129,270 used machines on RESALE, but how to find them? Machine Search
A CNC machining center Chiron factory-overhauled by the manufacturer in 2017 is available. Travel path X/Y/Z: 450mm/270mm/310mm, NC head swivel: -20°/115°, tool positions: 40, tool holder: HSK-A40, speed: 15000rpm, control: Siemens 840D, operating hours: approx. 22500h. Including rotary table package AWU 160 with D105, collet chuck, handling, bar feeder Irco SiMag 100.1-3000, through-coolant preparation, scraper belt conveyor (1050mm), duplex filter Mahle, vacuum rotary filter Knoll VRF 400, approx. 500 tool holders HSK-A40 and various spare parts. Documentation vorhanden. An inspection on site is possible.
A vertical high-performance milling and thread machining center DMG Mori is available. Travel X/Y/Z: 700mm/420mm/380mm, max. workpiece dimensions X/Y: 880mm/550mm, table dimensions X/Y: 840mm/420mm, max. table load: 400kg, spindle speed: 10000rpm, spindle power: 25kW, torque: 45Nm, tool positions: 15, tool holder: BT30, rapid traverse: 60m/min, feed force: 5kN. Machine dimensions X/Y/Z: approx. 1650mm/2350mm/2500mm, weight: approx. 4000kg, control: Siemens Sinumerik 840D Solutionline, machine hours: 28892h, spindle hours: 12674h. Documentation available. An on-site inspection is possible.
serial number: 1068645 x-travel: 2080 mm y-travel: 812 mm z-travel: 750 mm : ja : ja internal cooling: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: MTcut Model: UE110-5A Type of Machine : 5-Axis CNC Vertical Machining Centre Power Supply: 400V / 100A / 70 KVA Compressed Air: 3/8 inch, 6-8 bar Coolant Tank: 120 litres Central Lubrication: R68 (ISO68) Hydraulic Oil: R32 (ISO32) Machine Weight: 9,000 kg Machine Bed: Cast Iron Travel and Work Envelope: - X Axis: 1,100 mm - Y Axis: 610 mm - Z Axis: 610 mm - B Axis (Swivel Head): -30 / +120 degrees continuous - C Axis (Rotary Table): 0.001 x 360 degrees - Spindle Nose to Table: 105 - 715 mm Spindle: - Speed: 14,000 rpm - Torque: 160 Nm - Power: 29 kW - Cooling: Water cooled - Tool Interface: HSK63 Swivel Milling Head: - Swivel Range: +30 / -120 degrees stepless - Speed: 11 rpm - Positioning Accuracy: 10 arc seconds - Max Holding Torque: 1,320 Nm - Drive: Siemens Torque Motor Rotary Table: - Diameter: 610 mm - Speed: 50 rpm - Positioning Accuracy: 15 arc seco ...
x-travel: 850 mm y-travel: 500 mm z-travel: 500 mm taper: ISO 40 P.D.B. table-size: 400x1250 mm volt: 400 V Control: Heidenhain TNC 355 total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 720 mm y-travel: 360 mm z-travel: 420 mm taper: ISO 40 table-size: 1000x320 mm volt: 400 V total power requirement: 5,5 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Universal milling head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1100 mm y-travel: 500 mm z-travel: 600 mm taper: ISO 40 P.D.B. table-size: 500x1250 mm volt: 400 V Control: Heidenhain TNC 410MA total power requirement: 10 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC controls SIEMENS 840 D SL WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 4 X-axis travel: 210 mm Y-axis travel: 270 mm Z-axis travel: 360 mm SPINDLE / HEAD spindle revolutions (max): 40000 /min tool fixture: HSK A40 TOOL MAGAZINE number of positions: 64 AUTOMATIC WORKLOAD EQUIPMENT workpiece manipulator: articulated robot number of store positions: 32 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 9000 kg ATTACHMENTS chip conveyor: yes coolant unit: yes band filtration unit: yes closed cabin: yes Operating hours: Spindle 1: 4050 h, Spindle 2: 11,114 h Internal cooling 70 bar Fanuc ...
CONTROLS CNC controls SIEMENS 840D SL 4.8 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 4 X-axis travel: 210 mm Y-axis travel: 270 mm Z-axis travel: 360 mm SPINDLE / HEAD spindle revolutions (max): 40000 /min tool fixture: HSK A40 TOOL MAGAZINE number of positions: 72 AUTOMATIC WORKLOAD EQUIPMENT workpiece manipulator: articulated robot number of store positions: 36 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 8500 mm space requirements -front/back-: 2500 mm total weight approx.: 6000 kg ATTACHMENTS central lubrication system: yes chip conveyor: yes coolant unit: yes &n ...
MOBIDELLI CNC Center Specifications General Information Manufacturer: MORBIDELLI, Italy Year of Manufacture: 2005 Model: PLANET HP 4618 Main Technical Parameters Max machining length: 4600 mm Machining length on two fields: 1900 mm Machining length on four fields: 720 mm Max width of elements: 1830 mm Element thickness: min 12 mm, max 60 mm Edge radius: min 10 mm (external), 30 mm (internal) Edge material thickness: 0.4 mm to 3 mm Supported edge materials: PVC, ABS, veneer, foil Work Areas Working Fields: 4 Vacuum consoles per field: 2 Consoles sizes: 145x145x110 mm and 145x60x110 mm (rotatable) Main Spindle Clamping system: HSK F63 - DIN 69893 Max tool weight: 6 kg Tool length: max 200 mm Max spindle speed: 18000 rpm Tool Changer Tool magazine capacity: 12 tools Only supports HSK F63 Edgebanding Unit ...
Manufacturer: Queser Model: MV 154 EL Year of Manufacture: 2012 Type of Machine : Machining Center - Low hours - Very good condition - Many tools Find more here - / Contact us at -
Machining center in vertical design Workpiece dimensions: Length 200 to 3050 mm Width 70 to 850 mm Thickness 12 to 60 mm Max workpiece weight 35 kg 1 milling spindle 10 kW (HSK63) with tool changer with 4 positions 13 independently callable vertical drilling spindles 4 independent horizontal drilling spindles in X 2 horizontal drilling spindles in Y 1 grooving cutter in X Wood WOP operating software Wood WOP import basic DXF import basic Operating language: nl, de, en Woodwop 7 Office license included
Working field: axis x: 2310 mm, axis y: 628 mm, axis z: 90mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill chuck: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles in X, 12vertical spindles in X line Working air pressure: 6 bar Max consumption of compressed air: 0,75 NL/cycle Installed power: max 7.5 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit PLC for control of the machine cycle
X=3700mm Y=1440mm, Z=150mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 8 supports with vacuum cups, pneumatic clamping 8 fences at the rear 8 fences in front 2 left fences and 2 right fences 6 rails for panel loading with pneumatic lifting Positioning the vacuum cups using a laser 1 connection for templates Vacuum pump with flow rate 100 m3/h Configuration V25,H8X/6Y, N1 X-Y 90?, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rear Main motor 15 kW, 1250-24000 rpm, air-cooled, 360? C-axis, C-axis interpolation axis, HSK 63 mounting C axis extension for flex-5 aggregate Main motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mounting Tool changer operating in X direction with 14 positions, rear mounted 2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins 14 horizontal drilling spindles 90? groove saw X-Y direction PC 85 power control software with: Woodwop: workshop-oriented program ...
Window machining center Dimensions of workpieces: Workpiece length: 270 x 3000 mm Workpiece thickness: 30 - 85 mm Workpiece width: 180 mm Equipment: Electric length stop Crosscut saw, diameter 400 mm, motor 3 kW Tenoning spindle, diameter 50 mm, useful shaft length 600 mm, motor 7.5 kW 3 x profile shaft, diameter 50 mm, length 600 mm, motor 7.5 kW Glazing bead saw, diameter 200 mm, effective shaft length 20 mm, motor 2.2 kW Feed device 1.5 kW, roller diameter 120 mm Oertli tools included profile 68, 78, 82
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 4 X-axis travel: 550 mm Y-axis travel: 320 mm Z-axis travel: 360 mm TABLE table surface (left-right): 820 mm workpiece load (max): 500 kg SPINDLE / HEAD spindle revolutions (max): 24000 /min tool fixture: HSK A50 AXIS DRIVES rapid traverse: 75000 mm/min TOOL MAGAZINE number of positions: 24 AUTOMATIC WORKLOAD EQUIPMENT workpiece manipulator: articulated robot store type: table changer number of store positions: 2 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 7700 kg ATTACHMENTS guideway covers: yes &n ...
Item sold in NOT verified status. Auction-ID: A7-44984-1
A defective CHC stone processing center Intermac is available. Travel X/Y: 2300mm/1000mm, material thickness range: 2mm-25mm, speed: 12000rpm, machine dimensions X/Y/Z: approx. 4700mm/2700mm/2700mm, weight: approx. 3500kg. A cost estimate from the manufacturer is available. Documentation available. An inspection on site is possible.
CONTROLS CNC controls ALPHA BASIC DESIGN basic design: bed type WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 .. among of them simultaneous CNC axes: 3 X-axis travel: 4000 mm Y-axis travel: 1500 mm Z-axis travel: 120 mm TABLE table surface (left-right): 4000 mm table surface (front-back): 1500 mm SPINDLE / HEAD spindle revolutions (min): 5 /min spindle revolutions (max): 40000 /min tool fixture: HSK E25 drive power: 3 kW drive power: 3 kW TOOL MAGAZINE number of positions: 10 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 5500 kg Vacuum clamping technique for aluminum plates up t ...
CNC control, processing materials: wood, wood-based materials, plastics, aluminum, etc., cutting area (L x W): 2500 x 1500 mm, maximum free feed rate: 400 mm/s, maximum working feed rate: 300 mm/s, working head stroke: 250 mm, brushless HSD spindle with automatic tool change (ATC), spindle drive power: 8.5 kW, tool holder: HSK F63 ER32, programming resolution: 0.025 mm, positioning resolution: 0.03 mm, AC servomotors, USB port Dimensions approx.:3000x2000x2000mm Weight approx.: 2200kg Auction-ID: A7-40551-23
x-travel: 850 mm y-travel: 700 mm z-travel: 500 mm Control: Siemens 840 D rotary table: 800 mm c-axis: 0.001º ( ±360º) 0 B-axis (table): +25 / -110 º mm number of spindle speeds: 18.000 U/min/rpm tool taper: HSK 63 Tools changer: 38 fach/tools Internal cooling system: 80 bar handwheel: total power requirement: 43 kVA weight of the machine ca.: 10,6 t dimensions of the machine ca.: m Equipment- Paper belt filter – 200 l tank- Active control cabinet cooling- Infrared probe M&H (Heidenhain)- Laser tool measuring system Blum- Chip conveyor- Cleaning pistol with pump 2 bar / 40 l min- 3D Quick Set- Electronic handwheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine is disassembled into dimensions of truck, mega trailer needed for transport. 13 Loading Meter Machine pick-up by appointment, loading not possible on pick-up days Auction-ID: A1-44905-108
CONTROLS CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm rotating range B-axis from: -115 ° rotating range B-axis up to: 30 ° rotating range C-axis from: 0 ° rotating range C-axis up to: 360 ° TABLE clamping surface diameter: 450 mm workpiece load (max): 200 kg SPINDLE / HEAD spindle revolutions (max): 20000 /min AXIS DRIVES rapid traverse X: 22000 mm/min TOOL MAGAZINE number of positions: 220 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 4400 mm space req ...
CONTROLS CNC controls MORI SEIKI MSC 500 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 460 mm TABLE table surface (left-right): 900 mm table surface (front-back): 450 mm workpiece load (max): 300 kg SPINDLE / HEAD spindle revolutions (min): 80 /min spindle revolutions (max): 8000 /min tool fixture: ISO BT 40 TOOL MAGAZINE number of positions: 20 ELECTRICAL SPECIFICATIONS mains power supply: 15.5 kVA DIMENSIONS / WEIGHTS space requirements -left/right-: 2210 mm space requirements -front/back-: 2242 mm total height: 2723 mm total weight approx.: 4200 kg
SALE ONLY OUTSIDE GERMANY. https://youtu.be/EPCrzSsUe2U Including coating and stacking Retrofit 2016 Ready for use Including stacking and unstacking gantry crane Auction-ID: A1-45406-1
Manufacturer: Schuco Model: AS100 Throughput Center Year of Manufacture: 2020 and 2022 Type of Machine :CNC 5-Axis Machining Center Layout Version: MA6 Machine Dimensions - Total Length: 22,300 mm - Total Width: 7,123 mm - Total Height: 3,058 mm - Machining Zone Width: 5,357 mm - Loading/Unloading Magazine Width: 7,500 mm - Magazine Depth: 1,766 mm Connections Required - Power supply (electrical connection) - Compressed air - Network connection - All connections to be provided from above Key Features - Two fully equipped 5-axis machining towers - Five self-driven clamping vices - Combined loading and unloading magazine - Profile buffer capacity: up to 12 profiles lying flat, up to 16 profiles standing - Unmanned operation capability for up to 16 profiles - Six-sided profile machining - Variable gripper system compatible with all profile geometries - Integrated saw station and n ...
Manufacturer: Schuco Model: PBX AL Year of Manufacture: 2003 and 2008 Type of Machine : CNC Machining Centre Control System: Schuco-CAM with Windows operating system A-Axis: Continuous rotation from +90 to -90 degrees via servo axis Machining sides: 3-sided profile machining without reclamping Technical Specifications - Number of CNC Axes: 4 - Machining Length: 7,200 mm - Simultaneous Profile Capacity: up to 6 bars (optionally up to 8 bars) - Clamping Vices: 6 automatic, designed for double-bar machining (optionally 8) - Profile Stops: 2 pneumatic (optionally 3) - Machining Width - Front Bar: 250 mm - Machining Width - Rear Bar: 120 mm - Machining Height: 200 mm - rive Motor Power: 5.5 kW - Spindle Speed Range: up to 18,000 rpm - Motor Power from: 5.5 kW at 7,000 rpm - Tool Holder: SK 30 - Max. Disc Cutter Diameter: 120 mm - Max. End Mill Diameter / Length: 50 mm / 160 mm - Trave ...
travel -x axis: - mm travel -y axis: - mm travel -z axis: - mm control: HEIDENHAIN - iTNC 530 number of spindle speeds: 18.000 U/min tool taper: HSK-A63 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC & pallet changer. The machine is in a well-maintained condition, works in Switzerland. The machine and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
travel -x axis: - mm travel -y axis: - mm travel -z axis: - mm control: HEIDENHAIN - iTNC 530 number of spindle speeds: 18.000 U/min tool taper: HSK-A63 5-axis simultaneous machining center | HERMLE - C 20 U equipped with ITC & pallet changer. The machine is in a well-maintained condition, works in Switzerland. The machine and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 22 | C22 | C-22 | C22U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Performs all functions Auction-ID: A3-43506-9035
Awea BM 1200 vertical machining center X-axis travel: 1,200 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table dimensions: 1,350 x 600 mm Maximum Table Load: 1,200 kg Spindle Mount: BT-40 Total Machine Weight: approx. 8,500 - 9,000 kg Ground Clearance (W x D): 3,200 x 2,400 mm Maximum Height: 2,600 mm Auction-ID: A7-44885-10
vertical machining center YANG EAGLE 600 X-axis travel: 600 mm Y-axis travel: 410 mm Z-axis travel: 450 mm Table dimensions: 700 x 400 mm Maximum Table Load: 300 - 350 kg Spindle Mount: BT-40 / ISO-40 Total machine weight: approx. 3,200 - 3,500 kg Floor Dimensions (W x D): Approx. 2,000 x 2,200 mm Maximum Height: 2,450 mm Auction-ID: A7-44885-12
JUPITER JC-1000 DATA SHEET Control: Fagor CNC8055 MC Strokes (X, Y, Z): 1000 x 500 x 500 mm Table: 1200 x 500 mm Spindle: BT 40 - 8,000 RPM Tool magazine: 24 positions Rapid: 30 m/min Overall dimensions: 2900 x 2200 x 2600 mm Machine weight: 5000 kg Scope of delivery: remote handwheel, chip tank Chip Conveyor Complete with manual CE Certificate Auction-ID: A7-44885-8
Axis Strokes (X/Y/Z): X=810mm Y=610 mm Z=610 mm Table 600 mm Permissible weight approx. 600 kg Spindle: Mount: BT-40 Speed: 10,000 rpm Power:11/15 Kw Tool Changer (ATC): Random type with 24-position exchanger arm Numerical Control (CNC): Selca 4000 Floor space: Approx. 2,200x2,400 mm Height: Approx. 2,355 mm Machine weight: Approx. 6,500 kg Auction-ID: A7-44885-4
First vertical machining center X-axis travel: 1,500 mm reach to 2000 mm Y-axis travel: 700 mm Z-axis travel: 600 - 700 mm Table dimensions: 1,700 x 700 mm Maximum Table Load: 1,200 - 1,500 kg Spindle Mount: BT-40 Total Machine Weight: approx. 9,000 - 10,000 kg Floor Dimensions (W x D): Approx. 4,200 x 3,000mm Maximum height: 2700mm Auction-ID: A7-44885-20
TECHNICAL DATA SHEET WINTEC MV 45 Control: Fanuc Series 18-M X-axis travel: 800 mm Y-axis travel: 450 mm Z-axis travel: 500 mm Table dimensions: 900 x 450 mm Spindle Attachment: BT 40 Spindle speed: 8,000 RPM Tool Change: ATC 20/24 Position Rapid: 24 - 30 m/min Overall dimensions: 2400 x 2200 x 2550 mm Machine weight: 4500 kg Auction-ID: A7-44885-14
Hass VF 1 vertical machining center X-axis travel: 520 mm Y-axis travel: 420 mm Z-axis travel: 520 mm Table dimensions: 660 x 356 mm Maximum Table Load: 1,360 kg (static load, distributed) Spindle Mount: BT-40 Total Machine Weight: approx. 3,500 - 3,800 kg Floor Dimensions (W x D): Approx. 2,300 x 2,400 mm Maximum Height: 2,600 mm Auction-ID: A7-44885-17
Year: 1995 Serial No.: 488-11 Type / Function: 4-axis vertical CNC machining center Configuration: 2 pallets, 2 × 4th axis Peiseler RT 160 Numerical control: SIEMENS Spindle: New spindle replaced in 2021 Included equipment: KNOLL filter unit, chip conveyor Weight: 4000 kg Auction-ID: A1-44765-271
Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible.
Sold with various tools and documentation. Technical Information Main training Maximum speed: 9,000 rpm Motor: AC Servo Motor 100% ED engine power: 4.96 kW Engine power at 40% ED: 6.94 kW Continuously programmable speed: 20 – 9,000 rpm Torque/power diagram Speed range: 20 – 9,000 rpm Axis drive AC servo motors for X, Y, Z axes Programmable feed rate: up to 10,000 mm/min Input Unit: 0.01 mm Fast (fast) speed: 12 m/min Measurement system X, Y, Z axis resolution: 0.001 mm Position Tolerance (Direct Measurement): 0.010 mm Work Area X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Work table Round table with swivel axis Clamping surface: Ø 700 x 500 mm T-slot spacing: 63 mm T-Slot Width: 14 H7 Centering bore: Ø 30 H7 Rotation range: 360° Table lock ...
Manufacturer: HARTFORD Year: 1999 Type: CNC Vertical Machining Center Numerical Control: FANUC O-M Axes: 3 Axes (X, Y, Z) Strokes: X 1000 mm / Y 500 mm / Z 550 mm Spindle: BT40 – 8000 rpm Equipment: Chip Conveyor, Full Documentation (Operator's Manual, Electrical Diagrams, FANUC Documentation) Condition: Machine in working order, loaded on truck (LOADED) Condition: used Auction-ID: A1-44765-229
CNC vertical machining center for machining metal parts. Numerical control: Siemens 810D Strokes: X 630 mm / Y 500 mm / Z 500 mm Table: 800 × 500 mm Maximum table load: 500 kg Spindle cone: ISO 40 Spindle speed: 10,000 rpm Auction-ID: A1-44765-248
maximum number of results exceeded
please refine your search
7.500 € 
