126,706 used machines on RESALE, but how to find them? Machine Search
Various compressors are offered, including those from the company Bock, used. The equipment is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are understood as net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take them back. The offers are subject to change, subject to error and subject to a possible intermediate sale. Our terms and conditions also apply to every sale, to which we expressly refer
Compressor multiple D2. HV3. 5.5 750. HM ( D2. HV3.5,5750.HM ) Bj: 1988 Delivery pressure: 16 bar litre capacity: 2 x 585 l/min Boiler capacity: 750 l Operating voltage: 380 V Power: 2 x 5.5 kW used, tested ! Dimensions: 3000 x 900 x 1650 mm Weight: 940 kg
feed pressure:13 bar total power requirement:3 kW weight of the machine ca.:0,15 t dimensions of the machine ca.:1,0 x 0,8 x 1,2 m High pressure air cooling device
Compressor with tank ALUP HL5000-z10/2M 10 bar 276 m3/h Operating hours: 17854 Tank: 2500 l 2 ALUP single compressors HL 3050-Z488 Motor: 2 x 15 kW used, tested ! Dimensions: 3500 x 1200 x 1900 mm
Compressor spare part KAESER AFVM 18 ( AFVM18 ) 893358.00010 450 bar Dimensions: 200 x 250 x 170 mm
power capacity:2x 5,5 kW feed pressure:16 bar liter capacity:2 x 585 l /min Receiver capacity:750 l total power requirement:380 V,50 Hz,11,2A, 2x5,5 kW weight of the machine ca.:940 kg dimensions of the machine ca.:3000 x 900 x 1650 mm
feed pressure:8 bar :9 m³/min Number of working hours:18671 h voltage:380 - 415 V total power requirement:58,5 kW weight of the machine ca.:1300 kg dimensions of the machine ca.:2000 x 1100 x 1700 mm
Compressor, Screw Compressor ATMOS SE 440 ( SE440 ) Year: 2005 Operating hours: 9299 Final compression pressure: 8 bar Flow rate: 7.4 m3/min 46.5 kW 400 V used, tested, top condition ! Dimensions: 1800 x 1600 x 2300 mm
Compressor, small compressor DEVILBISS NCL-501 P max: 2.76 bar motor: 0.42 kW 220 V used, tested ! Dimensions: 320 x 230 x 420 mm
feed pressure:8 bar :Verd. 5050 min /1 voltage:400 V rated current:90 A total power requirement:46,5 kW weight of the machine ca.:1320 t dimensions of the machine ca.:1800 x 1600 x 2300 mm frequency:50 Hz Effizienz::7,4 m3/min IP::54 / 20
feed pressure:8 bar :Verd. 5050 min /1 voltage:400 V rated current:90 A total power requirement:46,5 kW weight of the machine ca.:1320 t dimensions of the machine ca.:1800 x 1600 x 2300 mm frequency:50 Hz Effizienz::7,4 m3/min IP::54 / 20
Compressor, Screw Compressor ATMOS SE 440 ( SE440 ) Year: 2005 Operating hours: 3735 Final compression pressure: 8 bar Flow rate: 7.4 m3/min 46.5 kW 400 V used, tested, top condition ! Dimensions: 1800 x 1600 x 2300 mm
power capacity:110 kW feed pressure:10 bar Number of working hours:11 372 / Lastst. 7436 h volume capacity:16,75 m³/min total power requirement:110 kW weight of the machine ca.:2,3 t dimensions of the machine ca.:2400 x 1630 x1820 mm
Refrigeration compressor, compressor for medium temperature range MANEUROP MT 125 HU 6D ( MT125HU6D ) I max: 43 A 220 V 3AC approx. 2.2 m connection cable used, tested ! Dimensions: 400 x 400 x 600 mm
Compressor RIETSCHLE DFT 500 (22) ( DFT500(22) ) Article no.: 102109-2224 500 m3/h 0.9 bar motor: 22 kW 380 / 660 V used, tested ! Dimensions: 1520 x 1050 x 1300 mm
Oil tank for compressor system ALUP / BWB 228 00249 ( 22800249 ) SPH265HH Bj.; 1997 used, tested ! Dimensions: 1800 x 900 x 1650 mm
2019 Aerzen D52S Rotary piston compressor Find more here - / Contact us at -
Key data: 11 , 1 , 250
Claw compressor Gardner Denver ( Elmo Rietschle ) C-DLR-250, UNUSED. Capacity 250 m3 / hour; 11 kW; EX motor; maximum pressure 1,8 bar; 2950 round per minute; Dimensions L 1450mm, H 1100mm, W 950mm Electric connection 400 V
CECCATO CSM 5.5 X mini screw compressor Power 4kw Working pressure 10bar Capacity approx. 470l/min Noise level 62dB Dedicated dehumidifier Air tank 270l
Key data: 75 , 13 , 15
Screw compressor, 500 V drive, was serviced by Atlas Copco in 2020 and has been out of service since then. Accessories (absorption dryer, refrigeration dryer, oil/condensate separator) available for an extra charge.
Key data: 73 , 3
Screw compressor, 500 V drive, serviced
Height 1230 mm Width 980 mm Length 1330 mm Weight 820 kg Power supply: 400V 50Hz 3N Total power 31.1 kW Description Screw compressor Atmos SE 270, 400 V, 31.1 kW 8 bar 4.47 m3/min
Kaeser compressed air tank 3000 liters approx. 3 meters high
- Year: 2007 - Engine: 15 hp (11 kW) - Maximum pressure: 7.3 bar
Key data: 160 , 8 , 1170
For sale is an Atlas Copco compressor 160KW Ser. No. AIF001037
Key data: 250 , 8 , 2322
For sale is an Atlas Copco ZR4 compressor Year of manufacture 1993 Bh. 98485 250KW Volume 1400-2322 m3/h Weight 4100kg
4x CSW8593-125Y-40P screw compressors, two of which served as replacements, so NEW and not yet in use.
Sullar Screw Compressor Volume Flow 6.29 cbm Operating hours 31690 Motor power 45kw
Sell several CO2 compressors, in good working order. Make bid for the lot
A very clean and working vacuum compressor. 2m3 per hour, 0,85 bar. One faze 220 V. Can ship worldwide.
Motor power 11kW/ max. ultimate pressure 13bar Regular maintenance
Engine power 11 kW / max. final pressure 13bar Regular maintenance Engine should be replaced promptly
Compressor, compressor two-stage type S6H-20.2Y, displacement 73 m3/h For blast freezers or deep freezes. Needed two pcs., checked in stock.
serial number: 2313 control: SAM 8/4 rated current: 0,7 - 0,35 A frequency: 60 Hz : 100-240 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
serial number: 711- 00 37 48 total power requirement: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Power: 7,5 KW Receiver: 270 L weight of the machine ca.: 180 Kg dimensions of the machine ca.: 1700x600x1270 mm feed pressure: 10 bar liter capacity: 850 l/min connected load frequency: 400 V The UWM 7.5 / 850/270 K30 + start box with K30 pump, V-belt drive, is suitable ideal for use at home, in the workshop, in industry and for heavy work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Power: 7,5 KW Receiver: 500 L weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,7x 0,6 x 1,45 m feed pressure: 16 bar liter capacity: 870 l The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 8 bar Effective free air delivery: 120/220 L/min Receiver capacity: 50l / 10bar l / bar weight of the machine ca.: 24 kg. Number of cylinders: 1 Stk. motor: 230V / 1,5KW V / KW range L-W-H: 1,1 x 0,32 x 24 mm This compressor comes standard with: - Maintenance-free oil-free engine. - Safety valve. - Reduction valve with pressure gauge and coupling. - Drain cock on the tank. - Italian compressor of the highest quality. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Turbo Tech Centrifugal Air Compressor Model: Til-4800 Compressor Stage: 3 Flow Rate: 80 m3/min Coupling Power: 374 kW Electric Power: 415V/50Hz/3Ph, IP23 Motor IE Standard: IE3 Motor type: ODP Inlet condition: 1.013barA, 35°C, Humidity 80% Main Motor Manufacturer: SIEMENS Motor Starter: Inverter Starter with Synchronous Bypass Service factor: 1.0 Air and Oil Cooling pipe material: Copper-Nickel For any inquiries, please contact: 1. email: zulaika.kamarudinn@gmail / rozitah@topglove.com.my 2. Contact Number: i. Ms. Zulaika: 012-9037331 ii. Ms. Rozitah: 018-2814801
Compressor Becker T 4.25 DSK; 50/60 HZ; 1420/1700 umin.; 1.10/1.30 KW power; Air flow rate 25/30 m3/h; Pressure 600/600 mbar; new slats; installed in Foliant Taurus 530. Compressor Becker T 4.25 DSK; 50/60 HZ; 1420/1700 umin.; 1.10/1.30 KW power; air 25/30 m3/h; pressure 600/6000 mbar; with new blades; used for Foliant Taurus 530.
maximum number of results exceeded
please refine your search
500 € 
