heuft karl heuft used for sale

Karl Hertel Bending Bench / Round Bending Machine Kombi - Width: 150cm - Depth: 90cm - Height: 120cm - Weight: 350kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Type Cutters Height 1900 Width 700 mm Length 1300 mm Weight 270 kg Voltage Electrical: 400V 50Hz 3N Installed Power 11 kw Main material Stainlees Steel Cutter Type Emulsifier Knife shaft revolutions 2900 rpm

Absorption Refrigerator System with cooling tower Karlsruhe KRD 1/12-28-3. Cooling output: 214kW, permissible temperature: 10-60°C, max. overpressure: 1bar, nominal volume flow: 87.1m³/h, with Radial Fan Wolter GmbH TRZ 900/80 KTK and Absorption Chiller Carrier SCS 16LJ-03E-LC.

Load: 18t, lifting height: 10,750mm, span: 23,000mm, weight: 35.1t, machine was regularly maintained and inspected.

Product number: 1998B Townsend MasterFormer Type: TA1521 Serial number: 10080439 Year of construction: 2010 Stork MasterFill Type: MTFII Serial number: 0441010 Year of construction: 2010 Stork Master Slice Type: DRST Serial number: 0420410 Year of construction: 2010 Caliber: 50 mm Karl Schnell vacuumfiller Type: P10SE, 596P Serial number: 22045 Year of construction: 2010 Power: 3 x 400V, 50Hz, 10.9kW Weight: 1180 kg Risco vacuumfiller Type: RS303 Serial number: T310021 Year of construction: 2010 Power: 3 x 400V, 50Hz, 7.7kW Weight: 830 kg With RS70 grinding head

Tensile testing machine Manufacturer: Karl Frank GmbH Type: 81559 Year of construction: 1980 Duck test: height: 1000mm, width: 400mm, depth ungraenzt Force ranges: 2000N, 1000N, 500N, 200N, 100N, 50N Original price at that time: 49.855,00 DM ATTENTION: The device has not been tested for functionality. All information without guarantee

Feeding puller DAUB Heuft Hein thermal oil stovePuller with trolley DAUB thermal oil stoveTotal external dimensions: W.: 159 cm , D.: 89 cm , H.: 196 cmPull-off dimensions: W.: 75 cm , D.: 158 cm , H.: 4 cm4 pieces we have in stockDetails see picture

Type 012 F86 completely stainless steel 5.6 kW 30 L. funnels Capacity: 800 kg/h Dimensions (L x W x H) : ± 970 x 430 x 1,520 mm

Universal cylindrical grinding machine make WMW Karl-Marx-Stadt type SU 315 x 1500Machine -No: 8486Technical specifications:Largest swing diameter: 315 mmLargest grinding length: 1500 mmLargest workpiece mass: 300 kgLargest diameter grinding wheel: 630 mmlargest width: 200 mmBore: 305 mmGrinding spindle speed at V = 35 m / s. : 1060/1200/1400 rpm. at V = 50 m / sec: 1500 rpm.Connected load: 12.6 kWWeight approx: 5.8 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Complete stainless steal Capacity: 1600 liters Basket dimensions: 190x105x80cm Dimensions of the machine: 340x100x180cm Delivery time: 30 days after advanced payment

Universal cylindrical grinding machine make VEB Karl-Marx-Stadt type SU 240 x 800Machine -No: 2449 Year 1957Grinding diameter: 240 mmGrinding length: 800 mmDrive power: 4 kWWeight: 2.6 tExternal dimensions: 3000 x 1650 x 1700 mmwithout internal grinding deviceWith- Cabinet mounted on the side of the machineused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2 STATIONS BRONSHING (RAEUMMASCHINE) Year of construction 2001 great condition

various twin press impregnation, plate size ~32cm x 45cm, a good condition, immediately available

Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of construction: 1990 Machine no.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outdoor clearing Pulling force: 25.000kg Cutting speed: 7.2 / 8.1 / 9.6m/min Maximum tool length: 3520mm Passage width: 520mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12.300 x 6.400 x 4650mm Power Supply: 380V 50Hz/110kW Accessories/ Special equipment: - 6 tool carriers for tool change - Machine documentation Remark / General The machines are in good condition. The machines are dismantled with us in the Bearing. The total volume of the plant comprises several trucks (approx. 70 tons per machine). The machines have produced connecting rods for passenger car diesel engines. Chain scrapers are designed for use in mass production. The continuous ( ...

Universal - Register punch Karl Tränklein - Type.: USM 900 - Year of construction: 1992 - Masch. Product no.: 1745 - Table size: 900 x 600 mm - Insert height: max.- 80 mm - with several punching heads

Impact scissors Karl Krause "ROBUST" Ma. No. : 3142 Cutting width: 112 cm Table: 72 x 114 cm 2 adjustable stops Knives sharpened Weight: 360 KG Tested and cleaned / Functional

Can filling line capacity: approx. 24,000 cph Filling Product: Soft drinks Can size: 330 ml and 500 ml standard cans Can Type: 211/202 consisting of: 1. Can depalletizer King with automatic can infeed system with Siemens S7 PLC including can table, pallet magazine, sheet removal system the depalletizer is fixed for the following pallet dimensions: 1.180 x 1.250 mm 2. Can rinser Transtech Hysek to rins new cans with filtered water infeed height: approx. 2,500 mm Outfeed Height: approx. 1,200 mm 3. Can filler and seamer KHS / Ferrum - Filler Innofill EMD 76 with 76 filling valves blocked with - Can seamer Ferrum type: F708G with 8 seaming stations the filler and seamer will be complete reconditioned in our workshop including new electric control panel with PLC Siemens S7 including Danfoss frequency inverter including beer pressure regulating valve including CIP  ...

Karl Schnell KS P9 vacuum filling machine, performance max. 3200 kg/h, filling pressure max. 22 bar, portioning size 1 g - 1000 kg, portioning speed max. 700 port./min, hopper cappacity 300 liters

AUTOMATIC PROCESS MACHINE FOR LIQUIDS FOODS, KARL SCHNELL TIPO: 250 Technical description: Machine number: 25162 Year: 2001 Two knives Nominal volume: 300L Dimensions: 1500 x 1150 x 2350 mm QUALITY HAS A NAME Customers demand equipment that meets their individual requirements and they demand machines that produce a high quality end-product at lowest possible costs. Combining these fundamental considerations with technical know-how, KS builds machines that are simple to use and extremely durable. Main application field of the B 22 is the production of low to middle viscous emulsions and suspensions. Typical applications are the production of: Soup, sauce and gravy Ketchup aund mayonnaise Fish farce Injection brine Pate and tureen As well as The reconditioning of rework The preparation of process materials, such as additives and spices for the sausage-, petfood- and processed cheese p ...

Karl Schnell B22 Process Automat Typ 250, suitable for the production of low to middle viscous emulsions and suspensions, such as Soup, sauce and gravy, Injection brine, preparation of process materials, etc, power supply 3AC 400 Volt, 50 Hz, 52 Ampere, 26 kW.

2 LITRE PET LINE at 10,500 BPH KRONES BLOC WITH IPANEL (Yr 2010) - 70 FILLING HEADS- 12,500 BPH MAX SPEED SIDEL SBO8 BLOW MOULDING AIRVEYOR COOLING CONVEYOR KRONES AIRCO INFEED CONVEYOR KRONES CARBONATOR (2010) HEUFT INSPECTION (2012) KRONES CONTIROLL LABELLER (2012) SMI DIVIPACK & SMI OVERWRAPPER KHS HANDLE ATTACHMENT LOGOPACK PACK LABELLING ACMI PACK SORTING & ROBOT PALLETISING FANUS PACK HANDLING ROBOT TOSA PALLET WRAPPER LOCATION: UK The line is installed in the factory and inspections are most welcome. The machinery is in good working condition and ready for engineering removal. We can provide the full installation service if required. Please contact Indassol today for a quote!

cascade separator, vibrating chute, vibrating conveyor, vibrating chute, vibrating chute used Manufacturer: KARL MERZ AUFBEREITUNGSTECHNIK Type: ULA 570/50-650 built: 1987 Gutter approx. 500 x 1000 mm 2 vibrators each 0.84 kW Overall dimensions approx. 1300 x 1300 x 1400 mm e.g. For the separation of granules with shape defects, e.g. angel hair, double granules This cleaner was used for plastic granules. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Bandsäge Karl Müller Cutting width 70 cm Cooling 2 cutting speeds Weight 400 kg Length 2 m Width 0.80 m Height 1.20 m

Plunger pressure 4 t Stroke rate 70 / min

Centrifugal fans, centrifugal blowers, radial high-pressure fans with belt drive ELEKTROR Karl W. Müller Type: HRD 2/4 T Speed fan wheel: max. 5200 rpm Fan diameter: Ø 350 mm Induction: Ø 110 mm Output: Ø 10 mm Motor : no nameplate ! approx. 3.0 kW tested with 380 V 3 AC 50 Hz used, tested ! Dimensions: 600 x 520 x 600 mm

KARL SCHNELL KS ultra-fine shredder Type: FD 225 2 plate system with handwheel adjustment Engine: 90 kW Completely overhauled

Overview  The glass bottle filling line was manufactured in 2022 and in use in a brewery in Spain. As the owner is now shifting his production to a contract bottler due to increased volume, this line is for sale. Plant in detail  Robot depalletizer | Kuka (Nownology) | KUKA KR 470 PA | 2022  Capacity: 15,000 bph Weight: 470 kg  Isobarometric Filler | Nagema | 40/10 | 1990 Completely overhauled/modernised and also equipped with a new control system in 2022 Unused since overhauling  Capacity: 9000 bph on 330 ml Number of filling valves: 40 Number of capping elements: 10 Formats: 330 ml and 500 ml Products: beer and CSD Control: Siemens S7 with touch panel Fill level inspection | Heuft | --- | 2022 2x Labeller | ENOS | S5000 | 2022 for self adhesive labels Capacity: 5,000 bph Self-adhesive labels  Number of labelling stations: 3 Length: 2.850mm Width: 1.500mm Height: 2.000mm Weig ...

Centrifugal fan, centrifugal fan, centrifugal fan ELEKTROR, KARL W. MÜLLER Type: D 1 ( D1 ) Fan wheel diameter: Ø 24 mm 5 m3/min 1,0 kPa Motor : 0.12 kW 2750 rpm 220 / 380 V 3 AC 50 Hz IP44 Ø 82 / 110 mm Output flange: Ø 65 / 1115 mm bolt circle diameter: 96 mm, 4x bore: Ø 10.2 mm fan base: 158 x 120 mm used, tested ! Dimensions: 320 x 240 x 330 mm

Centrifugal fan, centrifugal fan, centrifugal fan ELEKTROR, KARL W. MÜLLER Type: D 4 ( D4 ) Fan wheel diameter: Ø 340 mm 11,3 m3/min 2.0 kPa Motor : 0.5 kW 2800 rpm 230 / 400 V 3 AC 50 Hz IP54 Intake connection: Ø 110 / 128 mm outlet flange: Ø 80 / 130 mm bolt circle diameter: 112 mm, 4x bore: Ø 11.2 mm fan base: 230 x 190 mm used, tested ! Dimensions: 430 x 340 x 470 mm

Vacuum pump, side channel blower, side channel vacuum pump ELEKTROR Karl W. Müller SD 6 ( SD6 ) 4,6 m3/min 300 mbar Connection flange: Ø 54 / 100 mm bolt circle diameter: 84 mm 4x threaded hole: M6 x 1.0, depth: 10 mm per flange pump base: 348 x 198 mm hole spacing: 310 / 160 mm hole diameter: Ø 12.5 mm motor: 2.3 kW 2870 rpm 230 / 400 V 3AC 50 Hz IP54 used, tested ! Dimensions: 440 x 400 x 420 mm

Vacuum pump, side channel blower, side channel vacuum pump ELEKTROR Karl W. Müller SD 6 ( SD6 ) 4,6 m3/min 3000 mm WS ( approx. 294 mbar ) Connection flange: Ø 55 / 102 mm bolt circle diameter: 85 mm 4x threaded hole: M6 x 1.0, depth: 10 mm per flange pump base: 350 x 198 mm hole spacing: 310 / 160 mm hole diameter: Ø 12.5 mm motor: 2.4 kW 2800 rpm 220 / 380 V 3AC 50 Hz used, tested ! Dimensions: 425 x 400 x 425 mm

Overview Most of the equipment, which belongs to this brewery, was manufactured in 2021 and 2022. There are several components which have never been used. The owner had purchased all the equipment to set up a micro brewery but then decided to shift the production of his beer to a bigger brewery, producing for him. Therefore all the equipment is for sale. List of components Manufacturer: Bühler AG Machine Type: malt mill Model: Smartgrist YOM: 2022 (used since February)   Manufacturer: Spadoni Machine Type: 25 hl brew house Model: RMB 2500 YOM: 2022 (not used yet) Capacity: 25 - 30 hl in one brewing process, two processes possible in ten hours   Manufacturer: ABC Perello Machine Type: steam generator Model: PMY - 12 YOM: 2022 (not used yet) Capacity: 1250 Kgv/h   Manufacturer: --- Machine Type: water softener Model: --- YOM: 2022 (used since January)   Manufacturer: Isma S.A. Machine ...

Centrifugal fan, centrifugal fan, centrifugal fan ELEKTROR Karl W. Müller Type: D - 07 Speed fan wheel: 2850 rpm Fan wheel diameter: Ø 180 mm Volumetric flow: 41 m3/min Total pressure difference: 1.1.1 2 kPa ( 0.012 bar ) Induction: Ø 180 mm with intake housing 330 x 198 mm Output: 170 x 150 mm Flange ( outlet ): 210 x 192 mm hole spacing: 160 / 180 mm hole diameter: Ø 10,5 mm Motor : 1.8 kW 2850 rpm 220 / 380 V 3 AC 50 Hz IP44 used, tested ! Dimensions: 640 x 380 x 360 mm

Transformer, transformer BTK, TRANSFORMATORENBAU KARL-MARX-STADT Type DT D1 TGL 200-1764 1,1,0 kVA Primary: 220 / 380 / 420 V 3 AC 50 / 60 Hz Secondary: 16 / 19 / 20 V 3AC 29.0 A IP00 used, checked! Dimensions: 135 x 100 x 200 mm

Centrifugal fans, centrifugal blowers, centrifugal high-pressure fans with belt drive ELEKTROR Karl W. Müller Type: HRD 60/3 Speed fan wheel: max. 5900 rpm Fan wheel diameter: Ø 350 mm Induction: Ø 120 mm Output: Ø 80 mm V-belt pulley ( fan ): Diameter: Ø 80 mm, 2 grooves, groove width: 10 mm Motor : ATB, FLENDER, LOHER Type: A 112M/4/2C-11 3,7 / 4,7 kW 1440 / 2900 rpm 380 V 3 AC 50 Hz IP55 V-belt pulley ( motor ): Diameter: Ø 145 mm, 2 grooves, groove width: 10 mm used, tested ! Dimensions ( fan ): 550 x 320 x 580 mm Dimensions ( motor ): 400 x 280 x 240 mm

Transformer, transformer BTK, TRANSFORMATORENBAU KARL-MARX-STADT Type DT D016 TGL 200-1764 0,16 kVA Primary: 220 / 380 / 420 V 3 AC 50 / 60 Hz Secondary: 16 / 18 / 20 V 5.1 A IP00 used, checked! Dimensions: 150 x 90 x 165 mm

Precision spirit level, control level VEB CONTROL - STRAIGHTENING SCALES KARL - MARX - STADT 200 mm Accuracy: 0.02 mm / m in wooden box Dimensions: 235 x 235 x 55 mm

Gear pump, lubrication pump, single-flow, with internal bearings ORSTA, INDUSTRIEWERKE KARL-MARX-STADT HPf 0,63 ( HPf0,63 ) TGL 17-G G Flow rate ( V ): 0.5 m3/h Discharge pressure ( p ): 125 kp/cm² ( approx. 123 bar ) Nominal speed ( n ): 1450 rpm Flange: Ø 100 / 160 mm bolt circle diameter: Ø 125 mm 4x bore: Ø 13.5 mm shaft: Ø 18 / 20 mm Wavelength: 40 / 15 mm groove width: 6 mm New ! Dimensions: 190 x 172 x 160 mm

Steel cabinet with swing-in doors, tool cabinet ANDREAS KARL FAHRENZHAUSEN 890 x 450 x 950 mm (usable dimensions) 2 doors: 510 x 970 mm 2 x shelf: 930 x 450 mm (height adjustable) without locking mechanism ! used, tested ! Dimensions: 1100 x 530 x 1130 mm

Precision spirit level, control level VEB CONTROL - STRAIGHTENING SCALES KARL - MARX - STADT 150 mm Accuracy: 0.05 mm / m in wooden box Dimensions: 180 x 180 x 60 mm

Steel cabinet with swing-in doors, tool cabinet, with tool holder ANDREAS KARL FAHRENZHAUSEN 890 x 450 x 950 mm (usable size) 2 doors: 510 x 970 mm 2 x shelf: 950 x 450 mm (height adjustable) lockable, without key ! used, tested ! Dimensions ( cabinet ): 1100 x 530 x 1130 mm Dimensions ( transport ): 1110 x 550 x 1130 mm

Centrifugal fans, centrifugal blowers, centrifugal high-pressure fans with belt drive ELEKTROR Karl W. Müller Type: HRD 2/4 Speed fan wheel: 5130 rpm Fan wheel diameter: Ø 350 mm Volumetric flow: 17 m3/min Total pressure difference: 7.7 kPa ( 0.077 bar ) Induction: Ø 110 mm Output: Ø 80 mm Flange ( outlet ): Ø 165 mm Motor : 2.6 kW 2860 rpm 220 / 380 V 3 AC 50 Hz IP54 used, tested ! Dimensions: 550 x 530 x 560 mm

Centrifugal fan, centrifugal fan, centrifugal fan ELEKTROR , KARL W. MÜLLER Type: HRD 2T FU ( HRD2TFU ) Fan wheel diameter: Ø 350 mm 28,28,0 m3/h 8.5 kPa 5600 rpm Motor : 2.7 kW 277 / 480 V 3 AC 95 Hz IP55 input: Ø 100 mm, flange: Ø 165 mm, bolt circle: Ø 140 mm, 4x M8x1,25 output: 96 / 106 mm ( inside / outside ) fan base: 300 x 200 mm used, tested ! repaired ! Dimensions: 510 x 440 x 510 mm

Testing press, hardness tester KARL FRANK GMBH Type 530 Test force: max. 250 kg Dimensions(hardness tester): 600 x 320 x 800 mm Base cabinet with accessory compartment Dimensions(base cabinet): 650 x 410 x 700 mm used, tested, with accessories ! Dimensions: 650 x 410 x 1520 mm

FOR IMMEDIATE SALE: GLASS BOTTLE FILLING LINE FOR STILL AND CARBONATED DRINKS 330ml & 500ml LOCATION: MANCHESTER CAPACITY 16,000 BOTTLES PER HOUR - 330ML This line is in very good condition and is extremely reliable, maintenance procedures in this facility are excellent. Viewing is encouraged. Please Contact Indassol for videos of the line running 330ml ginger beer product Line 9 - 330ml and 500ml Glass Bottle FEATURED ITEMS: • Makro 6 Station Auto Changeover Self Adhesive Labeller (Year 2018) • Krones Variojet Mecafill Multi Bloc (Rinser, Filler, Crowner and Capper) (Year 2002) • Heuft Low/High Level Rejection System (Year 1997) • VM Systems Laning Device (Year 2005) • OCME Altair Box Packer (Year 2015) • Denwell Carbonation Unit (Year 2020) • Tetra Pak (Tetra Plex) Plate Heat Exchanger For Pasteurisation • Process Tanks Ja ...

Testing press, hardness tester with sorting device KARL FRANK GMBH Type 530B Test force: max. 250 kg Year of construction: 1957 Dimensions(hardness tester): 1050 x 800 x 900 mm Base cabinet with accessory compartment Dimensions(base cabinet): 650 x 410 x 700 mm used, tested ! with accessories ! Dimensions: 1050 x 800 x 1600 mm

Vacuum pump, side channel blower, side channel vacuum pump ELEKTROR Karl W. Müller SD 420 2,2,8 m3/min 340 mbar Connections: Ø 46 mm ( inside ) motor: 1.8 kW 2900 rpm 230 / 400 V 3AC 50 Hz IP54 used, tested ! Dimensions: 400 x 360 x 380 mm

Drum pump, electric drum pump, suction pump VEB MECHANIK KARL-MARX-STADT Type: eMp1A Flow rate: 18 - 28 l / min Operating pressure: 1,7 - 3 kp/cm² (approx. 1.67 - 1.95 bar ) Intake manifold: Ø 58 mm Intake manifold length: 620 mm 0.4 kW 220 V 1AC Connection cable: approx. 2.8 m hose length: approx. 1.8 m used, tested ! Dimensions: 1050 x 300 x 250 mm

Pressure gauge set MANOMETER PLANT KARL-MARX-STADT Pressure gauge 60 0 - 15 MPa (0 - 150 bar) TGL 8701 Case diameter: Ø 60 mm Pressure gauge set (2 pieces) ! New ! Dimensions(single pressure gauge): 60 x 60 x 65 mm

Pressure gauge set MANOMETER PLANT KARL-MARX-STADT Pressure gauge 60 0 - 20 MPa (0 - 200 bar) TGL 8701 Case diameter: Ø 60 mm Pressure gauge set (2 pieces) ! New ! Dimensions(single pressure gauge): 60 x 60 x 65 mm