hermle c 20 used for sale

used for dried apple products, Format set for stand-up pouches with a surface area of approx. 100 x 60 mm available., consisting of:, Vibration - Shaking Table for the task of filling the products, Z-Elevator, Blue smooth belt with carriers Usable width: approx. 380 mm, Belt length straight inlet: approx. 1,200 mm Overhead conveyor section: approx. 2,660 mm, Straight section above: approx. 1,200 mm Carrier height: approx. 65 mm Distance between carriers approx. 200 mm Feed height: approx. 430 mm, With corresponding stainless steel frame, Multihead weigher Ishida Optima CCW-EM-214, built in 2003, 14 heads, mounted on base frame, operator unit, digital display, printing unit,, Z-Elevator, same design as described above, Form-fill-wrapping machine Kopas JK 200 F-M-R Servo, year 2017

Kilia Supreme Cut 200 ltr., 200 liters bowl cutter, bowl and bowl-cover stainless steel, year of manufacture 2011, hydraulic noise reduction cover, knife shaft brake electrically operated, separate stainless steel electric control cabinet, membrane keyboard, variable bowl speed, variable knife speed, variable mixing speed forwards and reverse, cleaning system, knife head with 6 knifes, hydraulic loading device for 200 liter bins, hydraulic unloader. You are very welcome to inspect and test the machine.

Cutter K+G Wetter CutMix 200 STL with load for 200 liter standard car and ejector, 200 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely adjustable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, K+G weather CM 200 STL

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 20ft (6m) office container - 20ft (6m) sanitary container Special versions such as Double Door, Flat or Open Top are always available at short notice. Sightseeing is possible at any time and at short notice, for this we ask for a short telephone arrangement. Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof hardwood floor. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can theref ...

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 409399-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tr ...

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tra ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1224 Drive: 3 buerstenlose brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse clearance maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 2800 x 1340 mm travel distances: X=2400mm; Y=1200mm; Z= 130 mm contact sensors / reference switches / limit switches on all axes Double secured emergency trigger energy chains for clean cable flush Total mass with motors : LxWxH approx. 3070 x 1800 x 1420 mm Fraes ...

CANDY RECYCLING AD 2000 made in 2015 for recycling of Rework from hard candy production suitable also for jelly, toffee, lollies, fondant even wrapped products result after recycling: completely transparent and neutral sugar-glucose syrup-water solution consisting of: dissolving machine intermediate/buffer tank, volume 2000 L with platform horizontal rotary drum vacuum filter unit year 2015 very good condition

Cast iron clamping cube Dimensions(only the cube): L 2000 x H 1500 x Depth 1200 mm 4 faces with T-slots T-slots dimensions: 58 x 36 mm Total height with enhances angle plate: 2050 mm Total height with rail: 2700 mm Weight: approx 7 T MACHINE IN OUR STOCK IN FRANCE.

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.

Showroom machine / exhibition machine CMS Tecnocut - IDROLINE S 2040 Axle experience: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 200 mm C-axis: endless B-axis: +/- 60° Facilities: - 5-axis cutting head JD5Ax for inclined cuts up to 60° and automatic angle correction - Chain conveyor for automatic sand application - Automatic lifting doors to secure the working area - Sand dosator for automatic software controlled sand dosing - Central lubrication - Altitude probe with anti-collision system High pressure pump Greenjet Electric high-pressure pump with directly controlled servo motor Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min DÃ?SE: 0.40 mm max. Incl. assembly / training and 12 months warranty!

CMS Tecnocut Easyline Cutting range / axis experience: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 150 mm Uiaw3u8 C-axis: 630° B-axis: +/- 60° Included equipment: - 5-axis snow head incl. angle correction - Sand dosing and vacuum monitoring - Height scan - CAD/CAM - Laser - Central lubrication CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical data Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min Opening diameter DÃ?SE: max. 0.40 mm The pressure translator with directly driven servo motor offers the following advantages: + Energy efficient + Proportional power consumption + no maintenance-free hydraulics + 75 dBA + Low maintenance due to 60% less structural components + internal water pump + ...

LENGTH :17200M DOUBLE GIRDER

CNC Lathe Gildemeister CTX 200 Series 2 Immediately free from location: CNC Lathe Gildemeister Type CTX 200 Series 2 Built in 2001 Operating hours 39,000 CNC Control Heidenhain 4290 TP Turning diameter 210 mm Turning length 305 mm Reiststock revolver 12 driven tools Conveyor Bar loading magazine Max travel plan 160 mm Max travel length 350 mm Spindle speeds up to 5000 rpm 2 simultaneous axes with C axis 1 controlled spindle 12 driven tools Collet pliers with hydr. Hollow clamping device up to 43 mm Workpiece pick-up device up to 56 mm very many tools

Extraordinary precision Milling, engraving or cutting is possible with the highest precision, due to the high-quality inclined toothed racks installed on each axis. Ideal for processing plate material With the large machining area, the T-Rex is the best possible choice for milling plate materials, as well as for text or image engraving on 2D, 2.5D or 3D workpieces. Thanks to a assembly aid on the short side of the CNC milling machine, the work surface can be ideally and comfortably equipped with the plate material. The ball rollers allow an effortless glide of the plates. External dimensions LxWxH: 3780x2850x1950 mm Weight: circa 1950 kg Clamping surface XxY: 3030x2020 mm Travel XxYxZ: 3000x2000x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: approx. 0.015 mm Working speed: 12000 mm per minute  ...

grinding diameter: 5 - 255 mm grinding length: 300 mm centre height: 130 mm grinding length at plunge grinding: 50 mm control: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/min work piece spindle speed: 0 - 500 U/min feed of grinding spindle slide cross: 0 - 5000 mm/min table speeds: 0 - 5 m/min grinding wheel diameter: 450 mm total power requirement: 10 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Didar Part Number 0697210002 NSN 12-334-9607 Original Part Number 0020984020 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 17 Lt. Amount of Air Outside the Pipe 63 Lt.

Didar Part Number 0697210001 NSN 12-334-8788 Original Part Number 0020984220 In-Pipe Water Pressure 3 – 4.5 bar Out of Pipe Air Pressure 4.5 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 10 Lt. Amount of Air Outside the Pipe 44 Lt.

Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.

Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of D153928 Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.

Condition: Very good condition

Collectors' Item! Vertical Reproduction Camera 220V / 2550W / 50-60cycles (Hz) Dims L130 x W120 x H170 cm - 285 kg

We offer for sale a Cummins gas CHP 2000 KW. Specifications Engine: Cummins Type: D67 Power: 2000 KW Year of construction: 2007 Revolution: 1500 1/min Generator: Stamford Power: 2650 KVA Voltage: 380 V Frequency: 50 Hz Operating hours: 59,000 h

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece

Technical data of Used Universal cylindrical grinding machines Cometa HSP 2000: Wheel diameter: 762 mm Max diameter working: 800 mm Center height: 410 mm Working lenght: 2000 mm Wheel power: 15 hP Weight: 11 ton

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, sorting belt, sorting conveyor belt, readout conveyor belt -Side walls made of: stainless steel -Speed: 118 m/min -Drive: 0.75 kW -Belt width: 590 mm -Length: 2000 mm -Transport dimensions: 4360/1170/H1170 mm -Weight: 684 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm -Piston rod: Ø 40 mm -Dimensions: 330/280/H510 mm Total weight: 33 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg

Clip guide plate 36br and deflector for clipping machine FCA 160 Poly Clip Item Number : Clip guide plate - 200623 Deflector - 162262 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

Can depalletizer Kahl & Schlichterle type can DP 20000 capacity: up to 20.000 cph The palletizer is adjustable for one pallet size (has to be clarified) incl. manual loading per forklift construction in stainless steel pallet lifting system automatic carboard layer removal layer magazine control panel incl. Siemens S 7 The can depallitizer will handle two pallet formats and five different can sizes

CNC Manufacturing Center Mill 2000 Commissioning 2007 4 - 5 axis machine Siemens 840 D Commuting X axis 2000 mm y axis 500 mm Z axis 550 mm 40 tool slots Rigid table with chip tray Clamping surface 2600 mm 550 mm with 3 T-slots High-speed package Rapid traverses 60 m/min Speed 20 - 12,000 rpm Coolant pump 30 bar 900 liters 2 extraction units as air purifiers Automatic grease lubrication 2x Rinsing gun Single-shift operation Spindle has been renewed and much more. The machine can be viewed under power

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 300 V 165 Hz -Power output: 25 kVA -Dimensions: 800/400/H320 mm -Weight: 200 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 165 V 300 Hz -Power output: 25 kVA -Dimensions: 800/400/H320 mm -Weight: 224 kg

Inductive conductivity transmitter, conductivity transmitter, conductivity measurement -Manufacturer: EH Endress + Hauser, conductivity transmitter -Type: conducta XR 2 -Measurement range: 0 to 200 mS -Voltage: 220V 50/60Hz -Dimension: 180/95/H95 mm -Weight: 0.8 kg

Cycle-controlled lathe Dimensions: 4000 x 2300 x 1800 mm Weight: 4800.00 kg Description: Cycle-controlled lathe with large hollow spindle and high speed, with FAGOR 8055 TC CNC control. Specifications: Turning diameter over bed: 580 mm Turning diameter in the offset: 800 mm Offset length from spindle nose: 280 mm Turning diameter over support 305 mm Center height 290 mm Hollow spindle diameter usable: 80 mm Female thread at spindle end: M85xP1.5 Center width 2200 mm Spindle Spindle speeds: infinitely variable in 2 stages, automatic switching! Level 1: 80 - 750 rpm Level 2: 750 - 2400 rpm Spindle nose: DIN 55026 - A 1/ 8 Recommended chuck size: 250 mm diameter Largest workpiece weight (with steady rest): 2000 kg Feed spindle bearing: 120mm iD/OD Rear spindle bearing: 110mm iD/OD Spindle motor power S1 (100%) / S2 (40%):  ...

Centrifugal pump, water pump, block pump, volute casing pump -Manufacturer: Ebara, centrifugal pump type CDXHM/A 200/20 -Flow rate: 80-250 l/min -Motor power: 1.5 kW -Speed: 2850 rpm -Pipe connection: see photos -Dimensions: 445/210/H240 mm -Weight: 15.7 kg

Pneumatic cylinders, air cylinders, standard cylinders, compressed air cylinders -Manufacturer: SMC, pneumatic cylinder double version each open on one side -Type: C95SDB 80-200 -Piston rod: Ø 25 mm -Stroke: 200 mm each -Pressure: max. 10 bar -Dimensions: 653/195/H130 mm -Total weight: 13.9 kg

PLC controller, central assembly, RAM, CPU, central processing unit, central device Manufacturer: Siemens, Simatic central assembly -Type: ET 200SP F-CPU 6ES7512-1SK01-0AB0 -Dimensions: 100/80/H120 mm -Weight: 0.4 kg

ID3411 Crane Repair Spreader for 20ft Container year/Baujahr 2016 - brand new, unused 1.5 t Spreader to move sea container 20Ft, SWL: 40.000 Kg, is completely new never used Move spreader to sea container 20Ft, SWL: 40,000 Kg, is completely new never used

The Colchester Combi 2000 has been overhauled and is in very good condition. Spindle motor power: 7,500 W Year of Make: 1998

Key data: 160 KW, 200 kVA

We currently offer: Number 41 Cummins generator set Type: 6CT Generator LeRoy Somer Type: LSA 46.1 M5 Power: 200 KVA / 160 KW Year of manufacture generator 1999 / engine 2004 Hz 50 RPM 1500 AVR control R448 IP 21 Hours: 8505 Metrics: L: 3.30m W: 1.25m H: 1.95m Weight: approx. 2000 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Five axis machining centre CME QUICK 200 CNC - 2000x1000x1300 mm, 18.000 rpm, CNC SELCA 4045PD, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2100x850 mm, Longitudinal travel x axis: 2100 mm, Cross travel y axis: 1000 mm, Vertical travel z axis: 1300 mm, Cnc: SELCA 4045 PD, Spindle motor power: 26 Kw, Spindle speed: 18000 rpm, Spindle taper type: HSK 63, Automatic tools change nr.: 20, Approx net weight: 18.000 kg, Accessories: Continuos round table 800 mm, coolant thrugh spindle 15 bar, electronic handwheel SELCA SILBOX 2, chip conveyor

Bridge type Machining Centre NICOLAS CORREA EURO 2000 - 18.000 rpm - capacity 2000x1250x650 mm, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2000x1000 mm, Longitudinal travel x axis: 2000 mm, Cross travel y axis: 1250 mm, Vertical travel z axis: 650 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 30.000 mm/1, Rapid feed x-y-z axes: 30.000 mm/1, Spindle taper type: HSK 63, Automatic tools change nr.: 40, Spindle speed: 0- 18.000 rpm, Spindle motor power: 20 Kw, Cnc: SELCA 4045, Approx net weight: 20.000 Kg, Accessories: through-spindle coolant, chip conveyor

Stock number: 3975 PROCESSING Manufacturer: CHEVALIER, Type: 2040 VMC Machine NO.: MC925B02, Year of manufacture: 2003 Specifications: Table size 1200 x 450 mm Longitudinal movement (X) 1020 mm Transverse movement (Y) 500 mm Vertical movement (Z) 500 mm Spindle Taper 40 ISO Stepless spindle speeds 8000 rpm Spindle motor 7.5 Kw Total power 15 KVA Tool changer 20 places Control Fanuc 0M Fabr. Operating hours spindle 4032 hours Length: 2350 mm, Height: 2650 mm, Width: 2750 mm, Weight: 5800 kg

Key data: 800 KW, 400 V

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Manufacturer: Cefla, Type: TR 2000, Year: 2015, incl.control: yes, Length-width mm: 20000x1300, Programming possible: yes, Length mm: 2000, Working widht mm: 1300, Total hight mm: 900, Conveyor speed m/min: 20, Drive power kW: 0,8, Year :2015

Manufacturer: Cefla, Type: 2015, Year: TR 3000, incl.control: yes, Length-width mm: 3000x1300, Length mm: 3000, Working widht mm: 1300, Total hight mm: 900, Conveyor speed m/min: 20, Year :TR 3000

Manufacturer: CEFLA, Type: TB 2000, Year: 2015, Control: yes, Working length mm: 2000, Working widht mm: 1300, Total hight mm: 900, Total hight mm: 900, Engine power kW: 0,8, Feeding speed min-max m/min: 20, Required space L x W x H mm: 2000x1300x900, Weight approx. kg: ca. 300, Year :2015

ALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil sealing machine 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - Extra 4) Storage device for wrapped packages - Extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos