high speed cutting used for sale

Laser power: 3,000 watts Type: A04B-0820-B342 Weight system: 750 kg Dimensions LxWxH: 205 x 75 x 120 cm Equipped with: -Stabilizer - Fanuc Power Converter DTU60/2/0/5S - CNC control Fanuc Series 31i-LB

Brand Hegla Type Cutting table Layered Fashion model VSG-H Serial Number 1104 Construction year Jun-95 Weight 3 tons Assets 19 kW Air pressure 6 bars Water pressure: 50Hz Length mm 3700 Width mm 3400 Working height mm 980 Min.-max. glass thickness 2 x 3mm to 2 x 6mm Number of cutting heads 2 cutting heads Separation heating and air cushion Automatic sequence for cutting, breaking, heating and separating functions. Electric connection 380/ 400V Photos/film available: Photos available

This grinder has 2 fixed knives and 12 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.

S. No.: 3392-014 Format (cm): 76 Equipment / Additional information: Side tables, air table, 1xreserve knife

Control Fanuc Series 180iS-WB Travel: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm, max. workpiece weight 500 kg, Kdswswl Hiiovu Nu Iol Machine weight 1,700 kg, Power supply 13 KVA Machine can be viewed under power.

Inv. Num. : 8405 Type: Peddimax No 1 Producer: Peddinghaus Created: 2019 Parameters: Operating hours: 150 h Strength: 140 t Pressure: 300 bar Equipment: Flaps

A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioni ...

A CNC CO2 laser cutting machine Amada with automated storage system LKI is available. 1) Laser power: 4kW (4000W), travel X/Y/Z: 3100mm/1550mm/100mm, max. table load: 920kg, max. material thickness steel/stainless steel/aluminum: 20mm/12mm/10mm, laser system dimensions X/Y/Z: approx. 10000mm/4300mm/2100mm, weight: approx. 11000kg. 2) Pallets: 8, cutting pallets: 2, raw material: 2/3, unloading: 4/3, max. unloading height: 2200mm, max. material dimensions X/Y: 3050mm/1525mm, min. sheet dimensions: 2000mm/1000mm, height: 5400mm. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible.

Laser power: 10kW (10000W), working range: 3000mm/1500mm, max. material thickness: mild steel: 25mm, stainless steel: 30mm, aluminum: 30mm, copper: 12mm, brass: 15mm. Positioning speed: 120m/min, positioning accuracy: +/-0.05mm, max. workpiece weight: 1100kg. Machine dimensions X/Y/Z: approx. 9500mm/3500mm/3500mm, suction dimensions X/Y/Z: approx. 1500mm/1500mm/4000mm, machine weight: approx. 12000kg, operating hours: approx. 17000h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.

Working area X/Y/Z: 3000mm/1500mm/115mm, laser power: 3200W (3,2kW), laser type: Trumpf Trumatic TC L 3020, max. material thickness steel: 20mm, cutting heads: 2x. Machine dimensions X/Y/Z: approx. 4600mm/9300mm/2000mm, weight: approx. 10500kg, laser hours: 56738h, beam hours: 26243h. Including cooling circuit filter unit Riedel and pallet changer. The door of the machine has an error in the acknowledgement. This can be easily solved by pressing the acknowledgement button and the cancel button. Documentation available. On-site inspection is possible.

Track height: 500mm, track length: 14,000mm, cutting length: 12,000mm, cutting width: 3000mm, cutting thickness: 150mm, table height: 700mm, connected load: 2kVA, length: 2250mm, height: 1900mm, width: 5270mm, weight: 2.5t. The machine is not functional, but mechanically in order. The computer still runs under Windows XP and needs a new program. With documentation, without accessories. On-site inspection is possible.

A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, position accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Available from Q1 2025.

x-travel: 0 mm y-travel: 0 mm table length: 600 mm table width: 400 mm total power requirement: 2 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HSK63-B,F Test Mandrel Suitable for Vollmer machine types: QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 and all models from the QXD series (200/250/400)

Adaptor for A-axis HSK63-B,F For manual and automatic loading. Suitable for Vollmer machine types: QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 and all models from the QXD series (200/250/400)

Wire guide elements for metal, spacing 100-200 mm, 15 mm longer Using these wire guide elements reduces the diameter of the workpieces that can be machined. Suitable for Vollmer machine types: QWD 76 P / QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500

A Getecha plastic granulator is available. Rotor diameter: 300mm, cutting width min./max.: 400mm/1260mm, number of rotor knives: 5, power: 5.5kW. Including an enlarged control cabinet. Overhauled with less than 100 operating hours. Documentation available.

A Rapid heavy-duty granulator is available. Only unreinforced polyolefins were ground with the mill, so it was not subjected to any load. Flour chamber opening X/Y: 1050mm/600mm, motor power: 75kW, rotor knives: 2x5, stator knives: 2, sieve: 8mm, throughput: depending on material. Machine dimensions X/Y/Z: approx. 2750mm/2100mm/2850mm, machine weight: approx. 4550kg. Documentation available. On-site inspection is possible.

Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without com ...

Application: bread and pastry products, belt length: 1250mm, belt width: 610mm, dough thickness range: 0mm-35mm, dough weight range: 200g-2400g. On-site inspection is possible.

A carpet tile cutting machine is available. Working width: 2000mm, machine dimensions X/Y/Z: approx. 2100mm/4500mm/2500mm, weight: approx. 3000kg. The machine cuts carpeting into 4 square tiles using automatic recognition by cameras (year of manufacture: 2005). The machine was part of a larger system and is therefore no longer able to run independently. In order to be able to run independently, the system must be completely rebuilt/reprogrammed in terms of PLC technology. Documentation available. On-site inspection is possible.

A CadCam CO2 laser cutting machine for the textile, wood, paper and plastics industries is available. Working dimensions X/Y: 2000mm/3000mm, max. axis speed: 1m/s, acceleration: 2G. Including various accessories. Documentation available. On-site inspection is possible.

An EAS water jet cutting system for the food industry, especially for bread, cakes and pizza, is available. 1) High-pressure unit for water hydraulics Power Pack 11kW Hygienic Design, max. pressure: 3200bar, max. flow rate: 1.7l/min, motor power: 11kW, pump: Hammelmann HDP 24, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1450mm, weight: approx. 365kg, control: Siemens Simatic S7. 2) Aquatil food cutting machine, max. pressure: 3200bar, max. delivery rate: 1.7l/min, cutting speed: 18m/min, max. table load: 45kg, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1650mm, weight: approx. 265kg, control: EAS(Y)-Touch. Documentation available. On-site inspection is possible.

Max. Glass sheet dimensions X/Y: 6000mm/3210mm, cutting accuracy: +/-0.5mm, cutting speed: 150m/min, weight: approx. 900kg. Documentation available. On-site inspection is possible.

Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, rated current: 12.5A, peak current: 25A, rated power: 8.65kW, max. power: 17.3kW. Applications: Laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2200mm, weight: approx. 4000kg. Documentation available.

A Bottero glass cutting machine is available. Cutting thickness range: 2mm-19mm, max. glass dimensions X/Y: 3650mm/2750mm, weight: approx. 1650kg. On-site inspection is possible.

An Aristo plotter equipped for solid and corrugated board with Multihead OT.T.M.P. II-2 is available. Working width: 2000mm, working length: 3200mm, static repeat accuracy: +/-0.08mm, max. speed: 2.3m/s, max. acceleration: 2G, max. material passage height: 55mm, vacuum pump power: 5.5kW. Machine dimensions X/Y/Z: approx. 2700mm/4250mm/1100mm. Documentation available. On-site inspection is possible.

A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible.

Corrugation types: F/W/E/B/C, double corrugation types: FF/FE/FB/EB, gray board weight: 600g-1200g/m², board thickness range: 0.15mm-6mm, grammage capacity: 180g-1200g/m², min. sheet size: 590mm/700mm, max. sheet size: 1015mm/1410mm, blade size X/Y: 995mm/1390mm, sheet start to 1st blade: 15mm. Documentation available. On-site inspection is possible.

Manufacturer: Epilog Model: 8000 Laser System Year of Manufacture: 2017 Mass: 80 kg max Laser Classification: Class 2 Laser Product Vacuum pump: GAST DOA-P725-BN Air filter: vacu Air UML 380 (AD Oracle IQ) Find more here - / Contact us at -

Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW

Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition

Guowang Cutting Machine K137CL (2008) Well-maintained cutting machine by Guowang, model K137CL, year of manufacture 2008. This machine has served us reliably for many years and is still in very good condition. Specifications and extras: • Includes 2 Widia cutting knives, only sharpened twice • Software is up to date • Always professionally serviced with annual maintenance by a certified technician • Fully compliant with all current safety inspections • Comes with various spare parts, manuals, and electrical schematics • Equipped with high-quality, European components from brands like Omron, Moeller, and Leuze

Offer 22252 Specifications: - Cutting range at 90° round + square 330 mm - flat 600 x 320 mm - Mitre adjustable left / right 30 / 45 ° - Schnittb. at 45° Re + Li around 320 mm - flat 350 x 320 mm - Material support height approx. 920 mm - Saw blade dimensions 4440 x 34 x 1.1 mm - Cutting speed infinitely variable 10 to 100 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - hydr. Material vise - Coolant device - Total drive power 400 V / 2.2 kW - Space requirement approx. W 1400 x H 1400 x D 2400 mm - Weight approx. 1000 kg

Key data: 450 mm, 320 mm, 162 mm

For sale Charmilles wire EDM machine type Robofil 4020.1. The machine is in very good condition. Still to be seen under power. Lots of accessories!

Offer 25101 Specifications: - Cutting range at 90° around 400 mm - flat W 400 x H 400 mm - Cutting area at 45° flat W 320 x H 320 mm - Cutting area at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw blade dimensions 5090 x 34 x 1.1 mm - Cutting speed infinitely variable 17 - 90 m/min - hydr. Lifting – lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant device - Roller conveyor feeder 7000 mm - Discharge – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Paper cutting machine Schneider Senator 078E-Line, machine number: M-078E-018-11/20-05E, year of construction 2005, air table, side table, light flashes, program control, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Rsbr Sb Nowivimewksu You are welcome to visit the machines in our house by prior appointment.

Cutting machine IDEAL 4850-95 EP, machine number 3185364, year of construction 2007, program control, safety protective cover, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment. Rebrjq Nl T Ns Sb Nwkju

INTERMAC PRIMUS 184 3D waterjet cutting machine was built in 2022 in Italy. This extremely powerful machine is designed for precise 3D machining of any type of glass. The process is performed by a 5-axis cutting head, which offers unlimited machining capabilities. It allows, among others, the cutting of complex patterns and the cutting of holes of any size with extreme ease. In order to guarantee excellent stability during even the most intensive challenges, the machine design is made of stress-relieved stainless steel. The movement of the X and Y axes is performed on hardened and ground tooth guides of high precision. On the other hand, the Z-axis moves via a prismatic recirculating ball screw. All the table’s travel components are protected by leak-proof covers. The offered PRIMUS 184 WaterJet also features an extensive equipment, which includes e.g. intuitive CAD/CAM software, ...

Paper cutting machine Polar 115 E, machine number 6731425, year of construction 1997, air table, light barriers, program control, Colour monitor, lift, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Rsbr Sevhatbsb Nwkeu You are welcome to visit the machine in our house by prior appointment.

Paper cutting machine Polar 72 CE, 1 spare blade, machine number 4551421, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Rebr Sjvtytfjb Nwkou You are welcome to visit the machine in our house by prior appointment.

Cutting machine IDEAL 5221-05 EP, machine number 2848081, year of manufacture 2008, in good condition, immediately available Rsbr Sbovt Rt Ao Nwkou If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible.

Cutting machine POLAR 58 EM Built in 1993 Art.Nr. L1017

Dreher Delta 20/40 granulator for the size reduction of injection mouldings or hollow plastic bodies with a medium cross-section, rotor diameter 200 mm, working width 400 mm, 3 rotor blades and 2 stator blades, infeed opening 200 x 400 mm, cyclone and bagging opening with a diameter of 304 mm, capacity 40-180 kg/h, electrical connection 400V/50Hz, connected load of granulator 7.5 kW, connected load of extraction 0.75 kW, connected load of control unit 1.0 kW, machine floor space approx. 2500 x 950 mm (WxD), machine height approx. 1950 mm, machine net weight approx. 800 kg

Deritend rotary boardcutter workingwidth 130 cm automatic vacuum feeder by hopper 7 sets of rotary knives

Tip width: 430mm Tip Height: 120mm Spindle bore: 23mm Spindle speeds: 60-3000 RPM Short taper spindle head DIN 4 Tailstock MK2 Feeds from 0.03 to 2.5 mm Weight approx. 360 kg New Aikron 3-axis digital display, brake of spindle motor renewed, technically checked. Accessories: Collet device, lathe chuck Quick-change steel holder 

BYSTRONIC Byspeed 4020 laser cutting machine was built in 2007 by the Swiss brand BYSTRONIC. The machine, designed to meet the highest industrial standards, is used for precision cutting and engraving of workpieces with a maximum thickness of 20 mm. The machining process is performed by a stable laser beam with a maximum power of 4.4 kW, which is generated by a reliable laser source of the highest energy efficiency. In turn, the operator’s daily work is facilitated by an intelligent CNC control with many useful functions. All this makes the offered BYSTRONIC laser the perfect choice for any industrial plant. The last inspection of the machine was done in 2024. The Byspeed 4020 laser cutting machine weighs 19000 kg. Technical specifications of the BYSTRONIC Byspeed 4020 laser cutting machine - CNC controller: BYSTRONIC ByVision - laser power: 4.4 kW (4400 W) - laser type: CO2  ...

BYSTRONIC ByStar 4400 laser cutting machine was built in 2006 by the Swiss brand BYSTRONIC. The machine, designed for precision cutting and engraving of sheet metal, is an excellent choice for any industrial plant. The machining process is performed using a stable 4.4 kW laser beam, which is generated by a resonator of the highest energy efficiency. As a result, the edges of the machined workpieces stand out for their unprecedented smoothness and lack of unevenness. ByStar 4400 laser cutting machine is offered with a range of equipment, including among others an intelligent CNC control and a KELLER industrial dust collector. The machine has undergone regular inspections and is ready for further use. BYSTRONIC laser weighs 13500 kg. Technical specifications of the BYSTRONIC ByStar 4400 laser cutting machine - CNC controller: BYSTRONIC ByVision - laser power: 4.4 kW (4400 W) - max ...