high pressure compressor used for sale

General SKU251M191 LocationBarneveld MakeFluko - Fluid Kotthoff GmbH Essen TypeDMS 3,2/50-20 No.14078-01 Main Features MaterialStainless steel Motor45 KW Rotor150 mm Specified Features - Inline mixer Continuous reactorIn-line dispersing machine (1x) Rotor sizesdia. 150mm Inletdia. 80mm Outletdia. 80mm Motor45,0 KW, 400/690 Volt Rotor speed2960 Rpm MaterialStainless steel 1.4571 (316Ti) Information Year of construction2005 Floorspace1,4x0,8 M Total height0,8 M Weight500 KGInline high shear mixersFlukoMixers > Inline high shear mixersBrand > Fluko What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU058C219 TypeFM342D LocationBarneveld Main Features MaterialStainless steel Motor15 KW Specified Features - Inline mixer Inlet70 mm Outlet40 mm Motor15KW, 380 volt Information Floorspace1,1 x 0.4 m Total height0.5 m Weight280 kgInline high shear mixers-Mixers > Inline high shear mixersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU205N026 LocationBarneveld MakeWaukesha Cherry-Burrell TypeSP4 2009 Main Features MaterialStainless steel Motor18.5 KW Rotor80 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizes+/- dia.80mm Inletdia.47mm Outletdia.47mm Number of stages:1 With mechanical sealcheck Motor18,5 KW, 380/660 Volt Rotor speed2930 Rpm MaterialStainless steel Information No.1000002431623 Mounted on framecheck Floorspace1,4x0,4 M Total height0,7 M Weight300 KGInline high shear mixersWaukeshaMixers > Inline high shear mixersBrand > Waukesha What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0088 MakeSchröder & Co Machinenfabrik LocationBarneveld Main Features MaterialStainless steel Motor2.2 KW Rotor90 mm Specified Features - Inline mixer Rotor sizesdia. 90mm Inletdia. 20mm Outletdia. 20mm Motor2,2 kW 230 Volt With frequency controllercheck MaterialStainless steel 1.4401 (316) Inline high shear mixers Inlet20 mm Outlet20 mm Information No.33-177 Year of constructionunknown Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,1x0,5 M Total height1,6 M Weight220 KgInline high shear mixersSchröderMixers > Inline high shear mixersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...

General SKU329S526 MakeIndag Maschinenbau GmbH (D) LocationBarneveld CEcheck TypeDLM-1/3 HO (S) Pressure Working pressure6.6 Bar Main Features MaterialStainless steel Motor3 KW Specified Features - Inline mixer Inletdia. 400 mm, dia. 35 mm, Outletdia. 35 mm With jacketcheck Motor3kW 220-240/380-415 Volts With frequency controllercheck Rotor speed400 rpm With vesselcheck Capacity49 Ltr. Vessel sizesdia. 400 x 650 mm With jacket19 Ltr. Max. temperature-10/100 °C MaterialStainless steel 1.4301 (304) Information No.4315 Year of construction2006 Mounted on framecheck With switchgearcheck Floorspace1,8x0,9 M Total height2,5 M Weight450 kg Extra Specifications With boiler: TWA GmBh &: Co. KG, SN: 015-2006-2542, 49 Ltr., max. working pressure: -0.95/4 bar, max. temperature: -10/100 °C, double-walled: 19 Ltr., max. working pressure: 0/4 bar, max. temperature: - ...

General SKU408S978 MakeKoruma Maschinenbau GmbH (D) LocationBarneveld TypeDisho In-Line 0/100 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter32 mm Rotor100 mm Specified Features - Inline mixer Continuous reactorIn Line Dispersing and Homogenising Rotor sizesdia. 100 InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Rotor speed2885 rpm With vesselcheck Capacity40 ltr. Vessel sizesdia. 390x400mm with stirrer 0,55 kW 230/400 Volt 309-1539 rpm MaterialStainless steel 1.4571 (316Ti) Inline high shear mixers InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Speed2885 rpm With propellor stirrercheck Motor0,55 kW 230/400 Volt With variable speed drivecheck Speed309-1539 rpm Information No.5389 Year of construction1995 Mounted on framecheck With switchcheck Floorspace1,2x0,6 M Total height1,7 M Weight200  ...

Klopp 1000 Quick Planer Total width: 150 cm Overall length: 3,330 cm Total height: 170 cm Planing width: 750 mm Working length: 1000 mm Table width: 900 mm

Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Hydraulic clamping -Documentation Dimensions: Hjbkn Asvw D Smeu S Tol LxWxH 2x1.7x1.9 meters / Weight 1900Kg

The machine is in good technical condition, testing is possible by prior arrangement. X-axis travel distance:3,200 mm Y-axis travel:1,400 mm Z-axis travel:900 mm X-axis rapid traverse:16 m/min Y-axis rapid traverse:20 m/min Rapid traverse: m/min Y-axis feed rate:10 m/min Z-axis feed rate:10 m/min Nominal (apparent) power:50 kVA Controller manufacturer:Fanuc α 30/3000i 7.0 Workpiece length (max.):4,000 mm Workpiece width (max.): max. 000 kg Total height: 4,500 mm Total length: 8,130 mm Total width: 4,150 mm Table width: 1,200 mm Table length: 3,200 mm Table load: 8,000 kg Total weight: 17,000 kg Maximum spindle speed: 8,000 rpm Diameter: 50 mm Tool length: 350 mm Tool diameter: 127 mm Tool weight: 20 g Equipment: documentation / manual, chip conveyor, infinitely adjustable speed

The machine is in good technical condition, testing is possible by prior arrangement. X-axis travel distance:1,035 mm Y-axis travel:560 mm Z-axis travel:510 mm X-axis rapid traverse:30 m/min Y-axis rapid traverse:30 m/min Z-axis rapid traverse:30 m Y-axis feed length:560 mm Z-axis feed length:510 mm X-axis feed:30 m/min Y-axis feed speed:30 m/min Z-axis feed speed:30 m/min Rated (apparent) power:17 kVA Torque:83 Nm Controller manufacturer: Sie 137 mm Overall width:3,355 mm Table width:560 mm Table length:1,200 mm Table load:1,000 kg Overall weight:4,250 kg Spindle speed (min.):20 rpm Maximum spindle speed:8 000 rpm Tool operation:20 Tool length:300 mm Tool diameter:80 mm Tool weight:6,000 g Equipment:documentation / manual, chip conveyor, infinitely adjustable speed

The machine is in good technical condition, after prior agreement it is possible to test it. Control system: Siemens Sinumerick 840D Total hours: 12,058 h Operating hours: 5,039 h Worktable length: 1200 mm Worktable width: 5 Spindle rotation: 8000 1/min Number of axes: 3 X-axis travel: 1035 mm Y-axis travel: 560 mm Z-axis travel: 510 mm

CHIRON FZ 08K S Magnum HSP High-Speed CNC Machining Center TECHNICAL FEATURES: Year: 2007 NC Type: FANUC 18i-MB5 Number of axes: 7 X-axis travel: 450 [mm] Y-axis travel: 270 [mm] Z-axis travel: 310 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] A-axis angular travel: 360 [°] A-axis indexing accuracy: 0.001 [°] B-axis angular travel: -20° / +115 [°] B-axis indexing accuracy: 0.001 [°] Pin Attachment: HSK40 Maximum speed Spindle: 30000 [rpm] Number of tool magazine stations: 40 Installed power: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW probe type TS27R x1 Spindle Cooling Unit x1 watering tray x1 unit for 6th side machining x1SCHUNK gripping system x84 HSK40 Type Tool Holder x14 Collet Type F35 x1 Electrical Cabinet Air C ...

Lift system, Kardex, shelf size: 1250x825mm, 7m high, – used - : Price from location: 13.950.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Bellheimer / Kardex Type: Shuttle 1250x825x10000 Device number: 95.008812/001 Year of Make: 1995 Tray size: 1250x825mm Device height: approx. 7m Depth: approx. 2.70m Width: approx. 1.6m wide. Number of shelves: 44 pieces Permissible total payload: 2x10,000kg Permissible shelf load: 250kg 3x400V, A: 3x5.2, KW 3.6 Condition: used Available: from approx. week 13/2026 Location: Speyer

High tipping bucket 240 cm with Euro hitch, - Own weight: 793 kg, - HYDRAULIC CONNECTOR 1 Euro quick-release coupling ISO 12.5 M18x1.5 – Socket, - HYDRAULIC CONNECTOR 2 Euro quick-release coupling ISO 12.5 M18x1.5 – plug, - profiled sides to increase volume, - Volume: 2.28 m³, - Dig scraper strip HB500 150x16, - Scraper strip HB500 150x16 easy access to bolt lubrication, - tilt angle 109°

Micro-blower instead of compressed air-driven nozzles, e.g., for installation in front of the inkjet coder for drying the coding area, all-aluminum housing, IP67 protection rating, integrated electronics, power consumption: max. 190 watts, compact, quiet (55 dB(A)) and efficient, flow rate at 43,000 rpm: min. 160 l/min, pressure: 119 mbar, optional power supply., This small and quiet 24-volt fan, IP67 rated, delivers incredible performance. See for yourself!, - Energy savings of up to 90% compared to compressed air applications, - Easy installation, - Only about 70 decibels, - Can also be used as a vacuum blower, Power consumption: max. 190 watts

Offer 26444 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 45 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Projection 385 mm - Table with 2 T-slots with hand crank height-adjustable - Table size 550 x 480 mm - min. / max. distance table / drilling spindle 120 / 650 mm - Column diameter 200 mm - Feeds-Electromagnetic 0.1 - 0.2 - 0.3 - 0.4 mm/rev. - With overload protection - Drilling spindle speeds infinitely variable in 3 stages 60 - 1900 rpm. - Drive 400 V / 3 kW - Space requirement approx. W 700 x H 2120 x D 1100 mm - Weight approx. 700 kg - with: - Tapping device - Coolant device - Digital speed display The machine can be viewed at the location 63322 Rödermark by appointment. Erich Mieth Company: Tel. 06074-90877 Monday - Friday: 9:00 a.m. - 12:00 p.m. and  ...

High-magazine drawer cabinet metal grey 14 drawers, approx. 75x106x75t cm, small contents socket wrenches, screwdriver

High-magazine drawer cabinet metal grey 13 drawers, approx. 75x106x75t cm, keys, small contents

High-magazine drawer cabinet metal grey 14 drawers, approx. 75x106x75t cm, small contents hand tools, pipe wrenches, screwdrivers, saws etc.

High-bay pallet racks steel blue approx. 18 stands, each total approx. 600x120t cm, uprights partly connected, approx. 84 trusses each approx. 270b cm, approx. 12 trusses each approx. 180b cm, wooden inserts, ATTENTION: Removal only possible via the window - inspection recommended for removal, no aerial platforms or aerial work platforms on site! Location 1st floor

High-speed mixers Manufacturer: Henschel Type FM-4 Serial No. 80 5002 Double jacket for heating and cooling Total capacity 4 liters Working capacity 3 liters

Conveyor belt / conveyor belt / high conveyor / downward conveyor - Length: approx. 3,050 mm - Belt width: approx. 400 mm - With geared motor - Plastic link belt with curved carriers 100 mm high ---------------------------------------------------------------------- Conveyor belt / transportation belt / high conveyor / down conveyor - Length: approx. 3-050 mm - Belt width: approx. 400 mm - With gear motor - Platic link conveyor belt with bended catch 100 high

High-current terminal, terminal, series terminal, through terminal, switch-disconnector -Manufacturer: Phoenix Contact -91 pieces: high-current terminals, type PTPOWER 95 -99 pieces: high-current terminals, type PTPOWER 95-PE -290 pieces: high-current terminals type PTPOWER 95 (P) -130 pieces: type EB 2-25/PT -Manufacturer: DILOS -3 pieces: switch disconnector type D/061324-201 -Component: are sold together -Price: complete -Weight including packaging: 130 kg

High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

High-voltage system, high-current system, high-voltage system, transformer -Manufacturer: Himmel, high-voltage system, high-current system -Type designations: Sky HG 64-25 KTS-01 9942 -High frequency: 0.7 MHz -Rated power: 25 kW -Individual components/technical data: see photos, nameplate -Dimensions: 1605/880/H1840 mm -Weight: 830 kg

Pallet trucks, special pallet trucks for high pallets, pallet trucks, pallet jacks -Load capacity: 2000 kg -Dimension when retracted: 195 mm -Extended length: 320 mm -Fork length: 1010 mm -Fork width (outer): 665 mm -Inner fork width: 345 mm -Weight: 105 kg

High-voltage motor, electric motor, three-phase asynchronous motor with squirrel-cage rotor -Power: 630 kW -Voltage: 10500 V -Speed: 1493 rpm -Shaft: Ø 65 x 140 mm -Design: B3 -Protection class: IP 54 -Documentation: everything available -Quantity: 1 piece available -Dimensions: 2440/1885/H1500 mm -Weight: 5000 kg

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Handover: in current condition as viewed -Condition: without grinding spindle -Grinding spindle for: Lathe -electric: operated -Motor: VEM 0.75 kW -Bracket: Ø 80 mm -Dimensions: see photos -Total dimensions: 600/370/H350 mm -Weight: 60 kg

Manufacturer: Giardina 4 Zonen Trockner, Year: 2007, Control: SPS TX 37, Work piece width min-max mm: 100-1320, Min.-max. workpiece length in mm: 300-3500, Min.-max. workpiece height in mm: 6-70, Working widht max mm: 1320, Number of pallets: 92, Palettenausmass LxBxH mm: 3665 X 1400 X 90, Lichte weite Paletten: 115, Tragfähigkeit Palette kg: 180, Palettenausmass LxBxH mm: 3665 X 1400 X 90, Trockenzonen: 4, Abluftzone 1 Abluftmenge m/h³: 6000, Heizregister 1 kcal/h³: 30000, Trockenzone 2 Abluftmenge m/h³: 4000, Heizregister 2 kcal/h³ : 57000, Trockenzone 3 Abluftmenge 3 m/h³: 4000, Heizregister 3 kcal/h³ : 57000, Kühlzone 4 Abluftmenge 3 m/h³: 8000, Heizregister 4 kcal/h³ : Möglich 57000, Feeding speed m/min: 3-5, Conveyor/Conveyor belt: Stange, Heizmedium Warwasser: 3 X Viessman 60 kw Gastherme, Max.Temperatur Grad: 50, Damper register - items: ...

GeneralTraveling column machine; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal2000 mmCross800 mmVertical850 mmTool changerType of magazineChain Number of tools50 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmSwivelhead, B-axisControlled NC swivel milling head 12,000 rpm (B-axis) with clamping in position Continuously positioning NC- swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel speed: 50 rpm Swivel range: ±12Clamping System HSK-A 100Spindle taper HSK-A 100Speed range 20 -12000 rpmTorque (40% DC) 288 NmTorque (100% DC) 187 NmDrive power (40% DC) 44 kWDrive power (100%  ...

Professional outside micrometer with a range of 1600-1800 mm, resolution 0.01 mm. The positive spindle lock holds the anvils in place to ensure accurate measurement registration. High-quality construction combined with easy handling makes this type of analogue micrometer particularly suitable for control operators, workshop technicians, repairers and service personnel. It is supplied in a wooden case for storage and easy transport. Machine condition: unchecked. Approx. Transport dimension: LxWxH 2200 x 1660 x 160 mm; Approx. Weight: 90kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-455

Manufacturer: SOTOS VOJUS (VOJUS a.s.) Year: 2001 Type: CNC lathe with automatic cycle Numerical control: Siemens Sinumerik 840D ShopTurn Max. turning diameter: Ø 630 mm Diameter above dragger: Ø 420 mm Max. turning length: 3,000 mm Spindle: up to 2,500 rpm – passage Ø 110 mm Fast feeds: longitudinal 10 m/min – transverse 5 m/min Installed power: approx. 26 kW Equipment: Multifix tool holder, 1 bezel, coolant Dimensions (mm): 3000 × 1800 × 1790 Weight (kg): approx. 4500 Remarks: High-capacity CNC lathe for long workpieces. Serial number included in the description. Auction-ID: A1-44765-220

• Voltage 230 V • Halogens, 300 W lamps • 13 x PRODELUX FL I square high bays • 2 x GL2306 round high bays • Maybe some unit is hit or some lamp is missing • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-164

• Voltage 230 V • Halogens, 250 W lamps • 6 x BJC F-15250-M round high bays • 8 x INDALUX square high bays • Maybe some unit is hit or some lamp is missing • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-183

General SKULW008 MakeNetzsch Feinmahltechnik GmbH LocationGermany CEcheck TypeEPSILON 30 Pressure Working pressure5 Bar Main Features MaterialStainless steel Motor37 KW Specified Features - Inline mixer Capacity0,55 Ltr Motor37,0 KW ATEX II 2G Ex dII T4G With frequency controllercheck Rotor speed600 -3600 rpm With vesselcheck Capacity1500 ltr With jacketcheck 6 ltr Max. temperature60°C. MaterialStainless steel Information No.2500441-10 Year of construction2020 Mounted on framecheck With switchgearcheck ATEX compatiblecheck Extra SpecificationsSolids intake :50 - 5000 kg/h Suspension flow during solids intake 15 - 30 m³/h Max. suspension flow during circulation 67 m³/h (water) Technical specs Extra informationStandard rotor version”Inline high shear mixersPaints & coatingsNetzschMixers > Inline high shear mixersIndustries > Chemical > Paints & coatingsB ...

CW light detection and Siemens Simatic HMI Control. Collection by Appointment Only. This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45162-21

Mecof CS500 High Rotation CNC Head Type: High-speed CNC milling head Manufacturer: Mecof Model: CS500 Year of build: 2012 Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-62

The attached PDF file must be complied with, especially the neutralization obligations! Here, 40 foot containers of Super High Cube DBCL40HCW are auctioned with 1-2 sea routes. 90.1 cubic meters volume. These containers are suitable as a storage area due to the special interior dimensions, especially the interior height of approx. 3 meters, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please also note the additional information i ...

Volume 58 l, max. pressure 3 MPa, 4 motors with 4 fans Auction-ID: A7-45702-29

High-voltage extension cable approx. 5 m

Equipped with 2 separately opening side doors and end door; lock case; unused Auction-ID: A1-40104-141

Equipped with 4 separately opening side doors and end door; lock case; maximum loading capacity 24 Tons; unused Auction-ID: A1-40104-140

Conver C430H Mower boat - serial number 175 - Year of construction 2001 - Weight 1800kg Equipped with cutting bar 140cm wide with serrated knives Mitsubishi S4L engine Stove Servo operated Cruise control Trailer equipped with radio remote control for the winch Casco working width 1500cm - racks foldable 2x 50cm - total working width 250cm Auger height adjustable (hydraulically driven) Auction-ID: A1-40134-194

Equipped with: type: 1200, year of construction: 1993, working height: approx. 12.20 meters, max. lateral reach: approx. 4.50 meters, max. Basket load: 215 kg (suitable for 2 people + tools), Own weight: approx. 1,120 kg, Dimensions work basket: 1.10 x 0.65 meters, Drive: electric 220V, equipped with 4 mechanically extendable outrigger legs for quick and safe setup, 7-pin plug, no license plate, outrigger plates. Auction-ID: A1-40134-182

General SKU200W006 MakeHPV TypeRV Base SO No.2002-M-1 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm MaterialStainless steel 1.4404 (316L) Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Information With switchgearcheck (as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO. with: IKA, type Dispax-reactor DR2000/5-ATEX, year 2013, motor 7,5kw, 400V, EX. Nirosta vertical ...

Bucket 1400x1000mm. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-135

Product Categories: Material Dispenser, Including: 1 x Film Holder: 173cm long. Auction-ID: A1-45762-22

Cutting length: 78 cm, Touchscreen color display, Light barrier, Air table, Replacement blade, Documentation, Year of construction: 2005, Cutting width: 78 cm, cutting length: 78 cm

A used cutting machine Polar 78XT Touch screen Side Tables Chrome-plated table Air table

Offer 26030 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Tapping device - Drilling spindle holder MK 3 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable - Stage 1. 65 - 240 rpm - Stage 2. 130 - 480 rpm - Stage 3. 240 - 875 rpm - Stage 4. 800 - 1750 rpm - 3 feeds 0.1; 0,2; 0.3 mm/rev - Projection 290 mm - Max. distance table - drilling spindle 520 mm - Turning table with 2 T-slots 450 x 450 mm - Height adjustable via rack with hand crank - Machine vice below the turning table - Emergency Off Button - Lighting - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 660 x H 1900 x D 700 mm - Weight approx. 280 kg