high frequency press used for sale

J.A.Becker & Söhne SVB300/250 high-pressure compressor Built: 2005 Overpressure: 250 bar Volume flow: 300 liter/min ( 18m3/h) Engine power: 7.5kW Operating hours: cca. 2000 hour Pressure HP filter NEW Öel NEW Impeccable condition ! Only for industrial use ! No breathy !

Built: 1990 Overpressure: 265 bar Volume flow: 250 liter/min ( 15m3/h) Engine power: 5.5kW Pressure Öel NEW Impeccable condition ! Only for industrial use ! No breathy air !

Dynajet 500 me , NEW, Operating pressure: 500 bar, Number of foerders: 15 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Operating pressure: 150 bar, Number of foerders: 42 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Operating pressure: 1000 bar, Number of foerders: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Engine hours: approx: 2 h, Trolly, incl. pistol, 10 m HD hose, 15° flat jet dues,

Operating pressure: 350 bar, Flow rate: 21 l/min, Engine: Vanguard 2-cylinder, 4-stroke gasoline engine Working hours: 2h

High Speed Precision Press Maker Obata (Japan) Year of manufacturing - 1981 Capacity 10 t Stroke length 22 mm Speed 100-400 stroke/min price 6000 EUR

Bruderer press. Year of production: 1985 Condition: perfect The press has a soundproofing cabin and a roll feeder.

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame without motor. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Operating pressure: 530 bar Flow rate: 55 l / min. Drive speed: 1500 rpm. Drive power: 55 kW without engine, with pressure control valve, Bwfz23o8wi with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm Weight: approx. 300 kg Year of construction: 1998 Condition: in good used condition.

RADAX high-pressure duct fan High-pressure duct fan with cylindrical pipe sleeve, flanges on both sides, directly driven. Cylindrical galvanized steel tube Sheet metal, with double-sided moulded Flange, hole pattern according to DIN 24155, recessed built guide wheel. Semi-axial impeller, eight spatially connected curved blades made of thermoplastic, Balancing quality G 6.3 according to VDI 2060 and DIN ISO 1940. Three-phase squirrel-cage motor by Voltage reduction speed controllable, Thermal contacts, closed design, maintenance-free, sealed, low-noise Ball bearings with long-term lubrication. Fan data (default) Seawater version. Also resistant to weak acids and alkalis. NEW!

Air Pressure: 40 // Delivery Rate: 1320

Air Pressure: 42 bar

RECON Part number: 524 070 11 01 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Bruderer Automatic Precision Punching Press. Type: BSTA 110H. Max. Pressure: 1100 kN (110 T). Speed range: 100 – 800 spm. Year of production: 1976. Fitted with roller-gripper feed unit BBV 320/200 on left-hand side. Max. strip width: 400 mm. Max. strip thickness: 12 mm. Max. feeding pitch: 200 mm. Adjustable stroke: 16-75. Ram height adjustment: 89 mm. Max. Tool width clearance between columns: 1170 mm. Weight of machine: cca. 26000 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass.

Stationary high-pressure pump unit Hammelmann HDP 142 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 142 Operating pressure: 610 bar Flow rate: 78 l/min. Drive speed: 1500 rpm. Drive power: 86 kW with AC M 280 M-4/HE electric motor 90 kW, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,700x850x1,450 mm Weight: approx. 1,200 kg Year of construction: 2018 Condition: after service by Hammelmann in October 2020 only a few weeks run and for more than a year out of operation. In very good used condition.

Press capacity: 30 ton Ram stroke adjustable: 16 - 40 mm Slide adjustment: 40 mm Shut height (stroke down, adjustment up): 230 +/- 20 mm Free lateral opening F-B: 170 mm Table surface area : 480 x 450 mm Slide area: 250 mm Number of strokes: 100 - 600 s.p.m. Required power: 5,5 kW Dimensions L x W x H: 2.150 x 1.200 x 1.160 mm Weight of machine approx.: 2,5 ton

Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton

Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton

High pressure air compressor Belliss and Morcom High pressure air compressor Belliss and Morcom type: VH9H3N serial no. R188660 year of manufacturing: 2005 maximum working pressure: 40bar capacity: 580 m³ / h incl. pressure tank incl. cooling system / chiller

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 680 mm Free lateral opening F-B: 250 mm Distance between oil tray: 560 mm Table surface area : 640 x 450 mm Slide area: 560 x 350 mm Hole in table: 450 x 110 mm Number of strokes: 85 - 500 s.p.m. Table height over floor: 875 mm Required power: 7,5 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 5,8 ton

Press capacity: 250 ton Ram stroke adjustable: 20 - 200 mm Slide adjustment: 140 mm Daylight: 560 mm Table surface area : 1600 x 1000 mm Slide area: 1500 x 900 mm Number of strokes: 20 - 75 s.p.m. Free frontal opening L-R: 1680 mm Distance between the columns F - B: mm Table height over floor: 805 mm Die Weight total: 2700 kg Required power: 41 kW Dimensions L x W x H: 2850 x 2880 x 4395 mm Weight of machine approx.: 25 ton

Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW

Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton

High pressure compressor Atelier Francois CE 68 A Ateliers Francois Compressor Model: CE 68 A SG40 Year of construction: 2005 Capacity: 35 m³/min Pressure: 40 bar incl. cooler and pressure vessel The machine is still installed and in operation. It can be visited on site during production.

High pressure compressor Atelier Francois CE 68 A Ateliers Francois Compressor Model: CE 68 A SG40 Year of construction: 2006 Capacity: 35 m³/min Pressure: 40-42 bar Electrical power: 355 KW incl. cooler and pressure vessel The machine is still installed and in operation. It can be visited on site during production.

There are one CANNON A System 100 Pro and one CANNON A-10 System Servo available, year of construction machine 1/ 2: 1995/ 2002, including documentation.

Manufacturer: AIDA ENGINEERING LTD. Made in: Japan Presses are never used, condition is like new. Feeders and straighteners are available. Capacity: 80 tons Rated tonnage point: 6,5 mm Stroke: 200 mm Number of strokes per minute: 60-150 Bolster area (left-to-right x front-to-back): 1400 x 500 mm Slide area (left-to-right x front-to-back): 1400 x 500 mm Bolster thickness: 200 mm Distance between slide and bolster: 450 mm Slide adjustment: 50 mm Main motor: 45 kW Required air pressure: 5 kgf/cm² Total weight: 33 tons Roll feed Material width: 70=300 mm Material thickness: 0,25-0,4 mm Feed length: 50-120 mm Feed angle: 300-60 deg Uncoiler Coil diameter: 800-1200 mm

Vertical multistage high-pressure centrifugal pump GRUNDFOS As good as new pump, but part of the magnetic coupling was dismantled. Type CRN 10-09 MP-FGJ GI-V Year of construction approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Head: max. 91.8 meters Mains connection: 400 volts, 50 Hz Power: 3 kW - Pump construction in 9 stages - made of stainless steel 1.4401 - The new pump was used as a spare parts dispenser, but there are several new pump chambers - there is a part of the magnetic coupling missing suitable for drinking water supply, Irrigation and drainage Packed in the original wooden box Space requirement pump LxWxH 1100 x 250 x 300 mm Space requirement shipping box LxWxH 1400 x 330 x 340 mm Weight with shipping box 85 kg As good as new No submersible pump or submersible pump; used

Mechanical high-pressure machine vice ALLMATIC type HD 160 high-pressure clamp jaw width 160 mm jaw height 50 mm wingspan max. 302 mm clamping pressure max. 3.2 ton. Guideway height 85 mm - integrated turntable - clamping force preselectable in 4 steps, clamping pressure max 3.2 ton. - High-pressure clamp with mechanical power amplifier - span adjustable in 2 steps- lateral threads for workpiece stop- precise straightening grooves in the base surface for alignment on the machine table Dimensions: 600 x 160 x 140 mm Weight 58 Kg good condition; used

Hydro-mechanical high-pressure machine vice hydraulics high-pressure clamp SAFEWAY type PHV 160 Year of construction approx. 2010 jaw width 160 mm jaw height 58 mm clamping range: 0 to 315 mm Guideway height: 83 mm - clamping pressure max 6 ton. - 3 clamping ranges adjustable via plug-in bolts, 0 to 116mm, 95 to 215 mm and 195 to 315 mm- High-pressure clamp with hydraulic power amplifier - precise straightening grooves in the base surface for alignment on the machine table Text suggestion ready Ralf Dimension: 650 x 240 x 140 mm Weight 55 Kg good condition 4 pieces available, price per piece; used

NILFISK- Mobile cold water high-pressure cleaner-MC 2C-150/650 XT (POSEIDON 2-29 XT) Product Name: Mobile cold water pressure washer Type: MC 2C-150/650 XT (POSEIDON 2-29 XT) Manufacturer: Nilfisk Item number: 128470138 Year of construction: 2020 Condition: Brand new technical details: - Brass cylinder head - 3 x ceramic coated pistons - Automatic start/stop for long service life - Water volume regulation - Universal Plus lance with 4-in-1 nozzle - Steel-reinforced high-pressure hose - Removable 2 l detergent tank - Pressure: 150 bar - Pump speed: 2,800 rpm - Suction height (filled): 0.5 m - Cleaning effect: 2.9 kg/f - Water capacity qmax: 650/570 l/h - inlet temperature: 60 °C - electrical connection values: 230 V/1-phase/50 Hz/14.5 A - Power consumption: 3.3 kW - 5 m power cord - Hose DN6 15M on hose reel - Nozzle size: .0370 - integrated HD detergen ...

Schaal SEP 40 Automatic Punching Press. Year of manufacture: 1993. Completely revised in 2023 with new Siemens PLC control. Nominal capacity: 400 [kN] (40 [t]). Min./Max. number of strokes: 100 – 500. Ram adjustment: 70 [mm]. Variable stroke: 8 – 70 [mm]. Ram surface area: 340 – 300 [mm]. Stroke range: 8, 10, 15, 20, 25, 31, 36, 41, 46, 50, 54, 58, 61, 64, 66, 68, 69, 70 [mm]. Table dimensions: 550 x 580 [mm]. Fitted with gripper feeding device SZV 2. Width of strip: 8 - 120 [mm]. Feed length: 2 – 80 [mm]. Feeding thickness: 0.1 – 2 [mm]. Feeding: 180 [°]. Feed accuracy: ±0.01 [mm]. Drive power: 7,5 [kW]. Dimensions (H x W x L): 2300 x 1600 x 1400 [mm]. Weight: 3800 [kg]. Including operating instructions in German and English and schematics included. Also on stock high speed presses: Mabu, Schaal, Bihler and other Bruderer models. Also Ideal BAS welders

High-pressure filter ROEMHELD, HILMA, STARK 3887-087 FA144458 max. operating pressure: 350 bar max. flow rate: 50 l/min < br /> Filter capacity: 10 μm Filter material: Stainless steel Housing material: Stainless steel Connections: 1/4 ( inch ) Width across flats: 36 mm New ! Dimensions: 90 x 40 x 40 mm

High-pressure spray gun ECCO 370R 8611 4170 50 See also W550 ! New, with documents ! Dimensions( spray gun ): 280 x 120 x 60 mm Dimensions( packaging ): 280 x 120 x 60 mm

High Pressure 4-Way Ball Valve, Ball Valve, Hydraulic Valve PAGUS 4KH-15L L-10 Nominal pressure: 250 bar New ! Dimensions: 250 x 125 x 120 mm

High-pressure 4-way ball valve, ball valve, hydraulic valve FLUTEC KH5-15/12LR-1112 DN 16 Nominal pressure: 250 bar New ! Dimensions: 150 x 150 x 130 mm

High-pressure 2-way ball valve, ball valve RÖTELMANN DN 20 3/4 BSP St/POM/N Nominal pressure: 400 bar used ! Dimensions: 140 x 45 x 120 mm

High-pressure sodium lamp, 5 pieces 2x OSRAM VIALOX® NAV-T 400 W SUPER SON-T PLUS Power: 400 watts, voltage: 100 V < br /> 3x PHILIPS MASTER SON-T PIA PLUS 400 W E Power: 400 Watt, Voltage: 105 V Base: E40 length: 188 mm diameter (glass bulb): Ø 46 mm, length: 230 mm Total length: 280 mm New ! Dimensions( packaging ): 400 x 160 x 140 mm

High-pressure filter ROEMHELD, HILMA, STARK 3887-067 FA1803144 max. operating pressure: 350 bar max. Volumetric flow: 25 l/min Filter capacity: 10 μm Filter material: stainless steel Housing material: Stainless steel Connections: 1/4 ( inch ) New ! Dimensions: 54 x 30 x 30 mm

High-pressure filter, with electrical maintenance indicator MAHLE PUROLATOR Pi 420 ( PUROLATOR Pi420 ) Pi 4211-13 ( Pi4211-13 ) 77666514 400 bar 110 l/min with used filter cartridge ! Dimensions: 410 x 170 x 100 mm

High Pressure Mercury Vapor Lamp Pagus 700 W 220V, 5.45 A Trafo Q700.04.3M16 used, tested ! shade diameter: 570 mm height: 700 mm

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 Jaw width: 125 mm jaw height: 40 mm wingspan: 195 mm including a set of step jaws ! used, checked ! Dimensions: 460 x 190 x 140 mm

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 Jaw width: 125 mm jaw height: 40 mm wingspan: 195 mm including a set of step jaws ! used, checked ! Dimensions: 460 x 190 x 140 mm

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 jaw width: 125 mm jaw height: 40 mm wingspan: 185 mm including a set of step jaws ! used, checked ! Dimensions: 460 x 220 x 140 mm

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 jaw width: 125 mm jaw height: 40 mm wingspan: 195 mm used, tested ! Dimensions: 460 x 175 x 140 mm

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 Jaw width: 125 mm jaw height: 40 mm wingspan: 185 mm used, tested ! Dimensions: 490 x 180 x 140 mm