heraeus de used for sale

Debarking machine Bar Gar Bg 90 min 140/ max 900mm motor 22 kw with cententic table block pull with ejection

Entrideting machine Bar Gar BG90 min 140/ max 900mm moror 22kw with cententic table block pull with ejection after renovation with warranty

Load capacity - 1000 kg Outer diameter - max. 1200 mm Spreading range 550 - 750 mm Bandwidth max. 350 mm Spreading process - manual Reel drive - three-phase motor 400 V / 50 Hz Unwindspeed max. 30 m / min

Entrideting machine Bar Gar Bg9a min130mm/ max 900mm motor 30 kw Rotor on ball or raderlager, rotor with 5 or 6 Formwork knives, switchboard mi control panel

approx. 15 pieces Transnorm conveyor curve 45 degrees - used - : Price per piece: 950.-€ (net), dismantled and loaded! Manufacturer: Transnorm Year of construction: 2010 Type: 1600-105 Nominal angle: 45 degrees Nominal briete / belt width: 800mm Belt type: KT 96 Nominal radius: 900mm SEW Engine Condition: good Available: now Location: Camp Frankenberg

10 chisels to hydraulic dismantling hammer Sandvik Rammer size G100 and G120. 3 chisels are new 7 chisels are freshly forged.

In line panel rotator Max. panel sizes: 5200 x 1350 mm Max. panel thickness: 60 mm Working height: ca. 900 mm 6 cycles/min

In line 90? panel turning device (or transport crosswise without turning) Panels entering lengthwise, turning them to crosswise Fence side at the left Panel sizes: -Width from 220 mm to 1000 mm -Length from 320 mm to 3200 mm The panels are transported on a roller conveyor, they are taken by 2 clamping discs iin order to turn them freely without friction and are placed back on a roller conveyor bringing them to the next machine Consisting of: -First roller conveyor with inclined driven rollers, length 3000 mm and width 1500 mm, rollers are soft pvc covered, centers 150 mm, feedspeed adjustable from 20 to 80 m/min, power installed 1,1 kW, additional roller coveyor aside in case of transport without turning -Adjustable fence -Clamping and turning device -Second roller conveyor with inclined driven rollers, length 1500 mm and width 3000 mm, rollers are soft pvc covered, centers 150 mm, feeds ...

In line 90? panel turning device Panels entering crosswise, turning them to lengthwise Fence side at the left Panel sizes: -Width from 220 mm to 1000 mm -Length from 320 mm to 3200 mm The panels are transported on a roller conveyor, they are taken by 2 clamping discs iin order to turn them freely without friction and are placed back on a roller conveyor bringing them to the next machine Consisting of: -First roller conveyor with inclined driven rollers, length 1500 mm and width 3000 mm, rollers are soft pvc covered, centers 150 mm, feedspeed adjustable from 20 to 80 m/min, power installed 1,1 kW -Clamping and turning device -Fixed fence -Second roller conveyor with inclined driven rollers, length 3000 mm and width 1500 mm, rollers are soft pvc covered, centers 150 mm, feedspeed adjustable from 20 to 80 m/min, power installed 1,1 kW

Clean out Unit AGFA Azura C 95 year 2011 Located: Gemany Price: on request

GE Mammography Device Senographe DMR+ with the following device components: Tube Maxiray 70 T.2 0,1/0,3 Table top 18x24 and 24x30 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authorized by the manufacturer!

Planmed mammography device Nuance Excel - digital with the following device components: Tube M113 A Varian 0,1/0,3 1x Detector Flex AEC Radiation protection wall + 2. Device with tube and detector as spare parts dispenser • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authoriz ...

We offer you here a second choice deep jetty of the manufacturer SSI Schäfer for sale. The depth bar is suitable for a column depth of 1,250 mm and a maximum truss width of 55 mm. Technical data for the deep bridge: Profile abbreviation: U: 50 x 50 mm Truss pad: approx. 63 mm Material thickness: approx. 3.00 mm Included in delivery are: 01x deep bridge, SECOND choice Material color: blue Total length: approx. 1,264 mm f. Stand depth: approx. 1,250 mm Clear span: approx. 1,130 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Hydraulic Owner: Mahle Pressure capacity: 110 bar Flow rate: 32 L/min 160 l/min at 2 mWS 160L Tank

The depth bridge is suitable for a column depth of 1,050 mm and a maximum truss width of 40 mm. Included in delivery are: 01x deep bridge, used Material color: orange Total length: approx. 1,058 mm f. Stand depth: approx. 1,050 mm Clear span: approx. 960 mm Technical data for the deep bridge: Shelving system: Nedcon Profile abbreviation: 60 x 40 mm Truss pad: approx. 43 mm Material thickness profile: approx. 1.50 mm Material thickness: approx. 4.00 mm Unit weight: approx. 2.50 kg General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Decanter,DDS type K 181 MC,normal capacity 40-50 m3/t

Decanter,Krüger type LX 375,hybamatic stearing

Decanter,Krüger 500 L,2-phases,15 kW motor

Captightener Desonetter type H410-N,airdriven,with gear 350 rpm

Metal detector,stainless steel,Safeline inside dimension,H 100 x W 100 mm.

Metal detector,stainless steel,Detectronic,with conveyor,H 110 x W 200 x L 2500 mm

Metal detector,stainless steel,Detectronic,W 910 x H 270 mm

Destillation unit,stainless steel,Sievert type 1215,7,5 kW,capacity app. 10 l/h

diameter: 180 mm workpiece length: 0 mm work piece width: 1350 mm total power requirement: 65 kW weight of the machine ca.: 7.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: kW tool adaptor: tool taper: HSK-A 100 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2-axis (simultaneous) fork type milling head Power capacity - milling spindle Milling spindle 35 KW from 5000 rpm Spindle speed max. 12000 rpm Swivel range: A axis + / -95 deg C axis 360 deg Note: Milling head was only a short time in operation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

METAL DETECTOR

spindle diameter: 110 mm weight: ca. 130 kg Used spindle support for a Table Type Borer, for example UNION BFK with 110 mm spindle dia. Good condition ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roche COBAS TaqMan + AmpliPrep Amplification Detector Manufacturer's description, all information without guarantee. Automated real-time amplification and detection analyzer. A high-capacity sample format that enables automated real-time amplification and detection of DNA or RNA for up to four assays simultaneously. In combination with the docking station, this system enables fully automatic sample transfer - from the COBAS® AmpliPrep instrument to the COBAS® TaqMan® Analyzer. Characteristics Works with the COBAS® AmpliPrep instrument and docking station for complete automation of sample preparation, amplification and detection Works undocked with the COBAS® AmpliPrep instrument AmpLILINK software provides a simple and efficient user interface for the custom-built Windows-based® PC that comes with the system Automated and fully docked systems available with COBAS ...

bore depth: 2000 mm table load: 2 t turning speeds: 125-1180 U/min Boring power: 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 1380 mm workpiece height: 70 mm : total power requirement: 45 kW weight of the machine ca.: 5.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 25 mm bore depth: 1000 mm swing diameter: mm total power requirement: 25 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling Centre Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 ______________________________________________________________________ _____________ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed  ...

150 x 250mm aperture.

core drilling diameter max.: 6 mm bore depth: 350 mm swing diameter: mm total power requirement: 15 kW weight of the machine ca.: 3500 kg dimensions of the machine ca.: 5000 x 1200 x 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

M. No.: 85.1097

Clamp length: , mm Clamp width: , mm : , Nm RU-LH Painting Assistance Painting assistance for the simultaneous painting of sash and glazing ledges. A clamp has to be positioned in each corner of the already made frame. The operation is started by using a foot valve. For different thickness of ledges the clamping device is height- and depth adjustable. The positioning is diagonally and the clamps stick out of the wood about 25 mm. Now the frame can be pressed into the sash and is fixed. For the painting the frame is positioned now about 10 mm outside in front of the sash. After drying, the frame is pressed into the sash, it will be removed before the glazing. The clamps can be removed by hand for the further processing. For different thickness of ledges the clamping-device is height- and depth adjustable. The height is adjustable from 700 – 1200 mm. Advantages: Quick assembly No jammin ...

weight max.: 40 t workpiece diameter: 7000 mm roll diameter - bore: 500 mm Wheel width: 180 mm Distance of shafts: 100-3000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 t workpiece diameter: 6000 mm gear diameter: 680 mm gear width: 230 mm Distance of shafts: 900-3500 mm axis height: 550 mm total power requirement: kW weight of the machine ca.: 4,5 (9 ) t dimensions of the machine ca.: m Load capacity per piece 30 t load-carrying along 60 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 50-355 mm bore depth: 4000 mm swing diameter: 1000 mm centre height: 500 mm full boring: 18-100 mm main spindle bore: 163 mm turning speeds: 56-710 U/min workpiece weight: 6,3/10 t Tailstock: 70-600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Drill pipes, guide block, drill head, rolling steady rest, support bearing drill heads, jaws 21- 240 mm, Holder, tools, shelves, cupboards The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 70-550 mm bore depth: 10000 mm table load: 10 t turning speeds: 35-92 + 92-595 U/min transmission ratio: 2 clamping diameter max.: 1000 mm workpiece weight: 10000 kg chip conveyor: coolant: total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dekanter,rustfrit stål,Alfa Laval Foodec 209,komplet med styreskab.

Dekanter,DDS type K 181 MC,normal kapacitet 40-50 m3/t

weight max.: 40 t workpiece diameter: 150 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 150 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t workpiece diameter: 100-2500 mm gear diameter: 250 mm gear width: 140 mm total power requirement: 0,8 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,0 x 1,4 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 t workpiece diameter: 750 - 5000 mm drum diameter: 480 x 180 mm feed: 100 - 1000 mm/min total power requirement: 2 x 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tiede Universal U550 GW Magnetic Electric Crack Detector Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic Electric Crack Detector Rated operating current I 5400 A AC seats or 3800 A AC effective, adjustable in 8 steps Flow Ø: 8000 Aw full wave DC. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetization coil lights Ø 800 Bushing Ø: 5000 Aw with alternating current adjustable in 8 stages, chamois according to DIN 54131 Year of construction 1984 Accessories/special equipment Electronic magnetization controls Degaussing device Support rolls Blackout cabin Main machine dimensions Total length mm 8.000 Total width mm 2,500 Total height mm 2.500 Scope of work Remarks Nominal diameter mm ~5.500 Field of application: Testing of crankshafts. Item condition: used Further technical data can be found on the machine  ...

weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 600 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.