hidro precis used for sale

Auction-ID: A1-41275-593

turning diameter over bed:100 mm turning diameter over slide rest:70 mm turning length:80 mm total power requirement:1,0 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,7 x 0,6 x 1,2 m facing lathe with manual feed, various accessories

turning length:140 mm dimensions of the machine ca.:4 x 2 x 1,9 m

Precision Column drilling machine with additional attachments, for precision metal and wood processing and model making. From the same manufacturer as proxxon. New but without packaging

Precision Column drilling machine with additional attachments, for precision metal and wood processing and model making. From the same manufacturer as proxxon. New but without packaging

Vaisala MI70 - Package with a lot of accessories. - MI70 - HMP76B,(chemical purged and sensor preheating), last calibrated on 29.11.2022 - HMP77B, (chemical purged and sensor preheating)last calibrated on 29.11.2022 -Suitcase -Charger - MI70SET - Carrying strap for the suitcase - 2 x 211302, Calibration Adapter Set for HMK15 Calibrator - 211339 Connection Cable for 300-Series - 219687 USB Instrument Cable - 219685 USB - RJ45 Adapter Cable - MI70 Link Interface Software - Calibration documents for each sensor from 29.11.2022 The device can be tried out before purchase by arrangement in 28844 Weyhe. Optionally, I can also offer recalibration from the manufacturer or an accredited test laboratory.

Precision wedge shoes AirLoc Load capacity 25,000 kg detached Insulating plate and anti-slip plate at the bottom Anti-slip plate on the top Overall height 88 mm in central position Adjustment range 13 mm Size 370 x 230 mm Weight 31.8 kg - New - unused - 21 pieces in stock Unit price

Precision wedge shoes BILZ - PKA 4 Payload 7,700 kg screw-on with insulating plate B4 Overall height 63 mm in central position Adjustment range +4 / -6 mm Size 200 x 200 mm Female thread M20 Weight 9.5 kg - New - unused - 6 pieces in stock Unit price

Precision Series Limit Switch EUCHNER

Precision Caliper FEINMESSZEUGFABRIK SUHL 0 - 40 mm 0 - 50 mm in protective box use, tested ! Dimensions: 200 x 170 x 30 mm

Precision spirit level, control spirit level HEINRICH ERB KG 200 mm Accuracy: 0.02 mm / m in wooden box Dimensions: 235 x 235 x 55 mm

Precision spirit level, control spirit level VEB KONTROLL - DIRECTIONAL SCALES KARL - MARX - STADT 200 mm Accuracy: 0.02 mm / m in wooden box Dimensions: 235 x 235 x 55 mm

Precision spirit level, control spirit level VEB KONTROLL - DIRECTIONAL SCALES KARL - MARX - STADT 150 mm Accuracy: 0.05 mm / m in wooden box Dimensions: 180 x 180 x 60 mm

Internal measuring instrument, fine indicator Internal measuring instrument FEINMESSZEUGFABRIK SUHL 10 - 20 mm in wooden box Dimensions: 305 x 110 x 60 mm

Precision measuring device, tripod with measuring screw CARL ZEISS JENA 0 - 25 mm scale width: 0.01 mm DIN 863/1 Dimensions: 155 x 115 x 70 mm

Precision spirit level Längenmesstechnik Limbach 200 mm Accuracy: 0.02 mm/m in wooden box Dimension: 230 x 220 x 55 mm

Combined precision rolling bearing, axially preloadable, needle-axial cylindrical roller bearing NADELLA ARNB 70130 ( ARNB70130 ) INA No. ZARN 70130 TN ( ZARN70130TN ) Shaft diameter: Ø 70 mm Outer diameter: Ø 130 mm Bearing thickness: 82 mm New ! Dimensions (packaging): 150 x 150 x 110 mm

Combined precision roller bearing, axially preloadable, needle-axial cylindrical roller bearing NADELLA ARNB 55115 INA No. ZARN 55115 TV shaft diameter: Ø 55 mm Outer diameter: Ø 115 mm bearing thickness: 82 mm New ! Dimensions (packaging): 135 x 135 x 110 mm

Precision face and boring chuck WMW A 100 - 4 ( A100-4 ) TGL 32680 ( TGL32680 ) Dimensions: 210 x 100 x 85 mm

Combined precision rolling bearing, axially preloadable, needle-axial cylindrical roller bearing NADELLA ARNB 45105 INA No. ZARN 45105 TV Shaft diameter: Ø 45 mm Outer diameter: Ø 105 mm bearing thickness: 82 mm New ! Dimensions (package): 125 x 125 x 110 mm

Surface Grinding Machine JONES & SHIPMAN 540 X, capacity 450x150 mm, magnetic plate, dust extractor, OPT� �»¿ï»¿ï»¿ï»¿IDRESS E Factstor 2, Max working dimensions: 450x170 mm, Longitudinal travel x axis: 470 mm, Cross travel y axis: 171 mm, Clearance between worktable and spindle axis: 502 mm, Feed rate x axis: 2-25 m/1, Feed rate y axes: 0 - 1 m/1, Wheel speed: 2640 rpm, Wheel dimension: 200x20x31,75 mm, Spindle motor power: 1,5 Kw, Weight: 1.200 Kg, Accessories: Coolant tank, dust extractor, magnetic plate, OPTIDRESS E Factstor 2

Licon LiFLEX II i³ 766 DT B22 Precise mechanical machine Operating hours: approx. 40,148 h power: 150 KW The LiFLEX II i³ 766 sets new standards with its groundbreaking i³ technology, which combines two spindles in one machine. With double spindles and maximum accuracy, it enables a stable and precise machining process like never before. Thanks to independently adjustable motor spindles in the Z axes and a 5-axis configuration, this machine offers maximum performance in every operation. The generous spindle distance of 750mm and the generous working area of ​​X 750 Y 660 Z 650 enable the machining of a wide range of workpieces with ease. Temperature sensors with innovative algorithms reduce the influence of different temperatures on the positioning accuracy of the motor spindles, while the Watt Pilot ensures reliable drill breakage control. The LiFLEX II i³ 766 is not onl ...

small fine construction with 3 RPMs clockwise and 3 RPMs counterclockwise

Precision slide guides roller bearings Travel 150 mm Carriage width 75 mm Height 32 mm Threaded spindle M8 x 1with cross crank and scale Scale 0.1 mm Load capacity approx. 1.5 kg Space requirement L - 380 mm x W - 75 mm x H - 32 mm Weight approx. 3.6 kg -Unit price-

Sell some machines from our warehouse

Precision cutting unit IMA Type: 08.376

Unit for grooving / precision cutting Make: IMA

High precision protective film laminating machine Brand: Omma Type: PRO-J14_TF New machine Single machine (not integrated in a line) Workpiece dimensions: min. width 130 mm max. width 560 mm min. length 300 mm max. length 2.250 mm min. thickness 19 mm max. thickness 25 mm For application of self-adhesive film on the top of painted surfaces. Laminating rollers Ø 150 mm Working width 1.300 mm Max. workpiece thickness 80 mm Speed adjustable 5/25 m/min Working height (adjustable +/- 20mm) 905 mm Connected load kW 0.75 Integrated insertion/exit rollers Length (approx.) 300 mm Color RAL 7021 + RAL 2004 Operator side (in front of the machine, towards the entrance) right side Standard voltage v 400/50/3+N+T Max. Outer diameter of roller Ø 300 mm Inner diameter of roller Ø 76 mm Technical equipment: - High precision automatic cross cutting foil cutting  ...

turning diameter over bed: 250 mm turning diameter over slide rest: . mm centre distance: ca. 400 mm centre height: ca. 125 mm turning speed range: 80 - 3000 U/min number of speeds: 18 spindle bore: 24 mm tailstock quill taper MT: 3 weight: ca. 400 kg dimensions: ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter: 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws, collet chuck device incl. collets 1-20 mm (exept 5 and 10 mm) with 1 mm gradient Multifix size A with 3 interchangeable holders, chuck protection with shutdown The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. cutting height: 100mm, saw blade diameter: 250-400mm, bore: 30mm, carriage length: 2600mm, motor power: 5.5kW, length: 3100mm, width: 2400mm, height: 1500mm, weight: 770kg. On-site inspection is possible.

Wheel diameter: 680 mm sawblade length: 8550 mm Sawblade width max.: 1,3 mm Cutting height: mm Motor output: 20 kW Table dimensions: 600 x 620 mm Feed speed: m/min. Machine height: mm Weight: 10.000 kg Bandsaw horizontal, Precision-Saw for Silicon (Solar industry) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala.

Milling machine DECKEL FP3 - 500x300x400 mm, DRO, Information about technical data are not binding., Machine available subject to prior sale, Working table size: 800x420 mm, Longitudinal travel x axis: 500 mm, Cross travel y axis: 300 mm, Vertical travel z axis: 400 mm, Spindle taper: 40 SK, Spindle speed: 40 - 2000 rpm, Number of spindle speeds: 18, Spindle motor power: 3 Kw, Quill spindle travel: 100 mm, Working feed x-z axes: 5 - 500 mm/1, Rapid feed x-z axes: 1.500 mm/1, Number of working feeds: 18, Weight: 1.200 Kg

Cross table with stepper motor drivePrecision positioning systems UHLCrope table UHL type KT5-NSOCSerium No. 0008002Table size: 145 x 145 mmTable opening: 75 x 75 mmOverall height: 51 mmTravel distance: 50 mm per axisStraightness / flatness: 5 ?m- Drive per axis via 2-phase hybrid stepper motor, type ZSS 33.200.1,2- Manual adjustmentDimensions (cross table) L x W x H: 265 x 220 x 51 mmWeight: 3.5 kgvery good condition; used

Klaaßen SDM15-5 turning machining centre, The top lathe we offer has the following in the basic configuration Technical parameters: ▪ SDM 4-5 CNC 4-Panel Bed Precision Lathe - Z-travel (slide longitudinal)= 5,000 mm (6,000 with TAE3) X-travel (face slide transverse)= 1,000 mm Y-axis (vertical movement)= 350 mm Maximum workpiece Ø = 1,500 mm Circulation diameter over face slide = 1,500 mm - Center width = 4,500 mm (5,500 with TAE3) ▪ CNC machine designed as a 4-lane tip lathe with full drive-over of the Bezels and superstructures - - - Cross slides and face slides restrict the diameter range by lateral arrangement on the lathe bed. As a result, there is no accompanying Diameter restriction above the face slide/tool carrier. Cross slide unit can be fully attached to the steady rests, HSSL and tailstock. This significantly reduces the set-u ...

Batch mixer for the production of chemical products, foodstuffs, building materials, plastics, animal feed, etc., max. usable volume: 2,000 l., parts in contact with the product made of stainless steel 1.4301 (AISI 304), mixing unit drive 30 kW (with external fan), equipped with 2 cutting rotors (18.5 kW each), 2 liquid lances for injection directly onto the cutting rotors and pneumatic spiral cleaning. Emptying via pneumatically operated bottom flap. The scope of supply also includes: control cabinet with frequency control for the mixing unit (0.25 to 2.8 m³/s circumferential speed), weighing frame with 4 load cells, 4 machine feet to raise the mixer body, jet-cleaned cartridge point filter with 4 m² filter area and 3 kW blower (ATEX, 2,580 m³/h air flow), silencer, water dosing and technical documentation. Available for an extra charge: Suitable frame for filling the mixer  ...

Memmert Precision Incubator 256 litres Manufacturer: Memmert Model: ICP 600 Temperature: 0°C to 60°C Volume: 256 litres Power: 700 W Interior width: 800 mm Interior height: 640 mm Interior depth: 500 mm Device width: 958 mm Device height: 1335 mm Device depth: 656 mm Max. number of slide-in plates: 7 Max. load per slide-in plate: 30 kg Max. load per device: 80 kg Weight: 144 kg More items - new and used - can be found in our shop! International shipping costs on request!

Precision planetary gearbox, i=8, PLFHP140-008-SSSE3AK-E38, Neugart, new Attention: This is an original product from Neugart and not a replica from Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! The part was purchased from a spare parts warehouse of a company, is in its original packaging, has never been used and is completely new. Drive side: Hollow shaft D 50mm, centering 180mm, pitch circle 215mm, z=4, 6 months warranty We give you a 6-month warranty for these goods from the date of invoice. In the event of a defect that is not the fault of the buyer, the goods can be returned. We will only refund the buyer the price of the product paid to us. Updating in the case of digital components is excluded. Liability for direct and indirect consequential damage is also excluded. Our terms and conditions apply, see our websit ...

Conventional precision lathe WEILER "CONDOR VC" With 3 axis digital display Siemens Year of Make: 2012 Spindle bore: 56 mm Center width: 800 mm Circumference Ø over bed : 205 mm Speed range: 30 – 3500 rpm With the following accessories: Multifix Tool Holder Chip backsplash wall with interior lighting Coolant Setup 3 jaw chuck 0 200 mm Feed protection Moving Lynette 0 approx. 150 mm Tailstock with extendable drill quill Operating instructions

Manufacturer: Mitutoyo Model: CRYSTA-APEX S544 Year of Manufacture : 2019 Type of Machine : 3D CNC Coordinate Measuring Machine Measuring range : 500 × 400 × 400 mm Resolution: - 0.0005 mm Drive: - CNC control, servo motor drive Maximum Drive Speed: - 3-axis simultaneous: 20–30 mm/s (depending on model) Accuracy (per ISO 10360-2): Probe used: TP200 - E0, MPE: Approx. 1.7–2.2 µm (varies by model and temperature) Machine Weight: - S544: approx. 1135 kg Power Supply: - 100–240 V AC, 50/60 Hz Find more here - / Contact us at -

Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts.

High-precision lathe DMG Mori Wasino G 100/480 Year of Make: 2017 Control: Fanuc COMPACT line Temperature response (cold start): ø 2.0 μm Roundness: 0.5 μm Technical data: Spindle speed: Drive power: Turning diameter: 285mm Turning length: 280mm Bar Passage: 38mm Travels: X-axis: 480mm Z-axis: 285mm Accessories - 3 pcs of powered tools - Package rigid tool holders - Fire extinguishing system - machine only ran under oil - Chip conveyors

High-precision 5-axis micromachining system MICROMASTER 5X-L – very good condition For sale is a high-precision 5-axis micromachining system MICROMASTER 5X-L, which was purchased in 2017 and has since been used exclusively for research and development projects. Accordingly, the condition of the facility is very good, with careful use and careful maintenance. The machine is ideal for demanding applications in micro and precision machining, prototyping and research and development. Facilities of the facility: 1. General information • Basic machine: MICROMASTER 5X-L • Machine type: 5-axis micromachining center • Design: Ultra-precision machine for research, development and high-precision manufacturing tasks ________________________________________ Kinematics & Precision • Hydrostatic turn/swivel unit for maximum positioning and repeatability • Travels: o X- ...

Leg length approx. 400 x 600 mm, accuracy DIN 875, in transport crate Auction-ID: A1-44702-162

Precision vise RÖHM 750 mm, wooden box

Equipped with, among other things: Three-point device, 2 crumbling rollers, 3 reels for drip hose irrigation and pressure rollers. Auction-ID: A1-43573-96

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck 6 pieces -Photography: see photos -Size: 51 to 79 mm, see photo parts list -Dimensions: Ø 88 x 120 mm -Submission/Price: complete -Transport dimensions: 270/180/H125 mm -Weight: 6.6 kg

Step chucks, precision chucks, bell-shaped collets, collet sleeves, collets, tool holders, tool holders, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck 3 pieces -Photography: see photos -Size: 83 to 110 mm, see photo parts list -Dimensions: Ø 120 x 120 mm -Submission/Price: complete -Transport dimensions: 360/120/H120 mm -Weight: 4.2 kg