We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,849 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
High pressure compressor Atelier Francois CE 68 A Ateliers Francois Compressor Model: CE 68 A SG40 Year of construction: 2005 Capacity: 35 m³/min Pressure: 40 bar incl. cooler and pressure vessel The machine is still installed and in operation. It can be visited on site during production.
used
High pressure compressor Atelier Francois CE 68 A Ateliers Francois Compressor Model: CE 68 A SG40 Year of construction: 2006 Capacity: 35 m³/min Pressure: 40-42 bar Electrical power: 355 KW incl. cooler and pressure vessel The machine is still installed and in operation. It can be visited on site during production.
used
Manufacturer: AIDA ENGINEERING LTD. Made in: Japan Presses are never used, condition is like new. Feeders and straighteners are available. Capacity: 80 tons Rated tonnage point: 6,5 mm Stroke: 200 mm Number of strokes per minute: 60-150 Bolster area (left-to-right x front-to-back): 1400 x 500 mm Slide area (left-to-right x front-to-back): 1400 x 500 mm Bolster thickness: 200 mm Distance between slide and bolster: 450 mm Slide adjustment: 50 mm Main motor: 45 kW Required air pressure: 5 kgf/cm² Total weight: 33 tons Roll feed Material width: 70=300 mm Material thickness: 0,25-0,4 mm Feed length: 50-120 mm Feed angle: 300-60 deg Uncoiler Coil diameter: 800-1200 mm
used
Stand:8750x1100 mm/Trusses:2300 mm/Tray load: 2.4to Technical data for the pallet racking system: Shelving system: Polypal Type: Maxipal Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 21,800 mm Number of fields per row of shelves: 09 pcs á 2,300 mm Number of levels plus floor level: 05 pcs. Included in delivery are: 10x pallet rack stand, used Material color: blue Stand type: MXMO 5225P Stand profile: 110 x 83 x 2.5 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 8,750 mm high 1,100 mm deep 90x pallet rack trusses, used Material color: orange Box profile: 120 x 50 mm Traverse type: SKVBN11850NP22 Agraffe: 2 HK (hooks) Version: Head traverse Clear width: 2,300 mm load per pair of trusses 2,400 kg, with the same. distributed load 180x safety pins, ...
used
Stand:8750x1100 mm/Trusses:2300 mm/Tray load: 2.4to Technical data for the pallet racking system: Shelving system: Polypal Type: Maxipal Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 142,300 mm Number of fields per row of shelves: 59 pcs á 2,300 mm Number of levels plus floor level: 05 pcs. Included in delivery are: 60x pallet rack stand, used Material color: blue Stand type: MXMO 5225P Stand profile: 110 x 83 x 2.5 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 8,750 mm high 1,100 mm deep 590x pallet rack trusses, used Material color: orange Box profile: 120 x 50 mm Traverse type: SKVBN11850NP22 Agraffe: 2 HK (hooks) Version: Head traverse Clear width: 2,300 mm load per pair of trusses 2,400 kg, with the same. distributed load 1.180x safety pin ...
used
Röders RFM 760 - 2 HSC machining center, Year of construction 2001 / overhauled 2017, Röder's control, Travel X/Y/Z 760/550/400 mm , Spindle speed up to 42,000 rpm, HSK E 40, Table size 860 x 550 mm, Tool changer 28 times, B axis, filter system, Tool laser measurement,
used
High quality machine housing, 548 x 129 x 200cm hoch, KMS, mint condition -90% Special price ! If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. The parts have minor signs of disassembly. High quality machine enclosure, length 5480, width 1285, height 2000mm, Consisting of: - Total 12.24 running metres of enclosure, - High quality frame with removable panels, all top painted, - 2 large double doors without locking system with plexiglass, - The back consists of 7 removable elements of plexiglass and sheet metal - The top is made of plexiglass all round - The roof consists of slide-on frames with plexiglass edging. - The elements are all very strong and of high quality - Incl. the many machine feet and the ...
used
Air Pressure: 40 // Delivery Rate: 1320
used
Air Pressure: 42 bar
used
Travel distances: 415 x 340 x 355 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Control: Heidenhain iTNC 530 Table size X: 470 mm Table size Y: 400 mm workpiece weight: 500 kg Tool changer: 30 - fold Rapid traverse: 30 m/min electronic handwheel
new
Set of 3 high precision angular contact ball bearings, Spindle bearing, 7020 CD/P4ATBTG130, SKF, new Attention: Original SKF product - No replica from… Special price ! If you have a UID number, we will gladly issue an invoice without VAT. New! The part was bought from a spare parts store of a company and has never been in operation, is completely new. Function guarantee! For second hand parts, we can not provide a conventional warranty and guarantee. However, we do provide a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.
used
Patent high measure -Patent high measure -Operation manual -marking angle
used
The machine was completely overhauled by the manufacturer in 2006 and then only sporadically used to rework individual pieces. Machine has magnetic clamp which is mounted on electrically driven rotary table. Furthermore, a dressing device for the pot grinding wheel is available. Machine is in top condition.
used
Vertical multistage high-pressure centrifugal pump GRUNDFOS As good as new pump, but part of the magnetic coupling was dismantled. Type CRN 10-09 MP-FGJ GI-V Year of construction approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Head: max. 91.8 meters Mains connection: 400 volts, 50 Hz Power: 3 kW - Pump construction in 9 stages - made of stainless steel 1.4401 - The new pump was used as a spare parts dispenser, but there are several new pump chambers - there is a part of the magnetic coupling missing suitable for drinking water supply, Irrigation and drainage Packed in the original wooden box Space requirement pump LxWxH 1100 x 250 x 300 mm Space requirement shipping box LxWxH 1400 x 330 x 340 mm Weight with shipping box 85 kg As good as new No submersible pump or submersible pump; used
used
High current EMC filter SCHAFFNER type FS 20364-1200-99 3 phases, 3 x AC ballast, mains connection module, mains filter Input voltage: 3 x 400 VAC Input frequency: 50 / 60 Hz. Rated current: 3 x 1200 A Dimensions W x H x D: 135 x 260 x 235 mm Weight: 27.5 Kg very good condition, from stock resolution, unused 2 pieces available, price per piece; used
used
Mechanical high-pressure machine vice ALLMATIC type HD 160 high-pressure clamp jaw width 160 mm jaw height 50 mm wingspan max. 302 mm clamping pressure max. 3.2 ton. Guideway height 85 mm - integrated turntable - clamping force preselectable in 4 steps, clamping pressure max 3.2 ton. - High-pressure clamp with mechanical power amplifier - span adjustable in 2 steps- lateral threads for workpiece stop- precise straightening grooves in the base surface for alignment on the machine table Dimensions: 600 x 160 x 140 mm Weight 58 Kg good condition; used
used
used
Hydro-mechanical high-pressure machine vice hydraulics high-pressure clamp SAFEWAY type PHV 160 Year of construction approx. 2010 jaw width 160 mm jaw height 58 mm clamping range: 0 to 315 mm Guideway height: 83 mm - clamping pressure max 6 ton. - 3 clamping ranges adjustable via plug-in bolts, 0 to 116mm, 95 to 215 mm and 195 to 315 mm- High-pressure clamp with hydraulic power amplifier - precise straightening grooves in the base surface for alignment on the machine table Text suggestion ready Ralf Dimension: 650 x 240 x 140 mm Weight 55 Kg good condition 4 pieces available, price per piece; used
used
3 nos. Sulzer 16ZAV40S HFO fired generator complete power plant available in China. Running hour : 27,700-33,000 hrs
used
MAN 18V28/32S and H, HFO generator complete with auxiliary equipment. Rated power output : 3825KW - 4079KW, Year : 1997-2004, 10.5KV 50 Hz. Qty : 1- 6 units, buying any qty is welcome Good for mining project
used
X : 420 m Y : 350 mm Z : 200 mm 40.000 rpm Machine is in excellent condition
used
Cutting hours : 1200 saat Spindle speed : 20.000 rpm Control unit : Fanuc
used
X : 650 mm Y : 550 mm Z : 450 mm 20.000 rpm 1500 liters double head compressor Tool cabinet and hool holders come with machine
used
Matsuura FX1 for sale. Functional cnc milling maschine or for spare parts. Year 1995. Spindel 30000 rpm. With toolholders.
used
Machining center - engraver for high speed machining Spindle 3KW 55,000 revolutions tool magazine 9 Datron control positions bracketing table included.
used
High speed milling machine built in Sweden 1999. Has only worked with soft materials so it is in great condition.
used
Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) speed range 20 up to 10,000 rpm motor spindle with 52/42 kW (40/100%DC) tool taper HSK-A100 DIN 69893 tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate Working area 1Cross1100 mmLongitudinal2600 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight12 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // ...
used
GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z42000/42000/42000 mm/minRapid feed X / Y / Z42/42/42 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftCabineFull protection cabinSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)Rigid table with integrated rotary axis (leftside)Rigid table with integrated round table Ø 1050 mm // 41.3 in located left side of table table load max. 1,200 kg ...
used
Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal2600 mmCross1100 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical80/60/60 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight15 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² // ...
used
Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) tool clamping according to DIN 69872; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal2600 mmCross1100 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical80/60/60 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight15 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² // 16.4/ ...
used
High-performance fan Zenner, type VTZ 710/63/1 special, built in 2014, consisting of control cabinet, frequency converter, cell lock Specifications Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 Special Year of construction: 2014 Volume: 4.72 m³/s Temperature: 20°C Density: 1.2 kg/m³ Total pressure: 5,000 pa Speed: 2900 1/min Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 470 kg The fan is intended for transporting shredded paper/cardboard. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment. ...
used
Longitudinal X: 700 mm Cross Y: 400 mm Vertical Z: 360 mm Spindle speeds maximum: 10000 rpm Feed maximum: 10000 mm/min Positions ATC: 60 Positions APC: 2 CNC Brand: Fanuc CNC Model: Fanuc 16i MB 5 Axis machining center Loading FANUC Robot RARC mate 210iB Martin Mechanic workpiece product storage tower X - Travel: 700mm Y - Travel: 400mm Z - Travel: 360mm Table Ø: 1400mm Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Spindle Taper: Big PlusISO/Bt/Mk Power on ...
GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z80000/80000/80000 mm/minRapid feed X / Y / Z80/80/80 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftDynamic package for DMF 300|11 linearDynamic package for DMF 300|11 linear Linear motor X-axis with 80 m/min // 262.48 ft/min Rapid speed XYZ 80 m/min // 262.48 ft/min Acceleration XYZ 8 m/s² // 26.25 ft/s² Active cooling for Linear motorPackage Mill / Turn 12,000 rpm, HSK-A100Package Mill / Turn, 12,000 rpm HSK-A100 (Only available for Siemens 840D solutionline) NC-Mill-Turn-table d 1,050 mm ...
used
The all-rounder among the cutting machines with a plant air table of 3300mm. ER cuts veneer, PVC, solid plastic, polystyrene, acrylic, honeycomb structure sheets, papers, plastic films, cardboard, cardboard. Detailed description can be found on the homepage of the machine manufacturer
used
Stainless steel mixing tank with liftable, heated lid. Manufacturer: Essiccatore Granplast Type: AS2 Dimensions: 800 x 950 x 1900 mm Tank size: diameter 800 x 200 mm
used
Turbomixer: 200 litres, make: Henschel, model: FM200A, stainless steel, engine: 37/43 Kw 2-speed 1500/3000 rpm. Electrical panel.
used
offer 22493 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Tapping in steel ST 60 to M 42 - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1100 rpm - Right - Left rotation - 3 feeds 0.1 / 0.16 / 0.25 mm/rev - Projection 350 mm - distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.8 / 3.5 kW - Space requirement approx. W 600 x H 2050 x D 980 mm - Weight approx. 650 kg - with: - emergency stop button - - Lighting - Quick-change drill chuck 1 - 13 mm - Coolant device - Machine vice - div. 20 pcs HSS – twist drill 8 – 20 mm
used
Description Very well-preserved high-performance roller lathe WALDRICH SIEGEN. Refurbished in 2012 for € 595,000.00, with R&D control and functional guarantee. Details Type WKDF 900/15 Kop. Machine number 14183 Built in 1971 Bed width 1,610 mm Bed height 670 mm Bed length 7,670 mm Headstock center height 600 mm Face plate Ø 920 mm Clamping range 200 - 630 mm Support max. copying depth with largest turning diameter 250 mm Tailstock quill adjustment 100 mm Quilles Ø 300 mm max. workpiece length 4,000 mm max. workpiece weight 15 tons Additional Accessories Copying Device incl. documentation
used
Code 220406 Description of fast radial MK-4 Brand DONAU Type DR – 32 Machine r. 686 – 3 Year of construction ± 19.. Capacity in steel 60 32 mm Capacity in GG 45 mm Tapping in steel 60 M 26 Thread cutting in GG M 36 Spindle holder 4 MK Projection 900 mm Table 1200 x 600 mm Vertical movement of the boom 400 mm Spindle stroke 190 mm Spindle table min. – max. 80 – 650 mm 18 spindle speeds 31 – 1370 rpm Spindle feeds 0.1 – 0.15 – 0.2 – 0.3 mm/rev Power 1.5 / 2.2 kW – 380 volts Accessories tapping device Dimensions Br. x D x H 1200 x 1600 x 1910 mm Weight 1700 kgs Condition machine is in normal condition
used
Stand:6640x870 mm/Trusses:2880 mm/Compartment load: 1,6to Technical data for the pallet racking system: Shelving system: Hovuma Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 11,945 mm Number of fields per row of shelves: 04 pcs. á 2,880 mm Number of levels plus ground level: 04 pcs. The scope of delivery includes: 05x pallet rack stand, used Material color: cream white Stand profile: 85 x 50 x 17 x 3.0 mm Stand type: C 808 S275 Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( welded truss ) 6,640 mm high 870 mm deep 32x pallet rack trusses, used Material color: green INP profile: 80 x 42 mm clear width: 2,880 mm load per pair of trusses 1,600 kg at the same time. distributed load 64x locking pins, used Execution: compl. galvanized For securing the longitudinal ...
used
Stand:6640x870 mm/Trusses:2880 mm/Compartment load: 1,6to Technical data for the pallet racking system: Shelving system: Hovuma Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 26,770 mm Number of fields per row of shelves: 09 pcs. á 2,880 mm Number of levels plus ground level: 04 pcs. The scope of delivery includes: 10x pallet rack stand, used Material color: cream white Stand profile: 85 x 50 x 17 x 3.0 mm Stand type: C 808 S275 Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( welded truss ) 6,640 mm high 870 mm deep 72x pallet rack trusses, used Material color: green INP profile: 80 x 42 mm clear width: 2,880 mm load per pair of trusses 1,600 kg at the same time. distributed load 144x locking pins, used Execution: compl. galvanized For securing the longitudinal ...