heu used for sale

-For PET or PEHD bottles -tests if the bottle is leaking by a pressure sensor in the side belts -Fill height control with radiation Spectrum TX VX 8.00.002 Serial Number: 2TG022697 More then 300 machines new and second hand on our seema .de

Heuft Linear II More then 300 machines new and second hand on our seema .de

Heuft boiler Type: KO 160 186kW Overhauled 2013 For thermal oil, furnaces and equipment with control box with separate control large Elco burner Height: 150cm Width: 130cm Depth: 150cm

-Thermal oil deck oven -Manufacturer: Heuft -with 6 shelves each 120x200cm -3 pull-out floors -with exhaust hood -immediately available in stock -was still in operation until 30.09.2023

pressure: 55 t throat: 200 mm stroke: 10-80 mm ram - range of adjustment: 60 mm no. of strokes: 120 Hub/min table surface area: 600x450 mm ram surface: 290x230 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vacuum pump, rotary vane pump, rotary vane vacuum pump -Manufacturer: Busch, vacuum pump type 80/12D -Motor: Loher 0.55 kW 1405 rpm -Flow rate: 12 m3/h -Dimensions: 370/160/H230 mm -Weight: 18.5 kg

Vise, bench vise, locksmith vise, parallel vise, heavy duty vise -Parallel vice: jaw width 135 x 20 mm with pipe clamping jaws -Wingspan: 230 mm -Tube clamping jaws: integrated -Dimensions: 470/135/H185 mm -Weight: 16.5 kg

-Thermal oil boiler -Manufacturer: HTT / Heuft (overhauled in 2000) -with gas burner -Type: WTO100D -Year of construction: 1992 -Heating capacity: 125 kW -Ab. Operating overpressure: 8 bar -Ab. Operating temperature: 300 C -Capacity: 53 liters -Operating voltage: 400 volts -Connected load: 4.6 kW -Rated current: 8.5 A -overhauled by Heuft in 2000

diameter range 6 mm shaft length under head 50 mm max. cutting length 70 mm output- piece/min 125

diameter range 2-4 mm shaft length under head 100 mm max. cutting length 117 mm output- piece/min 110

ZZ 38 | BOTTLE INSPECTOR HEUFT YEAR: 2019 SPEED: 48.000 BPH FUNCTION: CONTROL OF FOREIGN BODIES (GLASS, IRON AND STONE) TYPE: X RAY INCLUDING REMOTE CONNECTION PROGRAM SAFETY PROTECTIONS

ZZ 36 | BOTTLE INSPECTOR HEUFT YEAR: 2008 SPEED: 36.000 BPH MODEL: SPECTRUM VX TI S/N DIRECTION: FROM LEFT TO RIGHT ON THE OPERATOR SIDE TYPE: CAP PRESENCE AND POSITIONING CONTROL WITH 180° CAMERA LEVEL CONTROL (SUBLEVEL - OVERLEVEL) NOT RECOMMENDED ON BOTTLES WITH METAL CAPS WITH MULTI-SEGMENT EJECTION (DAMAGED) BOTTLE TRACKING AND LOCALIZATION SYSTEM IN THE FILLER AND CAPPER

Inspection unit for fill level inspection by high frequency, label inspection, ejection unit Heuft Delta FW 10, Additional title: Heuft Spectrum TX, Capacity: 40000 bottles/h, Width: 1452 mm, Weight: 100 kg, Features: Heuft ejection unit Delta FW 10

table diameter: 4520 mm table load: 12000 t swivelling range: 110 Grad total power requirement: 44 kW weight of the machine ca.: / t required space: / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 ---------------------------------------------------------------------- ---- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH  ...

Current: 4 A, Voltage: 230 V, Frequency: 50/60 Hz, Compressed air: min. 6 - max. 10 bar, Running direction: Crosswise, Features: inspection over closure detection, with integrated conveyor stopp

Used empty glass bottle inspector HEUFT with pre-inspector and rejection Built in 2016. Dismantled and immediately available.

Thermal oil stove with TOUCH controls for rack trolleys 60/80cm, with integrated boiler system type WTO 110 HFT with gas burner with expansion and drain vessel incl. 4 trolleys

ThermoRoll oven Heuft VTR 10.12,5.10 Thermo oil -Thermal oil ovens -Manufacturer: Karl Heuft GmbH - Type: VTR 10.12,5.10 -one oven is for 2 rack trolleys of 10 editions each -Sheet size 58x98cm -Furnaces with exhaust hood -Built in 1998

-Deck oven Heuft thermal oil -4 shelves each 120x200cm -each floor can be pulled out

Thermal oil boiler Heuft HK230 - Thermal oil boiler - Manufacturer : Heuft / OHL Apparatebau & Verfahrenstechnik GmbH - Type: HK 230 - Thermal oil boiler with gas burner - Heating capacity : 230 kW -Ab. Operating pressure. 4 bar -Ab. Operating temperature:300 C - Capacity: 118 L - Minimum flow rate: 9.5 - Operating voltage: 400 volts 50 Hz - Control voltage: 230 volts - Connected load: 11.6 kW - Nominal current 22.5 A - Year of construction: 1998

capacity / hour ca.: 72000 working direction: right-left (CCW) Strom / Volt: 230 More then 300 machines new and second hand on our seema .de

description: Line consisting of: KHS INNOPAL AS1H KHS INNOLINE PTR (pallet transport),BTR (bottle transport),GTR (pack\box transport) KHS INNOCLEAN EE 52/87 S22K FILTEC FT 49 RLD FILTEC OMNIVISION KHS INNOFILL EM(SVF)120/18 KK Heuft Spectrum TX HBBVXTI60 KHS INNOPAS PIISG 60-175 KHS INNOKET 2090/120-60 LM KT KHS-Metec Promecon 2000 KHS-Metec Promecon 4000 TAP TONE 500 KHS WrapAroundPacker TYPE 320/70 FILTEC OC-300 ARIES PACKAGING Type 906 ser 10 + SFT VWS 45 KHS INNOPAL LORD 2 BSN1 Robopac Robopac genesis DOMINO -520 DOMINO M-Series plus KHS 3-3000/34M Equipment YOM 2011: KHS Container Conveyor BTR KHS Pack conveyor GTR KHS Shrink Packer SP A-H KHS Carry-strip-master CSM 070-3 KHS Pack conveyor GTR Prices: 350.000 Euro for total, except 2011 equipment. 250.000 Euro for equipment of 2011 capacity: 50.000 b/h Besides buying and selling of co ...

description: The Machine is in good condition. Compact installation dimensions, high speed possible (50.000bl / h) Checking of: 2 side walls (another 2 side walls could be added) Inlet control, finish control, base control, outlet control, HF caustic and restdual liquid detection, separate module for external bottle recognition (height, contour, color) .. YOM. 2013. It was reconditioned in 2016 + modified. All information without guarantee. capacity: 5000-50000 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also  ...

Technische Daten: - Durchsatz 500 - 1200 kg / h (abhängig von den Sieblöchern und der Produktfeuchtigkeit) - Zerkleinerungsfraktion 8 - 15 mm und mehr (Größe ist abhängig von den Sieböffnungen) - Feuchtigkeit des geschredderten Produkts

-Car stainless steel -9 cloth drawers each 173x92cm

Stikkenwagen Stainless Steel for Daub Heuft Thermo Roll Car Furnaces -Cars are available with 9 editions -for sheets 60x100 or 58x98cm -Outdoor mass: 107x65cm and 194cm high

Rack trolleys for Daub Heuft Thermo Roll trolley furnaces Rack trolley stainless steel for Daub Heuft Thermo Roll trolley furnaces with 10 af layers. -suitable for Heuft VTR 08.12,5.10 -suitable for Daub RDTO -Wagons are equipped with 10 editions -for sheets 60x100 or 58x78cm -Outside dimensions: 86.5x65cm and 193.5cm high

Thermopöl Pump Magnetic Pump for Daub Heuft Thermal Oil Furnaces

Pullers Cross Extractors Furnace Shooter 160cm - Cross cloth pullers - We have 3 pieces in stock - For settling bread and rolls - Made of stainless steel - On wheels Dimensions stainless steel trolley : W: 176cm D: 72 H:186cm Puller dimensions: : W: 162cm D: 61.5cm For details see pictures

Overview The disposable glass line was built in 2021 and has less than 1000 operating hours. The machine is currently set up for 150ml jars, but can be converted to 500ml. Technical data CONTAINER Container name: 150 g jar Container type: Yoghurt jar Volume [ml]: 150 Diameter [mm]: 60 Height [mm]: 85 PALETTE Container: 150g Pallet type: EURO pallet Pallet material: Wood Pallet dimensions (LxWxH): 1200 x 800 x 145 mm Transport direction: Lengthwise Number of layers: 18 Number of containers / layer: 27 Formation: 4x2x1 tray with cardboard lid (pack of 8) Machines Automatic depalletizer - KHS Innopal - AS 1N Year of construction 2005 Conveyor technology empty packs and empties inspection -Heuft Filling machine VMS KONTIFILL GLASSLINE 16/UC 10.000bph, ultra clean H2O2, 2 colored 3x A / 3x B, underlaid or stirred yoghurt Closure inspection - Heuft final view Full product X-ray - Heuft Examine ...

We produce stone forecastle records (cooker-flat) Bakeplates for everything type from ovens: -MIWE -WP merchant quail -Debag -Sveba Dahlen -Daub -Heuft and other proficient ones. also stoves for pizza and fur ordered in another dimension (length, width, thickness) ... our panels a perfectly smooth surface are marked, are resistant to mechanical pushes, do not carry during the use, a very long life span. users praise good baking quality.

The system is set up to: PET bottles 0,5 lt 32,000 b/h 1,0lt 29,000 b/h 1,5lt 22,000 b/h 2, 0 lt 18,000 b/h. Additionally for oneway glass bottles 0,25 lt / 27,000 FL/h. Consisting of: -Depalletizers, make. Zecchetti, type: DEPAL 800 B - SN: 1821, for PET and glass bottles, 30,000 FL/h, origin 1994 -for glass bottles:-rinser, make Rivi, 60 pliers 2 nozzles type: twin rinser 2R/60/132, origin. 1994 -glass-bottle filler, Fabr. Simonazzi, type: Eurostar 70.16.8 TK-RAA. 040, with 70 filling valves and 16 crwon heads and aluminium screwcapper 8 head origin 1981 -filling height Inspector, make HEUFT, type: SPECTRUM HBBVXTI36,origin1994 -dating NAGI A 300 year 2002 -shrink packer for glass bottles, makeBaumer, type: T/R 60-40 Univers,1994 -beverage mixer, make Simonazzi,type: Predosix D3 T3, 15.000 lt/h,origin 1984 -beverage analyser, make. Maselli blue, type: RIT-843 BRIX-CO2  ...

Cat.-No. 14-00218 PET line for still and carbonated beverages Format: 1.5 L, production capacity: 20,000 bottles / h in a very good condition Year of construction: 2001 working hours: 42.389 the plant built up yet, but is currently out of operation Machine manufacturer year details Blow moulding machine SIG BLOMAX 16 2001 including molding water inlet, elevator and hopper, cooler (Rahim) Molding m Tanner VZT 3000 dosing system 2001 air transporters 2001 buffer tank 14 m³ Alfa Laval 2001 short time pasteurisation KHS Innopro KZE 2001 330 HL / h Triblock (Rinser, filler, Capper) KHS Innoclean/Innofill 120/10 2001 volume filler Capsule conveyors with supply tank Filling height control HEUFT basic 2001 labeller KHS Anker 2001 label control HEUFT HBF 150000 ST 2001 laser encoder video Jet 3430 2001 shrink film Packer SMI SK 800 T 2001 tray Packer in 6 Pack film (50 ppm)  ...

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Baut ...

Embalming machine Embalming plant Embalming device Individual contract production for a Dutch university by the (fluid) mechanical engineering company Hellebrekers Technieken. Year of construction: 2014 Device for automatic embalming with very high quality components. Electronics from Siemens: - Sirius motor circuit breaker - Sirius Sagittarius - Sirius safety relay - Simatic S7-1200 with Simatic Touch Panel Electronics from Weidmüller: - RJ45 hub -Power supply Sensors from ifm: - electronic pressure sensor PI003A - Switching amplifier N05.. A - SM6000 electromagnetic flow sensor Pressure retaining valve from Stübbe: - DHV 718 Versa Matic tank filling pump: -E8PP5BPP9 pneumatic fluid pump Heukelom embalming pump: - TS057G. (EX version) Eldon stainless steel enclosures: - MCSS18085 - ASR0604021 - ASR0504021  ...

Krones Solomatic Right-to-law machine Ma-No. 018-D53 Torso-chest back labeling Hot melt device for sealing labels Central lubrication Height GDB program + 0.75 / 0.25 excl. Gluing via lifting motor 2 label magazines 2 aggregates external control cabinet Heuft Spectrum TX with Pusher Format parts, gripper heads and screws available Krones Solomatic Right-hand machine Ma-No. 018-D53 Body-chest-back labeling Hot melt gluing device for sealing labels Central lubrication Height adjustment GDB program + 0,75 / 0,25 excl. Gluing via lifting motor 2 Label Magazines 2 aggregates external switch cabinet Heuft Spectrum TX with pusher Format parts gripper heads and screws available

Pop Glace (Frozen pop) pleine entière fabrique des batons of glace. Usine d'Occasion entière pour liquide le entièrement rénové. Chaque machine avec 4 ou 5 ou 6 voies jusqu' à l'exigence du client. Piece mécanique rénovée. Partie entièrement rénovée avec électrique the plupart des composants PANASONIC, PLC, écran tactile, photocellule électrique pour Spot. The peut être variable length juste sur l' écran tactile. L'usine est compoused avec 3 machines pour production: 15,000 PCs par heure pour une longueur autour de 280 mm. Nous pouvons également fournir les réservoirs de mélange et aussi le système pour ajouter the couleur et saveur dans chaque pop de glace (moins d'investissement). Les photos sont pour une machine similaire entièrement rénovée. Nous pouvons également vous conseiller sur le film.

Qty. 1 Second-hand strip rolling mill plant Mfc.: Gautchi, Pechiney, Spidem, Stein Heurty SA, TECMO-HUNTER, ACHARD, WALDRICH Built: 1971, 1973, 1975 Modernisation in 1991 Strip width: 850 – 1600 mm Thickness Entry: 12 mm Exit: 0.3 mm Consist of: Qty. 2 Strip casting line 4-Hi rolling mill Qty. 2 Homogenisation furnaces Slitter Grinder Qty. 2 Coil cars

Sidel SBO 20 Universal Aseptic Bottling line - Capacity: up to 40.000 bph by 500 ml / 28.000 bph by 1500 ml Products: fruit juices Bottle formats: 200 ml, 500 ml, 1500 ml, 1750 ml Year of manufacturing: 2011 consisting of: 1. SIDEL SBO 20 Universal PET blowing machine, year of manufacturing: 2011 composed of: – preform tipper – preform hopper, unscrambler and infeed rail – Sidel ARS system HP air low consumption – Eco2 oven with 20 heating modules for 38 neck – blowing station for 20 quick change shell molds, – Compressor ABC 4HP-4-LT complete but without cooling tower moulds are not included 2. Sidel Rafale air conveyor system from exit Sidel blower to entry Sidel aseptic filler with curves etc – length approx. 250 meters also with full automation & drive and electrical panels. 3. Sidel Sensofill FMA 80/24K BS 13 aseptic tribloc, composed o ...

Can filling line capacity: 12.000 cph by 330 ml slim line cans - can type: 202 / 200 product: carbonated water and optional for flavoured still water year of manufacturing: 2017 consisting of: 1. Empty can depalletizer CFT 2. Empty can inspection HEUFT 3 Empty can cable conveyor CFT 4. Empty can Rinser CFT 2-channel rinser 5. Can filler CFT with 24 filling valves and 4 head seamer 6. Full can inspection HEUFT 7. Fault can reject HEUFT 8. Full can conveyors CFT 9. Tray Shrink Packer SMI to shrink the following formats: 4 x 3 = 12 can/pack 6 x 4 = 24 can/pack 10. Carbonator CFT 11. Inkjet coder Videojet The line is in a very good technical condition.

Machine a blocs mobile Contec SP 5 pour la fabrication des blocs, hourdis, blocs U, pavee, bordures, blocs mur etc. Max hauteur de produit 300 mm Min hauteur de produit 100 mm surface travaillant max. 1000 x 500 mm Capacité: jusqu´a 3.500 blocs 400 x 200 x 200 mm / 8-heures poste de production

oven 1150 inner chamber dimensions 1 x 1 x 2m t max 1150 Celsius PLC Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungsöfen Abwärmerückgewinnung Aluminiumgiessereimaschinen Anlassofen Brennöfen Dentalofen Durchlauföfen Emaillierofen Fusingöfen Generatives Fertigungsverfahren Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für sbguss Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Indust ...

Heat treatment oven 1150 0.8x0.8x1.5m t max 1150 C possible various size ovens Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorw ...

Model : TRM 24-F Cadence maxi: 200 Boites/MN Moteur : 3 KW SEW -USECOME 220/400V Tri 50 Hz Air Comprime : 1 Nim3/ heure Quimper : 2002

furnace 1200 1x1x2m t max 1200 Celsius plc auto door various size possible Industrieöfen- Fertigung und Reparatur jeglicher Art Wartung und Einregulierung von Industriebrennern Industrieöfen für Öl, Gas oder elektrisch beheizt Umfangreichen Sortiments an Feuerfeststeinen, Feuerfestmassen, Isoliermaterialen und Gießereihilfsstoffe namhafter Hersteller. Renovierungen und Instandsetzungen von Ofenanlagen Brenner einstellungen von Ofenanlagen Modernisierungen von Ofensteuerungen Umrüstu ng von elektrischen Öfen auf gasbeheizte Öfen Umrüstung alter Heizsysteme auf Rekuperation Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungs ...

Feeding puller DAUB Heuft Hein thermal oil stovePuller with trolley DAUB thermal oil stoveTotal external dimensions: W.: 159 cm , D.: 89 cm , H.: 196 cmPull-off dimensions: W.: 75 cm , D.: 158 cm , H.: 4 cm4 pieces we have in stockDetails see picture

Table length: 3200 mm Table width: 1100 mm Longitudinal X: 3000 mm Cross Y: 1250 mm Vertical Z: 1600 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: iTNC 530 Make Ki Heung U 1250\ Type KNC U 1250 Year 2004 iTNC 530 Table length (mm) L = 3.200 Table width (mm) W = 1.100 Longitudinal X (mm) X = 3.000 Cross Y (mm)Y = 1.250 Vertical Z (mm)Z = 1.600 Iso 50 / 28 kW / 4000 Double chip conveyor Spindle orientation  

Table length: 2500 mm Table width: 900 mm Longitudinal X: 2100 mm Cross Y: 1000 mm Vertical Z: 1050 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 410 Merk Ki Heung 1 Type KNC 1000 U Jaar 2004 ki heung knc 1000 u HH TNC 410 PA bedmilling Tafellengte (mm) L = 2500 Tafel breedte (mm) W = 900 Langs X (mm) X = 2.100 Dwars Y (mm)Y = 1.000 Vertikaal Z (mm) Z = 1.050 iso50/4000/22kW Universal huron milling head Double chip conveyor Oil cooler Ridged tapping 8000 Table load  

Table length: 2200 mm Table width: 550 mm Longitudinal X: 1600 mm Cross Y: 720 mm Vertical Z: 750 mm Positions ATC: 0   CNC Model: 0 Make Ki Heung U6 Type KMB U 6 Year 1996 Conventionel universal bed milling Table length (mm) L = 2.200 Table width (mm)W = 550 Longitudinal X (mm)X = 1.600 Cross Y (mm)Y = 720 Vertical Z (mm)Z = 750 Iso 50 / 11 kW / 1600 Rpm Universal milling head 2 doors front side  

Table length: 1700 mm Table width: 470 mm Longitudinal X: 1400 mm Cross Y: 600 mm Vertical Z: 590 mm CNC Brand: Heidenhain CNC Model: TNC 410 Make Ki Heung Combi Type Combi U3Z Year 05 / 2000 Ki heung comi milling TNC 410 PA freesmachine Table length (mm)L = 1.700 Table width (mm)W = 470 Longitudinal X (mm)X = 1.400 Cross Y (mm)Y = 600 Vertical Z (mm)Z = 590 Iso 50/2500/11kWCNC TNC 410 PAHR 410 handwheel2 doors front side Universal milling head Full set documentation