hermle c 20 used for sale

New hotbox in the industry standard for max. 200 bar and up to 28 liters per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min,; Control: CELOS X with Siemens 840D SL Operate Main drive 1Drive power (100% DC)33 kWDrive power (40% DC)40 kWSpeed range- 4000 rpmTorque (100% DC)580 NmMax. torque (40% DC)700 NmC-Axis Speed-4000 rpmTorque of C-Axis (holding torque)1100 NmAccuracy at point stopping0,001 degreeWorking areaSwing diameter over guide ways700 mmTurning diameter630 mmClamping chuck diameter max.400 mmDistance between spindles2260 mmBar diameter max.102 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69 ...

; Gross weight [kg]: 2350; Engine: 200; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 63A - 32A; Water Tank Volume [l]: 224

TOS chuck 200 mm

I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.

; Gross weight [kg]: 3621; Engine: Cummins 6CTAA9.5-G1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 640

; Gross weight [kg]: 2695; Engine: Cummins 6CTAA8.3G2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 470

CATERPILLAR/ MWM type TCG 2020 V12 -> 0.999 MWe. The engine and generator are fully operational. Engine mileage - approximately 33000h. Year of manufacture 2015; fuel: natural gas / biogas Generator: Manufacturer MARELLI MOTORI SP. A type MJB 500 MB4; CODE MJB5042K33380; No. MC 16586; year of manufacture 2015. Control cabinet complete with panel. Engine taken out of service with the customer in August 2022 due to the purchase of a new one. The engine has no visible signs of leakage. If interested, I can send a real -film on WhatsAp.

Available in stock 5 x Used Capstone Smart Proportional Valves. We have the following units available: - 3 x SPV Assy P/N 503044-200 complete with gaseous fuel valve P/N 506617-100 (Op. Press. 50 PSIG / Proof Press. 3500 PSIG); - 1 x SPV 25 24VOLTS P/N 511978-100R complete with gaseous fuel valve (Op. Press. 0-100 PSIG); - 1 x GSPV 12VOLTSD P/N 509736-100 complete with gaseous fuel valve (Op. Press. 75 PSIG / Proof Press 3500 PSIG): The unit are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Used bread line W&P -Refurbished- 1) Haton CR-59 Kegerundwirker, heated, lubrication, frequency control, automatic slide 2) Haton AF 2002 proofer, fully automated, digital control 3) Conveyor belt 4) Haton Combi U long roller table, very flexible 5) By-Pass tape to bypass the proofer, directly to the Combi U long roller The entire line is completely overhauled and in perfect condition! Warranty 6 months Please note: The V-300 dough divider is not part of this offer as it is already sold! Alternatively, a RHEON VX 202 Twin Divider can be offered for high-quality Artisan products.

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Dimensions: 10 x 88 mm -Length: 2000 mm -with: storage box -Weight: 13.2 kg

wire electrode, welding wire, welding wire -Eurotrode: Carbo 2002 -Diameter: 1.00mm -Price: per roll -Number: 3 rolls available -Dimension: O 300/100 mm -Weight per roll: 15 kg

Dough filling and dosing machine Rheon KN 200 Cornucopia used Rheon KN 200 dough filling and dosing machine.The machine has been tested for function, can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - Dough pieces: 10-300 gr. - Output : 10-60 pieces/min -digital control - Stainless steel cladding - rollable on wheels - used Rheon KN 200 for bakery confectionery

table length: 600 mm table width: 400 mm x-axis: 400 mm y-axis: 300 mm z-axis: 350 mm workpiece sizes: 900 x 630 x 350 mm volume: 490 L total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used steam boiler made by Cleaver Brooks, capacity 2000 kg of steam/1 hour and a pressure 9 bar. New 1997. Gas burner. Working medium steam, permissible temperature 178 degrees Celsius. Heated area 117 m2.

x-axis: 350 mm y-axis: 250 mm z-axis: 256 mm U-axis: +/-70 mm V-axis: +/-70 mm dimension of workpiece: 750x550x256 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.75 kW -Speed: 3000 rpm -Max. grinding wheels: Ø 200 x 32 mm -Operating voltage: 380 volts -Dimensions: 540/280/H1230 mm -Weight: 116 kg

Function generator, oscilloscope -Frequency range: 0.2 Hz to 240 kHz -Dimensions: 225/225/H85 mm -Weight: 1.2 kg

ype: KRAMER + GREBE MW 200 Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

• Stirring volume max. 200 l • Stirring speeds 100-1,000 rpm • Mounting plate 180 x 180 mm • Effective power 80 W • Max. Shaft torque 50 Ncm • Control unit Cimarec Telemodul 40 M (stirring start, stirring time, speed) • Mounted on a mobile stainless steel frame with inclined mounting plate with counter support (format part) for mounting a vessel with Ø 235 mm • Drive 230V/50-60Hz

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 6 mm -Price: per piece -Number: 2x available -Weight: 0.4 kg

- Bread Slicer Slicer & Bread Packing Machine -Manufacturer: P+S Mako Verpackungsmaschinen GmbH Pfitzenmaier & Söhne - Type packaging: Rianta 84-CSS/2000

SMI TEC COSMOS 2000 Digital Servo Drive / Servodriv NEW Quantity: 2 pieces Price: 2500 per piece

Sell a GUK folding machine Cartonac 2000-2 on behalf of a customer More information on request.

Disc valve, flapper valve, ball valve, butterfly valve, gate valve, gate valve, gate valve, sleeve valve -Gate valve: stainless steel sleeve valve type 2 CF8M 200 unused -Size: DN50 PN16 -Number: 15x sliders available -Price per piece -Dimensions: 100/100/H215 mm -Weight: 2 kg/pc.

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm -Weight: 9.5 kg

Transport trolley, order picking trolley, Corlette, furniture transport trolley, roll container, furniture Corlette -Manufacturer: Cordes, Furniture transport trolley - Corlette -Type: Folding and collapsible design -Load capacity: approx. 600 kg -Number: 11x transport trolleys available -Price: per piece -Dimensions: 2020/1150/H1800 mm -Weight: 91 kg/unit

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 -Quantity: 24 pieces available -Price: per piece -Dimensions: Ø 450 x 200 mm -Weight: 23 kg/pc.

Complete with intelligent random in feed system. As new condition

USED TETRA PAK TBA 19 200ML SLIM 20V COMPLETE FILLING LINE FOR SALE YEAR 2006 Item #: Usm-202 Category Tetra Pak TBA 19 TBA 19 200ML SLIM COMPLETE FILLING LINE Filling machine TBA/19 TBA 200 Slim, Version 20V, Year 2006, Working hours 29000 Straw Applicator Tetra Straw Applicator 21 Cardboard packer TCBP 70 Automatic palletisation unit Conveyors & Paper trolly

Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 123 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 202 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 252 , Generator Hz: 60 , Generator Volts: 480 , Generator Amps: 315 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/used-caterpillar-g3406-generat or-202-kva-gas/22424, , = More information =, , Empty weight: 7.500 kg, Type number: CATERPILLAR G3406 GENERATOR 202

Description: Eagle Systems CFM 106-20K Eco-Eagle Foil Module Consisting of: 1. Bi-directional differential shaft (x2) 2. Automatic pneumatic connection 3. SS Dual hardened helical gears both shafts 4. Quick release rubber module spreader rollers 5. Lower in-feed roller assembly for proper foil path 6. Heavy duty linear thrust bearings 7. Precise air transducers 8. Air pressure control sensor 9. PID closed loop air system control 10. Eco-Power” Minimal power servo motor control 11. Closed loop sensors for foil speed control 12. Fail safe closed loop sensors for multi foil roll control 13. Foil position encoder 14. Fail safe wiring system 15. Solid state relays 16. Mode indication by lights 17. Fully automatic control 18. Fail safe press guarding 19. Full Module guarding 20. Foil shaft lifting beam 21. All electrical and pneumatic controls contained within the modu ...

2012 BG-CAM Pro 2030 ATC Machine name: BG-CAM Pro 2030 ATC Procurement date: June 6, 2012 Machine type: portal milling machine - flat bed Control: Fagor 8055 Processing area: X approx. 3000mm | Y approx. 2000mm | Z approx. 300mm Machine table: 6-zone vacuum high-pressure table Spindle: HSD spindle | HSK 63 F | Max. speed: 24,000 rpm Electrical connection: see picture in the appendix. In 2021, various things were renewed. Such as, for example, Y-axis guide shoes, Y-axis bearing group, Y-axis driver bearing including gear and the Y-axis toothed belt. Measurement of the milling machine using a laser interferometer including storage of correction tables. The spindle was repaired at the end of 2018, has been around for a few years now and it shows. A repair is recommended there. Find more here - / Contact us at -

max. wheel diameter: 150 mm gear width: mm max. module: 4 min. module: control: Sinumerik 840 D table diameter: 140 mm maximum axial offset: 200 mm milling tool taper: ISO 40 diameter of hob: max. 130 mm cutter length max.: 220 mm milling spindle speeds (infinitely variable): 300 - 1200 U/min shifting: max. 170 mm milling head -swivable +/-: 45 ° feed speeds: 1 - 1500 mm/min rapid travel speed: 3000 m/min workpiece magazin: Stück max. workpiece diameter: im Magazin: 150 mm total power requirement: 50 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,7 x 3,6 x 2,6 m Condition: ready for operation: Video(s) available on our website.: Electric 400 Volt: Used gear hobbing machine, Pfauter, completely overhauled in 2023 by the specialist company SerWeMa. There is another identical machine available, but the spindle needs to be overhauled. If you are interested, you ca ...

Specifications: Maximum cutting width: 2050 mm Maximum cutting capacity steel: 0.5 - 4.0 mm Adjustable rip fence: 1050 mm Retraction function Cutting gap adjustment Working height: 1030 mm Dimensions (length x width x height): approx. 2500 x 1900 x 1750 mm Weight: approx. 3,6 tons

sheet width: 2040 mm plate thickness: 3 mm daylight upper clamping: 350 mm bending angle max.: 0-135 ° adjustment of lower and bend clamping: 80 mm control: Fastimatic M200 power requirement: 2,2/1,5 kW weight of the machine ca.: 2460 kg dimensions of the machine ca.: 3,2 x 2,8 x 2,1 m Condition: ready for operation: Condition: very good: CE signed: Video available on our website.: Electric 400 Volt: CNC-control with screen: Mot. back gauge: 1000 mm Foot switch: Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Little used machine, ver ...

Bobst Flexo 200 5 colours flexo printing machine for corrugated board 5 flexo printing units Prefeeder Automatic Delivery Machine is in a very good condition Available immediately Location: Western Europe Manufacturer: Bobst SA Switzerland Type: Flexo 200 Year of manufacturing: 1988 Max. Sheet size: 1270 x 2032 mm Min Sheet size: min. 600 x 520 mm Max. printing area: max. 2032 x 1270 mm Material thickness max. : 9 mm

Key data: 1800 KW, 2250 kVA, 415 V

Diesel Generator 5 x CAT 3516B 2000 kVA / 50 Hz – 2023 Never Installed Never installed, surplus CAT 3516B skid mounted diesel generating sets. Engine is coupled with 2000 kVA / 415 V / 50 Hz Leroy Sommer DSG 74L1 brushless synchronous alternator with a flexible coupling, and both mounted on a rigid base frame. These units are designed for standby and prime duty. Main engine control panel EMCP, 24V electric starting system. Technical data Engine type CAT 3516B – 16-cylinder, 1500 rpm diesel engine Alternator Leroy Sommer 2000 kVA / 415V / 50Hz Power factor 0.8 Manufacturing year 2023 Operating hours Zero, never installed Number of units available 5 pcs Prime rating 2000 kVA (1600 kW) Stand by rating 2240 kVA (1800 kW) Control system EMCP 4.2

Manufacturer: Walther + Cefla UV, Type: Pilot Signier + UV 2000, Spraying line: yes, Work piece width min-max mm: 1300, Spraying machine: Walther, UV dryers - 4 lamps (number): 1,

Manufacturer: Cefla, Type: UV 2000, Year: 2020, Work piece width min-max mm: 1300, Number of lamps: 2+1, Lamps inclined installation: yes, Lamps from below: 1, Conveyor lenght mm: 6500, Working widht mm: 1300, Conveyor lenght mm: 6500, Working widht mm: 1300, Required space L x W x H mm: L-6500, Year :2020

Manufacturer: Cefla, Type: UV 2000 M2/1600, Work piece width min-max mm: 1600, Working widht max mm: 1600, Number of lamps: 2, kW power 1 lamp: ca.12, kW power all lamps: 46,25, Lampen gerade eingebaut: 2, Lampen von unten: no, Adjustable: yes, Power per lamp watt UV: 80-120 unter<CRLF>vorbehalt, od distance mm: 80, Conveyor lenght mm: 3000, Outer belt width mm: 2800, Working hight approx mm: 60, Conveyor: Stange, Exhaust air diameter mm: 2, Working height in mm: +/--950, Feedin speed m/min: 5-15, Rod transportation: yes,

Parallel Lathe CAZENEUVE type HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Rotation: from 20 to 1600 RPM Turret TRIPAN 411 3-jaws chuck Ø 200 mm Spindle motor: 15 CV ThreadingsMetric + Whitworth TailstockCM5 Lubricant tank Lubricant pump Supplied with 3 TRIPAN tool holders Voltage: 380 V Length: 3500 mm Width with tank: 1500 mm Total height: 1400 mm Weight: approx 3 T

SPECIFICATIONS: Briquettes: Ø 60 mm Production: 70 kg/h Installed power: 7.5 kW EQUIPMENT: 1 mini silo

1). Filling Machine: SIG Combibloc CFA209-32 , year: 2004 2). Buffer Table: Meurer CM/HSP, year: 2006 3). Capper: SIG all Cap, ACF , year: 2004 4). Tray Packer: Meurer HTW Wrap around, year: 2006 Volume: 500 ml , 750 ml, 1000 ml Machine output: 9000 p/h

Cast iron bed 2600 x 2000 x 350 mm - No 1 Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Key data: 4000 mm, 2000 mm, 575 mm

Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2000 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles : 4,109,156,293 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2001 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :1,776,716,771 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2002 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :555,796,350 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -