high grade used for sale

Manufacturer: Kärcher Model: HDS 895 M Eco Category: Hot water high-pressure cleaner Type: Mobile pressure washer Technical data Power supply: Electric motor Heating system: Integrated diesel burner Pressure adjustment: Yes Water temperature adjustment: Yes Pressure gauge: Yes Integrated detergent tank: Yes Transport: Wheeled chassis with push handle Remarks Used machine in non-tested condition. Model identified from the control panel. Type plate not visible. Unit shows typical signs of use, scratches and paint wear. Burner, pump and control panel installed. Sold as shown in the photos. Auction-ID: A7-48897-97

Equipped with storage space; new tyres; suitable as a highway shack; shutters; insulated windows with double glazing; Four extendable support legs. Auction-ID: A1-47412-88

MACHINE DATA: -Standard version (according to technical data sheets) -Articulated Loader -Operating weight 2850 kg -Long Boom -FOPS-ROPS canopy, a cab version is also available. -Mechanical suspended seat - vinyl -2 large rear-view mirrors -Standard fenders -Speed 0-20 kph -Wide range of attachments ENGINE: -Engine emissions according to Stage V or Tier 4 Final - EU Directive 97/68 -Water-cooled Perkins engine TCD 1.7 L3, 36 kW (49 hp) at 2800 rpm. DOC+DPF -BOOM & QUICK-COUPLER -Loader boom with P-bucket orientation kinematics with 100% precise parallel lifting -Boom float function -4 points hydraulic quick-coupler TRANSMISSION: -Hydraulic system -Hydrostatic transmission with wheel motor -Hydrostatic inching brake, acting on all 4 wheels -Hand throttle (M-Drive) -Speed limit (Speed-control) -4-wheel drive -Tyres BKT AS504 - 11,5/80 - ...

Distance between tip 3200 mm approx., chuck diameter 250 mm Auction-ID: A1-48824-64

Manufacturer: Kärcher Model: HDS 895 S Category: Hot water high-pressure cleaner Type: Mobile pressure washer Technical data Power supply: Electric motor Heating system: Integrated diesel burner Pressure adjustment: Yes Water temperature adjustment: Yes Detergent dosing: Adjustable (0–4%) Pressure gauge: Missing Transport: Wheeled chassis with push handle Equipment Integrated water tank Integrated detergent tank Control panel with temperature and detergent adjustment Remarks Used machine in non-tested condition. Model identified from the control panel. Type plate not available. Pressure gauge is missing. Shows typical signs of use, scratches, dirt and paint wear. Sold as shown in the photos. Approx. own mass: 180 kg Auction-ID: A7-48897-98

El. Power: 315 kW Air volume: 2,760 Nm³/h Oil free compressing and water-cooled Auction-ID: A7-49594-9

Type: Hot water high-pressure cleaner Working data Water heating: Diesel-fired boiler Pressure adjustment: Yes Water temperature adjustment: Yes Chemical dosing: Adjustable Pressure gauge: Integrated Power supply: Electric Equipment Integrated detergent tank Integrated fuel tank for burner Transport wheels Push handle Control panel with temperature and detergent adjustment Remarks Used hot water high-pressure cleaner in non-tested condition. Machine shows normal signs of use, scratches and paint wear consistent with age. High-pressure hose, spray gun and lance are not included unless shown separately. Sold as shown in the photos. Approx. own mass: 130 kg Auction-ID: A7-48897-100

bore capacity in steel (diameter): 32 mm arm length: 1230 mm table surface area: 1200 x 500 mm bore stroke: 180 mm feed - independent: 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds: 45 - 1370 U/min taper MK: 4 total power requirement: 2,7 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26252 Technical data: - Drilling capacity into solid steel ST 60 22 mm - Drilling capacity GG 25 32 mm - Threading ST 60 M 20 - Threading GG 25 M 24 - Drilling spindle holder MK 4 - Quill stroke 140 mm - 18 drilling spindle speeds 60 - 3050 rpm - Drill feeds infinitely variable 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max 420 / 1320 mm - Swivel angle 320 ° - Table size 1200 x 600 mm - Table height 905 mm - mot. Height adjustment / stroke of the drilling column 430 mm - hydr. Columns + Boom Clamp - T – Vertical grooves on the left side of the machine - Coolant device - Drive 400 V / 1.1 / 1.6 kW - Space requirement approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight approx. 1800 kg

Offer 26231 Technical data: - Drilling capacity in steel St 60 45 mm - Drilling capacity in steel St 60 55 mm - Drilling spindle holder long spindle MK 4 - Drilling spindle speeds AZ gearbox infinitely variable in 2 speed series - 40 - 760 rpm - Drilling spindle stroke 140 mm - Projection 300 mm - Column diameter 145 mm - Table with 2 T-slots 460 x 420 mm - Distance table-drilling spindle min / max 35 / 640 mm - Drill spindle – machined base plate approx. 1150 mm - 3 feeds 0.10 - 0.20 mm/rev - Drive 400 V / 1.8 / 2.9 kW - Keyless chuck - Machine vise - Space requirement approx. W 600 x H 1800 x D 950 mm - Weight approx. 380 kg

Offer 26231 Technical data: - Drilling capacity in steel St 60 45 mm - Drilling capacity in steel St 60 55 mm - Drilling spindle holder long spindle MK 4 - Drilling spindle speeds AZ gearbox infinitely variable in 2 speed series - 40 - 760 rpm - Drilling spindle stroke 140 mm - Projection 300 mm - Column diameter 145 mm - Table with 2 T-slots 460 x 420 mm - Distance table-drilling spindle min / max 35 / 640 mm - Drill spindle – machined base plate approx. 1150 mm - 3 feeds 0.10 - 0.20 mm/rev - Drive 400 V / 1.8 / 2.9 kW - Keyless chuck - Machine vise - Space requirement approx. W 600 x H 1800 x D 950 mm - Weight approx. 380 kg

HIGHTOP HH08 Micro Excavator – 680 kg Brand: HIGHTOP Model: HH08 Type: Micro crawler excavator Place of deposit: Gistel, Belgium Description HIGHTOP HH08 compact micro excavator ideal for earthmoving, landscaping, trenching and restricted access work. Thanks to its reduced width of only 72 cm, this machine is particularly suitable for narrow passages and small construction sites. Equipped with a single-cylinder air-cooled KOOP diesel engine with approximately 8.6 kW (11.7 hp), boom offset and dual hydraulic tracks for the use of hydraulic attachments. Technical characteristics Brand: HIGHTOP Model: HH08 Operating weight: 680 kg Width: 720 mm Engine: KOOP single-cylinder diesel Cooling: Air Power: 8.6 kW (11.7 hp) Deflection: Yes Hydraulic outputs: Dual channels Digging depth: ± 1,200 mm Rubber tracks Front dozer blade Keyed electric start Accessories 300 mm earthmoving bucket with tin ...

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug officially for batteries with 300-500Ah, but works up to 800Ah Delivery by freight forwarder possible on request. Auction-ID: A1-49673-4850

HIGHTOP HH08 Micro Excavator – 680 kg Brand: HIGHTOP Model: HH08 Type: Micro crawler excavator Place of deposit: Gistel, Belgium Description HIGHTOP HH08 compact micro excavator ideal for earthmoving, landscaping, trenching and restricted access work. Thanks to its reduced width of only 72 cm, this machine is particularly suitable for narrow passages and small construction sites. Equipped with a single-cylinder air-cooled KOOP diesel engine with approximately 8.6 kW (11.7 hp), boom offset and dual hydraulic tracks for the use of hydraulic attachments. Technical characteristics Brand: HIGHTOP Model: HH08 Operating weight: 680 kg Width: 720 mm Engine: KOOP single-cylinder diesel Cooling: Air Power: 8.6 kW (11.7 hp) Deflection: Yes Hydraulic outputs: Dual channels Digging depth: ± 1,200 mm Rubber tracks Front dozer blade Keyed electric start Accessories 300 mm earthmoving bucket with tin ...

Total 25 pairs, waterproof, delivered in original packaging Auction-ID: A1-48552-186

Thimonier High-Frequency Vertical Form Fill & Seal Machine 30-60 BPM Auction-ID: A1-48805-29

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, without Rema plug Delivery by freight forwarder possible on request. Auction-ID: A1-49673-2450

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-49673-3468

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug for batteries with 300-800Ah possible Delivery by freight forwarder possible on request. Auction-ID: A1-49673-4851

HIGHTOP HH08 Micro Excavator – 680 kg Brand: HIGHTOP Model: HH08 Type: Micro crawler excavator Place of deposit: Gistel, Belgium Description HIGHTOP HH08 compact micro excavator ideal for earthmoving, landscaping, trenching and restricted access work. Thanks to its reduced width of only 72 cm, this machine is particularly suitable for narrow passages and small construction sites. Equipped with a single-cylinder air-cooled KOOP diesel engine with approximately 8.6 kW (11.7 hp), boom offset and dual hydraulic tracks for the use of hydraulic attachments. Technical characteristics Brand: HIGHTOP Model: HH08 Operating weight: 680 kg Width: 720 mm Engine: KOOP single-cylinder diesel Cooling: Air Power: 8.6 kW (11.7 hp) Deflection: Yes Hydraulic outputs: Dual channels Digging depth: ± 1,200 mm Rubber tracks Front dozer blade Keyed electric start Accessories 300 mm earthmoving bucket with tin ...

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug for batteries with 150-400Ah possible Delivery by freight forwarder possible on request. Auction-ID: A1-49673-2430

Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Unwinding reel / coil reel Soundproof cabin Conveyor belt for part removal Lifting and sorting device for containers Roller conveyors and stacking racks Technical documentation available Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available. Technical Specifications Stroke Power 500 kN (50T) Table area: 940 x 580 mm Tool length max. 950 mm Operating hours 49637 Strip width: Max. 202 mm Machine dimensions: 3100 x 2700 x 1800 m ...

Equipped with: Siemens Sinumerik CNC control, 2007 Rittal SK 3304142 cooler, 2007 Knoll FKA/350 refrigerant system (116x83x150cm), 350 litres, 2.2 kW, 3×400 V, serial number 349718, Knoll chip conveyor type 350 K-1/100, year of manufacture 2000, serial number 88972; (450x110x184cm) Auction-ID: A1-41279-1

Equipped with 4 separately opening side doors and end door; lock case; maximum loading capacity 24 Tons; unused Auction-ID: A1-47358-108

Equipped with tracked undercarriage; electric start; high tilt function; Auction-ID: A1-47387-274

Equipped with safety bumper, tow bar, air conditioning, cruise control, navigation, radio, electric windows, interior, reversing camera, without ladder, length approximately: 599 x width: 204 cm, parking heater, protective covers on the seats Auction-ID: A1-47414-10

Schaal SEP 80 SZV 302 Automatic Punching Press Machine • 2001 • ID: 34126 Frame and guidance on this unit are built for repeatability: a rigid double-column O-frame in vibration-damping cast iron, with the ram carried in 6-point play-free roller guides. Power is transmitted by a flywheel drive with pneumatic clutch/brake combination. Year of manufacture is 2001. Control and protection - Unidor electronic control system giving repeatable stroke accuracy and fast setup; integrated tool safety device protecting dies from damage caused by misfeeds or incorrect part positioning, which reduces downtime and tooling costs. Key data - pressing force 800 kN (80 tons); 60 – 320 min⁻¹; ram stroke adjustable 8 – 80 mm; ram adjustment 80 mm; ram surface 700 × 500 mm; clamping plate 830 × 700 mm at 80 mm thickness; table opening 500 × 200 mm; strip feed clearance 120 ± 40 mm; drive po ...

• Volkswagen Crafter 35 panel van / high roof • Registration date: 06.06.2023 • Year of construction: 2023 • Engine: 2.0 TDI diesel • Displacement: 1,968 cm³ • Power: 103 kW / 140 hp • 6-speed manual transmission • Mileage: 52,144 km • Permissible total weight: 3,500 kg • 3 seats • Color: White / Blue • Air conditioning and multimedia system with DAB • Vehicle is in accident damaged condition • Considerable front damage present • Hood severely dented and deformed • Front bumper and front fairing badly damaged • Radiator/condenser area visibly damaged • Damage to front carriers and mounts possible • Driver airbag triggered • Further damage to the restraint system cannot be ruled out • Interior with signs of wear and dirt • Seats and dashboards are mostly neat • Technical condition and roadworthiness not conclusively test ...

Working pressure 150bar – 15Mpa. Work extremely powerful and absolutely environmentally friendly! Maximum temperature 90°C - 284°F Maximum pressure 150bar – 15Mpa Capacity 900 l/h – 15 l/min burner power 3600W motor power 3.0 kW power supply 230V/50Hz detergent tank diesel Auction-ID: A1-40304-149

Capacity … Vials DIN ISO : 2R ø16x35mm, 6R ø22x40mm and 10R ø24x45mm Line set performance output 24.000 / 21.600 / 20.100 pcs/h Consisting of: 1x Heatsystems Electric process heater with Pallas UV treatment unit 1x stainless steel Rotary pharmaceutical vial washing machine model RRN 3085, s/n 759606 1x stainless steel pharmaceutical hot-air sterilizing tunnel model HQL 8120 S, s/n 759607 1x stainless steel isolator module model ITP 1004 A, s/n 759610 1x stainless steel automatic liquid vial filling and closing machine model ALF 5080 s/n 759608 1x stainless steel closing machine model VRK 4120 BL, s/n 759609 1x Videojet stainless steel label printer model 1580 stainless steel out-feed conveyor Complete with changeable format sets for 2R, 6R and 10R, changeable closing wheel sets sizes ø 22,5x9,4mm and ø 14,9x7,8mm, 6x Syntegon glove leak testers, various machine  ...

Type: High Efficiency Inline Circulator Connection: DN100 Flange Pressure: PN16 Installation length: 450 mm Maximum head: 31.6 meters Maximum flow rate: 139.6 m³/hour Maximum working pressure: 16 bar Media temperature: -20 °C to +140 °C Engine Power: 5.5 kW Power supply: 3 × 380–440 V Frequency: 50/60 Hz Speed: 500–3640 rpm (variable speed reducing) Rated speed: 3000 rpm Current: 10.5–9.1 A Engine efficiency: 94.4% Efficiency class: IE5 / IES2 Insulation class: F Degree of protection: IP55 Pump weight: 68.8 kg Motor weight: 32.9 kg Auction-ID: A1-47442-121

Please note! Malfunction (sensor) automatic gearbox, does not shift from 2 to 3/4. Please note! Signs of wear by age and use. Auction-ID: A1-47414-175

420 cc engine Rated pressure of 4400 PSI Nominal pressure 303 bar 4.0 GPM rated current 4 spray nozzles 1 soap nozzle 15.24M Braided High Pressure Hose 33 cm Never Flat tyres Unused. Auction-ID: A1-40304-87

UMT AC770-19 | 19 Liter High Pressure Compressor is a professional, robust high pressure compressor with a capacity of 19 liters, designed for demanding applications in industry, workshop or garage. This compressor offers an excellent balance of power, capacity, and ease of use, making it ideal for applying pressure for paintwork, pneumatic tools, and cleaning operations. Capacity: 19 liter reservoir for continuous and stable pressure delivery. Construction: Strong, durable housing with high-quality materials for long-lasting use. Motor: Powerful motor that comes up to pressure quickly and is suitable for intensive use. Pressure level: Suitable for high-pressure applications, with a maximum working pressure that meets industry standards. Ease of use: Easy operation, with pressure control and safe pressure release valve. Mobility: Compact and portable design, ideal for use in a variety o ...

Fitted with new tyres. Highway shack. Shutters. Double-glazed insulated windows. Four extendable support legs. Equipped with toilet (WC). Auction-ID: A1-47412-90

Röders RFM 600 Hochgeschwindigkeitsfräsmaschine Hersteller: Röders Typ: RFM 600 Baujahr: 2000 Zustand: gebrauch, unter Strom, Steuerung auf Windows 7 NEU x-Weg 600 mm y-Weg 500 mm z-Weg 300 mm Steuerung RÖDERS RMS 6 3.60 Spindelaufnahme HSK E 40 Spindeldrehzahlen 42.000 U/min Werkzeugwechseleinrichtung 18-fach Tischgröße 700×;500 mm Werkstückgewicht 800 kg Antrieb 14 kW Gesamtleistungsbedarf kW Maschinengewicht ca. 5,2 t Raumbedarf ca. 3,2×;2,25×;2,65 m Röders Jobmanager (zum Bearbeiten mehrerer Werkstücke nacheinander) Antastprogramme für nahezu alle gängigen Geometrien Extor Absauganlage für Staubende Zerspanung Minimalschmierung Bettbahngebläse Blum Messlaser (für die Werkzeugvermessung Länge + Durchmesser + Kontur und Bruchkontrolle ) Werkzeugreinigung (Luft) Kühlaggregat für Spindel und Schaltschränke Dokumentation

Weiler Praktikant VC Präzisionsdrehmaschine Hersteller: Weiler Typ: Weiler Praktikant VC Präzisionsdrehmaschine Baujahr: 2002 Zustand: gebraucht, sehr gut, gewartet und geprüft mit Prüfprotokoll nach Werksvorgaben von Weiler. Technische Details. Drehdurchmesser 250 mm Drehlänge 650 mm Spitzenhöhe 160 mm. Umlaufdurchmesser über Bettschlitten 320 mm Umlaufdurchmesser max. über Planschieber 190 mm Hauptspindel: Drehzahlbereich ? Hauptspindel 30 ? 4.000 min/-1 Antriebsleistung ? Hauptspindel 10 / 6,0 kW Getriebestufen 1 Spindelkopf. 5 / DIN 55027 Spindeldurchmesser im vord. Lager 70 mm Spindelbohrung 40 mm Nutzbarer Stangendurchmesser 40 mm Reitstock.: Pinolenhub 85 mm Pinolendurchmesser 40 mm Reitstockaufnahme MK 3 Vorschübe: Anzahl der Vorschübe 24. Längsvorschub 0,02 ? 0,63 mm/-1 Planvorschub 0,006 ? 0,2 mm/-1 Gewindeschneiden: metrisch 0,25 ? 8 mm  ...

Weiler Praktikant VCD Präsizions Drehmaschine (2021) Hersteller: Weiler Typ: Praktikant VCD Präsizions Drehmaschine Baujahr: 2021 Zustand: gebraucht, sehr gut, neuwertig, inkl. neue Wartung und Vermessungsprotokoll vor Verkauf. Spitzenweite 650 mm Spitzenhöhe 160 mm. Umlaufdurchmesser über Bett 320 mm Umlaufdurchmesser über Planschieber 190 mm Verschiebeweg des Planschiebers 150 mm. Verschiebeweg des Obersupports 110 mm Schwenkbereich Obersupport +/-65 ° Führungslänge des Bettschlittens 350 mm Bettbreite 205 mm Drehmeisselquerschnitt (Höhe x Breite) 20 x 20 mm Höhe vom Oberschlitten bis Drehmitte 30 mm Spindelkopf nach ISO DIN 702-3 (DIN55027) Grösse 5 Spindeldurchmesser im vorderen Lager 70 mm Spindelbohrung 43 mm Innenkegel der Hauptspindel Metrisch 50 Antriebsleistung 6 kW. Drehzahlbereich 30 ? 4000 U/min Anzahl der Getriebestufen 1 Anzahl der Drehzah ...

Weiler Praktikant VCD Präsizions Drehmaschine (2013) Hersteller: Weiler Typ: Praktikant VCD Präsizions Drehmaschine Baujahr: 2013 Zustand: gebraucht, sehr gut, neuwertig, keine Gebrauchspuren, inkl. neue Wartung und Vermessungsprotokoll vor Verkauf. Spitzenweite 650 mm Spitzenhöhe 160 mm. Umlaufdurchmesser über Bett 320 mm Umlaufdurchmesser über Planschieber 190 mm Verschiebeweg des Planschiebers 150 mm. Verschiebeweg des Obersupports 110 mm Schwenkbereich Obersupport +/-65 ° Führungslänge des Bettschlittens 350 mm Bettbreite 205 mm Drehmeisselquerschnitt (Höhe x Breite) 20 x 20 mm Höhe vom Oberschlitten bis Drehmitte 30 mm Spindelkopf nach ISO DIN 702-3 (DIN55027) Grösse 5 Spindeldurchmesser im vorderen Lager 70 mm Spindelbohrung 43 mm Innenkegel der Hauptspindel Metrisch 50 Antriebsleistung 6 kW. Drehzahlbereich 30 ? 4000 U/min Anzahl der Getriebestufen ...

Donau Flex 135 Schnellradialbohrmaschine Hersteller: Donau Typ: Flex 135 Schnellradialbohrmaschine Zustand: gebraucht, sehr gut bis neuwertig Baujahr 2020 Stufenlose Drehzahleinstellung Stufenloser Pinolenvorschub Gewindeschneideinrichtung Abmessungen und Verfahrwege Werkzeugaufnahme MK 4 Säulendurchmesser mm 170 Tischabmessung mm 1200 x 600 Anzahl der T-Nuten 4 Abstand der T-Nuten mm 125 Pinolenhub mm 165 Säulenhub mm 450 Bohrleistung ins Volle St 60 mm 35 GG 22 mm 42 Gewindeschneiden St 60 M 30 GG 22 M 36 AC-Motor, frequenzgesteuert kW 4,0 bei 100 % ED. Drehzahlbereich: min -1 20 ? 3200 Vorschub stufenlos mm/U. 0,02 ? 0,7 Maschinenleuchte Spindelschutz

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-49372-525

Industrial Supreme Antifreeze/Coolant for High Frequency Current Equipment Auction-ID: A1-48648-200

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-49372-523

galvanized, 14-piece package, height 6500mm, width 1300mm Auction-ID: A7-49222-60

The current XD set consists of 2 dolly frames, 2 telescopic axles, a break-over control rod. 1,815 kg capacity Auction-ID: A1-47414-271

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-49372-526

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-49372-524

380V-50Hz; 3PH; Max 60C; 200BAR; 14.0L/min; including spray lance; Auction-ID: A1-49372-95

Equipped with 2 separately opening side doors and end door; lock case; unused Auction-ID: A1-47386-333

380V-50Hz; 3PH; Max 60C; 200BAR; 14.0L/min; including spray lance; Auction-ID: A1-49372-506