hermle c 20 used for sale

The injector is a device for introducing brine solution through point injection of the raw product. Producer: Fomaco; Model: FGM 208 B; The machine has 208 needles (4mm diameter); The width of the tape is 740mm; The conveyor belt is not complete; Without brine filter; Length: 2300 mm; Width: 1200 mm; Height: 2300 mm; Weight: 1500 kg.

Turbomixer: 200 litres, make: Henschel, model: FM200A, stainless steel, engine: 37/43 Kw 2-speed 1500/3000 rpm. Electrical panel.

offer 22651 Rotor blade inside belt grinding machine Specifications: - mobile version with motorized forward - reversing + steering -Mot. Grinding stroke forward – reverse with speed regulation - Grinding stroke longitudinally forward + backward -Mot. Contact pressure - grinding pressure regulation - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel W 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in ...

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg

turning diameter: 1040/1900 mm turning length: 2000/3000/1250 mm swing diameter over bed slide: 740 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Make: EST-Ticino type: 520/2000 distance between centers min/max: 2000/3000 mm center height 520 mm Max. turning diameter over bed 1040 mm Max. turning diameter over support 710 mm max. turning diameter/length 1900 x 1250 mm spindle passage 135 mm with 3 jaw chuck with 4-jaw chuck quick change holder in very good and immediately ready condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rheon VX is a series of stress free dividers, which can divide most of doughs - even extremely moist. From rye tin bread to italian ciabatta flat bread (see photos for examples and our test products). The machine has been fully renovated in 2020 and is ready for work! Weight range: One row: 100 - 2000 gr two rows: 30 - 1500 gr Length range: 75 - 999 mm Max. cutting speed per row: 20 cuts per minute. If you find the machine interesting, let me know via phone, mail or whatsapp!

Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos

offer 22346 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - infinitely variable cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Foot switch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1300 kg

rotary table dia.: . mm max. dia. of grinding wheel: . mm with manual ongoing: . 0 manually feed: . 0 0.4 KW The technical Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/111 mm -Height: 24 mm -Hole circle: Ø 152/8 mm -Delivery of: steel/stainless steel cover plates possible -Weight: 0.5 kg/piece

Hydraulic pump, oil pump, gear pump, central lubrication, oil circulation system -Gearbox type: SK 20F-100 L/4 -Speed: 120 rpm -Drive motor: Nord -Hydraulic pump: unknown -Dimensions: 900/320/H300 mm -Weight: 119 kg

sheet width: 2000 mm plate thickness: 2 mm distance between columns: 2080 mm total power requirement: 2,2 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 3,0 x 1,2 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical lathe MORANDO 2000 for sale Technical data: - X axis: 1600 mm - Axial travel: 900 mm - Turning diameter: 2100 mm - Maximum turning height: 1350 mm - Platform diameter: 2000 mm - Maximum table load: 21000 kg - Spindle power: 75 Kw - Spindle revolutions/minute: 110 rpm

Max diam 250 , max lenght 2000, 3 x heads , change gears

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

Moving bezel, moving bezel, resting stick, lynette -Manufacturer: TOS for lathe type SUS80 -Max. Passage: Ø 200 mm -Plating: brass -Top height: 230 mm -Drawings for the photos -Quantity: 1 piece -Dimensions: 530/200/H740 mm -Weight: 100kg

Permanent magnet motor, electric motor, servo motor, spindle motor, permanent magnet three-phase servo motor, permanent magnet DC servo motor, DC spindle motor Manufacturer: Fanuc, DC Spindle Motor -Type: 3-S TG 6 -Shaft: Ø 42 x 110 mm -Dimensions: 830/220/H288 mm -Weight: 70 kg

Metronic Romex RFD 2000/4 Type: Stack Material: 20-250my all common materials printable Inking units: 4 Printing ink: Fuel or watercolor Cylinder circumference: from 250mm- 510 mm Cliché thickness: 2.84mm /1.14mm Inking units with doctor blade chambers Material width: 520 Print width: 520 Winder: pneumatic unwinding Dryer: Hot air Side edge controls: 2x BST Railway observation: BST Inline Corona 4,5KW SOFTAL Explosion protection

Depositor / In-Feed Conveyor for Horizon SPF 20A (new, never used with equipment)

Hole unit Horizon HP-20A (Condition - like new - hardly used) Art.: PS5567 specialized module for high-quality punching. The HP-20A module will be integrated into the Horizon brochure line between the Horizon SPF booklet maker and the Horizon FC trimmer. In normal brochure sewing mode, it acts as a simple transition tape. However, it is worth activating it on the central control panel, it is immediately included in the duty cycle.

sheet width: 2000 mm plate thickness: 20 mm pre-bending: 15/11 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m with initial rounding Technische Daten:/ technical details Biegelänge / bending lenght 2000 mm max. Blechstärke / max. sheet thickness 20 mm Anbiegeleistung / initial rounding 15/11 mm Walzendurchmesser Unterwalzen / roll diameter below rolls 280 mm Oberwalzendurchmesser / diameter of the upper roll 300 mm Antriebsleistung Hauptantrieb / drive capacity main drive 16,2 kW Antriebsleistung Anstellantrieb Oberwalze / drive capacity upper roll 4,8 kW Antriebsleistung Anstellsntrien Unterwalze / drive capacity below roll 3,7 kW Gewicht ca. / weight ca. 14200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The d ...

Ball Mill Vollrath EFC 200 Wet and dry grinding Ferrous grinding with steatite balls Lining hard porcelain Capacity 200 l Drive power 1.4 kW Speed 42 1/min 3 ball mills each mounted on steel structure Very good operational condition, directly from production!

sheet width: 2020 mm plate thickness: 2 mm control: Beijer daylight upper clamping: 100 mm Bending angle: 0 - 135 ° upper clamping drive: 0,375 kW bend clamping drive: 1,125 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3 x 1,1 x 1,75 m Foot switch with emergency stop: Segmented upper tool: Oil filling: exklusive Light barrier control: Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General Information SKU: 193 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 434 g Clamping force: 2,000 kN Screw diameter: 55 mm Spray pressure: 1650 bar Tie bar spacing: 520x520 mm Clamping plate size: 728x728 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Funnel: No Core train: Yes Euromap: Yes

turning diameter: 235 mm turning length: 200 mm turning speeds: 6500 U/min control: Siemens 840D swing diameter: mm turning height: mm workpiece height max.: 100 mm spindle bearing diameter: 90 mm spindle head: A5 total power requirement: 41 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 16 , 20 , 400

Hood unit 20 kVA PRP Power: 20 kVA / 16 kW PRP Operating mode: 1500 rpm Voltage: 400/230 V Power factor: 0.8 Stage 3A Engine: Deutz | F3M2011 Generator: Leroy Somer | TAL040 F Aggregate control: Automatic control panel WITHOUT Switching and WITHOUT mains control with Comap IL-NT AMF8 1 x 4-pole circuit breaker Leak detector Battery disconnect switch Battery charger Cooling water heating Voltage regulator Tank: 100 L / 21.3 hours at 75% load

Boiler Lifting Tipper Kemper HK 200 R - Boiler tipper Kemper - Model: HK 200 R - for Kemper 150 AL boiler - with boiler drive and boiler shearer - Built in 2005 - Total height 312cm

MEMBRANE SKINNER, MAJA, MODEL: EVM 2000 Technical description: Serial number: 38280 Power supply: 380 V, 3 Ph, 50 Hz, 2.2 A, 0.75 kW Working widht: 420 mm Dimensions: 700 X 700 X 1000 mm

Slotting machine Elmass for wedge tracks from 2.5-14mm. Thanks to the bore-guided tool, even extra-long keyways can be pushed. Tools for standard holes of 6-50mm and groove widths of 2.5-14mm are available. Wedge tracks in blind holes are also possible. Multiple wedge tracks thanks to the 400mm rotary table are feasible.

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/142 mm -Height: 20 mm -Hole circle: Ø 171/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 192x pillows available -Price: per piece -Weight: 0.3 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outside/Inside: Ø 300/202 mm -Height: 20 mm -Hole circle: Ø 250/10 mm -Delivery of: steel/stainless steel cover plates possible -Number: 71x pillows available -Price: per piece -Weight: 1 kg/piece

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Piston rod: Ø 20 mm -Stroke: 200 mm -Dimensions: 75/75/H500 mm -Weight: 3.9 kg

Muffler, exhaust system, muffler, silencer -Nissan -Type: 20100-L9210 -Dimension: Ø 210/645 mm -Weight: 8.65 kg/net

Lathe Manufacturer: Schaerer Model: UN 200 Center distance: 1600mm

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 12.5 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 14 kg

Complete Natural Gas power plant based on 2 x MWM 2032 V16 gensets with 4300 KW each, for a total of 8600 KW, with heat recovery boiler and heat exchangers.

Complete Natural Gas power plant based on a MWM 2032 V16 gensets with 4300 KW, with heat recovery boiler and heat exchangers.

adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer: ABM -Gearbox manufacturer: ABM -Motor power: 0.37 kW -Speed: 45 rpm -Construction: B3 -Drive shaft: Ø 30 mm -Protection class: IP 44/54 -Dimensions: 550/230/H195 mm -Weight: 30 kg

Working width: 4000 mm Working height: 2600 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center hole ...

Electronically controlled, programmable roller feed for advancing and precise positioning of strip material SIEMENS® PLC – Control Largest sheet strip width 200 mm (optionally up to 800 mm) Sheet thickness range 0.8 to 3 mm Steel sheet 400 N/mm² - (optional thicker sheets on request) Rollers Ø 95 mm Maximum practical feed rate in operation with eccentric presses: 120 strokes per minute with a maximum feed length of 80 mm per stroke

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: 200x3-III -TGL: 30-2332 -Chuck size: Ø 200 mm -Weight: 16.7 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: B200x3x6 -TGL: 30-2332 -Chuck size: Ø 200 mm -Cone: Ø 104 mm -Hole circle: Ø 132 mm -Through hole: Ø 54 mm -Weight: 15 kg

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

pressure: 100 t chamfer lenght: 2050 mm control: CYBELEC DNC 880S weight: 8000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 32 mm -Speed: 3000 rpm -Engine power: 0.9 kW -Operating voltage: 380 volts -Dimensions: 1100/540/H1140 mm -Weight: 125 kg

Screwdriver Alcoa Year of construction: 1991 Type: DC 2090ZS Control: Siemens S5 Capacity: up to 50,000 bhp

Kettner Type: Pressant 2000EP Model: Box Depalletizer Year of construction: 1990 Capacity: max 40 pallets/pcs.