1170 x 3000 mm Main Motor: 11 kW
threading: 30 M bore capacity in steel (diameter): 40,0 mm workpiece height max.: 380 - 785 mm arm length: 985 mm spindle taper: 4 MK boring head swiweling right/left: -80 / +80 Grad turning speeds: 50 - 2000 U/min table surface area: 1210 x 520 mm column diameter: 220 mm column diameter: 220 mm table surface area: 1.210 x 520 mm quill stroke: 200 mm feed range - spindle: 0,08 - 0,5 mm/U total power requirement: 2,2 kW weight of the machine ca.: 2.800 kg. dimensions of the machine ca.: 2,45 x 1,2 x 2,72 m characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in ...
x-travel: 600 mm y-travel: 450 mm z-travel: 300 mm CNC-control: Roeders RMS6 table-size: 700 x 550 mm max. table load: 800 kg spindle taper ISO: spindle turning speed range: 42.000 U/min feed stepless: 0 - 30.000 mm/min rapid traverse: 30 m/min drive capacity - spindle motor: 14 kW tool change unit: Pick-up 18 Pos. voltage: 400 V total power requirement: 20 kVA weight of the machine ca.: 5,2 t dimensions of the machine ca.: 3,00 x 2,30 x 2,70 m - Serial No.: 88231-83 - HSC spindle Fischer MFW1230/42 - Dust extraction system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MÜGA high-speed drilling-milling centre TYPE: S 3030 with 2-fold pallet changer incl. chip conveyor (similar to FANUC or BROTHER) Control: MITSUBISHI M70 Travel: X/Y/Z: 300 x 250 x 250 mm Spindle speed: 60 – 10,000 rpm. Motor power: 100//30% ED 2.2/3.7 kW Star turret: 12-speed Tool change time: 1.6 sec. Chip-to-chip time: 2.5 sec. Tool holder: BT 30 - 45° 2-fold pallet table: LxW: 400 x 250 mm Chip conveyor ejecting backwards Rapid traverse: X/Y/Z: 48/48/60 m/min. Installation area: L x W x H: 2690 x 1570 x 2370 mm Weight: 3300 kg Total connected load: 11.5 kW Description: The machine is suitable due to the 2-fold pallet system, as well as the high rapid traverses and fast chip-to-chip time for series part production. From 2011 to 2020, it was used in single-shift operation exclusively for ALU machining. There is no hour meter. The machine is still un ...
bore capacity in steel (diameter): 32 mm arm length: 950 mm turning speed range: 102 - 2000 U/min turning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mm feed range: 0,075 x 0,3 mm/min table surface area: 1200 x 510 mm total power requirement: 2 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 1,8 x 1,2 x 2,25 m Compact style with hydraulic fast-clamping, motorised height adjustment, feeder device and thread-cutting device. Integrated coolant container in machine frame. Main switch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CHIRON FZ08 KS Magnum High Speed Plus (HSP) High-Speed Machining Center (HSP) TECHNICAL FEATURES: Year: 2006 NC Type: FANUC 18i-MB5 Number of axes: 7 X-axis travel: 450 [mm] Y-axis travel: 270 [mm] Z-axis travel: 310 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] Maximum speed Turning spindle: 8000 [rpm] Maximum power turning spindle: 12 [kW] A-axis angular travel: 360 [°] A-axis indexing accuracy: 0.001 [°] B-axis angular travel: -20° / +115 [°] B-axis indexing accuracy: 0.001 [°] Pin Attachment: HSK40 Maximum speed Spindle: 30000 [rpm] Number of tool magazine stations: 40 Turning part by robot (6th side machining): Yes RS232 Port: Yes Installed power: 17 [kVA] Supply voltage: 400 [V] Operating hours: 9911 [h] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW p ...
bore capacity in steel (diameter): 32 mm arm length: 950 mm turning speed range: 51 - 1000 U/min turning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mm feed range: 0,075 x 0,3 mm/min table surface area: 1200 x 510 mm total power requirement: 2 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 1,8 x 1,2 x 2,25 m High-speed radial end mill with - Thread cutting attachment - Vertical table 750 x 620 mm - Horizontal table 1200 x 510 mm - Emergency stop device - Documentation Machine-No. 445 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, testing is possible by prior arrangement. X-axis travel distance:3,200 mm Y-axis travel:1,400 mm Z-axis travel:900 mm X-axis rapid traverse:16 m/min Y-axis rapid traverse:20 m/min Rapid traverse: m/min Y-axis feed rate:10 m/min Z-axis feed rate:10 m/min Nominal (apparent) power:50 kVA Controller manufacturer:Fanuc α 30/3000i 7.0 Workpiece length (max.):4,000 mm Workpiece width (max.): max. 000 kg Total height: 4,500 mm Total length: 8,130 mm Total width: 4,150 mm Table width: 1,200 mm Table length: 3,200 mm Table load: 8,000 kg Total weight: 17,000 kg Maximum spindle speed: 8,000 rpm Diameter: 50 mm Tool length: 350 mm Tool diameter: 127 mm Tool weight: 20 g Equipment: documentation / manual, chip conveyor, infinitely adjustable speed
The machine is in good technical condition, testing is possible by prior arrangement. X-axis travel distance:1,035 mm Y-axis travel:560 mm Z-axis travel:510 mm X-axis rapid traverse:30 m/min Y-axis rapid traverse:30 m/min Z-axis rapid traverse:30 m Y-axis feed length:560 mm Z-axis feed length:510 mm X-axis feed:30 m/min Y-axis feed speed:30 m/min Z-axis feed speed:30 m/min Rated (apparent) power:17 kVA Torque:83 Nm Controller manufacturer: Sie 137 mm Overall width:3,355 mm Table width:560 mm Table length:1,200 mm Table load:1,000 kg Overall weight:4,250 kg Spindle speed (min.):20 rpm Maximum spindle speed:8 000 rpm Tool operation:20 Tool length:300 mm Tool diameter:80 mm Tool weight:6,000 g Equipment:documentation / manual, chip conveyor, infinitely adjustable speed
The machine is in good technical condition, after prior agreement it is possible to test it. Control system: Siemens Sinumerick 840D Total hours: 12,058 h Operating hours: 5,039 h Worktable length: 1200 mm Worktable width: 5 Spindle rotation: 8000 1/min Number of axes: 3 X-axis travel: 1035 mm Y-axis travel: 560 mm Z-axis travel: 510 mm
CHIRON FZ 08K S Magnum HSP High-Speed CNC Machining Center TECHNICAL FEATURES: Year: 2007 NC Type: FANUC 18i-MB5 Number of axes: 7 X-axis travel: 450 [mm] Y-axis travel: 270 [mm] Z-axis travel: 310 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] A-axis angular travel: 360 [°] A-axis indexing accuracy: 0.001 [°] B-axis angular travel: -20° / +115 [°] B-axis indexing accuracy: 0.001 [°] Pin Attachment: HSK40 Maximum speed Spindle: 30000 [rpm] Number of tool magazine stations: 40 Installed power: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW probe type TS27R x1 Spindle Cooling Unit x1 watering tray x1 unit for 6th side machining x1SCHUNK gripping system x84 HSK40 Type Tool Holder x14 Collet Type F35 x1 Electrical Cabinet Air C ...
High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg
GeneralTraveling column machine; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal2000 mmCross800 mmVertical850 mmTool changerType of magazineChain Number of tools50 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmSwivelhead, B-axisControlled NC swivel milling head 12,000 rpm (B-axis) with clamping in position Continuously positioning NC- swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel speed: 50 rpm Swivel range: ±12Clamping System HSK-A 100Spindle taper HSK-A 100Speed range 20 -12000 rpmTorque (40% DC) 288 NmTorque (100% DC) 187 NmDrive power (40% DC) 44 kWDrive power (100% ...
bore capacity in steel (diameter): 32 mm arm length: 1230 mm table surface area: 1200 x 500 mm bore stroke: 180 mm feed - independent: 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds: 60 - 1800 U/min taper MK: 4 total power requirement: 2,7 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
A used cutting machine Polar 78XT Touch screen Side Tables Chrome-plated table Air table
Key data: 300 mm, 1130 mm, 300 mm
4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw
Key data: 300 mm, 1130 mm, 300 mm
4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw
Key data: 1200 mm, 1000 mm, 500 mm
Röders 3-Axis High-Speed Machining Center High-Dynamics Vertical Machining Center Engineered for optimal accuracy and continuous precision, this 2012 Röders RXU 1200 provides exceptional 3-axis CNC performance for advanced manufacturing and toolmaking. Technical Details 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RXU 1200 Machine number: 13761-12 Year of manufacture: 2012 2. Operational parameters Travel (X / Y / Z): 1200 mm / 1000 mm / 500 mm Clearance height: 600 mm Machining feed rate: 0 - 60,000 mm/min Table size: 1300 x 1100 mm Max. workpiece weight: 3000 kg Axis drives: Linear motors in all axes Spindle: GMN HCS170; 40.4 kW; 100 - 30,000 rpm Tool holder: HSK-F63 Tool magazine: 56 positions Max. tool diameter: 35 mm (HSK-F63) Operating hours: approx. 16,951 h Spi ...
Key data: 1200 mm, 1050 mm, 500 mm
Röders 3-Axis High-Speed Machining Center High-Dynamics Vertical Machining Center This 2013 Röders RXU 1200 is a top-tier 3-axis high-speed machining center engineered for maximum rigidity and flawless surface quality in complex milling operations. Technical Details 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RXU 1200 Machine number: 13761-12 Year of manufacture: 2012 2. Operational parameters Travel (X / Y / Z): 1200 mm / 1000 mm / 500 mm Clearance height: 600 mm Machining feed rate: 0 - 60,000 mm/min Table size: 1300 x 1100 mm Max. workpiece weight: 3000 kg Axis drives: Linear motors in all axes Spindle: GMN HCS170; 40.4 kW; 100 - 30,000 rpm Tool holder: HSK-F63 Tool magazine: 56 positions Max. tool diameter: 35 mm (HSK-F63) Operating hours: approx. 16,951 h Spindle ...
Key data: 1000 mm, 810 mm, 500 mm
Röders 3-Axis High-Speed Machining Center High-Dynamics Vertical Machining Center Featuring state-of-the-art drive technology, this 2018 Röders RXU 1001 delivers high dynamic performance and exceptional precision for demanding 3-axis machining applications. Technical Details 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RXU 1001 Machine number: 15355-14 Year of manufacture: 2018 2. Operational parameters Travel (X / Y / Z): 1000 mm / 810 mm / 500 mm Clearance height: 700 mm Machining feed rate: 0 - 60,000 mm/min Table size: 996 x 796 mm Max. workpiece weight: 2000 kg Axis drives: Linear motors in all axes Spindle: 40.4 kW; 100 - 30,000 rpm Tool holder: HSK-F63 Tool magazine: 40 positions Max. tool diameter: 30 mm Operating hours: approx. 56,106 h Spindle hours: approx. 27 ...
Key data: 500 mm, 400 mm, 240 mm
Röders 3-Axis High-Speed Machining Center Compact 3-Axis High-Speed Milling Machine This 2006 Röders RXP 500 is a dedicated 3-axis high-speed machining center, highly regarded in the industry for micro-machining and delivering impeccable surface finishes. Technical Details 1. Machine identification data Name: CNC High-Speed Milling Machine Manufacturer: Röders Model: RXP 500 Machine number: 11714-65 Year of manufacture: 2006 2. Operational parameters Travel (X / Y / Z): 500 / 400 / 240 mm Table size: 550 x 450 mm (T-slots: 14 mm, spacing 63 mm) Max. workpiece weight: 400 kg Axis drives: Linear motors in all axes Feed rate: 0 – 40,000 mm/min Spindle: 14 kW; 42,000 rpm Tool holder: HSK E40 Tool magazine: 21 positions (optional up to 42 positions) Max. tool diameter: 16 mm Connections (Electrical): 400 V 3-phase (390V - 410V) ...
Key data: 600 mm, 450 mm, 300 mm
Röders 3-Axis High-Speed Machining Center 3-Axis High-Speed CNC Machining Center A proven performer in industrial milling, this 1999 Röders RFM 600/2 delivers reliable 3-axis high-speed cutting designed for precision tooling and mold making. Technical Details 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RFM 600/2 Year of manufacture: 1999 Machine number: 88194-80 2. Operational parameters Travel (X / Y / Z): 600 / 450 / 300 mm Table size: 700 x 550 mm Max. table load: 800 kg Spindle speed: 42,000 rpm Spindle motor power: 14 kW Feed rate: 0 – 30,000 mm/min Rapid traverse: 30 m/min Tool changer: 18-position Operating hours: approx. 108,888 h Spindle hours: approx. 18,625 h Control: Röders RMS6 Connections (Electrical): 400 V; 20 kVA 3. Weights Total machine weight: approx. 52 ...
GeneralTraveling column machine DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal1800 mmCross700 mmVertical700 mmTool changerType of magazineChain Number of tools30 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,75 x 3,45 x 2,75 mWeight approx.14320 KgMiscellaneousClamping SystemDIN 69872 NC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel range: +/- 90° Swivel speed: 40 rpmFixed tableFixed TableTable ...
Highly dynamic precision milling machine OPS-INGERSOL EAGLE-V5 / Precision-Line Year of Make: 2025 Travel distances: X= 550 mm, Y= 400 mm, Z= 400 mm Table Type: Swivel Rotary Table / Torque Drives Spindle holder: HF spindle HSK-E40 with DDF; Fisherman Spindle speed: 1 - 42,000 rpm Spindle power: 15kw Torque S6 (60%) 6.7Nm Tool magazine: 100 places Control: HEIDENHAIN Weight: 8500Kg
CONTROLS conventional PRESS FORCES total force (nominal): 75 to PRESS TABLE table surface (left-right): 1250 mm table surface (front-back): 1110 mm SLIDE table surface (left-right): 960 mm table surface (front-back): 750 mm SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke adjustment: yes stroke min.: 10 mm stroke max.: 50 mm stroke rate (min.): 120 /min stroke rate (max.): 600 /min STRIP-FEEDER feeder type: roll feeder sheet width max.: 300 mm ELECTRICAL SPECIFICATIONS total power consumption: 15.5 kW DIMENSIONS / WEIGHTS total weight approx.: 13500 kg ATTACHMENTS (PRESSES) strip feeder: yes feeder type: roll feeder
bore capacity in steel (diameter): 40 mm arm length: 1050 mm workpiece height max.: - mm turning speeds: 15 - 2800 U/min feed range: 0,075 - 0,45 mm/min dimensions: 2450 x 1300 x 2300 mm Weight: 1500 kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton
Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton
Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7
Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5
Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton
Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Table clamping surface: 600 x 1800 mm Height adjustment of the boom: 450 mm small/large drilling radius: 305/1305 mm Spindle holder: SK 40 Quill stroke: 200 mm Spindle speeds infinitely variable: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency-controlled: 5.5 kW electr. Connection: 400 V, 14 kVA Weight: 3400 kg Space requirement: 3800 x 2000 x 2500 mm
Polar 115 ED AT Autotrim Optionally available Jogger RA-4 Year 2007 Lift LW 1000-4 Year 1999 Transomat TR 130-EL-4 Year 2001
x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm c-axis: 360 ° b-axis: +10 / -110 ° control: Heidenhain iTNC 530 : : 42000 min/-1 : 20 / 15 kW table surface area: dia 750 mm max. table load: 800 kg : : 30 pos. tool taper: HSK E 50 feeds:: feed speeds: max. 90.000 mm/min rapid traverse: 90 m/min total power requirement: 73 kVA weight of the machine ca.: 11 t dimensions of the machine ca.: 3,3 x 2,9 x 3,1 m High dynamic 5-Axis-Precision Center equipped with: - CNC ControlHeidenhein iTNC 530 - ATC 30-fold (HSK E50) - Chip Conveyor approx 57000H working hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
There is a Baumann Perfecta 115 high-speed cutter with Baumann Perfecta BSB 3L jogger, Schneider SENATOR unloader and Schneider SENATOR pile hoist available. 1) Baumann Perfecta 115 high-speed cutter, working height: 900mm, cutting width: 1150mm, insertion depth: 1150mm, max. layer height: 165mm, residual cut: 20mm, residual cut without cover plate: 77mm, weight: 3.2t, year of manufacture: 2022, 2) Baumann Perfecta BSB 3L jogger, load capacity: 1500N, connected load: 2.5kVA, year of manufacture: 2022, 3) Schneider SENATOR unloader, load capacity: 1t, lifting height: 900mm, year of manufacture: 1990, 4) Schneider SENATOR pile hoist, year of manufacture: 2022. An on-site inspection is possible.
Maximum Spindle Speed 2800 RPM Brand Weiler Power Source Electric Control Type Conventional Machine Weight (kg) 800 Chamfer Triple Model/Type VS1 Year of Manufacture 1979
Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 kN (20 T). Speed range: 100 – 1800 spm. Year of manufacture: 1996. Hours under power: 51574. Feed BBV 101/75 on the left-hand side. Max. strip width: 125 mm. Max. feed pitch: 85 mm. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm. Ram height adjustment: 51 mm. Dimensions of the clamping plate: 510 x 400 mm. Bed opening: 400 x 160 mm. Max. distance of the mold width between the columns: 410 mm. Max. strip passage width: 260 mm. Connected load: 51 kVA. Power 400 V 50 Hz. Control voltage: 24 V. Machine dimensions: H 2540 x W 1661 x D 855 mm. Machine weight: approx. 3100 kg. Control cabinet and control system. Including all original technical documentation. Machine is now under power. Sound cabin sold separately, not included in machine price.
maximum number of results exceeded
please refine your search
