heuft gmbh used for sale

Used empty glass bottle inspector HEUFT with pre-inspector and rejection Built in 2016. Dismantled and immediately available.

Thermal oil stove with TOUCH controls for rack trolleys 60/80cm, with integrated boiler system type WTO 110 HFT with gas burner with expansion and drain vessel incl. 4 trolleys

-Deck oven Heuft thermal oil -4 shelves each 120x200cm -each floor can be pulled out

Thermal oil boiler Heuft HK230 - Thermal oil boiler - Manufacturer : Heuft / OHL Apparatebau & Verfahrenstechnik GmbH - Type: HK 230 - Thermal oil boiler with gas burner - Heating capacity : 230 kW -Ab. Operating pressure. 4 bar -Ab. Operating temperature:300 C - Capacity: 118 L - Minimum flow rate: 9.5 - Operating voltage: 400 volts 50 Hz - Control voltage: 230 volts - Connected load: 11.6 kW - Nominal current 22.5 A - Year of construction: 1998

Deck shop oven HeuftManufacturer : Heuft Type : B1/5Year of construction : 20095 Shelves per floor 1 x 60x80cm trays or 2x 60x40cm traysThe oven has electrical problems Fuse always goes out Wheels Mobile3N-PE AC 400/50Hz 30kWEtagen height : 22cmExternal dimensions : W: 90cm D: 120cm H: 206cmFor details see picture

capacity / hour ca.: 72000 working direction: right-left (CCW) Strom / Volt: 230 More then 300 machines new and second hand on our seema .de

description: Line consisting of: KHS INNOPAL AS1H KHS INNOLINE PTR (pallet transport),BTR (bottle transport),GTR (pack\box transport) KHS INNOCLEAN EE 52/87 S22K FILTEC FT 49 RLD FILTEC OMNIVISION KHS INNOFILL EM(SVF)120/18 KK Heuft Spectrum TX HBBVXTI60 KHS INNOPAS PIISG 60-175 KHS INNOKET 2090/120-60 LM KT KHS-Metec Promecon 2000 KHS-Metec Promecon 4000 TAP TONE 500 KHS WrapAroundPacker TYPE 320/70 FILTEC OC-300 ARIES PACKAGING Type 906 ser 10 + SFT VWS 45 KHS INNOPAL LORD 2 BSN1 Robopac Robopac genesis DOMINO -520 DOMINO M-Series plus KHS 3-3000/34M Equipment YOM 2011: KHS Container Conveyor BTR KHS Pack conveyor GTR KHS Shrink Packer SP A-H KHS Carry-strip-master CSM 070-3 KHS Pack conveyor GTR Prices: 350.000 Euro for total, except 2011 equipment. 250.000 Euro for equipment of 2011 capacity: 50.000 b/h Besides buying and selling of co ...

description: The Machine is in good condition. Compact installation dimensions, high speed possible (50.000bl / h) Checking of: 2 side walls (another 2 side walls could be added) Inlet control, finish control, base control, outlet control, HF caustic and restdual liquid detection, separate module for external bottle recognition (height, contour, color) .. YOM. 2013. It was reconditioned in 2016 + modified. All information without guarantee. capacity: 5000-50000 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also  ...

Danaher Motion GmbH, type: SCH-SERVOSTAR 443M-C, serial number: 00800231679, 230/400 V, 50/60 Hz, 3 A, dimensions: 240 mm x 220 mm x 130 mm.

For sale we offer our company TELKES GÉP GmbH, which has been trading in used industrial machinery for almost 30 years. Our offering includes inventory, location, equipment, assets and relationship capital. In our opinion, serious business relations can be achieved in Hungary. If you are interested, we will of course provide further detailed information: +36 20 9726 425

Presetting device of the brand E. Zoller GmbH & Co. KG Type H620-00045 Voltage: 230 V Pneumatics: 4-6 bar Power:

Ref.Nr. Schmidt-INN Press Manufacturer: Schmidt Technology GmbH Type: 29-50-2K Compressive force: 22 KN Safety distance: 170mm min/max. operating pressure 3/6 bar Stroke: 50mm Delay time: 0.055sec Weight 120 kg Facility is immediately available (without tools)

Description: Hydraulic operating pressure: 300 bar Voltage: 380 V, 50 Hz 3 phases 3 KVA Hydraulic oil: Mobil D.T.E 26 Oil: 76 liters Approx. Onsite Dimension. (l x w x h): 2,100 x 650 x 2,350 mm, weight approx.: 1,900 kg

Description: Control unit type ZHS-2/64 Nominal pressing force: 100 kN max. Nominal pressure: 6.5 bar Overrun time: 60 m sec Overtravel: 12 mm Safety distance: 110 mm weight approx.: 598 kg, Approx. Onsite Dimension. (l x w x h): 800 x 1,250 x 2,100 mm

Sabiel Ingenieurbüro und Apparatebau GmbH palletizer with spacer unit, roller width: 930 mm, total dimensions: 2500 mm x 6500 mm x 3400 mm, dimensions switch cabinet: 1800 mm x 510 mm x 2050 mm.

Sabiel Ingenieurbüro und Apparatebau GmbH palletizer with spacer unit, type: PAL.L.22, product number: 19.141, year of construction: 2001, 400/230 VAC, 50 Hz, 24 VDC, 50 A, 6 bar, roller width: 1120 mm, total dimensions: 3300 mm x 7150 mm x 3400 mm.

Treif Maschinenbau GmbH portion cutter, model: FALCON conti, machine number: 461004.61938.108172, year of construction: 2010, 380/480 V, 3 Ph, 50/60 Hz, 22-18 A, 8.6 kW, weight: 750 kg, plastic infeed belt, belt width: 220 mm, clearance: 220 mm x 200 mm, plastic outfeed belt, belt width: 240 mm, total dimensions: 4520 mm x 1300 mm x 1940 mm.

Treif Maschinenbau GmbH slicer, model: DIVIDER ORBITAL, machine number: 055005.161076.114311, year of construction: 2012, 190-240 V, 3 Ph, 50/60 Hz, 9 A, 4.8 kW, weight: 820 kg, plastic outfeed belt, belt width: 410 mm, total dimensions: 3800 mm x 1100 mm x 2180 mm. Including parts and extra knife.

Sabiel Ingenieurbüro und Apparatebau GmbH palletizing installation for buckets, type: EIMER-PAL, product number: 19.141, year of construction: 2002, 400/230 VAC, 50 Hz, 24 VDC, 63 A, 6 bar, consisting of: M.A.S. Fördertechnik und Anlagenbau s/s pallet de-stacker, Sabiel spacer unit, various in- and outfeed roller conveyors for pallets, infeed conveyor for buckets, Motoman Robotics Europe AB palletizing robot, type: ERC3-SP100X-160-RE00 and switch cabinet, total dimensions: 8750 mm x 7875 mm x 3200 mm.

Apparate- und Behälter-Technik Harrislee GmbH s/s tank, type: TSL-ZB, number: 163376, year of construction: 1993, capacity: 200.000 liter, dimensions: ø 4350 mm x 21500 mm.

Apparate- und Behälter-Technik Harrislee GmbH s/s tank, number: 163375, capacity: 200.000 liter, dimensions: ø 4350 mm x 18000 mm.

Sabiel Ingenieurbüro und Apparatebau GmbH palletizer with spacer unit, type: PAL.L.22, product number: 19.141, year of construction: 2001, 400/230 VAC, 50 Hz, 24 VDC, 50 A, 6 bar, roller width: 1120 mm, total dimensions: 3300 mm x 7150 mm x 3400 mm, including steel platform with stairs, dimensions: 4500 mm x 890 mm x 2500 mm.

Optima Control Systems GmbH checkweigher, type: HC, number: 1002434, year of construction: 2004, 230 V, 50/60 Hz, belt width: 295 mm, maximum weight: 7500 gram, OCS metal detector, model: MN 2.2 C 350/175, serial number: 960204-C (NF), belt width: 290 mm, clearance: 350 mm x 135 mm, Multivac labeller, type: MR233, machine number: 30089/11, year of construction: 2011, 230 V 50 Hz, 700 VA, belt width: 295 mm, with double ejector, total dimensions: 4600 mm x 1300 mm x 2300 mm.

General SKULT006 LocationGermany MakePharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs TypePool Tank No.12466 Year of construction2021 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume80 Ltr. Specified Features - Stainless Steel Reactor Reactorcheck Capacity65 Ltr (80 Ltr) Vessel sizesdia.347.6 x726mm OutletG1 With jacket(13,0 Ltr, 0,6M2) Max. temperature-10/95 Degr.C. With propellor stirrerMagnetic ZETA, Type BMRT 50 W EX S Dk Motor(Ex) Speed mixing shaft125-860 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information With switchgearcheck Total height+/- 1.5 M2 CEcheck Mounted on legsmobile skid With switchcheck ATEX compatiblecheck Extra SpecificationsThe tank is equipped with a pressure gauge, temperature sensor, level switches, valves (manually or pneu ...

Jar cap inside lid feeder. This has been in use in the cosmetics industry. At the moment the lid size is 40 mm ( 5 mm )

- Machine: Sealer - Machine type: Sealpac 350 - Packaging machine - Year built: 2004 - Power: 3 kW - Voltage: 3 x 400 / 230 V - Weight: 450 Kg. - Dimensions: 800 x 7300 mm (possibility to shorten the length)

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

Robust snow plough/bulldozer shield/shield combined with Hardox segment scrapers with plate suspension. Softer suspension available for pure snow removal. Shield can be shortened to 1500 mm width and reduced in height. Re-insertable for rolling the snow on top. Plastic scrapers for asphalt protection available as an option. Adapter plate for attachment to tractor, truck, etc. included in the price. For attachment to wheel loader and forklift, or front three-point height adjustment can be omitted (low price). technical data: - Shield width 2600 mm can be shortened to 1500 mm, widened up to 3600 mm - asymmetric design possible - Clearance width at 36 slants: 2100 mm - Height 875 mm (minimum height 670 mm) - Total length with adapter 1120 mm - hydr. Hug 300 mm - extremely stiffened for earth movement, gravel, food, debris, etc. - Scraper slurs segmented with plate suspension, o ...

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

Centrimax - Winkelhorst Trenntechnik GmbH is specified for over 30 years on the delivery by used separators of the brands Westfalia separator and Alfa Laval. The separators are fully reconditioned by us and are delivered with warranty. Disc stack separators (selfcleaning separators, solid wall separators and nozzle separators) as well as chamber separators, for the purification and the separation of suspension and liquid mixtures count to our big stock of several hundred separators. Ask us if you search consultation in the solution of problems in the area of the centrifugal dividing technology. Shop with the specialist!

Cat. No. 06-1101-6 new with Floating Cover - round vertical on Feet Cat-Nr.06-1101-6 available : 5 Standard Features: • Manufacturer: Eurolux GmbH • Material: 1.4301 acc.DIN 17440 AISI 304, inside 3IIId = 2B – outside marbled • Surface fully pickled, passivated and neutralised • All welds are treated and not porous to prevent the occurance of unwanted bacteria. • Firm Legs that ensure stability of the whole vessel • Drain Port DN 50 • Level Indicator • Floating Lid with Accessories • Xiring-escape Valve • Air Pump • Transport Hooks for Lid on/off Volume: 1000 litres Diameter: 920 mm Height Cyl: 1500 mm Total Height: 1910 mm Feet Quantity: 3 Surcharges/unit: (Prices upon request) Butterfly Valve DN 50 Clap Lid Crane Support for Ladder Connecting Pipe for Clap Size 37 with Butterfly Valve DN 40=Clea ...

centrimax.de Centrimax - Winkelhorst Trenntechnik GmbH has specialized in the supply of used SEPARATors from GEA Westfalia Separator and Alfa Laval for more than 30 years. The separators are overhauled by us and delivered with warranty. Our large stock of several hundred separators includes plate separators (self-cleaning separators, full-coat plate separators and nozzle separators) as well as chamber separators, for the clarification and separation of suspensions and liquid mixtures. Ask us if you are looking for advice on solving problems in the field of centrifugal separation technology. Buy from the specialist !

MIW Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven-Germany Tel:(0049)(0)-4281-950583 Fax:(0049)(0)-4281-950585 abc.miw-zeven.de e-mail:info@miw-zeven

cylinder head completed with valves+springs recondioned at stock now! MIW GmbH Nord-West-Ring 8 D-27404 Zeven-Germany phone: 0049(0) 4281950583 fax : 0049(0) 04281950585 mail: info@miw-zeven

PVS Micro cut model MC 12 Machine for chopping up of various products engine 9 kW of U / min. 3000 funnels state kind 45 Litre of other funnels größen on wunsch and against surcharge

AT-Motoren alle sofort ab Lager lieferbar mit Garantie MIW GmbH Motoren-Instandsetzungs-WerkNord-West-Ring 8 27404 Zeven-Germany Tel.0049(0)-4281-950583 Fax.0049(0)-4281-950585 email=info@miw-zeven.de

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

Autoclaved Aerated Concrete AAC Production Line, Porenbetonwerk, Aerated concrete plant, ERICH PETER MACHINES-PLANTS GMBH A-7083 Purbach Hofgartengasse 7 Phone: +43 664 3358378 Mail: office@machines-plants.at Web: www.machines-plants.at

Tank container 26,000 L tank and apparatus construction Manufacturer: Tank und Apparatebau Neesen Segler GmbH&Co.KG Built: 1993 Room capacity: 26,000 L Danger Class: AIII Inside rubberized, monitored Condition: good

Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used decanter centrifuges of the makes Flottweg, GEA Westfalia Separator and Alfa Laval. The decanter centrifuges are delivered by us fully reconditioned and with warranty. 2-phase decanters and 3-phase decanters (tricanters) as well as sedicanters count to our big stock of more than 100 decanter centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used centrifuges, like decanter centrifuges, disc stack centrifuges, peeler centrifuges, pusher centrifuges, worm screen centrifuges etc., of the makes GEA Westfalia Separator, Alfa Laval, Flottweg, Siebtechnik etc. The centrifuges are delivered by us fully reconditioned and with warranty. Our stock includes several hundreds of centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

We offer an Exchange overhault engine Caterpillar type: C13-LGK... Engine is general-overhault with guarantee. Also for chrusher contact: MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven, Germany Phone:0049 (0 4281-950583 fax :0049 (0)4281-950585 info@miw-zeven.de email:info@miw-zeven.de abc. miw-Zeve

MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany info@miw-zeven

Cat.-Nr. 13-0176 in a very good condition material: V2A � AISI 304 (1.4301) � surface: outside and inside 2B=IIIC Manufacturer: com. Binder GmbH Upper bottom: - flat conical lid with with CIP-cleaning and connection DN 65 - manhole oval 435 mm x 310 mm with clamping bracket and screw plug - CIP-connector DN 50 - Ventilation connector 200 mm - 1 flanged connector DN 50 - 2 eye hooks Tank body: - thread connector on the side above DN 50 - thread connector on the side above DN 50, 40 cm depth - with overflow pipe inside DN 100 up to the top of the tank bottom - fill pipe installed inside to tank center DN 100 welded from top to bottom - ladder hook 500 mm Lower bottom: central conical bottom outlet pipe DN 50 on 4 stable trumpet feet with calotte height adjustable DxH: 1.720 x 3.700 mm weight: appr. 800 kg All prices are valid Ex-Works, excl.V ...

All other original spare parts are available immediately from stock. o.g.Price are applicable. Freight+Packaging+law. Tax Please check the number of teeth ! MIW Ltd. Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven-Germany Tel:0049(0) 4281 950583 Fax:0049(0) 4281-950585 e-mail:info@miw-zeven.de abc.miw-zeven.de

Gearmotor SEW R82DV132S-4 - used - MANUFACTURER´S DATA SEW R82DV132S-4 output: 5,5 kW motor speed: 1430/73U/min tension: 400/690Δ/Y shaft: 50mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach.com