137,928 used machines on RESALE, but how to find them? Machine Search
Excenter screw pump Manufacturer: Netzsch Type: NM031BH01L06H N°: 303316 Built: 1999 speed-controlled Mobile Gearbox: Stöber Power: 1.5 kW very good condition LWH: 1400 x 380 x 1120 mm
Sell a high-quality, robust liquid ring vacuum pump from the premium manufacturer Siemen & Hinsch (SIHI Sterling) in excellent, visually and technically well-maintained condition. This LEMA 425 model is an absolute workhorse in industrial technology, known for its extreme reliability, durability and ability to convey even wet gases or vapours without any problems. The pump is single-stage and is directly driven by a powerful 11 kW electric motor. Technical data (according to nameplate): • Manufacturer: Siemen & Hinsch mbH (SIHI), Itzehoe Germany • Type: LEMA 425 AZ AA14B0 SB • Pumping speed : 270 m³/h • Speed : 1450 1/min • Suction pressure : 33 mbar • Overpressure : 0 bar • Engine power : 11 kW • Year of construction: 1995 • Pump No.: D-5078023 • Certification: CE marking
Pump Manufacturer: Lowara (Italy) Type: HTS 32-125 N°: 90 Power: 3 kW Flow rate: 12-33 m3/h at 26-18.8 m height (water) LWH: 600 x 300 x 360 mm
Centrifugal pump Manufacturer: CREPACO Type: R3R No.: 0-2182 speed-controlled Mobile with housing good condition Gearbox: Stöber LWH: 1050 x 500 x 480 mm
Centrifugal pump Manufacturer: Fristam Type: ET232 N°: 55059 Power: 11 kW Speed: 2910 rpm
Scheugenpflug DOS P016 Piston Feeder Piston dosing system DOS P for a wide range of requirements The piston dosing systems from Scheugenpflug work according to the principle of volumetric dosing, i.e. here the dosed amount of material is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material by feeding it through the corresponding material conveyor system. If a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dosing pistons simultaneously push the two components in separate channels towards the exhaust valve, where they only mix in the static mixing tube to form a homogeneous reactive medium. The Dos P016 / 050 / 100 / 300 / TCA piston dosing systems are high-precision volumetric dosing systems desig ...
Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, traction motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 425 307 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 1x pumps available -Price: per piece -Dimensions: 130/90/H120 mm -Weight: 3.4 kg/pc.
Excenter screw pump Manufacturer: Netzsch Type: NM031BH02512H N°: 322571 Built: 2001 Power: 1.5 kW LWH: 1200 x 230 x 520 mm speed-controlled various spare parts
Excenter screw pump Manufacturer: Netzsch Type: NM0453H02812H N°: 319224 Built: 2000 Power: 3.0 kW very good condition speed-controlled various spare parts LWH: 1800 x 500 x 600 mm
used
Rotary piston pump Manufacturer: Ledele GmbH Type: KRL65PN Built: 1998 Engine power: 2.2 kW Gearbox: Stöber speed-controlled Mobile very good condition LWH: 1200 x 600 x 620 mm
Fristam Centrifugal Pump FZ 27/A – Stainless Steel Food Pump – 40 m³/h NEW - never used before Manufacturer: Fristam Pumpen GmbH Type: FZ 27/A Year of manufacture: 2023 Condition: Very good / as good as new Application: Food, beverage, dairy, pharmaceutical and cosmetics industries For sale is a high-quality hygienic stainless steel centrifugal pump from Fristam. The pump is ideal for the gentle and reliable transport of liquid food and media in hygienic production environments. Technical data Make: Fristam Type: FZ 27/A Year of construction: 2023 Flow rate: up to 40 m³/h Lifting height: 32.5 m Speed: 1,450 rpm Material: Stainless Steel Hygienic design for food applications Robust industrial quality "Made in Germany" Pros ✔ Hygienic design for CIP cleaning ✔ High operational reliability and long service life ✔ Suitable for milk, be ...
For sale is a high-quality EDUR magnetic drive pump type LBM 602 C160L from 2021. The pump is in a well-maintained used condition and comes from an industrial plant. The EDUR LBM series is characterized by its hermetically sealed magnetic coupling and is suitable for demanding applications in process engineering, refrigeration, chemical and industrial technology. The multi-stage design achieves high conveying capacities and pressures. Technical data Manufacturer: EDUR Pumpenfabrik GmbH, Kiel Model: LBM 602 C1601 Year of construction: 2021 Factory No.: 461440 Flow rate (Q): 19.13 m³/h Lifting height (H): 13 m Permissible operating pressure: 25 bar Medium temperature: 20 °C Pump speed: 1450 rpm Weight pump: 83 kg CE marking available Engine Manufacturer: Lammers Power: 7.5 kW Voltage: 400/690 V Frequency: 50Hz Degree of protection: IP55 Effi ...
Vacuum pump, rotary vane pump, rotary vane vacuum pump -Manufacturer: Rietschle, rotary vane vacuum pump type KTA 80/1 (08) TN -Suction capacity: 80 m³/h -Pressure: 0.71 / -0.6 bar -Drive: CSM 4 kW / 1420 rpm -Dimensions: 840/420/H310 mm -Weight: 101 kg
High Pressure Pump Material: regular steel Driving force: 55 kW Dimensions: approx. L 1800 mm x W 1100 mm x H 900 mm Empty weight: 1500 kg Flow rate: 14.5 m3/h Technical documentation: no Message: piston: 57mm, stroke rate: 326 min
Hydraulic pump set Sauer-Sundstrand Model Code MPV 035D AABDDLA Type BAGRSGAA FFDNNN Model No. 4352025 A98-44-29352 with flanged gear pump made in UK
CONTROLS electronic controls ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz Like-new (1-year-old) high-pressure pump 69 bar
TECHNICAL INFORMATION Manufacturer: RITZ Pump Factory Name: Fresh water pump Built: 1998 Head: 120 m Pumping capacity: 180 cbm/h Speed: 1486 Ump Drive power: 90 kW If there is any interest, we are happy to send you an offer with photos. EuroConsult Dimitrios Piretzidis
Storage number: 3574 miscellaneous Manufacturer: GRUNDFOS , Type: CR2-60A-A-A-AUUE specifications: Rated Flow 2.5 m3/h Volt 380 Engine Power 0.75 Max pressure 16 bar/120 C Bar Pressure height 37.7 m Weight: 15 kg
Recon 994730 Built in 1994 1941/2200 l/min 400/450 L/min 10bar ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Leybold Turbovac TMP 600C with CF DN160 inlet flange.
Stock number: PC9241, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Motor: 1,5 kW - 400 Volt - 2900 rpm, Theoretical capacity: 5 l/h, Working temperature: -10 - +140° C, Working pressure - Inlet: 5 Bar, Dimensions - Inlet: Ø 2, Dimensions - Outlet: Ø 2
Manufacturer Düchting Type centrifugal pump LHK 125x5 Unused / Refurbished Flow rate 180 m3/h Head 150m Step number 5 Weight approx. 550kg Special price
Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Capacity: 3000 l/min -Pump length: 970 mm -Flange outer diameter: 245 mm -Flange inner diameter: 125 mm -Pump diameter: 210 mm -Weight: 180 kg
ThyssenKruppHPD 4037-OEM20214000 bar3.8 l/min19 mm37 kW1980 kgused, low operating hours per seller
minimum range for wine: 15,000 litres/hour
Both the standard version and the tandem version are available. Manufacturer: DOPAG Dosiertechnik und Pneumatik AG Product Type: Pneumatic Drum Pump / Material Transfer Pump Series: P200 Version 1: Drum pump P200 2H Version 2: Drum pump P200 2H tandem Operating concept: 2-hand version Drive: Pneumatic Compressed air supply: 6 bar Maximum container size: 200 l Maximum container height: 880 mm Year of manufacture: 11/2018 Weight P200 2H: 386 kg Weight P200 2H Tandem: 394 kg Material feed: Directly from the original container Pump principle: piston pump Compressed air treatment: Festo SMC Valve Type: VSA4244-00-1 The DOPAG P200 systems are designed for the conveying of highly viscous materials from 200-litre containers, e.g. adhesives, sealants or lubricants. Depending on the specific pump configuration, different flow rates, gear ratios and material ranges are possibl ...
Excenter screw pump Manufacturer: Mono (England) Model: SSLX2MS1R5/H243 Built: 2001 (?) N°: C092782/01 max. pressure: 5 bar Speed: 220 rpm speed-controlled with control cabinet on mobile car LWH: 1700 x 600 x 500 mm
Excenter screw pump Manufacturer: Mono (England) Model: SSL22MS1R5/H243 N°: C184784/01 Built: 2004 Pressure: 7 bar Speed: 171 rpm with control cabinet on mobile car very good condition speed-controlled LWH: 1300 x 550 x 1200 mm
Process pump Manufacturer: Maso Sundyne Corporation Type: Plc-4" N°: 89700602 very good condition with lid LWH: 1500 x 400 x 560 mm
Screw spindle pump Manufacturer: Wangen GmbH Type: Train 104.53-1 N°: P951403 Built: 2018 new condition various spare parts with original operating instructions (incl. CD-Rom) and documentation Engine power: 5.5 kW Weight of engine: 119 kg LWH: 1300 x 450 x 320 mm
Excenter screw pump Manufacturer: Netzsch Type: NM053BH02S12H Item #: 330886 Year of construction: 2001 Power: 3.0 kW Speed: 1400 rpm very good condition with spare parts LWH: 1800 x 270 x 300 mm
Processing pump Manufacturer: Maso Sine Pump Type: SPS-4" No°: 31260692 good condition Power: 11 kW Speed: 1450 rpm LWH: 1500 x 700 x 700 mm
Processing pump Manufacture: Maso Sundyne Corp. Type: PLC-2.5" Item #: 101920104 Power: 1.1 kW Speed: 1410 rpm LWH: 1100 x 300 x 430 mm
Processing pump Type: PLC-2.5" Item #: 105670604 Manufacturer: Maso Sundyne Corp. very good condition LWH: 1100 x 400 x 550 mm
Excenter screw pump Manufacturer: Netzsch Type: NMNL50871184 Power: 2.2 kW with spare parts very good condition LWH: 2000 x 500 x 400 mm
Excenter screw pumps Manufacturer: Netzsch Type: 1) NM NE 40A - 595 376 2) NM NE 40A - 869 334 Power: 3.7 kW / 4.4 kW speed-controlled Speed: 1420/2860 rpm very good condition LWH: 2000 x 400 x 450 mm two items in stock
Processing pump Manufacturer: Maso Sine Pump Type: SPS-3" No°: 61210497 speed-controlled good condition with cover LWH: 1600 x 700 x 520 mm
centrifugal pump Power: approx. 2 kW very good condition standing on feet LWH: 500 x 250 x 410 mm
vacuum pump Manufacturer: Rieetschle Type: TR 40 V (91) Year of construction: 1988 Pumping speed: 45 m³/h (water) very good condition with vacuum regulator valve three items in stock with operating instructions LWH: 500 x 350 x 500 mm
Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KRP50/832107/6286 Year of construction: 1988 Power: 3.8 kW LWH: 440 x 270 x 400 mm
maximum number of results exceeded
please refine your search
10 € 
