heraeus de used for sale

weight max.: 10 t workpiece diameter: 100 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 2 x 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t workpiece diameter: 250 - 2500 mm drum diameter: 250 x 100 mm feed: 100 - 1000 mm/min total power requirement: 0,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

– after technical inspection – very good condition – the ability to lay several stacks in one cycle TECHNICAL PARAMETERS: length of elements 3000 mm width of elements 1300 mm height of elements 1600 mm centering the element number of suction cups 20 pieces vacuum pump 1.1 kW lifting capacity 450 kg hydraulic material lifting pump motor 1.5 kW arm motor 1.8 kW number of cycles 12/min number of receiving rollers 48 height of rollers from the ground 280 mm adjustable suction cup spacing maximum spacing of suction cups 3000 x 700 mm Roll table from stapling: – width of rollers 1000 mm, – length 3750 mm, – slanted rollers, – number of rolls 31, – engine power 1 kW, – adjustable speed. Cross table from stacking: – length 320 cm, – width of rolls 110 cm, – total length of transverse belts 197 cm, – electrically adjusta ...

weight max.: 10 t workpiece diameter: 320 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 150 t workpiece diameter: 1000 - 6300 mm drum diameter: 500 x 300 mm feed: 100 - 1000 mm/min total power requirement: 8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 t workpiece diameter: 320 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t workpiece diameter: 100-2500 mm gear diameter: 250 mm gear width: 140 mm total power requirement: 0,8 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,0 x 1,4 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1200 kg. table turning speeds: 80 - 1600 mm/min. roll diameter: 200 x 50 mm workpiece diameter: 20 - 800 mm range L-W-H: 520 x 470 x 390 mm Antrieb range L-W-H: dito mm Mitläufer volt: 230 V / 50 Hz weight: 56 kg Description: - Device for rotating and positioning Containers and cylindrical workpieces. - Unit in solid steel construction with polyurethane-coated metal rollers. - Precise speed adjustment by Frequency converter. - Foot switch for start / stop, 4-step operation. - Switch for right / left rotation. - Rotary knob for infinitely adjustable rotation speed. - Selector switch for rapid traverse / normal operation. - Switch with indicator light for operational readiness. - HF protected Scope of delivery: - 1 drive unit with control (integrated) - 1 follower The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The DH exxactly. QS is used where a tape measure is too inaccurate and a caliper is too short. Ideal for measuring wooden panels, Aluminium, steel, plastic and glass as well as pipes, profiles and rods. • Version as a tabletop unit or on a mobile base • For dimensional control in the machine room, in incoming goods or quality assurance • Smooth-running guidance for precise and fast measurement • Safe measurement of long workpieces by one person • Measuring range of choice up to 7,000mm (longer version possible on request) • Easy-to-read large digital display "Lowest-Power-LCD" • Power supply depending on the display unit battery or mains connection 100-240 VAC; 50/60 Hz • Dimension display on 1/10 mm

The DH exxactly. TRP is used where a tape measure is too inaccurate and a caliper is too short. Ideal for measuring wooden panels, Aluminium, steel, plastic and glass as well as pipes, profiles and rods. Version as a tabletop unit or on a mobile base For dimensional control in the machine room, in incoming goods or quality assurance For daily inspection of your own machine lines Smooth-running guidance for precise and fast measurement Safe measurement of long workpieces by one person Measuring range of choice 1,000 to 7,000mm (longer version possible on request) Easy-to-read large digital display "Lowest-Power-LCD" Power supply depending on the display unit battery or Mains connection 100-240 VAC; 50/60 Hz Dimension display at 1/10 mm Accessories: With interchangeable centering tips suitable for measuring hole distances Interface with data connection to a PC for logging  ...

weight max.: 10 t workpiece diameter: 100 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 2 x 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 100 t workpiece diameter: 1000 - 6300 mm drum diameter: 500 x 240 mm feed: 100 - 1000 mm/min total power requirement: 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t workpiece diameter: 250 - 2500 mm drum diameter: 250 x 100 mm feed: 100 - 1000 mm/min total power requirement: 0,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 t workpiece diameter: 500 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 1,5 kW weight of the machine ca.: ca. 1,8 t Dimensions (LxWxH): 2,2 x 2,7 x 0,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 80 t workpiece diameter: 850 - 5500 mm drum diameter: 450 x 240 mm feed: 100 - 1000 mm/min total power requirement: 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 t workpiece diameter: 750 - 5000 mm drum diameter: 450 x 180 mm feed: 100 - 1000 mm/min total power requirement: 5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1000 kg workpiece diameter: 20-800 mm connected load frequency: 230 V speed: 100 - 1000 mm/min total power requirement: 0,1 kW weight of the machine ca.: 65 kg dimensions of the machine ca.: 520x470x390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 t workpiece diameter: 500 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 600 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 3000 kg workpiece diameter: 20 - 1500 mm drum diameter: 100 x 200 mm connected load frequency: 230 V total power requirement: 0,12 kW dimensions: 0,8 x 0,37 x 0,36 m speed: 100 - 1000 mm/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Condition: Very good condition

Maximum force: 2000 tons Slider stroke length: 500 mm Number of courses of a slider per minute: 6 Number of single turn-on: 3.6 The closed height: 1160 mm Adjustment: 220 mm Table size: -From left to right: 2000 mm -From front to rear: 2500 mm -Thickness die plate: 300 mm Slider overall dimensions: 1600x2000 mm Aperture in a table: 1250x1250 mm window dimensions in cheeks: 1600x1000 mm Maximum Die Weight: 6000kg Hydropneumatic cushion in the table: ·working stroke 250mm ·maximum clamping force 350 ton-force ·maximum push force 20 ton-force Main electric motor power: 125 kW Press overall dimensions: 5390x4870x8860mm Press weight: 228.990 tons

power capacity: 0 kW tool adaptor: 0 total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping capacity: max. 500 bar diameter of piston: 100 mm range L-W-H: 190 x 150 x 200 mm weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping capacity: max. 500 bar diameter of piston: 40 mm : M16 range L-W-H: 140 x 65 x 85 mm weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 18 mm bore depth: 320 mm swing diameter: mm total power requirement: 33 kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 0 mm workpiece length: 1000 mm work piece width: 875 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC deburring/brushing cell, tool magazine, SIEMENS 510, 5 axes CNC Controlled Flexible Brushing and Deburring Cell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 50 mm bore depth: 2000 mm swing diameter: mm drilling capacity diameter max.: 110 mm total power requirement: 30 kW weight of the machine ca.: 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features Machine consists of the following elements:  ...

Metal detector Boekels Discovery C 50x35 -Year of construction 2003 -Passage height approx. 31cm

Drilling capacity: 0 mm Drilling depth: 0 mm Spindle taper: 0   Number of heads: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0i-MC Technical data Number of drill spindles: 1 Max. drill depth: 1200 mm Drill capacity in steel: from diameter: 3 mm up to diameter: 32 mm Table length: 1200 mm Table width: 1000 mm Max. loading: 5000 kg Travels: X axis: 1000 mm Y axis: 800 mm Z axis: 1200 mm W axis: 400 mm Spindle speeds: stepless from: 60 rpm up to: 6000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 11 kW Power: 34 kW Machine´s weight about: 12000 kg Overall dimensions machine: Length: 7000 mm Width: 4500 mm Height: 3200 mm

Drilling capacity: 0 mm Drilling depth: 0 mm Spindle taper: 0   Number of heads: 0   CNC Brand: 0 CNC Model: 0 Control: IXION Technical data Number of drill spindles: 1 from diameter: 3 mm up to diameter: 25 mm Table length: 1375 mm Table width: 700 mm Max. loading: 2000 kg Travels: X axis: 1000 mm Y axis: 800 mm Z axis: 1000 mm Spindle speeds: stepless from: 100 rpm up to: 4000 rpm Spindle nose SK: 40 Power: 7.5 kW Machine´s weight about: 8000 kg Overall dimensions machine: Length: 6600 mm Width: 4000 mm Height: 2300 mm Various accessories: Coolant system Chip conveyor

Drilling capacity: 0 mm Drilling depth: 0 mm Spindle taper: 0   Number of heads: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of drill spindles: 2 Drill capacity in steel: from diameter: 15 mm Centre height: 200 mm Table length: 700 mm Table width: 380 mm Longitudinal travel (X-axis): 400 mm Spindle speeds: number (steps): 9 from: 1500 rpm up to: 12600 rpm Voltage 50 Hz 3x: 380 Volt Power: 3.2 kW Overall dimensions machine: Length: 3000 mm Width: 1600 mm Height: 1800 mm Various accessories: Loader

Suction nozzle diameter: 160mm; Nominal flow rate: 1300 m³/h; Bucket bag volume: 2 x 175 l; Filter cleaning: manual; Motor power: 2.2 kW; Dimensions: 1817 x 578 x 2115 mm (L x W x H); Weight: 74 kg; Universally applicable also for plastic, metal, glass, polystyrene, paper and the like Particularly robust construction housing made of galvanized sheet steel chip barrels are powder-coated paddle wheel fan for increased suction power Significantly reduced dust content due to double-woven fine filter bag extractors correspond to dust class L Basic units are pre-assembled in modular design Only short installation times for large systems Top price-performance ratio Short installation times due to modular design SCOPE OF DELIVERY System body with mounted fan unit 1 - 6 chip bags ASA 11 - ASA 21 Extraction unit with plastic impeller ASA 31 - ASA 61 Extraction unit with metal impeller sta ...

Capacity (l): 0 l Type: 0   Other Info: 0 Technical data Execution: barrel-burnishing Behältergrösse: Length: 1000 mm Width: 455 mm Number of speeds: up to: 1400 rpm Appropriated for: deburing Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 0.25 kW Overall dimensions machine: Length: 1400 mm Width: 800 mm Height: 1650 mm

TECHNICAL SPECIFICATIONS Manufacturer: GFA Name: Banana sieve Type: 1P 4000/1800 Design: Dry screening, stationary Year of construction: 1994 Throughput: approx. 80 t/h Sieve dimensions (length/width): 4,000 x 1,800 mm Separation deck 1 at: 2 mm (Isenmann) Weight: approx. 7,000 kg Drive power: 7.5 kW TECHNICAL SPECIFICATIONS Manufacturer: GFA Description: Banana screen Type: 1P 4000/1800 Version: Dry screening, stationary Year of construction: 1994 Throughput: approx. 80 t/h Screening dimensions: 4,000 x 1,800 mm Separation deck 1 at: 2mm (Isenmann layer) Weight: approx. 7,000 kg Drive power: 7.5 kW

Vertical tank made of 316 stainless steel by TM IBÉRICA with a total capacity of 800 liters. Top bottom klopper with off-center flange with agitation, man's mouth and flange connections. Body with visual level. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker TM IBERIAN Model TK-409 Guy DISPENSER Material Stainless steel 316 Year of manufacture 1996 Working pressure on the body: 2 bar Specifications: Volume 800 liters total Background type Klopper Type of agitation 4-blade propeller Agitation motor 0.75 kW - 1.385 rpm Envelope 4 legs Lower bottom tubulatures x1 Man's mouth x1 Breaker x1 Outer diameter body 930 rpm Body height 1000 mm Body height + backgrounds (TOTAL: 3300 mm)

Separator tank manufactured by AGUILAR Y SALAS in stainless steel with a capacity of 33 liters. Top bottom type klopper with two flange type tubulatures. Body with two flange-type side tubulatures. Lower bottom type klopper with discharge from the bottom with flange type tubulature. General characteristics: Maker AGUILAR AND ROOMS Material Stainless steel Year of manufacture 2003 Weight 75 kg Design pressure -1/+10 bar Design temperature 200 ºC Test pressure 16.9 bar Capacity 33 L Specifications: Volume 33 L Background type Klopper Upper bottom tubulatures x2 Lateral tubulatures x2 Lower bottom tubulatures x1

Feed tank made of stainless steel with a total capacity of 120 liters. Flat top bottom with flange for feeding and venting. Body with ENDRESS + HAUSER max/min level sensors Conical bottom with discharge from the bottom. About 2 posters Specifications: Volume 120 liters total Background type Conical Envelope 2 posters Outer diameter body 500 mm Body height 600 mm

Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm

Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm

Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm

Vertical tank made of stainless steel by TM IBÉRICA with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker TM IBERIAN Model TK-403B Guy DISPENSER Material Stainless steel Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 980 rpm Body height 1100 mm Body height + backgrounds (TOTAL: 3000 mm)

Vertical tank made of stainless steel by TM IBÉRICA with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker TM IBERIAN Model TK-403B Guy DISPENSER Material Stainless steel Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 980 rpm Body height 1100 mm Body height + backgrounds (TOTAL: 3000 mm)

Vertical tank made of stainless steel by OLIVER Y BATLLE with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker OLIVER AND BATLLE Guy DISPENSER Material Stainless steel 316 Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 950 rpm Body thickness 3 mm Body height 1100 mm Body height + backgrounds 1375 mm (TOTAL: 3000 mm) Lower bottom thickness 3 mm Lower exit height 1050 mm

Vertical tank made of stainless steel by OLIVER Y BATLLE with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker OLIVER AND BATLLE Guy DISPENSER Material Stainless steel 316 Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 950 rpm Body thickness 3 mm Body height 1100 mm Body height + backgrounds 1375 mm (TOTAL: 3000 mm) Lower bottom thickness 3 mm Lower exit height 1050 mm

Vertical tank made of stainless steel by BACHILLER with a total capacity of 380 liters. Top klopper bottom with central flange for agitation, man's mouth and two flange connections. Bottom klopper with discharge from the bottom. On 3 legs General characteristics: Maker BACHELOR Material Stainless steel Year of manufacture 2005 Weight 225 kg BODY Atm design pressure Design temperature 50 ºC Watertight test pressure Volume 380 l Specifications: Volume 380 liters total Background type Klopper Type of agitation Propeller Agitation motor 0.75 kW Envelope 3 legs Upper bottom tubulatures x2 Lower bottom tubulatures x1 Man's mouth x1 Outer diameter body 710 mm Body thickness 4 mm Body height 800 mm Body height + backgrounds (TOTAL: 2300 mm) Top bottom thickness 4 mm Lower bottom thickness 4 mm Engine features: Tension 230/400 V Stream ...

Calderin tank with a capacity of 500 liters manufactured by IBAIONDO. General characteristics: Maker IBAIONDO Year of manufacture 2014 Design and working conditions: Air or water Volume: 500 liters Temperatures: -10/+100 ºC Maximum pressure: 10 bar Test pressure: 15 bar

Vertical tank made of stainless steel with a total volume of 100 liters (80 useful liters) Top bottom klopper screwed to the body with peephole, 3 male thread connections and one female thread connection. Bottom klopper with discharge from the bottom On structure with wheels and rails for hitch with bull or pallet truck. General characteristics: Guy Vertical tank Material Stainless steel Specifications: Volume 100 liters total (80 useful liters) Background type Klopper Envelope Structure with wheels Upper bottom tubulatures x4 Lower bottom tubulatures x1 Peepholes x1 Outer diameter body 400 mm Body height 700 mm Body height + backgrounds TOTAL: 1600 MM

Tank made of stainless steel with a total capacity of 180 liters (150 useful liters) Folding lid with cancamos for lid closure. With discharge through the background. On 3 legs General characteristics: Material Stainless steel Specifications: Volume 150 liters (180 liters total) Background type Klopper Envelope 3 legs Outer diameter body 545 mm Body height 680 mm (TOTAL: 1050 mm)

Square jacketed stainless steel tank with a total capacity of 25 liters for water bath. Top bottom with manually removable lid. Jacketed body and bottom (approximate capacity: 20 liters) Mounted on stainless steel structure with wheels. General characteristics: Material Stainless steel Specifications: Volume 20 liters (25 liters total) Shirt 20 liters approx Envelope Structure with wheels Outer diameter body 280x260 mm Body height 340 mm