high speed cutting used for sale

Specifications: Year of construction approx. 1988 Center height 120 mm Center width 430 mm Speed: 60 - 3000 rpm in 18 gear stages Spindle Passage 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feeds from 0.03 to 0.15 mm /rev Possible Threads Metric, Inch, Module and Diametrical Pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m

Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW

Key data: 6000 mm, 2000 mm

Ref.Nr. 00846 Name of the system: Used waterjet machine Spare parts system Manufacturer Flow Model Foracon WS3-20/602KS Built in 1995 Sheet size 2000mm x 6000mm Achievement 9Kw ( Engine ) 2 pumps (flow) 2 cutting heads Operating hours pump 1 = 19700 h Operating hours pump 2 = 24751 h Incl. sand tower Incl. sludge removal system Renewal of the control system 2016 ( Engelmann company ) Condition of the system was disconnected a week ago Is still under power but cannot be demonstrated because the cables have been cut during disconnection Customer has used the system until the end Submission date Immediately

Air table Polar; cleaned and tested; Format 75x35cm; height-adjustable. AIr table Polar; cleaned and checked; size 75x35cm; adjustable in hight.

Cutting chamber: 810 x 600. Staggered open rotor with 5 rows of blades on the rotor. Engine: 75 hp. With electrical panel and vacuum cleaner: 7.5 hp.

TRUMPF TruLaser 5030 L68 fiber laser was built in 2017 in Germany by Trumpf GmbH + Co. KG. The machine, designed for precision machining of sheet metal made of structural steel, stainless steel and aluminium, is offered with state-of-the-art components and extensive equipment. These include a resonator with the highest energy efficiency, which generates a stable 3 kW fibre optic beam. The mobile, adaptive lens system located in the universal cutting head ensures optimum beam geometry for different sheet thicknesses and materials, resulting in the highest cutting quality at maximum feeds. In addition, special systems incorporated in the machine allow for the machining of waste material. The laser power is regulated analogously to the feed rate on the advanced SIEMENS SINUMERIK 840D SL CNC control. What’s more, the workshop programming integrated into the control system allows program ...

ECKERT SZAFIR BL2 plasma cutting machine was built in 2022 in Poland by Eckert AS Sp. z o.o. The machine, designed for precision cutting sheet metal made of structural steel, stainless steel and aluminium, is distinguished by its large 6 metre long and 2 metre wide sectional work table. The large area of the table makes it possible to efficiently machine a single oversized workpiece or multiple sheets at the same time, guaranteeing a high level of user comfort through the ongoing elimination of contamination. In addition, the portal structure based on a welded steel profile ensures excellent stability of the machine geometry, which does not become unstable under heavy loads. The SZAFIR BL2 plasma cutting machine has worked approximately 867 hours to date. Technical specifications of the ECKERT SZAFIR BL2 plasma cutting machine - CNC controller: ECS 872 - work table dimensions (L x W ...

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL PAA 9001.25 Year of Make: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with power source Kjellberg HiFocus 280i 2 oxyfuel burners propane Beuting vibrating conveyor table Donaldson DFPRO12 filter system for outdoor installation

Air table 2 side tables 3 knives Photocells Program Video available upon request

Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Cross-cut saw motor 1.8 kW Milling motor above 1.8 kW Milling motor bottom 1.8 kW Sliding table with Superfix hand clamp Saw blade 2 slotted discs

Cross-cut saw diam. 300 mm Milling spindle diam. 40 mm Sliding table with Festo length stop Suction nozzle saw 120 mm dto. Milling machine 140 mm Cable + plug 16 Amp, without bed. tools Workshop overhauled

TRUMPF TruLaser 5030 fiber laser was built in 2015 in Germany by Trumpf GmbH + Co. KG. The machine, which is designed for precision machining of sheet metal made of among others structural steel, copper and aluminium, is characterised by the use of state-of-the-art technical solutions that significantly affect the cutting quality and expand the machine’s machining capabilities. Laser cutting is performed by means of a stable fibre-optic beam with a maximum power of 5 kW, which is flexibly guided from the resonator to the cutting head with an adaptive lens system. This system ensures optimum beam geometry for different sheet thicknesses and materials, resulting in the highest cutting quality, at maximum feed rates. In turn, the laser power is regulated analogously to the feed rate on the intuitive SIEMENS SINUMERIK 840D SL CNC control. The workshop programming integrated into the con ...

Self-learning lathe CMT TCH 700 x 5000 :::TECHNICAL SPECIFICATIONS::: CNC model: ECS - Spindle nose: ASA 11 - Spindle power: 35Kw - Turning diameter on the bench: 720mm - Turning diameter on the carriage: 385mm Turning length: 5000mm - Number of revolutions: 2200 - Bar passage: 105mm - Mechanical range change: yes - Number of ranges : 2 Turret: automatic Number of tool turrets: 1 Number of tool positions for the first turret: 12 First turret tool attachment type: VDI First turret X-axis travel: 450mm Z-axis travel first turret: 5000mm :::D DIMENSIONS AND WEIGHT::: Weight: 8000Kg

BLM-ADIGE JUMBO LT14 tube laser cutting machine was built in 2014 in Italy by BLM S.p.A. The machine’s high versatility and extensive machining capabilities make it the perfect choice for precision machining of tubes, open profiles, I-beams and special profiles of large dimensions. It will significantly reduce the cost of producing a single component and improve the quality of cutting compared to other technologies available on the market. The BLM-ADIGE LT JUMBO 14 3D tube laser cutting machine performs machining fully automatically, without the need for retooling or manual adjustments. Once the workpieces have been fed in, the loading unit with conveyor system segregates them according to cross-section, diameter and length. The workpiece is then moved towards the work area, where it is held by three special spindles that eliminate uncontrolled movements and guarantee more precise,  ...

ZINSER 2425-I plasma cutting machine was built in 2013 in Germany by ZINSER GmbH. The machine, which is designed for precision cutting, marking and bevel cutting of tubes and sheet metal, has AC servo drives with precision planetary gears that guarantee excellent handling characteristics at high speeds and rapid direction changes. For the machining process, plasma or oxy-fuel torches are used, which move along the large work table on two linear guides. A sturdy portal structure with an efficient filtration system further eliminates any contamination, leaving the work area safe and comfortable. All this is complemented by a state-of-the-art CNC control with touchscreen. The ZINSER 2425 plasma cutting machine weighs 1325 kg. Technical parameters of the ZINSER 2425-I plasma cutting machine - CNC controller: ZINSER CNC 5010 - input power: 4000 W - maximum workpiece thickness: 200 mm - ...

CORMAK LF3015LNR laser cutting machine was built in 2021 by the Polish company CORMAK. The machine, which is designed for precision cutting of tubes, sheets and profiles, uses advanced FIBER technology to machine even the hardest materials of various thicknesses. This technology is a much more cost-effective alternative to CO2 machines of similar power, while also guaranteeing low operating costs and trouble-free operation for many years of use. The workpieces are machined with a reliable RAYTOOLS cutting head with autofocus and protective glass. It moves along a sliding gantry made of aircraft aluminium. The installed software automatically adjusts the focus lens from -10 mm to +10 mm, ten times faster than standard manual adjustment. Both the collimator lens and the focus lens are equipped with a heatsink to reduce the temperature of the cutting head and thus extend its service life ...

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

table length: 8000 mm table width: 2500 mm burner heads: 1 control: Selectron CNC 96 output: 4 kw total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 6000 mm table width: 2500 mm burner heads: 1 z-axis: 210 mm Table load: 2600 kg total power requirement: 3 kW weight of the machine ca.: t dimensions of the machine ca.: m capacitive tactile sensing changing table Nachtaktmöglichkeit filter system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Cutting Machine Fischer Hartmannsdorf OK S TZ 2 Year: 1981 0.37 kW 220 / 380 V Dimensions: 350 x 180 x 480 mm Weight: 11.5 kg

Cutting Wheel Set RIDGID E-1032 Diameter: 38.6 mm Cutting Depth: 11 mm Cutting Wheel Set consists of 6 cutting wheels ! New ! Dimensions(Packaging): 80 x 60 x 45 mm

Cutting dies, tapping dies, hexagonal JBO R1.1/2 HSS Wrench size: 85 mm New ! Dimensions: 98 x 85 x 22 mm

CNC Flame Cutting Machine BACH APOLDA AC 2500 Year: 1993 Control: MESSER GRIESHEIM KS20A Dimension : 3800 x 2000 mm 2 burners oxygen, propane without table ! Rails 8 meters (2 x 8 meters) used, tested ! Documents available. Dimensions : 3800 x 2000 x 2000 mm

Cutting dies, tapping dies, hexagonal JBO R1.1/4 HSS Wrench size: 70 mm New ! Dimensions: 81 x 70 x 20 mm

CNC Flame Cutting Machine, Plasma Cutting Machine BACH APOLDA ACW 2500 Year: 2001 Control: NBS 400 Dimensions of System: 4100 x 1900 x 1500 mm without table: rail 8 meter (2 x 8 meter) 2 oxy-fuel cutting heads 1 plasma cutting head MANNSFELD PGS 50 74 kVA Bj.: 1988 without table ! used, tested ! Dimension plasma equal: 1600 x 660 x 1500 mm

Cutting dies, tapping dies, hexagonal JBO R1 HSS wrench size: 60 mm New ! Dimensions: 69 x 60 x 18 mm

Cutting dies, tapping dies, hexagonal JBO BSP G3/4 HSS Wrench size: 60 mm New ! Dimensions: 69 x 60 x 18 mm

Cutting dies, tapping dies, hexagon EMUGE G3/4 HSS ISO 228 Wrench size: 50 mm New ! Dimensions: 56 x 50 x 16 mm

Cutting dies, tapping dies, hexagon EMUGE G1A HSS ISO 228 wrench size: 60 mm New ! Dimensions: 68 x 60 x 18 mm

Cutting dies, tapping dies, hexagon JBO BSP G1 HSS Wrench size: 60 mm New ! Dimensions: 69 x 60 x 18 mm

Cutting Dies, Tapping Dies RAXA 6M R2 HSS Diameter: Ø 105 mm New ! Dimensions: 105 x 105 x 22 mm

Cutting dies, tapping dies PAGUS R1.1/2 HSS diameter: Ø 90 mm used ! Dimensions: 90 x 90 x 22 mm

Cutting Dies, Tapping Dies RAXA 6M R1-1/4 HSS Diameter: Ø 75 mm New ! Dimensions: 75 x 75 x 20 mm

Cutting dies, tapping dies PAGUS R1 6110-1n HSS diameter: Ø 65 mm New ! ! Dimensions: 65 x 65 x 18 mm

Cutting dies, tapping dies EMUGE R1 HSS diameter: Ø 65 mm New ! Dimensions: 65 x 65 x 22 mm

Cutting dies, tapping dies FW R1-1/4 HSS Diameter: Ø 75 mm New ! Dimensions: 75 x 75 x 20 mm

Cutting head ROLLER ́S CENTRAL M32 x 1.5 holder: Ø 64 mm Dimensions: 80 x 84 x 84 mm

Cutting head ROLLER ́S CENTRAL M40 x 1.5 holder: Ø 64 mm Dimensions: 80 x 92 x 92 mm

Cutting head ROLLER ́S Central R1/2 holder: Ø 64 mm Dimensions: 80 x 70 x 70 mm

Cutting head ROLLER ́S Central R3/4 holder: Ø 64 mm Dimensions: 80 x 70 x 70 mm

Cutting head ROLLER ́S Central R1.1/4 holder: Ø 64 mm Dimensions: 80 x 95 x 95 mm

Cutting head ROLLER ́S ROLA-H Pg 16 holder: Ø 64 mm Dimensions: 120 x 86 x 86 mm

Cutting head ROLLER ́S ROLA-H Pg 21 holder: Ø 64 mm Dimensions: 120 x 86 x 86 mm

Cutting head ROLLER ́S ROLA-H Pg 29 holder: Ø 64 mm Dimensions: 125 x 100 x 100 mm

Cutting head ROLLER ́S CENTRAL M25 x 1,5 holder: Ø 64 mm Dimensions: 80 x 80 x 80 mm

Holder for tapping head WMW Z39 Outer diameter: 180 mm Inner diameter: 45 mm Dimensions: 180 x 180 x 125 mm  

Hego cut-to-length line Working width 500x2mm Speed 10-12m/min Decoiler mechanical max. 1000kg Coil inner diameter 400/508mm Straightener with 9 straightening rollers and 2 feed rollers and film unwinders The offer is aimed exclusively at tradespeople within the meaning of §14 BGB no sale to private individuals!

Bread slicer Band slicer PS Mako Slicer 400 - Ribbon bread slicer - Manufacturer: PS Mako - Type: Slicer 400 - Operating voltage: 400 volts - Rated current: 8A - Year of construction: 2002