hermle c 20 used for sale

Pullers ALU for 200cm deep furnace NEWAductors made of ALUApullers for 200cm deep furnacePullers dimensions: W: 240cm D: 58cmDo we have various large pullers in stockDetails see picture 

Pullers with puller carriage for 200cm deep furnace NEWThe puller trolley stainless steel with 10 ALU pullerson rollersTrolley profile 40x40mm screwedOuter dimensions: W: 251cm D: 64cm H: 184cmInternal dimensions: W: 243cm D: 64cm10 pieces Pullers made of ALUAductors for 200cm deep furnacePuller dimensions: B: 240cm T: 58cmSee pictureDo we have various large pullers in stockDetails see picture 

For Sale: Jenbacher J620 GS-E12 – year 2013 Power output: 4277 kVA The unit was fully overhauled at 50,000 operating hours and has since run for approximately 36,000 hours. Included equipment: Control panels Transform Gas line Dry cooler Complete installation in good operational condition. Loaded now in France

SCODIX ULTRA 202 Year 2019 Printing counter: only 230.000 copies Paper size Min: 29 x 42 cm Paper size Max: 54 x 78 cm Printing size Max: 74 x 50 cm Foil technology Digital in-line with Scodix PAS foil technology Foil roll width (min/max) 50-500 mm/1.97-19.68 in Foil roll size Diameter:max 30 cm, Length:max 2,000 m, Core:77mm/3 in Max number of simultaneous rolls Up to 4 rolls Polymer layer thickness From 5 up to 250 microns Substrate weight 135-675 gsm/6-30 points Substrate thickness Up to 700 microns Foil film type Wide variety of industry standard hot/cold foil films Substrates Offset, Plastics, laminated and coated/uncoated substrates Resolution Up to 2540 x 450 DPI Variable Data Enhancement (VDE) PDF, optimized PDF, barcode system (optional) Scodix RSP? Technology 4 CCD camera system, RSP? (Rotate, Scale, Position) algorithm, automatic positioning, ± 100 micron image to image regis ...

4 Ink Pumps Complete Technotrans TB 200-15/9 Ink Pump Year 2007 Capacity 200kg bins Air Pressure: 8bar

Bacher 2045 Registerpunching Rigister punching width: 425mm Max plate width: 800mm

pressure: 200 t nominal power: 2000 kN stroke length max.: 1700 mm working feed: 50 mm/sec weight of tools max.: 50000 kg voltage: 400 V table-size: 4.800 x 2.400 mm total power requirement: 99 kW weight of the machine ca.: 113 t dimensions of the machine ca.: m passage width: mm stroke: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Model: KMRS-200 Year: 2016 Condition: Used Serial Number: 17508-001 Stock Number: 2969 Capacity: 700 pc/h Belt width: 325 mm Diameter cutting ring; 270 mm CIP unit hot water min. 60 degrees Celsius Compressed air:5 Bar, 3.5 Nm³/h Power: 3 x 400V, 50Hz, 2kW Dimensions: 1600 x 1150 x 1500 mm

A manual screen printing machine Eickmeyer is available. Material thickness range: 2mm-25mm, max. printing dimensions X/Y: 1700mm/700mm, machine dimensions X/Y/Z: approx. 2650mm/2100mm/1500mm. An on-site inspection is possible.

Sell a notching machine from FIM in good condition!

Key data: 200 t, 80 mm

Inv. Num. : 9036 Type: 200 T Producer: ROSS Created: 2003 Parameters: Control system: DIMECO MCU 24 Compressive force: 200 t Table length: 2100 mm Table width: 1000 mm Stroke: 80 mm Adjusting the ram: 150 mm Machine weight: 36700 kg

sheet width: 2070 mm plate thickness: 25 mm pre-bending: 18 diameter of upper rolls: 320 mm side roll diameter: 260 mm diameter of lower rolls: 320 mm : 26 kW : 8100 kg : 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter range 200 mm max. outside dia. of round pieces 200 mm kind of heating 200 KVA

diameter range max 18 mm feeding speed max 15 m/m capstan diameter 900 mm output 20 HP

Used Netzsch pearl mill type LME 200.The mill has a cooling jacket. Year of construction 1989.

Automatic feed via Elgo control system E 255 For mounting on any Elumatec single-head saw (right) Max. feed length: 3000 mm

Block gluing press EMMES EPP 200 pneumatic Maximum gluing length 2000 mm Number of vertical clamps 6 Number of frontal clamps 3 Net price

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems -Minimum height: 75 mm -Max. height: 95 mm -Price: per piece -Quantity: 4 pieces -Dimensions: 230/180/H80 mm -Weight: 12.3 kg/piece

Measuring transducers, power measuring transducers, active power measuring transducers, analog converters, frequency/analog converters, frequency dividers, isolating converters, signal converters, isolating converters, switching amplifiers -Manufacturer: Schuhmann, switching amplifier -Type: SV 5.20G-312 -Price: per piece -Number: 4 piece -Dimensions: 80/23/H105 mm -Weight: 0.1 kg/piece

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, solenoid valve -Manufacturer: Alco, solenoid valve for refrigeration, unused original packaging -Type: 200 RB 4 T 3 (m)/PCN 801 176 -Connections: 10 mm ODF -Dimensions package: 140/100/H50 mm -Weight: 0.3 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SSB, gear motor from automatic saw, drill and mill Rapid DGL / BFA -Type: DSG-012 / 20-0410.208.40 - K1 - B5 -Gearbox: Type 012 i = 6.98 -Speed: 380/40 rpm -Power: 0.75 kW -Construction: B14 Hole circle: O 100 mm (O10 mm) - Shaft: O 20 x 40 mm -Protection class: IP 44 -Brake: 24 V 1.3 A. -Dimensions: 515/230 / H170 mm -Weight: 22 kg

Three-phase motor, electric motor -Condition: unused -Manufacturer: Aerzen Weg, Electric motor type: 200L-02 -Power: 30 kW -Speed: 2970 rpm -Shaft: Ø 55 x 110 mm -Design: B3 -Protection rating: IP55 -Number: 3x motors available -Price: per piece -Dimensions: 770/400/H510 mm -Weight: 226 kg/unit

Frequency converter, frequency converter, drive converter, controller, variable speed drive, solar cable -Manufacturer: Aurora, PV inverter unused from stock liquidation ovp -Type: PVI-2000-OUTD-DE -Max. Continuous output power: 2000 W -Price per piece -Quantity: 26 pieces -Dimensions: 420 x 310 x 144 mm -Weight: 12kg/pcs

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer diameter: 200 mm -Height: 20 mm -Dimensions see: sketch in the photos -Delivery of: steel/stainless steel cover plates possible -Price: per piece -Number: 2 pieces -Minimum purchase: complete -Weight: 0.5 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 0 A - 200 A -AC -Installation dimensions: LxWxD approx. 66x138x165 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H165 mm -Weight: 0.7 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Type: No. 6.620086.4 -Display range: 200 V - 240 V -Installation dimensions: LxWxD approx. 66x138x165 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H165 mm -Weight: 1 kg

Micrometer screws, micrometer screws, tooth width measurement, plate measuring surfaces -Measuring range: 25-200 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -large measuring surfaces -Measuring force: Ratchet -Including case -Adjustable dimensions -Hand protection -Key Other sizes also available -Weight: 5 kg

Respiratory protection filter, pocket filter -WxHxL: 592x490x360 mm: AUT-Pak C86-8 KK: 1 piece -WxHxL: 592x287x360 mm: AUT-Pak C86-8 KK: 1 piece -WxHxL: 592x592x500 mm: AUT-Pak C86-8 KK: 3 pieces -WxHxL: 592x287x500 mm: AUT-Pak C86-8 KK: 1 piece -WxHxL: 287x592x500 mm: AUT-Pak C86-4 KK: 1 piece -WxHxL: 490x592x360 mm: AUT-Pak C86-6: 4 pieces -WxHxL: 592x287x360 mm: C-8T-K: 5 pieces -WxHxL: 592x592x500 mm: AUT-Pak C86-6: 9 pieces -WxHxL: 592x592x600 mm: HTH 76600/6: 4 pieces -WxHxL: 592x287x600 mm: HTH 72600/8: 4 pieces -Price: complete -Number: 33 pieces -Weight: 45 kg

Heavy duty castors, heavy duty wheel, tires, heavy duty double swivel castors, heavy duty double fixed castors -Equipment: Ball bearing, VULKOLLAN -Wheel dimensions: 200 x 80 mm -Load capacity: approx. 2500 kg -Mounting plate: 310 x 345 mm -Overall height: 345 mm -Number: 7x wheels available -Price: per piece -Dimensions: 410/310/H345 mm -Weight: 91 kg/each

Barrel lifter, barrel handling, barrel gripper, barrel lifter, barrel handling, barrel gripper -Drum lifter with: gripper head -Load capacity: kg -Suitable for: 1 x 200-L steel bung drums, steel lid drums, rolling hoop drums -Reception: 410 mm -Automatic opening when: setting down the barrels -Number: 2x grippers available -Price: per piece -Dimensions: 340/305/H900 mm -Weight: 47 kg

Gear motor, electric motor, electric gear motor -Power: 0.25 kW -Diameter hollow shaft: 22 mm -Speed: hollow shaft 91 rpm -Diameter shaft: 11 mm -Speed shaft: 380 rpm -Construction: hollow shaft -Protection class: IP 44 -Brake -Number: 1x engine available -Price: per piece -Dimensions: 370/210/H175 mm -Weight: 15 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: O 30 mm - Hole circle: O 115 mm (O12 mm) -Protection class: IP 54 -Number: 2x gear motors available -Price per piece -Dimensions: 520/240 / H220 mm -Weight: 30 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 32.5 rpm -Power: 0.75kW -Angle -Type: B5 -Diameter shaft: Ø 35 mm -Brake: 24V -Protection class: IP 65 -Number: 1x geared motors available -Price per piece -Dimensions: 560/300/H240 mm -Weight: 42kg

Slotted discs, window milling tools, indexable inserts for window construction tools, wood milling tools, wood milling cutters, milling tool for wooden windows, wood router bit, milling head, milling tool, wood router bit, profile router bit -Manufacturer: VIVALDI, window milling tool -Outer milling cutter: Ø 207 mm -Height: 75 mm -Hole: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 6.7 kg

Transport scooters, platform trolleys, transport trolley wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailer tires, stroller wheels -Complete wheel: tire for pram/bicycle trailer ... unused -Tyres: Outside O 200 mm -Rim: Inner O 13 mm - Quantity: 72 pieces -Price per piece - Minimum purchase: 4 pieces -Dimension: O 200 x 75 mm -Weight: 0.5kg/pcs

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Manufacturer: Fabryka Przyrzadow, 3-piece soft top jaw set -Type: PUTm-M 200 -Width: 25 mm -Number: 5x jaw sets available -Price per piece -Dimensions carton: 80/90 / H75 mm -Total weight: 2.3 kg / set

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer: with 1-axle turntable steering -Platform: 2000 x 1000 mm, height 525 mm -Load capacity: 3000 kg -Tires: solid rubber -Trailer coupling: for industrial trailers -Dimensions: 3515/1000/H525 mm -Weight: 264 kg

Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver -Manufacturer: TR-Electronic, rotary encoder -Type: HE-65-M -Art.No: 205-00059 -Voltage: 11-27 V -Number: 1x encoder available -Price: per piece -Dimensions: 140/100/H165 mm -Weight: 1.3 kg/piece

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, -Manufacturer: Orsta, hydraulic pump A10 TGL 10859 -Motor: 2x 0.55 kW 1360 rpm -Pressure: nominal pressure 16 MPa / 160 bar max pressure 200 bar -Flow rate: total approx. 12 l/min (2 x 6 l/min) -Hydraulic tank: with indicator -Individual components: see photos -Number: 2x aggregate available -Price per piece -Dimensions: 735/510/H1395 mm -Weight: 112 kg/pc.

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: Bürkert, pneumatically operated 2/2-way angle seat valve unused -Type: 2000 D23 Ø 20.0 PTFE VA -Connection: DN20 PN16 -Number: 2x valve available -Price per piece -Dimension: 220/100/H90 mm -Weight: 1.4 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: bürkert, pneumatically operated 2/2-way angle seat valve unused -Type: 2000 A 40,0 PTFE VA -Connection: DN40 PN16 -Dimension: 260/103/H250 mm -Weight: 3,3 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs -Length: 2500mm -Width: 2000mm -Plate thickness: 40 mm -Plate: with support ribs - Flatness: see photos (guideline not included) -Transport dimension: 2500/2000/H875 mm -Weight: 3110 kg

Steel staircase, external staircase, machine staircase, machine access, extension staircase, machine platform -Manufacturer: Günzburger, Machine stairs, Machine access -Step size: approx. 600 x 260 mm -Height: upper step 685 mm -Permissible load: 200 kg -Number: 1x staircase available -Dimensions: 650/980/H210 mm -Weight: 14 kg

Workbench, clamping plate, ball roller table, ball table, ball roller table -Storage table: shelf with roller conveyor, mobile, height-adjustable -Plate: 2000 x 1000mm, thickness 3mm -Height: 980 to 1160 mm -Cut-out: 250 x 250 mm -Steel frame: solid with castors -Total dimensions: 2000/1000/H980 mm -Weight: 90 kg

Hydraulic pump, traction motor, drive motor, servo tank, hydraulic tank, servo oil tank -Manufacturer: Jungheinrich, servo tank hydraulic tank from pedestrian stacker type ERC 205 -Add-on parts: see photos -Number: 2x container available -Price per piece -Dimensions: 270/220/H370mm / 270/215/H360mm -Weight: 2.2 kg / 2.9 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: Rexroth, hydraulic pump from pedestrian stacker JungheinrichTyp ERC 205 -Gear pump: Type 0541 100 054 -Drive: 24V 3kW -Number: 2x unit available -Price per piece -Dimensions: 140/130/H330mm / 150/130/H330mm -Weight: 14.3 kg / 13.9 kg

Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller, fixed roller, swivel wheel, support wheel bracket -Support roller: Support wheel from Logitrans SGL 2000V pallet stacker -Wheel size: Ø 170 mm -Quantity: 1x support roller available -Price: per piece -Dimensions: 240/155/H275 mm -Weight: 14 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic module, PLC module, expansion module, plug-in card circuit board, operator panel -Manufacturer: Fanuc, plug-in card circuit board from CNC machining center Santenberg GTC S 2 -Type: A20B-2002-052 MES-1A -Extension module: Type: A03B-0815-C001 4 pcs. -Dimensions: 150/110/H30 mm -Weight: 0.2 kg

Granule dryers, compressed air dryers, continuous dryers, granule drying systems -Manufacturer: digicolor, Granule dryer type Dehumidifying Dryer -Model: DT 204 M -Power: 10000 W -Side channel blower: Siemens Elmo-G 1.5 kW -Individual components: see photos -Dimensions: 1020/610/H1550 mm -Weight: 241 kg

Rail wheel, flanged wheel, roller, track wheel, wagon wheel -Rail wheel: Flanged wheel with bearing -Wheel: Ø without flange approx. 200 mm, see photo -Run width: 40 mm -Axle diameter: 20 mm -Quantity: 3x wheels available Price: per piece -Overall dimensions: Ø230 x 145 mm (with axle bolt) -Weight: 5.6 kg/pc.