hermle c 20 used for sale

General SKU035B228 MakeCoti SRL Curnasco No.206 Year of construction1999 LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume3200 Ltr. Motor1.5 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4301 (304) Stainless Steel Reactors Reactor(1x) Capacity3200 Ltr Vessel sizesdia. 1200x2300mm Dished bottomcheck Dished top sidecheck Top connections(6x) Outletdia. 50mm Half coil jacketed(130 Ltr) Max. temperature210 Degr. C. With paddle stirrermake Mariotti & Pecini, type ART 20/30/56 Motor± 1,5 KW, 380 Volt (Ex) Speed mixing shaft± 56 Rpm Information Floorspace1,8x1,8 M Total height4,0 M ATEX compatiblecheckCatalysts & fillersSolventsDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsStainless Steel ReactorsLubricants & oleoSolid pharmac ...

General SKU065W321 MakeDe Dietrich TypeCE-2500 No.55288 Year of construction1985 LocationBarneveld Material Lining materialGlass - Enamel (3130) Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume2500 Ltr. Motor7.5 KW Specified Features - Glass-lined Reactor Reactor(1x) Capacity2500 l. (3235 l.) Vessel sizesø 1600 x 1859 mm Dished bottomcheck Dished top sidecheck Manholeø 350 x 450 mm Top connections4x ø 100mm, 2x ø 200 mm Outletø 100 mm With jacketcheck 352 l. Max. temperature—10 / 200 °C With propellor stirrercheck Impeller Motor7,5 kW, 380 Volt (Ex) Speed mixing shaft± 23—120 rpm Information Floorspace2,4x2,4 M Total height4,5 M Weight4400 KG Technical specs Extra informationcheckCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid p ...

General SKU221S092 MakeTycon (It) Type6300 ltr. No.3950 Year of construction1990 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialGlass Volume6300 Ltr. Motor18.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7595 ltr. (nett 6300 ltr) Vessel sizesdia. 2000x2800mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connectionsDN150 (5x) DN250 (2x) OutletDN150 With jacket(695 ltr.) Max. temperature-30/200 degr. C With paddle stirrercheck Motor18,5 kW 380 Volt (Ex) Speed mixing shaft30-120 rpm Glass Reactors MaterialGlass Information Floorspace2,6x2,6 M Total height5,7 M Weight8500 Kg ATEX compatiblecheckCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIGlass-lined ReactorsAgrochemicalsB ...

General SKU068Y407 MakeChemap AG Männedorf No.9-2428 Year of construction1983 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume300 Ltr. Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactor/Fermentor Capacity300 Ltr, Useful capacity 200 Ltr Vessel sizesdia. 700x750mm, Flat top side Dished bottomcheck Manhole/hand hole Top connections(6x) Outletdia. 30mm With jacket(15 Ltr) Max. temperature130 Degr. C., With vibro-stirrer type E3 Motor220 Volt Information LocationBarneveld Floorspace1,0x1,0 M Total height2,3 M Technical specs Extra informationFlat top sideCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsStainless Steel ReactorsLubricants & o ...

General SKU239T284 MakeGuttridge TypeScrew Conveyor Mach.No.580194-3-1 sc6.2 Year of construction2013 Main Features Motor5.5 KW Length4700 mm Inlet diameter400 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Trough-typecheck Diameter460 mm Length4700 mm Between inlet and outlet3900 mm Shaft diameter150 mm Pitch325 mm Inletdia. 400 mm Outletdia. 300 mm Motor5,5 kW 400/690 Volt Screw speed89 rpm Outlet height1400 mm Height between in- and outlet1400 mm With coverscheck Information LocationBarneveld Mounted on wheelscheck Floorspace5,8x0,9 m Total height1,4 m Weight1600 kg CEcheck Extra Specificationswith a rail system Technical specs Extra informationScrew blade thickness 6 mmCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFo ...

General SKU239T285 MakeGuttridge Mach.No.0580194-1-1 Year of construction2013 Main Features Motor18.5 KW Length6500 mm Inlet diameter390 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter720 mm Length6500 mm Between inlet and outlet5850 mm Shaft diameterdia. 200 mm Pitch500 mm Inletdia. 390 mm Outlet530x420 mm Motor18,5 kW Screw speed33 rpm Height between in- and outlet1500 mm With coverscheck MaterialStainless steel Information LocationBarneveld Floorspace7,5x1,8 m Total height1,5 m Weight2800 kg CEcheck Technical specs Extra informationScrew blade thickness 6 mmCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBi ...

General SKUR0472 LocationBarneveld CEcheck MakeTMT (CZ) TypeSF625/2 Main Features Motor3 KW Length1632 mm Inlet diameter220 mm Specified Features - Vertical screw conveyor Vertical conveyor screwcheck Tube-modelcheck Diameter190mm Length3026mm Between inlet and outlet1632mm Shaft diameter65mm Pitch150mm Inletdia. 220mm Outletdia. 211mm With adjustable packing glandscheck Motor3 kW 230/400 Volt (Ex) Screw speed87 rpm MaterialStainless steel 1.4301 (304) Information No.3807/02 Year of construction2011 Floorspace0,9x0,5 M Total height4,0 M Weight300 Kg ATEX compatiblecheckCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIVertical screw conveyorsPlastic & ...

General SKUR1191 MakeTechnoglass Spa (IT) LocationBarneveld Type6300 L Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket7 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume7590 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7590 Ltr (nett.6300 Ltr) Vessel sizesdia.2000mm x3050mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connections2x DN250, 5x DN150 OutletDN150 With jacket(700 Ltr) (16,6 m2) Max. temperature-30/200 Degr.C. With paddle stirrerHastelloy C4/C22 Motor15 kW, 400 Volt (Ex) Speed mixing shaft6.9-69rpm Glass Reactors MaterialGlass - Enamel Information No.5785 Year of construction1996 Floorspace2,5x2,5 M Total height5,0 M Weight8500 Kg ATEX compatiblecheckCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmace ...

General SKUR0891 LocationBarneveld MakeLe Carbone-Lorraine AG (FRA) TypePolyblock NF610G Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16.3 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Graphilor XBS Heat exchangercheck Verticalcheck Heating surface16.3 m2 Tube capacity80 Ltr Max. temperature165 degr.C. Shell capacity90 Ltr Shell diameter662mm Shell length1370mm Max. temperature165 degr.C. Shell connections2x DN150 Cover connections2x DN200 Capacity93.8 ltr. Information No.17474 Year of construction1996 Floorspace0,9x0,9 M Total height1,8 M Weight1500 KGCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDai ...

General SKU035B239 MakeCoti SRL Almè (BG) No.0163 Year of construction1996 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume10000 Ltr. Motor1.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity12.303 Ltr ( netto 10.000Ltr) Vessel sizesdia. 2200x2400mm Dished bottomcheck Dished top sidecheck Manholedia. 450mm Top connections(11x) Outletdia. 100mm Half coil jacketed(508 Ltr) Max. temperature210 Degr. C. With gate type stirrerequipped with scrapers Motor1,5 KW, 220/380 Volt (Ex) Speed mixing shaft± 2 Rpm Stainless Steel Reactors MaterialStainless steel 1.4301 (304) Information LocationBarneveld Floorspace2,8x2,8 M Total height6,3 M ATEX compatiblecheck Extra Specifications- Stirrer make Mariotti & Pecini, type ART 20/34.8/2 (= 2 Rpm) Cata ...

General SKU012Y113 MakeAPV Chimie Equipement S.A. TypeM-40 SL No.3734 Year of construction1991, Reconditioned in 2003 by RPA Process LocationBarneveld Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialMild steel Volume250 Ltr. Motor45 KW Specified Features - Z-blade mixer MaterialMild steel Z-blade mixer(1x) Capacity400 Ltr, Useful capacity 250 Ltr Trough sizes840x700mm With covercheck With jacketcheck Max. temperature100 Degr. C. Single gearedcheck With adjustable packing glandscheck Motor45,0 KW, 380 Volt (Ex) Arm speed± 15/20 Rpm Hydraulic tiltingcheck With hydraulic unitcheck Information Floorspace2,2 x 2,8 M Total height1,8 M Weight4700 KG ATEX compatiblecheckCatalysts & fillersFeed additivesPaper & otherDiscountZ-blade mixersDetergent & surf.Other pharmaceuticsCosmeticsSugarLubricants & oleoAnim ...

General SKU071F416 LocationBarneveld MakeCarl Canzler GmbH & Co. Düren TypeSpiral heat exchanger No.5967 Material Tube materialStainless steel Pressure Vacuum possiblecheck Working pressure shell5 Bar Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity31/21 Ltr (Channel A/B) Max. temperature160 Degr. C. Information Year of construction1986 Floorspace0,8x0,6 M Total height0,8 M Weight150 kgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharm ...

General SKU012Y116 MakeAPV Chimie Equipement S.A. TypeM-40 SL No.3714 Year of construction1990, Reconditioned in 2003 by RPA Process LocationBarneveld Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialMild steel Volume250 Ltr. Motor45 KW Specified Features - Z-blade mixer MaterialMild steel Z-blade mixer(1x) Capacity400 Ltr, Useful capacity 250 Ltr Trough sizes845x700mm With covercheck With jacketcheck Single gearedcheck Motor45,0 KW, 380 Volt (Ex) Arm speed± 15,5/20,0 Rpm Hydraulic tiltingcheck With hydraulic unitcheck Motor1,5 KW, 220-240/380-415 Volt (Ex) Information Floorspace2,2 x 2,8 M Total height1,8 M Weight4600 KG ATEX compatiblecheckCatalysts & fillersFeed additivesPaper & otherDiscountZ-blade mixersDetergent & surf.Other pharmaceuticsCosmeticsSugarLubricants & oleoAnimal feedOther feedSolid  ...

General SKU255T403 MakeManesty (UK) LocationBarneveld TypeAccela-Cota 10 Main Features MaterialStainless steel Motor0.55 KW Inlet diameter280 mm Specified Features - Coating pan Coating pancheck Coating installationcheck Batch size15 kg Pan diameterdia. 610 mm Pan depth440 mm Cylindrical width280 mm In-/Outletdia. 280 mm Motor0.55 kW (400 V) With frequency controllercheck Pan speed6 - 30 rpm MaterialStainless steel 1.4552 Information No.1001N0 Year of constructionunknown With switchgearcheck(as is) Floorspace0,8 x 1 m Total height1,8 m Weight550 kgCoating pansManestyCoating pans > Coating pansBrand > Manesty What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barnevel ...

General SKUR1200 MakeDe Dietrich & Cie (FR) LocationBarneveld Type6300 ltr. Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket7 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume6300 Ltr. Motor11.2 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7385 Ltr (nett.6300 ltr) Vessel sizesdia.2000x3060mm Dished bottomcheck Dished top sidecheck Manhole350x450 Top connections2x DN250, 5x DN150 OutletDN150 With jacket(735 Ltr) Max. temperature-30/200 degr.C. With propellor stirrercheck Motor3,07/11,2 kW 380 Volt (Ex) (402/1465 rpm) Speed mixing shaft32 / 116 rpm Glass Reactors MaterialGlass - Enamel (3008) Information No.55158 Year of construction1985 Floorspace2,5x2,5 M Total height4,8 M Weight8500 Kg ATEX compatiblecheckCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants  ...

General SKU410S987 LocationBarneveld MakeNema Main Features Motor5.5 KW Length5125 mm Inlet diameter265 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4552 Horizontal conveyor screwcheck Tube-typecheck Diameter250 mm Length5700 mm Between inlet and outlet5125 mm Shaft diameter140 mm Pitch240 mm InletDia. 265 mm OutletDia. 245 mm With adjustable packing glandscheck Motorcheck Screw speed76rpm With coverscheck Information TypeRS 0250 x 05700 - Kusae Mach.No.50.993-001 Year of construction1997 Floorspace6,7 x 0,9 m Total height0,8 m Weight1060 kg Extra SpecificationsThis conveyor screw is equipped with a new motor and reducer. Catalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharm ...

General SKU239T286 MakeGuttridge Mach.No.0580194-7-1 Year of construction2013 Main Features Motor18.5 KW Length5000 mm Inlet diameter390 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Trough-typecheck Diameter700 mm Length5000 mm Shaft diameterdia. 200 mm Pitch500 mm Inletdia. 390 mm Outlet650x400 mm Motor18,5 kW Screw speed33 rpm Height between in- and outlet1500 mm With coverscheck Information LocationBarneveld Floorspace7,3x1,7 m Total height1,40 m Weight3000 kg CEcheck Extra SpecificationsSynatel level control, type digimatic, Schmersal sensors Technical specs Extra informationScrew blade thickness 6 mmCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectioner ...

General SKU235K162 LocationBarneveld MakeAZO GmbH + Co. Osterburken TypeTrogschnecke TFS-315 G B A21 Main Features Motor2.2 KW Length2000 mm Inlet diameter315 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screw(1x) Trough-typecheck Diameter315mm Length2000mm Between inlet and outlet± 1450mm Shaft diameter90mm Pitch145/290mm Inletdia. 250mm Outlet2x dia. 300mm Motor2,2 KW, 230/400 Volt Screw speed± 76 Rpm With coverscheck Information Mach.No.408691 Year of construction2004 Floorspace2,9x0,5 M Total height0,6 M Weight260 KGCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorgan ...

General SKU202P126 MakeHosokawa Nauta BV Haarlem TypeMBXU-20 RVW Mach.No.M18666 Year of construction1973 Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket0.4 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor15 KW Specified Features - Conical dryer Conical dryercheck Capacity2000 Ltr Largest cone diameter1980mm Cone height3000mm Dished topcheck ManholeDN500 Stainless steel armcheck Motorarm 0,75 KW, 380 Volt Motorschroef 15,0 KW, 380 Volt Bottom bearing cross couplingcheck With jacket(8 m2) Max. temperature100 degr.C. Bottom outlet(1x) dia.150mm (1x) dia.75mm MaterialStainless steel 1.4301 (304) Information LocationBarneveld Floorspace2,1x2,0 M Total height4,85 M Weight3000 KGCatalysts & fillersFeed additivesPaper & otherOther pharmaceuticsSugarConical dryersAnimal feedOther feedSolid pharmaceuticsAPIMinerals & inor ...

General SKU253N349 MakeChaudronnerie ABF No.K 62 200 Year of construction1992 Mounted on legscheck Pressure Working pressure3.9 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4401 (316) Stainless Steel Reactors Reactorcheck Capacity2500 Ltr Vessel sizes+/- dia.1400x1300mm Dished bottomcheck Dished top sidecheck Manholedia.350mm Top connectionsdia. (6x)120mm, (1x)200mm With jacketcheck Max. temperature20/250degr.C ,-25gr.C/250degr.C With paddle stirrercheck Motor5,5 KW, 230/380 Volt Information LocationBarneveld Floorspace2,0x2,0 MCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsStainless Steel ReactorsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicPlastic & p ...

Overview This crossflow filtration system was manufactured in 2006 by Germany Sartorius. The Sartoflow Compact 12 is designed for the gentle clarification of liquids, particularly in wine and beverage applications. The machine is still installed. Information regarding availability, visit possibility, maintenance history and reason for sale is Not provided. The system features a modular design with up to 12 filtration modules, of which 10 modules are functional and 2 modules are defective. Technical data  Capacity: approx. 3,600 – 12,000 L/h Application: Liquid clarification (wine and beverages) Configuration: Crossflow filtration system with hollow fiber membranes, up to 12 modules (10 active) Scope of Delivery  Crossflow filtration system | Sartorius | Sartoflow Compact 12 HF/A | 2006 | Modular system with hollow fiber membranes Filtration modules | Sartorius | 2006 | Ma ...

This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II INFO was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II INFO vertical machining centre we have for sale. Contact us for further details.

General SKUR0890 MakeLe Carbone AG (F) TypePolybloc NF610G LocationBarneveld Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16.3 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface16.3 m2 Max. temperature165 degr. C Shell capacity80 ltr. Shell diameter660mm Shell length1380mm Max. temperature165 degr. C Shell connectionsDN150 (2x) Cover connectionsDN200 (2x) Capacity94,2 ltr. MaterialGraphite Graphilor XBS Information No.130261 Year of construction1990 Floorspace0,9x0,9 M Total height1,8 M Weight1300 KgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConf ...

Year of manufacture: 2004 - major overhaul by manufacturer CHIRON in 2013 | The machine underwent a complete factory overhaul by CHIRON in 2013. | Operating hours: approx. 80,374 h | Spindle replacement: March 2021 - spindle hours: approx. 8,000 h | Last maintenance performed: January 2024 | Technical Specifications: | Control: Siemens 840D (PCU50, NCU572.4) | NC swivel head | High-speed package: Motor spindle up to 12,000 rpm, 140 Nm | Travels: X 6,000 mm / Y 630 mm / Z 550 mm | Rapid traverse in X / Y / Z: 60 m/min | Chip-to-chip time: 3.0 sec (3.3 sec DIN) vertical / 4.7 sec (5.0 sec DIN) horizontal | Production package: | Scraper belt conveyor, discharge height 1,050 mm | Preparation for internal coolant supply (IKZ) | Vacuum rotary filter KNOLL VRF250 (for steel, cast iron, aluminum, plastic, brass) | High pressure 70 bar with HP pump and variable valve | Automatic loading doors | C ...

used 5-axis CNC machining centre, the CHIRON FZ 08 S, manufactured in 1998, is for sale. | Technical specifications: | Machine type: 5-axis CNC machining centre / vertical machining centre | CNC control: FANUC 21i-M, depending on model | Travel ranges: | X-axis: approx. 300-350 mm | Y-axis: 250 mm | Z-axis: 250 mm | A-axis: 360° for corresponding 5-axis/rotary axis models. | B-axis / swivel axis: -20° / +110°. | Table size / clamping surface: 550 x 300 mm, | Max. workpiece weight: approx. 50 kg in some market specifications. | Tool magazine: 12 tools | Spindle mount: HSK-A 40 | Spindle speed: up to 10,000 (15,000) rpm | Spindle motor power: 3.7 kW | Machine weight: 1,820 kg | Dimensions: 2,050 x 2,250 x 1,900 mm | The machine can be viewed by appointment. | We reserve the right to make changes and corrections to the technical data and specifications, and to sell the item in the meanti ...

Year of manufacture: 2012 | Spindle hours: 20,000 | Turning diameter (max.): approx. 390 mm | Turning length (max.): 1,250 mm | Bar capacity: 76 mm (standard) | X-axis: 300 mm | Z-axis: 1,250 mm | Y-axis: +/- 60 mm (on upper turret) | Spindle specifications: | Speed: up to 5,000 rpm | Drive power: 34 kW (40% duty cycle) | Torque: up to 380 Nm | 4-axis kinematics | 2 x 12 stations (all stations suitable for powered tools) | Speed up to 6,000 rpm, power 11.3 kW | Gear cutting software, including specialised tool holders for gear hobbing/cutting. | IRCO MUK short loader | Hinged belt chip conveyor | 20 bar high-pressure system with paper belt filter | We reserve the right to make changes and correct errors in the technical data, and to sell items prior to order!

Machine dimensions (LxWxH): 2540x1450x1850 [mm] | Machine weight : 1750 [kg] | Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] | Machine weight : 850 [kg] | The machine can be inspected by appointment. | Subject to changes and errors in the technical data and information as well as prior sale!

General SKU268N293 LocationBarneveld MakeManesty machines ltd TypeAccelacota 10 No.280188 Main Features MaterialStainless steel Motor2 KW Inlet diameter600 mm Specified Features - Coating pan Coating pancheck Coating installationTablet coater Batch size15 Kg Pan diameter610mm Pan depth± 450mm Cylindrical width± 220mm (screen) Motor0,5 KW With variable speed drivecheck Pan speed6 - 30 rpm With electric heatingcheck (external) With fancheck Capacity500 m3/h Motor0,25 kW (400 V) With spraying armcheck MaterialStainless steel 1.4552 Information Year of constructionca. 1986-1988 With switchgearcheck(as is) Floorspace1,7x1,2 m Total height1,9 m Weight500 kg Extra Specifications- air heater includedCoating pansManestyCoating pans > Coating pansBrand > Manesty What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to n ...

General SKU418U1312 MakeGlatt LocationBarneveld CEcheck TypeLab-coater GC-300 Main Features MaterialStainless steel Motor4 KW Inlet diameter200 mm Specified Features - Coating pan MaterialStainless steel 1.4301 (304) Coating installationcheck Capacity2,5 Ltr . Batch size0,5-2 kg Pan diameter300 mm Pan depth300 mm Cylindrical width210 mm Conical width90 mm In-/OutletDia. 200 mm Motor0,10 kW, 200 Volt, 3000 rpm With frequency controllercheck Pan speed10-30 rpm With electric heatingcheck (capacity: 5 kW, max. temp.: 70°C) With fancheck (2x blowers) Capacity10-250 m³/h Motor0,36 kW 400 Volt, 2800 rpm & 4,0 kW, 400 Volt, 4670 rpm With air filtercheck With spraying armcheck Information No.100703 Year of construction2002 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,2x1,0 m Total height1.5 m Weight420 kgCoating pansOther ph ...

General SKU254S474 LocationBarneveld Main Features MaterialStainless steel Motor2.3 KW Surface0.075 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface± 80 cm2 Bed sizes3 x 25 cm Product inletcheck Product outletcheck Air inletcheck Air outletcheck Without motorcheck Filter surface75 cm2 Heating unit (electric)check MaterialStainless steel 1.4552 Information MakeExperimental fluid bed dryer Mounted on stainl. steel framecheckFluid bed dryers continuousDyes & pigmentsBrillDryers > Fluid bed dryers continuousIndustries > Chemical > Dyes & pigmentsBrand > Brill What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ma ...

General SKUR1114 MakeManesty (UK) LocationBarneveld TypeAccela-Cota 10 Main Features MaterialStainless steel Inlet diameter600 mm Specified Features - Coating pan MaterialStainless steel 1.4552 Coating pancheck Pan diameter610 mm Pan depth400 mm In-/Outletdia. 280 mm Motorcheck With fancheck Motor0.18 kW 220/380 Volt With spraying armcheck Information No.7 Q 178 Year of constructionunknown With switchcheck Floorspace1,8 x 1,3 m Total height2,1 m Weight930 kgCoating pansManestyCoating pans > Coating pansBrand > Manesty What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Used CFT Oil Filling Monoblock – Comaco 6000 bph – Overview This second-hand CFT–COMACO RVAR 6/10 + TA/3 is a volumetric piston filling and press-on capping monoblock engineered for edible oil. Built in 2008 and currently in production, it is a proven asset for industrial packaging environments looking to expand or upgrade a used bottling line. We can sell it as-is (see and like) or with revamping and preventive maintenance operations to prepare the monoblock for production. Revamping & Preventive Maintenance Activities If required, the following revamping activities can be carried out to ensure reliability and readiness for production: Assembly of machine parts at KBB workshop General machine cleaning General lubrication (greasing, oil level check and possible replacement) Inspection of rubber parts (belts and gaskets) with replacement if necessary Machine start-up: check ...

Overview This Solo Screw Capper was manufactured in 1994 by French company Zalkin. The machine was used to apply plastic caps on 75cl cider glass bottles with a capacity of up to 9,000 bottles per hour. It is immediately available as the production at the previous facility was stopped in 2022. The cap hopper pneumatic system is included. Technical data  Capacity: up to 9,000 bph Formats: 75cl cider glass bottles Dimensions: L.220 cm x W.150 cm x H.320 cm Scope of Delivery  Zalkin CA6 Solo Screw Capper Cap hopper with pneumatic system

x-travel:800 mm y-travel:410 mm z-travel:510 mm control:Fanuc 10 MA rapid travel x/y/z:20/20/15 mm/min table surface area:1100 x 450 mm tool taper:BT 40 tool magazin::30 BT 40 max. tool length:250 mm max. tool weight:8 kg power requirement:7,5/5,5 kW turning speed range:6000 1/min weight of the machine ca.:6,3 t Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup"

x-travel:14000 mm y-travel:3100 mm z-travel:1.200 mm (220 - 1.420) mm distance between columns:4.417 mm table-size:14.000 x 2.500 mm workpiece weight:15.000 kg/m drive capacity - spindle motor:25 kW spindle cone:63 HSK spindle turning speed range:18000 rpm milling feeds:30000 mm/min dimensions of the machine ca.:15.000 x 8.418 x 6.033 mm weight of the machine ca.:135 t CNC controller: SIEMENS 840 D universal milling head:5 Achsen mit ?C5C? Elektrospindel automatic tool changer:24 fach

1 Markert Cleantec continuous surface cleaning machine, year of manufacture: 2003 Continuous length approx. 7,000 mm with division into washing zones, rinsing zone, and blow-off system with associated transport system with 2 x 90° curved elements with chain drive with electric control for transporting wire mesh baskets, primarily 400 x 600 mm with associated control cabinet for controlling the timed material flow Machine no.: 932

length:12192 mm width:2438 mm height:2896 mm weight:4580 kg Total weight:34000 kg charge:29420 kg Cooling Container Internal dimensions: Length 11585mm Width 2290mm Height 2545mm Pallet spaces 23

x-travel:6500/13150 mm y-travel:4000 mm z-travel:1250 mm w-axis:2250 mm table surface area:5500/12150 x 3000 mm max. workpiece weight:70.000/105.000 kg ram head dimension:480 x 510 mm milling spindle motor:63 kW max. torque on the spindle:3300 Nm tool taper:DIN 39871 AD ISO 50 milling head speed:6,3 - 4000 U/min feed speeds:1 - 24000 mm/min w-axis:1 - 6000 mm/min distance between columns:3500 mm passage:3000 mm total power requirement:120 kW weight of the machine ca.:245 t dimensions of the machine ca.:29,0 x 7,7 x 8,1 m Machine is in nearly new condition and was completely modernized in 2020! With CNC SIEMENS 840 D Automatic tool magazine for 153 tool positions Automatic milling head magazine for 6 milling heads Machining module ? straight ? straight long ? Machining module ? angle standard ? 4000 rpm, 144 x 2.5°, ISO 50 Machining module ? narrow angle extended ? 40 kW, 4000 rpm, 1800  ...

turning diameter:220 mm turning length:- mm control:- distance between milling spindels:800 mm spindle speed max.:12.000 U/min daylight:66 mm machine weight ab.:11 t total power requirement:90 kVA Fanuc control Two turrets Two spindles Spindle bore 66 mm on both spindles Two Y-axes Parts gripper Hainbuch chuck on both spindles Tailstock function Chip conveyor Tool eye Short bar loader Tool holder package

turning diameter:570 mm turning length:635 mm travel -x axis:220 mm travel -z axis:635 mm Torque:240 Nm feed::X: 20m/min; T: 24m/min disc turret:12 fach main spindle speeds::25-25.000 dimensions of the machine ca.:3210 x 1750 x 1750 mm weight of the machine ca.:5.300 t

distance spindle /table:min /max 190 / 570 mm distance spindle /table:190 - 570 mm surface area:650 x 300 mm Boring power:in GG 20 40 mm bore capacity in steel:ST 60 32 mm turning speed range::50 - 5000 UpM total power requirement:2,2 kW threading:GG 20 M30 threading::ST 60 M 24 weight of the machine ca.:1400 kg table load:max. 150 kg table height:770 mm traversing speed:max X-, Y- u. W-Achse 5 m/min max. traversing speed:Z-Achse 3 m/min w-axis:380 mm workpiece height max.:495 mm tool changing time:ca. 3 sec x-travel:450 mm y-travel:300 mm z-travel:180 mm workpiece weight:1,5 kg

control: Numeriksteuerung CNC 700 K total power requirement:28 KVA weight of the machine ca.:7,8 t dimensions of the machine ca.:6610 x 2280 x 2235 mm work height max.:1060 mm greates pass round over bed:305 mm spindle bore:82 mm Documents:vorhanden

x-travel:550 mm y-travel:300 mm z-travel:425 mm CNC-control:Sinumerik table-size:950 x 350 mm max. table load:500 kg spindle taper ISO:30 spindle turning speed range:20 - 10500 U/min spindle drive motor:5,5 kW tool change unit:12 Pos. coolant:inkl. voltage:380 V tool adaptor:Steilkegel 40 groove width:32/28 mm no. of flutes:3 rapid speed:40.000 mm/min total power requirement:15 kVA weight of the machine ca.:3,3 t chip conveyor:inkl. dimensions of the machine ca.:2000x 3000 x2500 mm Documents:vorhanden - Serial Number: 186 - 78 - Control: FANUC O-M - with various tool holders - coolant equipment

turning diameter:325 mm turning length:600 mm total power requirement:35 kW spindle drive:25 kW spindle turning speed range:5000 U/min speeds of tool:4500 U/min rapid traverse X-axis:60 m/min diverse toolholders:VDI 40 rapid traverse Z-axis:45 m/min weight of the machine ca.:6,5 t dimensions of the machine ca.:3,5 x 2,5 x 2,1 m Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor - collet clamping - part catcher

faceplate diameter:1600 mm swing diameter:1800 mm turning height:1500 mm max. ram stroke:1200 mm faceplate turning speed range -stepless-:2,5 - 250 U/min workpiece weight max.:10.000 kg ram head dimension:240 x 240 mm feed range:1 - 3000 mm/min power capacity:45 kW weight of the machine ca.:20 t modernized and overhauled in 2010 with CNC SIEMENS 840 D 12 positions automatic toolchanger telescopic covers splash guarding chip conveyor coolant attachment diverse toolholders

x-travel:6500/13150 mm y-travel:4000 mm z-travel:1250 mm w-axis:2250 mm table surface area:5500/12150 x 3000 mm max. workpiece weight:70.000/105.000 kg ram head dimension:480 x 510 mm milling spindle motor:63 kW max. torque on the spindle:3300 Nm tool taper:DIN 39871 AD ISO 50 milling head speed:6,3 - 4000 U/min feed speeds:1 - 24000 mm/min w-axis:1 - 6000 mm/min. distance between columns:3500 mm passage:3000 mm total power requirement:120 kW weight of the machine ca.:245 t dimensions of the machine ca.:29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D autom. tool magazine for 153 tool stations autom. milling head magazine for 6 heads milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm,  ...

Pressure:250 t throat:450 mm stroke:8 - 135 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:635 mm table surface area:1250 x 850 mm hole in the table:355 mm table height over floor:950 mm passage to the back:660 mm ram surface:790 x 610 mm ram adjustment:120 mm power requirement:18,5 kW weight:14,0 t Dimensions (WxDxH):1,5 x 2,8 x 3,65 m German Safety: permitted for manual loading:CE-Norm - EN 692, BGR 500 clutch:pneumatisch overload protection in ram:mechanisch ram counterbalance:pneumatisch

pressure:300 t distance between columns:1220 mm stroke:1000 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1200 x 1000 mm pressure of drawing cushion in table:115 t stroke of drawing cushion in table:400 mm die cushion area:1100 x 860 mm table height over floor:900 mm side window:550 x 1000 mm ram surface:1200 x 1030 mm speed down:400 mm/s speed up:350 mm/s working speed:12 - 31 mm/s oil volume:1080 l power requirement:36,0 + 19,0 kW weight:22,0 t dimensions (WxDxH):2,5 x 2,5 x 6,3 m height over floor:5,4 m height beneath floor:0,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick hydraulic safety block and pump:Fabrikat Rexroth

pressure:620 t distance between columns:2250 mm stroke:1250 mm Distance table/ram, max. stroke up, adjustment up:1600 mm table surface area:2200 x 1280 mm ram surface:2200 x 1500 mm table height over floor:800 / 1000 mm column travel -side:750 mm feed down:10 - 250 mm/sec feed up:10 - 500 mm/sec working feed:1 - 24 mm/sec oil volume:2000 l power capacity:45,0 + kW weight:42,0 t Dimensions (WxDxH):3,7 x 2,6 x 6,8 m German Safety: permitted for manual loading:CE-sign foundation pit:not necessary

<br>Conditions for Agfa Avantra 44 - See image<br><br><br>Verf Gbar: now