129,243 used machines on RESALE, but how to find them? Machine Search
Please note! Does not handle Auction-ID: A1-41275-56
High Speed Mixer Manufacturer: GEA Aeromatic Fielder Type PMA 65 Year of manufacture 2004 Serial number 00208.1310 Very good condition High-speed GMP grade mixer granules 316 stainless steel with mirror polished finish for all product contact surfaces. The capacity of the mixing tank is about 65 liters, the minimum product content is 25 kg, depending on the product density. Rotor speed 1 45-450 rpm Speed rotor 2 1500-3000 rpm Choppers The mixing tank lid has a filter housing and an inflatable seal that is automatically activated. The machine has a rinsing system for the bowl and the seals. The mixing bowl has an external stainless steel heater / cooling jacket with 2 bar/80c max, 7 liters/min.
Attention, fall has damage! Works properly! Auction-ID: A1-41991-28
Here, 40 feet of containers of Super High Cube DBCL40HCW with 1-2 sea routes 90.1 cubic meters volume will be auctioned. Due to the special internal dimensions, especially the interior height of about 3 meters, these containers are suitable as a storage area, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please observe these neutralization obligations before submitting a bid • The buyer or buyers are obliged to return the container(s) w ...
Here, 40 feet of containers of Super High Cube DBCL40HCW with 1-2 sea routes 90.1 cubic meters volume will be auctioned. Due to the special internal dimensions, especially the interior height of about 3 meters, these containers are suitable as a storage area, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please observe these neutralization obligations before submitting a bid • The buyer or buyers are obliged to return the container(s) w ...
Here, 40 feet of containers of Super High Cube DBCL40HCW with 1-2 sea routes 90.1 cubic meters volume will be auctioned. Due to the special internal dimensions, especially the interior height of about 3 meters, these containers are suitable as a storage area, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please observe these neutralization obligations before submitting a bid • The buyer or buyers are obliged to return the container(s) w ...
Here, 40 feet of containers of Super High Cube DBCL40HCW with 1-2 sea routes 90.1 cubic meters volume will be auctioned. Due to the special internal dimensions, especially the interior height of about 3 meters, these containers are suitable as a storage area, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please observe these neutralization obligations before submitting a bid • The buyer or buyers are obliged to return the container(s) w ...
Here, 40 feet of containers of Super High Cube DBCL40HCW with 1-2 sea routes 90.1 cubic meters volume will be auctioned. Due to the special internal dimensions, especially the interior height of about 3 meters, these containers are suitable as a storage area, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please observe these neutralization obligations before submitting a bid • The buyer or buyers are obliged to return the container(s) w ...
Here, 40 feet of containers of Super High Cube DBCL40HCW with 1-2 sea routes 90.1 cubic meters volume will be auctioned. Due to the special internal dimensions, especially the interior height of about 3 meters, these containers are suitable as a storage area, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please observe these neutralization obligations before submitting a bid • The buyer or buyers are obliged to return the container(s) w ...
Here, 40 feet of containers of Super High Cube DBCL40HCW with 1-2 sea routes 90.1 cubic meters volume will be auctioned. Due to the special internal dimensions, especially the interior height of about 3 meters, these containers are suitable as a storage area, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please observe these neutralization obligations before submitting a bid • The buyer or buyers are obliged to return the container(s) w ...
Here, 40 feet of containers of Super High Cube DBCL40HCW with 1-2 sea routes 90.1 cubic meters volume will be auctioned. Due to the special internal dimensions, especially the interior height of about 3 meters, these containers are suitable as a storage area, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please observe these neutralization obligations before submitting a bid • The buyer or buyers are obliged to return the container(s) w ...
Here, 40 feet of containers of Super High Cube DBCL40HCW with 1-2 sea routes 90.1 cubic meters volume will be auctioned. Due to the special internal dimensions, especially the interior height of about 3 meters, these containers are suitable as a storage area, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please observe these neutralization obligations before submitting a bid • The buyer or buyers are obliged to return the container(s) w ...
8 motors with 8 fans Auction-ID: A7-45702-30
bore capacity in steel (diameter):1-13 mm The machine has a 2.2 kW spindle motor with a 2-stage gearbox for drilling and tapping. Table size is 100 x 50 cm Stroke length approx. 200 mm
turning speeds:10000 U/min output:22 kw weight approx.:20 kg transmission ratio:1: 4,3 high speed spindle with 1 : 4,3 ratio, MK 5 spindle taper and collet chuck for tooling. Misc. parts in wooden case.
Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5
Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7
Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton
Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton
One used guillotine Polar 115EMC MON year 1994 with monitor programming sidetabes chromed table
A used cutting machine Polar 92 E Year of manufacture 1996 Devices Air table Side Tables Display Program
small fine construction with 3 RPMs clockwise and 3 RPMs counterclockwise
AVK generator , alternator 2840 kva 400volt year 2008
Key data: 40 mm, 900 mm
40 DONAU fully functional, Condition : well used
Conveying height 1,290 mm Inlet height 620-780 mm Tablet diam. 3-25 mm Deduster path total length 15 m Conveying capacity depending on tablet size 68,000-3,500,000 tablets/h 2 inlet adapters: rectangular 115x80 mm and round with diam. 60 mm nozzle Programme control C920 with HMI Allen-Bradley Panel View Plus 600 Distributor V4000 with 6 outlets, automatic/manual change of outlets selectable via HMI Metal check Lock Met 30+ with its own HMI Bad ejection into glass container PLC Allen-Bradley MicroLogix Drive 100-240V/50/60Hz Nozzle for dust extraction Mobile
The scope of delivery includes: 01x Truss strut, new Manufacturer: Mecalux Material colour: sendzimir galvanised Overall length: approx. 1,218 mm Center-center hole: approx. 1,164 mm f. Frame profile width: 100 mm Ø drill hole: approx. 10 mm U-profile dimensions: 70 x 30 mm Material thickness: approx. 1.5 mm Weight: 1.78 kg | Pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
The scope of delivery includes: 06x Steel panel, used Manufacturer: SSI Schaefer Total depth: approx. 960 mm Inner depth: approx. 955 mm f. Stand depth: 950 mm Total width: approx. 300 mm Material thickness: approx. 2.50 mm Material colour: sendzimir galvanised Frame profile: approx. 300 x 40 x 20 mm Weight|pcs.: approx. 7,940 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Pallet racking: yes, 1.Upright frame parts pcs.: 2, 1.Height mm Depth mm: 3300 X 650, 2.Upright frame parts Pcs.: 6, 2.Height mm Depth mm: 4060 X 650, 1.Crossbeam Pcs.: 24, 1.Crossbeam Length mm: 4000, Shelf load kg: ca 2000,
Manufacturer: unknown, Pallet rack: yes, 1.Upright frame parts pcs.: 2, 1.Height mm Depth mm: 2500/1100, 1.Crossbeam pcs.: 8, 1.Crossbeam Length mm: 2700, Shelf load kg: ca.1500,
Jungheinrich ESE 20 high-speed electric pallet jack truck RA2397 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90074846 Battery change: 2016 TÜV: until 2023 Operating hours: 4267 h Fork length: 1930 mm Fork width outside: 540 mm Maximum load capacity: 2000 kg Lifting: 125 mm Travel speed 8.5-12.5 km/h Including: Instrument cluster and information and service display Quick charger 380V Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics
High-temperature chamber furnace with an operating temperature of up to 2,000 °C, including water cooling and sequence control with automatic valves. Usable space: 600 mm x 600 mm x 600 mm (= 220 l.), el. Power: 117 kW,
Offer 25094 Specifications: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 60 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 225 mm - Drilling spindle speeds infinitely adjustable 35 – 950 rpm - Right - Counterclockwise rotation - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 360 mm - Max. distance from drill spindle to table / base plate 740 / 1220 mm - Table with 2 T-slots 700 x 590 mm Height adjustable via rack with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space requirement approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - with: - Emergency stop button -Lighting - Coolant device
Jungheinrich ESE 20 high-speed electric pallet jack truck RA2396 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90079958 Battery change: 2016 TÜV: until 2023 Operating hours: 6431 h Fork length: 1150 mm Fork width outside: 540 mm Maximum load capacity: 2000 kg Lifting: 125 mm Travel speed 8.5-12.5 km/h Including: Instrument cluster and information and service display Quick charger 380V Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics
A Willems welding machine for plastics is available. Tables: 2, welding area: 500mm/400mm, pressing force: 20kN, frequency: 27.12MHz, generator output: 10kW, overhauled in 2007, documentation available. On-site inspection is possible.
Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW
: 40 1008 rated current: 20 A voltage: 24 V weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25170 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Level 3 120 - 420 rpm - Level 4: 420 - 1530 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance machined base plate - drilling spindle 1250 mm - Coolant device -Lighting - Machine vise - div. 10 pcs HSS - Drill - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg
FOR SALE: BRUDERER BSTA 50USL High-Speed Stamping Press With Automatic Strip Feeder BBV 190 500 kN | 100–1120 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 500 kN Stroke rate: 100–1120 strokes per minute Working hours: 41000 h Main motor: 22 kW Control voltage: 24V DC Power connection: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 /44 / 51 mm Shut height adjustment: 64 mm Working Dimensions: Max tool installation width: 1100 mm Strip pass width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Strip entry height adjustable: 60–140 mm Max strip width: 120 mm Max feeding pitch: 85 mm Max material thickness: 4 mm Feeding angle: 180 Deg Machine Dimensions (with BBV 190): Machine footprint (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 1 ...
CONTROLS conventional PRESS FORCES total force (nominal): 75 to PRESS TABLE table surface (left-right): 1250 mm table surface (front-back): 1110 mm SLIDE table surface (left-right): 960 mm table surface (front-back): 750 mm SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke adjustment: yes stroke min.: 10 mm stroke max.: 50 mm stroke rate (min.): 120 /min stroke rate (max.): 600 /min STRIP-FEEDER feeder type: roll feeder sheet width max.: 300 mm ELECTRICAL SPECIFICATIONS total power consumption: 15.5 kW DIMENSIONS / WEIGHTS total weight approx.: 13500 kg ATTACHMENTS (PRESSES) strip feeder: yes feeder type: roll feeder
General Information Product Type: High Flow Oil Cooler Application: Designed for cooling oil in large machinery Cooling Units: 3 identical condenser units (each can operate separately) Quantity: 2 pieces available Price: Per piece Technical Specifications Motor: Voltage: 380-420V / 660-720V Speed: 1460 rpm Ncsbmjv Edh Rjy Ex Ipsu Power: 11 kW Quantity: 2 pieces Cooling System: Number of Condenser Units: 3 (independent operation) Cooling Type: Oil cooling Key Features ✅ High Cooling Capacity – Built for large industrial machines ✅ Independent Operation – Each condenser unit can function separately ✅ Versatile Applications – Can be adapted for different uses ✅ Durable & Heavy-Duty Design – Engineered for continuous operation ✅ Multiple Voltage Compatibility – Works with both 380-420V and 660-720V power sources Typical Applications Hea ...
CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 7.750 mm including transmission group, max diam. 3.000 mm.(exceptional transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle type, N.1 loading hopper with conveying screw ...
Nabertherm High Temperature Furnace 1600 °C The high-temperature furnaces HT 04/16 - HT 450/18 have proven themselves for many years in the laboratory and for production. Whether for quartz glass, glass-ceramics, the sintering of CIM components or other processes up to With a maximum temperature of 1800 °C, these furnaces represent the optimal solution for the sintering process. Thanks to their solid construction in a compact free-standing model, these high-temperature furnaces are suitable for processes in the laboratory where maximum precision is required. Excellent temperature uniformity and sensible details set unsurpassable quality standards. Tmax 1600 °C Double-walled housing construction with fan cooling, resulting in low outer wall temperature Heating from both sides via molybdenum disilicide heating elements High-quality fibre insulation with special rear i ...
maximum number of results exceeded
please refine your search
10 € 
