high energy used for sale

Auction-ID: A3-43510-35527

Drilling capacity 45mm Table size : 1200 x 560 mm Drilling capacity 45mm Spindle Holder MK 4 Quill stroke 170mm Speed / Steps 70-2000 rpm Feed / Steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

One used guillotine Polar 78 ES year 1998

High Voltage Measuring Tip MTM, MESSTECHNIK MELLENBACH 20 kV ( 20kV ) Cable length approx. 0.4 m New ! Dimensions(packaging): 370 x 70 x 70 mm

8 motors with 8 fans Auction-ID: A7-45702-30

High Pressure Spray Gun ECCO 370R 8611 4170 50 See also W550 ! New, with Backing ! Dimensions ( Spray Gun ): 280 x 120 x 60 mm Dimensions( Package ): 280 x 120 x 60 mm

High-pressure mercury vapour lamp Pagus 700 W 220V, 5.45 A transformer Q700.04.3M16 used, tested ! Screen diameter: 570 mm height: 700 mm

Auction-ID: A3-43510-21292

3 motors with 3 fans Auction-ID: A7-45702-35

High-pressure filter, with electrical maintenance indicator MAHLE PUROLATOR Pi 420 ( PUROLATOR Pi420 ) Pi 4211-13 ( Pi4211-13 ) 77666514 400 bar 110 l/min with used filter cartridge ! Dimensions: 410 x 170 x 100 mm

bore capacity in steel (diameter):1-13 mm The machine has a 2.2 kW spindle motor with a 2-stage gearbox for drilling and tapping. Table size is 100 x 50 cm Stroke length approx. 200 mm

High Pressure Centrifugal Pump, Water Pump, Centrifugal Pump KSB Movitec VF2-1 Q = 2.2 m3/h H = 8.2 m Motor: 0.37 KW 240 / 400 V IP55 New ! Dimensions 480 x 260 x 220 mm

turning speeds:10000 U/min output:22 kw weight approx.:20 kg transmission ratio:1: 4,3 high speed spindle with 1 : 4,3 ratio, MK 5 spindle taper and collet chuck for tooling. Misc. parts in wooden case.

Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5

High Pressure Centrifugal Pump, Water Pump, Centrifugal Pump GRUNDFOS CRN3-3. G-V-HQQV Q =3 m3/h H = 15.1 m H max = 19.9 m P max 25 bar engine: 0.37 kW 380 / 480 V connection: 1 1/4 inch used, tested ! Dimensions: 370 x 210 x 450 mm

One used guillotine Polar 115EMC MON year 1994 with monitor programming sidetabes chromed table

Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7

Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

A used cutting machine Polar 92 E Year of manufacture 1996 Devices Air table Side Tables Display Program

small fine construction with 3 RPMs clockwise and 3 RPMs counterclockwise

AVK generator , alternator 2840 kva 400volt year 2008

Roller Door, Machine Protection Door, Quick Gate LABEX Type: 1000 Year: 2003 Door Width: 1600 mm Door Height: 1700 mm 1.3 kW 400 V used, tested ! Dimensions (transport): approx. 2150 x 900 x 500 mm

Key data: 40 mm, 900 mm

40 DONAU fully functional, Condition : well used

Five axis machining centre CME QUICK 200 CNC - 2000x1000x1300 mm, 18.000 rpm, CNC SELCA 4045PD, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2100x850 mm, Longitudinal travel x axis: 2100 mm, Cross travel y axis: 1000 mm, Vertical travel z axis: 1300 mm, Cnc: SELCA 4045 PD, Spindle motor power: 26 Kw, Spindle speed: 18000 rpm, Spindle taper type: HSK 63, Automatic tools change nr.: 20, Approx net weight: 18.000 kg, Accessories: Continuos round table 800 mm, coolant thrugh spindle 15 bar, electronic handwheel SELCA SILBOX 2, chip conveyor

Surface Grinding Machine JONES & SHIPMAN 540 X, capacity 450x150 mm, magnetic plate, dust extractor, OPT� �»¿ï»¿ï»¿ï»¿IDRESS E Factstor 2, Max working dimensions: 450x170 mm, Longitudinal travel x axis: 470 mm, Cross travel y axis: 171 mm, Clearance between worktable and spindle axis: 502 mm, Feed rate x axis: 2-25 m/1, Feed rate y axes: 0 - 1 m/1, Wheel speed: 2640 rpm, Wheel dimension: 200x20x31,75 mm, Spindle motor power: 1,5 Kw, Weight: 1.200 Kg, Accessories: Coolant tank, dust extractor, magnetic plate, OPTIDRESS E Factstor 2

• Conveying height 1,290 mm • Inlet height 620-780 mm • Tablet diam. 3-25 mm • Deduster path total length 15 m • Conveying capacity depending on tablet size 68,000-3,500,000 tablets/h • 2 inlet adapters: rectangular 115x80 mm and round with diam. 60 mm nozzle • Programme control C920 with HMI Allen-Bradley Panel View Plus 600 • Distributor V4000 with 6 outlets, automatic/manual change of outlets selectable via HMI • Metal check Lock Met 30+ with its own HMI • Bad ejection into glass container • PLC Allen-Bradley MicroLogix • Drive 100-240V/50/60Hz • Nozzle for dust extraction • Mobile

Pallet racking, as good as new 108 pitches Multiple available. Manufacturer: Jungheinrich Type: B Specifications: 10 stand frames, approx. 4,500 x 1,100 mm 36 supports, approx. 3,600 x K125 mm mm 72 locking pins Shelf load is 1,600 kg (with evenly distributed load). 2.773,11 € net plus 19 % VAT from stock 21698 Harsefeld. Subject to changes and errors. We are a professional provider – invoice with VAT indicated.

The scope of delivery includes: 01x Truss strut, new Manufacturer: Mecalux Material colour: sendzimir galvanised Overall length: approx. 1,218 mm Center-center hole: approx. 1,164 mm f. Frame profile width: 100 mm Ø drill hole: approx. 10 mm U-profile dimensions: 70 x 30 mm Material thickness: approx. 1.5 mm Weight: 1.78 kg | Pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

High precision protective film laminating machine Brand: Omma Type: PRO-J14_TF New machine Single machine (not integrated in a line) Workpiece dimensions: min. width 130 mm max. width 560 mm min. length 300 mm max. length 2.250 mm min. thickness 19 mm max. thickness 25 mm For application of self-adhesive film on the top of painted surfaces. Laminating rollers Ø 150 mm Working width 1.300 mm Max. workpiece thickness 80 mm Speed adjustable 5/25 m/min Working height (adjustable +/- 20mm) 905 mm Connected load kW 0.75 Integrated insertion/exit rollers Length (approx.) 300 mm Color RAL 7021 + RAL 2004 Operator side (in front of the machine, towards the entrance) right side Standard voltage v 400/50/3+N+T Max. Outer diameter of roller Ø 300 mm Inner diameter of roller Ø 76 mm Technical equipment: - High precision automatic cross cutting foil cutting  ...

Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton

The scope of delivery includes: 06x Steel panel, used Manufacturer: SSI Schaefer Total depth: approx. 960 mm Inner depth: approx. 955 mm f. Stand depth: 950 mm Total width: approx. 300 mm Material thickness: approx. 2.50 mm Material colour: sendzimir galvanised Frame profile: approx. 300 x 40 x 20 mm Weight|pcs.: approx. 7,940 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton

Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton

Pallet racking: yes, 1.Upright frame parts pcs.: 2, 1.Height mm Depth mm: 3300 X 650, 2.Upright frame parts Pcs.: 6, 2.Height mm Depth mm: 4060 X 650, 1.Crossbeam Pcs.: 24, 1.Crossbeam Length mm: 4000, Shelf load kg: ca 2000,

Manufacturer: unknown, Pallet rack: yes, 1.Upright frame parts pcs.: 2, 1.Height mm Depth mm: 2500/1100, 1.Crossbeam pcs.: 8, 1.Crossbeam Length mm: 2700, Shelf load kg: ca.1500,

Manufacturer: Venyeskob Bandpalettentrockner 5500/24, Type: Ven Dry Vertcal Bandpalettentrockner 5500/24/2-Zonen, Year: 2020, Control: Venyeskob, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 400-5500, Min.-max. workpiece height in mm: 110, Working widht max mm: 1300, Number of pallets: 24, Palettenausmass LxBxH mm: 6100 X 1500, Lichte weite Paletten: 200, Tragfähigkeit Palette kg: 250, Palettenausmass LxBxH mm: 6100 X 1500, Heizmedium Warwasser: yes, Year :2020

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

Operating pressure: 2800 bar, Flow rate: 27 l/min, Drive: Volvo Diesel, 160 kW, Operating hours: approx: 350h Trailer, incl. accessories,

Manufacturer: Emme Elle, Type: LBA 1350, Control: Emme Elle, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Fast exchange device: yes,

Jungheinrich ESE 20 high-speed electric pallet jack truck RA2397 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90074846 Battery change: 2016 TÜV: until 2023 Operating hours: 4267 h Fork length: 1930 mm Fork width outside: 540 mm Maximum load capacity: 2000 kg Lifting: 125 mm Travel speed 8.5-12.5 km/h Including: Instrument cluster and information and service display Quick charger 380V Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Manufacturer: Purete, Type: PRT-D2313, Year: 2020 neu, Control: HMI, Monting of the machine: Polierbürste/ Reinigungsbürste/Reinigungsbürste, Year: 2020 neu, Control: HMI, Number of units: 3, Diameter of brushes: 150 , Units mounted upright: yes, Working width mm: 1.320, Through running hight mm: 2 - 80, Feeding speed continous adjustable: 5 - 25, Required space L x W x H mm: 3.000 x 2.000 x 1950, Year :2020 neu

High-temperature chamber furnace with an operating temperature of up to 2,000 °C, including water cooling and sequence control with automatic valves. Usable space: 600 mm x 600 mm x 600 mm (= 220 l.), el. Power: 117 kW,

Manufacturer: Purete, Type: PRT-D2306, Year: 2020 neu, Control: HMI, Monting of the machine: Polierbürste/Bürste/Bürste, Year: 2020 neu, Control: HMI, Number of units: 1 + 2, Diameter of brushes: 150, Units mounted upright: yes, Working width mm: 620, Through running hight mm: 2 - 80, Feeding speed continous adjustable: 5 - 25, Required space L x W x H mm: 3.000 x 1.150 x 1.400, Year :2020 neu

Offer 25094 Specifications: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 60 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 225 mm - Drilling spindle speeds infinitely adjustable 35 – 950 rpm - Right - Counterclockwise rotation - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 360 mm - Max. distance from drill spindle to table / base plate 740 / 1220 mm - Table with 2 T-slots 700 x 590 mm Height adjustable via rack with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space requirement approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - with: - Emergency stop button -Lighting - Coolant device

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

For Sale: Hammelmann Aquajet 204 High-Pressure Pump Unit – Demo Model Model: Aquajet 204 Machine No.: C5.02204.1617 Year: 2025 Engine Power: 200 kW - 2150 RPM Pressure Rating: Up to 2800 bar - 40 l/min Plunger Diameter: 20 mm Oil Type: PAO ISO VG 320 Oil Quantity: 12.5 litres Condition: Demo model – very well maintained Current Hours: Approx. Less than 500 (still in use; hours may increase) Crankcase: Filled with high-quality synthetic oil (Shell Omala S4 GX 320) This unit is ideal for hydrodemolition, surface preparation, industrial cleaning, and other ultra-high-pressure applications. Still in operational use and available for inspection.

Manufacturer: Bauerrichter, Type: GPM 4, Year: 2013, Control: Programm, Software: Polierwalzen 4, Barcode: 3, Monting of the machine: 350, Year: yes, Number of units: yes, kW output motor: yes, Number of rotations controlled: ca.10.500, Units mounted upright: 1.300, Single table system mm: 2 X 1350 X 3200, Working table length mm: 100, Working table width mm: yes, Polierwalzen : yes, Diameter mm: yes, Disc sanding units: no, Fast exchange device: 8000, Automatical polish supply: yes, Required space L x W x H mm: Schaumstofscheiben 4/Hochdosierpistolen 3 Stück, Year :2013

Key data: 32 mm

Boom travel approx. 600 mm Distance table - spindle nose min. 250, max. 650 mm Quill stroke 190 mm Speed range: 18 speeds 41-1,850 rpm Drill feeds: 4 pieces ( from 0.1 - 0.3 mm/rev ) Work table 600mm x 1200mm Tool holder MK 4

For Sale: Hammelmann Aquajet 204 High-Pressure Pump Unit – Demo Model Model: Aquajet 204 Machine No.: C5.02204.1617 Year: 2025 Engine Power: 200 kW - 2150 RPM Pressure Rating: Up to 2800 bar - 40 l/min Plunger Diameter: 20 mm Oil Type: PAO ISO VG 320 Oil Quantity: 12.5 litres Condition: Demo model – very well maintained Current Hours: Approx. 500 (still in use; hours may increase) Crankcase: Filled with high-quality synthetic oil (Shell Omala S4 GX 320) This unit is ideal for hydrodemolition, surface preparation, industrial cleaning, and other ultra-high-pressure applications. Still in operational use and available for inspection.