137,081 used machines on RESALE, but how to find them? Machine Search
A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible.
T65 Digital Ultra Turrax Currency: MYR PIC: - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my
Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton
Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton
Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7
Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5
Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton
Polar 115 ED AT Autotrim Optionally available Jogger RA-4 Year 2007 Lift LW 1000-4 Year 1999 Transomat TR 130-EL-4 Year 2001
Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Table clamping surface: 600 x 1800 mm Height adjustment of the boom: 450 mm small/large drilling radius: 305/1305 mm Spindle holder: SK 40 Quill stroke: 200 mm Spindle speeds infinitely variable: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency-controlled: 5.5 kW electr. Connection: 400 V, 14 kVA Weight: 3400 kg Space requirement: 3800 x 2000 x 2500 mm
x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm c-axis: 360 ° b-axis: +10 / -110 ° control: Heidenhain iTNC 530 : : 42000 min/-1 : 20 / 15 kW table surface area: dia 750 mm max. table load: 800 kg : : 30 pos. tool taper: HSK E 50 feeds:: feed speeds: max. 90.000 mm/min rapid traverse: 90 m/min total power requirement: 73 kVA weight of the machine ca.: 11 t dimensions of the machine ca.: 3,3 x 2,9 x 3,1 m High dynamic 5-Axis-Precision Center equipped with: - CNC ControlHeidenhein iTNC 530 - ATC 30-fold (HSK E50) - Chip Conveyor approx 57000H working hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
There is a Baumann Perfecta 115 high-speed cutter with Baumann Perfecta BSB 3L jogger, Schneider SENATOR unloader and Schneider SENATOR pile hoist available. 1) Baumann Perfecta 115 high-speed cutter, working height: 900mm, cutting width: 1150mm, insertion depth: 1150mm, max. layer height: 165mm, residual cut: 20mm, residual cut without cover plate: 77mm, weight: 3.2t, year of manufacture: 2022, 2) Baumann Perfecta BSB 3L jogger, load capacity: 1500N, connected load: 2.5kVA, year of manufacture: 2022, 3) Schneider SENATOR unloader, load capacity: 1t, lifting height: 900mm, year of manufacture: 1990, 4) Schneider SENATOR pile hoist, year of manufacture: 2022. An on-site inspection is possible.
Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 kN (20 T). Speed range: 100 – 1800 spm. Year of manufacture: 1996. Hours under power: 51574. Feed BBV 101/75 on the left-hand side. Max. strip width: 125 mm. Max. feed pitch: 85 mm. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm. Ram height adjustment: 51 mm. Dimensions of the clamping plate: 510 x 400 mm. Bed opening: 400 x 160 mm. Max. distance of the mold width between the columns: 410 mm. Max. strip passage width: 260 mm. Connected load: 51 kVA. Power 400 V 50 Hz. Control voltage: 24 V. Machine dimensions: H 2540 x W 1661 x D 855 mm. Machine weight: approx. 3100 kg. Control cabinet and control system. Including all original technical documentation. Machine is now under power. Sound cabin sold separately, not included in machine price.
This high-speed precision stamping press, manufactured in 1987, delivers a maximum pressing force of 80 tons (800 kN) and is designed for demanding progressive-tool applications. With an operating range of 100–1000 strokes per minute, it combines high productivity with exceptional process stability. The machine features adjustable stroke lengths from 16 to 63 mm, a ram adjustment of 76 mm, and supports tools up to 970 mm width. A Bruderer BBV 202/120 strip feeder is included, allowing strip widths up to 202 mm and feed pitches up to 120 mm, ensuring precise material handling. The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners. Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 – 1000 SPM Main voltage: 40 ...
Pallet racking, as good as new 108 pitches - Multiple sites. Manufacturer: Jungheinrich Type: B Technical data: 10 stand frames, approx. 4,250 x 1,100 mm 36 supports, approx. 3,600 x K125 mm 72 locking pins The shelf load is 1,600 kg (with an evenly distributed load). 2.773,11 € net plus 19 % VAT from stock 21698 Harsefeld. Subject to changes and errors. We are a professional provider – invoice with VAT indicated.
High-speed mixers Manufacturer: Henschel Type FM-4 Serial No. 80 5002 Double jacket for heating and cooling Total capacity 4 liters Working capacity 3 liters
Offer 26144 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity up to 45 mm - Tapping device up to M 36 - Feeds infinitely adjustable - Drilling spindle holder MK 4 - Drilling spindle stroke programmable up to 175 mm - Drilling spindle speeds infinitely variable 30 - 2400 rpm - Projection 300 mm - Table with 2 T-slots 600 x 500 mm - Height adjustable via rack with hand crank - min. - max. distance table - drilling spindle 70 - 830 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 600 x H 1980 x D 950 mm - Weight approx. 500 kg
Description WE OFFER AN HIGH TECH CNC LATHE TURNING AND MILLING CENTRE MACHINE IS COMMING OUT FROM FORMULA 1 - MERCEDES WORKSHOP MACHINE WAS FROM NEW HIGEST POSSIBLLE MAINTAINED WITH OFFICAL MORI SEIKI TECHNICAL DATA: Mori Seiki MT2000 CNC Lathe Description: Swing over bed - 700mm, Distance between centres - 1080mm, Max turning dia meter - 550mm, Max turning length - 1020mm, Bar capacity - 65mm, X Travel - 565mm, Y Travel - +/-80mm, Z Travel - 1077mm, B Indexing - +/-120deg, X Travel Turret 2 - 155mm, Z Travel Turret 2 - 1067mm, Spindle Speed - 4500rpm, Spindle nose - JIS A2-6, Tool Spindle Speed - 6000rpm, Tool Spindle type - Capto C6, ATC - 40 Tools, Max tool length - 280mm, Max tool weight - 7kg, Turret 2 Tools - 12, Square shank - 25mm, Boring bar shank diameter - 40mm, ...
Klopp 1000 Quick Planer Total width: 150 cm Overall length: 3,330 cm Total height: 170 cm Planing width: 750 mm Working length: 1000 mm Table width: 900 mm
Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Hydraulic clamping -Documentation Dimensions: Hjbkn Asvw D Smeu S Tol LxWxH 2x1.7x1.9 meters / Weight 1900Kg
This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Press force 800 kN Speed: 60 - 320 SPM Adjustable stroke 8–80 ...
taper MK: 3 feed:: 4 Stufen : 2580 x-travel: 2500 mm throat: 1000 mm : 1000/2800 mm weight: 3,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Polar 92 E Year of Make: 2000 E version, air table, 2x side tables Formica large, Spare blade. Immediately available!
Polar 66 E Year of Make: 2007 E Version Spare blade Very good condition - little used! Immediately available
taper MK: 3 serial number: 4131 throat: 1000 mm documentation: ja clamping: hydraulisch kW weight of the machine ca.: 2,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The Bruderer BSTA 80H is an 80-ton high-speed stamping press built for heavy-duty progressive-die production, fitted with a BBV 320/200 strip feeder and Unidor tool monitoring. In stock in Pforzheim, ready for inspection. Nominal force: 800 kN (80 tons) Tool monitoring: Unidor Stroke rate: 100–1,000 spm Strip feeder: Bruderer BBV 320/200 Adjustable stroke: 16–63 mm Clamping plate area: 970 mm Main drive: 43 kW Power supply: 380 V / 50 Hz Ram area: 760 x 510 mm Table area: 950 x 910 mm Strip inlet height (adjustable): 80–180 mm Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: approx. 15,550 kg Operating hours (main drive): approx. 28,067 h More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on request
The BSTA 50UL is a Bruderer high-speed precision stamping press rated at 500 kN (50 tons) nominal force, engineered for continuous progressive-die production at variable stroke rates from 100 to 1,120 strokes per minute. The press is equipped with a Bruderer BBV 202/120 strip feeder, delivering strip widths up to 203 mm and handling material thicknesses up to 2 mm. Adjustable stroke is set between 16 and 51 mm, with strip inlet height adjustable across a 50–140 mm range to accommodate varying tooling and material profiles. Nominal force: 500 kN (50 tons) Tool monitoring: Unidor Stroke rate: 100–1120 strokes per minute (variable) Strip feeder: Bruderer BBV 202/120 Adjustable stroke: 16–51 mm Mounting space / clamping plate: 760–940 mm Main drive: 22 kW Power supply: 400 V / 50 Hz Table area: 940 x 580 mm Strip inlet height (adjustable): 50–140 mm Max. strip width: 2 ...
x-travel: 1050 mm y-travel: 800 mm z-travel: 560 mm Control: HEIDENHAIN iTNC 530 Tools changer: 30 pos. table-size: 950 mm turning speeds: 28000 U/min output: 55/43,5 kw taper: HSK A 63 a-axis: -10º/+110º ° c-axis: 360 ° Internal cooling system: 10 - 80 bar table load: 800 kg total power requirement: 80 kVA Total weight, approx.: 13 t dimensions of the machine ca.: 3,6 x 3,8 x 3,18 m 5-axis machining centre DMG-MORI HSC 105 linear - CNC control Heidenhain TNC 530 - Tool changer 30-fold (HSK A63) - NC rotary table 2606h Spindle Hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z42000/42000/42000 mm/minRapid feed X / Y / Z42/42/42 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftDynamic package for DMF 300|11 linearDynamic package for DMF 300|11 linear Linear motor X-axis with 80 m/min // 262.48 ft/min Rapid speed XYZ 80 m/min // 262.48 ft/min Acceleration XYZ 8 m/s² // 26.25 ft/s² Active cooling for Linear motorToolchanger with twin-grippertoolchanger with twin-gripperType of magazine ChainNumber of tools 40CabineFull protection cabinPackage Mill / Turn 20,000 rpm, H ...
bore capacity in steel (diameter): 40 mm arm length: 1050 mm workpiece height max.: - mm turning speeds: 15 - 2800 U/min feed range: 0,075 - 0,45 mm/min dimensions: 2450 x 1300 x 2300 mm Weight: 1500 kg Control: Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T- ...
x-travel: 600 mm y-travel: 450 mm z-travel: 300 mm CNC-control: Roeders RMS6 table-size: 700 x 550 mm max. table load: 800 kg spindle taper ISO: spindle turning speed range: 42.000 U/min feed stepless: 0 - 30.000 mm/min rapid traverse: 30 m/min drive capacity - spindle motor: 14 kW tool change unit: Pick-up 18 Pos. voltage: 400 V total power requirement: 20 kVA weight of the machine ca.: 5,2 t dimensions of the machine ca.: 3,00 x 2,30 x 2,70 m - Serial No.: 88231-83 - HSC spindle Fischer MFW1230/42 - Dust extraction system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ESSA BH 15 ist eine Schnellläufer Presse, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Druck 15 to; Geschwindigkeit 200–500 c/min; Tisch L320×B250×D60 mm; Durchbruch L250×B140 mm; Schnittfläche 300 mm²; Stösselhub 24 mm, Verstellung 60 mm; Durchgang L320×seitl170 mm; max Abstand Tisch-Nase 211 mm. Technische Daten: Anschluss 3×380 V 50 Hz, Leistung 4 CV, Gewicht ~1800 kg, Abmessungen L1350×B850×H1950 mm. Zubehör: 2 Vorschubapparate (Walzen) Hub max 100 mm, Bandrichtgerät. Einsatz: enge Toleranzen, Automobile, Uhrenbau, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr
ESSA PLA 30 ist eine Schnellläufer Presse, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Druck: 30 to; bis 900 c/min; Stösselhub 10 mm; Stösselbohrung 38 mm; längs 455 mm; Tisch 425×350 mm; Durchmesser 85 mm. Anschluss 50 Hz 3x:380 V; Leistung 6 kW; Maschinengewicht ca.1950 kg; Abmessungen L1500×B1000×H2000 mm. Vorschubapparat: 1; Walzen; elektropneumatische Kupplung; Sicherheitsvorrichtung. Gewährleistet enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugmaschinenbau, Luft- und Raumfahrt, Medizintechnik Technische Daten ohne Gewähr
ESSA PLA 30 ist eine Schnellläufer Presse, ausgelegt für Präzisionsbearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Arbeitsfähigkeiten: Druck 30 t; stufenlose Hubzahl bis 900 c/min; Tisch 425×350 mm; Durchmesser 85 mm; Stösselhub 10 mm; Stösselbohrung 38 mm; Längsweg zwischen Ständern 455 mm. Technische Daten: Anschluss 3x 380 V 50 Hz; Leistung 6 kW; Maschinengewicht ca. 1950 kg; Abmessungen 1500×1000×2000 mm. Zubehör: elektropneumatische Kupplung, Sicherheitsvorrichtung. Erreicht enge Toleranzen; Anwendungsbereiche: Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr
HASEGAWA PM 150-01 is a CNC Hochgeschwindigkeits-Fräsmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsraum: Tisch 300×260 mm, Verfahrwege X150 / Y225+50 ATC / Z200 mm, Tischlast 80 kg, Spindel–Tisch 140–340 mm. Technische Daten: HSK-E32, Spindeldrehzahl 100–30.000 t/min (stufenlos), Spindel 3.0/4.5 kW, Eilgang 30 m/min, Anschlussleistung 12 kVA, Abmessungen 1750×600×1800 mm, Gewicht ~2000 kg. Ausstattung: Werkzeugwechsler 17 Plätze, BLUM Z-Pico Werkzeugvermessung, Kühlmitteleinrichtung 120 L, elektronisches Handrad, Komplettspritzschutz, Schnittstellen Flash/USB/Ethernet, Spindelkühlung, Zustandsleuchte. Erreicht enge Toleranzen; Einsatz in Automotive, Uhrmacherei, Werkzeugbau, Luftfahrt, Medizin. Technische Daten ohne Gewähr
HASEGAWA PM 150-01 ist eine CNC Hochgeschwindigkeits Fräsmaschine, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsmaße: Tisch 300×260 mm; Wege X 150 mm, Y 225+50 ATC mm, Z 200 mm; max. Werkstückgewicht 80 kg; Spindel-Tisch Abstand 140–340 mm. Technische Daten: HSK-E32; Drehzahl 100–30000 t/min (stufenlos); Spindelmotor 3.0/4.5 kW; Eilgang 30 m/min; Gesamtleistung 12 kVA; Gewicht ~2000 kg; Abmessungen L1750×B600×H1800 mm. Zubehör: Werkzeugwechsler 17 Plätze, automatische Werkzeugvermessung BLUM Z-Pico, elektronisches Handrad, komplette Spritzschutzkabine, Kühlanlage 120 l, Schnittstellen Flash/USB/Ethernet, RS-232C. Erreicht enge Toleranzen; geeignet für Automotive, Uhrmacherei, Maschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr
HASEGAWA PM 250 ist eine CNC-Hochgeschwindigkeits-Fräsmaschine für Präzisionsbearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Kapazitäten: Tisch 300×260 mm; Wege X100 Y225 Z200 mm; max. Werkstückgewicht 80 kg; Spindel-Tisch 140–340 mm. Daten: 100–30000 t/min; SK32; Eilgang 30 m/min; Spindelmotor 3,0/4,5 kW; 3x400 V 50 Hz; 12 kVA; Gewicht ~2000 kg; Abmessungen 1750×600×1800 mm. Zubehör: Taster Renishaw, Satz Werkzeughalter, Kühlmittelsystem 120 l, Ölnebelabsaugung Mebaron, Werkzeugbruchkontrolle, Zustandsleuchte. Erreicht enge Toleranzen; Einsatz: Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt, Medizin. Technische Daten ohne Gewähr
Silverson EX High shear mixer on stand Stainless high shear mixer on stand, 3Kw, 750mm shaft length, high shear diameter 105mm, 3Ph
Offer 26252 Technical data: - Drilling capacity into solid steel ST 60 22 mm - Drilling capacity GG 25 32 mm - Threading ST 60 M 20 - Threading GG 25 M 24 - Drilling spindle holder MK 4 - Quill stroke 140 mm - 18 drilling spindle speeds 60 - 3050 rpm - Drill feeds infinitely variable 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max 420 / 1320 mm - Swivel angle 320 ° - Table size 1200 x 600 mm - Table height 905 mm - mot. Height adjustment / stroke of the drilling column 430 mm - hydr. Columns + Boom Clamp - T – Vertical grooves on the left side of the machine - Coolant device - Drive 400 V / 1.1 / 1.6 kW - Space requirement approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight approx. 1800 kg
Offer 26231 Technical data: - Drilling capacity in steel St 60 45 mm - Drilling capacity in steel St 60 55 mm - Drilling spindle holder long spindle MK 4 - Drilling spindle speeds AZ gearbox infinitely variable in 2 speed series - 40 - 760 rpm - Drilling spindle stroke 140 mm - Projection 300 mm - Column diameter 145 mm - Table with 2 T-slots 460 x 420 mm - Distance table-drilling spindle min / max 35 / 640 mm - Drill spindle – machined base plate approx. 1150 mm - 3 feeds 0.10 - 0.20 mm/rev - Drive 400 V / 1.8 / 2.9 kW - Keyless chuck - Machine vise - Space requirement approx. W 600 x H 1800 x D 950 mm - Weight approx. 380 kg
Offer 26231 Technical data: - Drilling capacity in steel St 60 45 mm - Drilling capacity in steel St 60 55 mm - Drilling spindle holder long spindle MK 4 - Drilling spindle speeds AZ gearbox infinitely variable in 2 speed series - 40 - 760 rpm - Drilling spindle stroke 140 mm - Projection 300 mm - Column diameter 145 mm - Table with 2 T-slots 460 x 420 mm - Distance table-drilling spindle min / max 35 / 640 mm - Drill spindle – machined base plate approx. 1150 mm - 3 feeds 0.10 - 0.20 mm/rev - Drive 400 V / 1.8 / 2.9 kW - Keyless chuck - Machine vise - Space requirement approx. W 600 x H 1800 x D 950 mm - Weight approx. 380 kg
Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Unwinding reel / coil reel Soundproof cabin Conveyor belt for part removal Lifting and sorting device for containers Roller conveyors and stacking racks Technical documentation available Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available. Technical Specifications Stroke Power 500 kN (50T) Table area: 940 x 580 mm Tool length max. 950 mm Operating hours 49637 Strip width: Max. 202 mm Machine dimensions: 3100 x 2700 x 1800 m ...
Röders RFM 600 Hochgeschwindigkeitsfräsmaschine Hersteller: Röders Typ: RFM 600 Baujahr: 2000 Zustand: gebrauch, unter Strom, Steuerung auf Windows 7 NEU x-Weg 600 mm y-Weg 500 mm z-Weg 300 mm Steuerung RÖDERS RMS 6 3.60 Spindelaufnahme HSK E 40 Spindeldrehzahlen 42.000 U/min Werkzeugwechseleinrichtung 18-fach Tischgröße 700×;500 mm Werkstückgewicht 800 kg Antrieb 14 kW Gesamtleistungsbedarf kW Maschinengewicht ca. 5,2 t Raumbedarf ca. 3,2×;2,25×;2,65 m Röders Jobmanager (zum Bearbeiten mehrerer Werkstücke nacheinander) Antastprogramme für nahezu alle gängigen Geometrien Extor Absauganlage für Staubende Zerspanung Minimalschmierung Bettbahngebläse Blum Messlaser (für die Werkzeugvermessung Länge + Durchmesser + Kontur und Bruchkontrolle ) Werkzeugreinigung (Luft) Kühlaggregat für Spindel und Schaltschränke Dokumentation
Weiler Praktikant VC Präzisionsdrehmaschine Hersteller: Weiler Typ: Weiler Praktikant VC Präzisionsdrehmaschine Baujahr: 2002 Zustand: gebraucht, sehr gut, gewartet und geprüft mit Prüfprotokoll nach Werksvorgaben von Weiler. Technische Details. Drehdurchmesser 250 mm Drehlänge 650 mm Spitzenhöhe 160 mm. Umlaufdurchmesser über Bettschlitten 320 mm Umlaufdurchmesser max. über Planschieber 190 mm Hauptspindel: Drehzahlbereich ? Hauptspindel 30 ? 4.000 min/-1 Antriebsleistung ? Hauptspindel 10 / 6,0 kW Getriebestufen 1 Spindelkopf. 5 / DIN 55027 Spindeldurchmesser im vord. Lager 70 mm Spindelbohrung 40 mm Nutzbarer Stangendurchmesser 40 mm Reitstock.: Pinolenhub 85 mm Pinolendurchmesser 40 mm Reitstockaufnahme MK 3 Vorschübe: Anzahl der Vorschübe 24. Längsvorschub 0,02 ? 0,63 mm/-1 Planvorschub 0,006 ? 0,2 mm/-1 Gewindeschneiden: metrisch 0,25 ? 8 mm ...
Weiler Praktikant VCD Präsizions Drehmaschine (2021) Hersteller: Weiler Typ: Praktikant VCD Präsizions Drehmaschine Baujahr: 2021 Zustand: gebraucht, sehr gut, neuwertig, inkl. neue Wartung und Vermessungsprotokoll vor Verkauf. Spitzenweite 650 mm Spitzenhöhe 160 mm. Umlaufdurchmesser über Bett 320 mm Umlaufdurchmesser über Planschieber 190 mm Verschiebeweg des Planschiebers 150 mm. Verschiebeweg des Obersupports 110 mm Schwenkbereich Obersupport +/-65 ° Führungslänge des Bettschlittens 350 mm Bettbreite 205 mm Drehmeisselquerschnitt (Höhe x Breite) 20 x 20 mm Höhe vom Oberschlitten bis Drehmitte 30 mm Spindelkopf nach ISO DIN 702-3 (DIN55027) Grösse 5 Spindeldurchmesser im vorderen Lager 70 mm Spindelbohrung 43 mm Innenkegel der Hauptspindel Metrisch 50 Antriebsleistung 6 kW. Drehzahlbereich 30 ? 4000 U/min Anzahl der Getriebestufen 1 Anzahl der Drehzah ...
Schaal SEP 80 SZV 302 Automatic Punching Press Machine • 2001 • ID: 34126 Frame and guidance on this unit are built for repeatability: a rigid double-column O-frame in vibration-damping cast iron, with the ram carried in 6-point play-free roller guides. Power is transmitted by a flywheel drive with pneumatic clutch/brake combination. Year of manufacture is 2001. Control and protection - Unidor electronic control system giving repeatable stroke accuracy and fast setup; integrated tool safety device protecting dies from damage caused by misfeeds or incorrect part positioning, which reduces downtime and tooling costs. Key data - pressing force 800 kN (80 tons); 60 – 320 min⁻¹; ram stroke adjustable 8 – 80 mm; ram adjustment 80 mm; ram surface 700 × 500 mm; clamping plate 830 × 700 mm at 80 mm thickness; table opening 500 × 200 mm; strip feed clearance 120 ± 40 mm; drive po ...
Weiler Praktikant VCD Präsizions Drehmaschine (2013) Hersteller: Weiler Typ: Praktikant VCD Präsizions Drehmaschine Baujahr: 2013 Zustand: gebraucht, sehr gut, neuwertig, keine Gebrauchspuren, inkl. neue Wartung und Vermessungsprotokoll vor Verkauf. Spitzenweite 650 mm Spitzenhöhe 160 mm. Umlaufdurchmesser über Bett 320 mm Umlaufdurchmesser über Planschieber 190 mm Verschiebeweg des Planschiebers 150 mm. Verschiebeweg des Obersupports 110 mm Schwenkbereich Obersupport +/-65 ° Führungslänge des Bettschlittens 350 mm Bettbreite 205 mm Drehmeisselquerschnitt (Höhe x Breite) 20 x 20 mm Höhe vom Oberschlitten bis Drehmitte 30 mm Spindelkopf nach ISO DIN 702-3 (DIN55027) Grösse 5 Spindeldurchmesser im vorderen Lager 70 mm Spindelbohrung 43 mm Innenkegel der Hauptspindel Metrisch 50 Antriebsleistung 6 kW. Drehzahlbereich 30 ? 4000 U/min Anzahl der Getriebestufen ...
Donau Flex 135 Schnellradialbohrmaschine Hersteller: Donau Typ: Flex 135 Schnellradialbohrmaschine Zustand: gebraucht, sehr gut bis neuwertig Baujahr 2020 Stufenlose Drehzahleinstellung Stufenloser Pinolenvorschub Gewindeschneideinrichtung Abmessungen und Verfahrwege Werkzeugaufnahme MK 4 Säulendurchmesser mm 170 Tischabmessung mm 1200 x 600 Anzahl der T-Nuten 4 Abstand der T-Nuten mm 125 Pinolenhub mm 165 Säulenhub mm 450 Bohrleistung ins Volle St 60 mm 35 GG 22 mm 42 Gewindeschneiden St 60 M 30 GG 22 M 36 AC-Motor, frequenzgesteuert kW 4,0 bei 100 % ED. Drehzahlbereich: min -1 20 ? 3200 Vorschub stufenlos mm/U. 0,02 ? 0,7 Maschinenleuchte Spindelschutz
MIKRON XSM 400 is a CNC Hochgeschwindigkeits Fräsmaschine, ausgelegt für hochpräzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Verfahrwege X 400 mm, Y 450 mm, Z 350 mm; max. Werkstückgewicht auf dem Tisch 100 kg; Paletten EROWA 320x320 mm, Anzahl Paletten 7; Werkzeugmagazin 68 Plätze. Spindelaufnahme HSK E 40 bis 42000 t/min; Frässpindelmotor 14 kW; Anschluss 50 Hz 3x 400 V; Maschinengewicht ca. 6500 kg; Abmessungen ca. 4000x4000 mm. Zubehör: Späneförderer; Kühlmitteleinrichtung; Kühlnebelsprüheinrichtung; Papierfilteranlage; Beleuchtung; Kühlmittel-/Nebelabsaugung; Palettenwechseleinrichtung; Zustandsleuchte. Geeignet für enge Toleranzen in Branchen wie Automobil, Uhrmacherei, Werkzeugbau, Luft- und Raumfahrt und Medizintechnik. Technische Daten ohne Gewähr
STUDER internal grinding spindle – 40,000 rpm with accessories High-speed spindle for internal grinding STUDER is for sale, in excellent condition and properly stored in its original wooden protection box. Key features: - Type: 102540B - Maximum speed: 40,000 rpm - Compatibility: Studer S30, S40, S31, Favorit, etc. - Application: Internal grinding - High-precision construction. - Includes wheel holders/accessories and tools shown in the photographs. - Includes documentation and instructions. - Wooden box for storage and transport. Ideal as a replacement for STUDER grinding machines, for replacing an existing spindle or for repair projects. The set is delivered with the available accessories shown in the photographs, offering a particularly interesting solution for grinding workshops that need hard-to-find STUDER original equipment. National and inter ...
maximum number of results exceeded
please refine your search
