heller machining center used for sale

Mayfran ConSep 2000 Coolant System Chip conveyor with drum filter 70 bar high pressure pump Cooling by the spindle Electronic handwheel NC rotary table with 360,000 positions Synchronized Threading Automatic on/off Preparation for Palletech CE mark Documentation

CHEVALIER QP2040-L CNC Machining Center Technical Specifications Manufacturer: Falcon Machine Tools / Chevalier Type: QP2040-L Machine Type: Vertical CNC Machining Center Table Size: 1,200 × 510 mm Maximum Table Load: 600 kg Spindle Speed: 8,000 RPM Machine Weight: 6,000 kg

Mikron HSM 400 is a high-precision, high-speed machining center  STEP TEC spindle, type HVC140-SB-10-15/42-3F-HSK-E40 Spindle hours: 26897 h Manufacturer: Step-Tec AG (Switzerland) Spindle type: HVC140-SB-10-15/42-3F-HSK-E40 Tool interface: HSK-E40 Maximum spindle speed: 42,000 rpm Power: 13 kW (40% duty cycle), 10 kW (100% duty cycle) Torque: 4.25 Nm (40% duty cycle), 3.2 Nm (100% duty cycle) Lubrication: oil-air lubrication system Axis Drives and Dynamics Drive system: AC servo motors with ball screw drives Feed rate (X/Y/Z): 0 – 40 m/min Acceleration (X/Y/Z): 1 g (10 m/s²) Rotary Axis Performance B-axis speed: up to 54,000 °/min C-axis speed: up to 90,000 °/min Tool System Tool interface: HSK-E40 Tool magazine capacities: 18 / 36 / 68 tools depending on configuration Tool change time: approx. 10 seconds Chip-to-chip time: approx. 12.5 seconds Pallet and Clamping System  ...

This 5-axis KOVOSVIT MAS MCU 630V-5X was manufactured in 2011. It features a HEIDENHAIN iTNC 530 control, a spindle speed of up to 12,000 min⁻¹, and a maximum torque of 157/215 Nm. The machine supports a table load of 850 kg and includes options like cooling through the spindle and a Probe OPM40. Ideal for complex machining tasks, the KOVOSVIT MAS MCU 630V-5X vertical machining centre we have for sale. For more information about this vertical machining centre, please reach out to us.

x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm Control: Heidenhain iTNC 530 spindle speed:: 6000 1/min. spindle taper: CAT-50 ISO spindle drive: (S1) 10 kW table surface area: 1300 x 600 mm table load: 1200 kg feed speeds: 1-10000 mm/min rapid travel x/y/z: 20/20/15 m/min distance table - lower edge spindle: 125-725 mm total power requirement: 25 kVA weight of the machine ca.: 7,5 t dimensions of machine: 3600 x 2300 x 3000 mm Equipped with: CNC control Heidenhain iTNC 530 Electr. portable handwheel Spindle oil cooler Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg Preparation for hydraulic machine vice Preparation for 3-D measuring probes Chip conveyor Coolant system, coolant through spindle 20 bar Machine documentation Working hours (date 29. July 2026): - Control on: 60.822 h - Machine on: 59.602 h ...

Mazak VTC 800/30SR CNC Bearbeitungszentrum (2009) Hersteller: Mazak Typ:VTC 800/30SR CNC Bearbeitungszentrum Baujahr: 2009 Zustand: gebraucht, unter Strom in Produktion Betriebsstunden: 34.000h Spindeldrehzahl 18.000 U/min Werkzeugmagazin 48 Werkzeuge Weitere Informationen folgen.

Röders RFM 600 Hochgeschwindigkeitsfräsmaschine Hersteller: Röders Typ: RFM 600 Baujahr: 2000 Zustand: gebrauch, unter Strom, Steuerung auf Windows 7 NEU x-Weg 600 mm y-Weg 500 mm z-Weg 300 mm Steuerung RÖDERS RMS 6 3.60 Spindelaufnahme HSK E 40 Spindeldrehzahlen 42.000 U/min Werkzeugwechseleinrichtung 18-fach Tischgröße 700×;500 mm Werkstückgewicht 800 kg Antrieb 14 kW Gesamtleistungsbedarf kW Maschinengewicht ca. 5,2 t Raumbedarf ca. 3,2×;2,25×;2,65 m Röders Jobmanager (zum Bearbeiten mehrerer Werkstücke nacheinander) Antastprogramme für nahezu alle gängigen Geometrien Extor Absauganlage für Staubende Zerspanung Minimalschmierung Bettbahngebläse Blum Messlaser (für die Werkzeugvermessung Länge + Durchmesser + Kontur und Bruchkontrolle ) Werkzeugreinigung (Luft) Kühlaggregat für Spindel und Schaltschränke Dokumentation

POSmill E 1100 Bearbeitungszentrum ITNC 530 (2014) Hersteller: POSmill Typ: E 1100 Bearbeitungszentrum ITNC 530 Baujahr: 2014 Zustand: gebraucht, gut unter Strom vorfühbereit Einschaltstunden ca. 43.559h Spindelstunden ca. 15.789h Steuerung ITNC 530 Verfahrwege POsmill E 1100 X-Achse 1100 mm Y-Achse 600 mm Z-Achse 510 mm Eilgang bis 32 m/min Kugelgewindetriebe bis 50 mm Vorschub 1 ? 10.000 mm/min. Werkzeug-Aufnahme ISO 40 Drehzahl, max. 10.000 U/min. Leistung, max. 25 kW Abstand Spindel/Tisch 120-630 mm Abmessung Tisch 1300 x 600 mm Abstand Boden/Tisch ca. 855 mm Belastung, max. 1.000 kg Abstand Spindel/Ständer ca. 600 mm Anzahl Werkzeuge 60 Stk. Werkzeuglänge, max. 300 mm Werkzeug-Gewicht, max. 8 kg Wechselzeit ab 5,5 s Gewicht 8.500 kg ? Original Dokumentation ? 3D Messtaster ? Bandfilteranlage mit IKZ 20 bar ? Wasserpistole ? Luftpistole ? Maschinen ...

Akira Seiki Dugard 1350 XP Bearbeitungszentrum (2017) Hersteller: Akira Seiki Typ: Dugard 1350 XP Baujahr: 2017 Steuerung: Heidenhain iTNC640 Zustand: gut, gebraucht Spindelstunden: 6300h Verfahrweg X-Achse: 1.350 mm Verfahrweg Y-Achse: 640 mm Verfahrweg Z-Achse: 660 mm Eilgang X-Achse: 33 mm/min Eilgang Y-Achse: 33 mm/min Eilgang Z-Achse: 25 mm/min Werkstückgewicht (max.): 2.300 kg Gesamtlänge: 3.800 mm Gesamtbreite: 2.495 mm Tischbreite: 1.500 mm Tischlänge: 600 mm Tischbelastung: 2.300 kg Spindeldrehzahl 20 -12000 U/min Werkzeugmagazin 36 Werkzeugaufnahme SK 40 Kratzspäneförderband Infrarottaster TS 460 Werkzeugvermessung TT160 IKZ 20 bar Dokumentation/Handbuch

Kunzmann WF 650 5-Achs-Bearbeitungszentrum Simultan (2009) Hersteller: Kunzmann Typ: WF 650 5-Achs-Bearbeitungszentrum Simultan Baujahr: 2007 Inbetriebnahme: 2009 Zustand: gebraucht, sehr gut Maschine EIN: 46181 h Spindelstunden: 12959 h Steuerung: Heidenhain iTNC 530 Software-Paket 1 zu iTNC 530 X ? Achse 650 mm Y ? Achse 500 mm Z ? Achse 450 mm Schwenkbarkeit des Vertikalfräskopfes -5° + 95° NC-Einbaurundtisch Ø 630 mm Tischbelastung 350 kg Spindeldrehzahl 12.000 U/min Werkzeugaufnahme SK40 Werkzeugwechsler mit 20 Werkzeugen IKZ: Werkzeugspanner mit Kühlmittelzulauf und Ausblaseinrichtung durch die Spindel Förderleistung 25l/min bei 40 bar Wahlweise Wasser/Luft durch die Spindel Papierbandfilter Gesteuerter CNC-Fräskopf (B-Achse) Anrüstsatz für Tastkopf TS 640 3-D-Taster mit Infrarot-Übertragung Abmessungen LxBxH ca.: 3,1 x 2,4 x 2,45 m Gewicht ca 6. ...

Wagner WMC 1800 CNC Bearbeitungszentrum (2013) Hersteller: Wagner Typ: WMC 1800 Baujahr: 2013 Siemens 828 Steuerung Zustand: gut, gebraucht, unter Produktion X-Weg 1800mm Y-Weg 900mm Z-Weg 700mm Werkzeugaufnahme SK40 IKZ 25 bar mit Bandfilteranlage Werkzeugvermessung Handrad Dokumentation Ohne Werkzeug

Posmill C1050 3 Achs Bearbeitungszentrum (2010) Hersteller: POSmill Typ: C1050 3 Achs Bearbeitungszentrum (2010) Baujar: 2010 Maschinenart: 3 Achs Bearbeitungszentrum. Zustand: unter Strom, sofort einsatzbereit. Betriebsstunden: ca. 29800h Spindelstunden: ca. 9000h Steuerung: iTNC 530. Spindeldrezahl: 10.000U/min Werkzeugmagazin: 30 x-Achse (mm) 1.050 y-Achse (mm) 530 z-Achse (mm) 630. Abstand Spindel/Tisch (mm) 85-715 Zubehör: Dokumentation Späneförderer Kühlmitteleinrichtung Werkzeugwechsler 30 pos. Linearmassstäbe in allen Achsen X / Y / Z 3D-Taster elektr. Handrad . Ab sofort verfügbar.

MTCut V110 4 Achs Bearbeitungszentrum (2012) Hersteller: MTCut Typ: V110 Baujahr: 2012 Zustand: gebraucht, sehr gut, in Produktion. Einschaltstunden: 14150h Spindelstunden: 3710h Steuerung: Itnc 530 Verfahrbereich. X x Y x Z = 1100 x 640 x 610mm ? 30-fach Werkzeugwechsler ISO 40 ? 4. Achse, 200mm Futter mit hydr. Werkstückklemmung und 350mm Planscheibe. ? Innere Kühlmittelzufuhr 50bar ? Spindelkühlung ? Meßtaster ? Abmessungen ca. L x B x H 3,2 x 3,2 x 3,1m (Transporthöhe 2,5m).

Mikron VCE600 Pro CNC Bearbeitungszentrum Hersteller: Mikron Typ: VCE600 Pro Zustand: gebraucht, unter Strom und in Produktion Steuerung: Heidenhain iTNC 530 Inkl. Werkzeug Weitere Informationen auf Anfrage

Mori Seiki DuraVertikal 5080 3Achs Bearbeitungszentrum (11/2006) Hersteller: Mori Seiki Typ: DuraVertikal 5080 Baujahr: 11/2006 Zustand: gebraucht, gut, in Produktion

DMG Mori CMX 600V CNC Bearbeitungszentrum (2018) Hersteller: DMG Mori Typ: CMX 600V CNC Bearbeitungszentrum Baujahr: 2018 Zustand: gebraucht, unter Produktion Einschaltstunden: 514h Spindelstunden: 142h Weitere Informationen folgen

axis stroke (X,Y,Z): 6175x1550x300 mm Number of spindle head vertical: 20 St. Number of spindles head horizontal: 10 St. Number of milling agregates: 1 St. Speed: 24.000 U/min. Capacity: 300 kg/h Sawing unit: ja_yes 0 Control: Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----------------------------------- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° MPU MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMA ...

Key data: 300 mm, 1130 mm

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

x-travel: 1.035 mm y-travel: 560 mm z-travel: 510 mm CNC-control: HEIDENHAIN TNC620 table-size: 1200 x 560 mm max. table load: 1000 kg spindle taper: SK 40 spindle turning speed range: 10.000 U/min drive capacity - spindle motor: 13 kW feed stepless: 20.000 mm/min rapid traverse: 25 m/min tool change unit: 20 Pos. coolant: IKZ 20 bar voltage: 400 V total power requirement: 17 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 2,55 x 2,30 x 2,25 m chip conveyor: 3,90 x 0,95 x 1,60 m coolant tank: - Serial No.: 1539000377A - Machine ON: 21.689 h - Program Run: 9.021 h - CNC-Control: Heidenhain TNC620 - elektronic hand wheel - chip conveyor - coolant through spindle 20 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4200 mm, 1500 mm

Homag CNC BAZ, Optimat 232/40/K Power Control PC85, Woodwop, ATC 12-fold, A lot of accessories, Gluing unit, ... 2 retractable and extendable changing tables, two-part clamping table with 2 processing stations for pendulum assignment, edge height max. 65 mm, chip and offcut disposal, drill head 17 spindles, main spindle 14.5 KW, speed 24000 1/min Incl. many accessories Condition: dismantled

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 14.000 min/-1 power capacity - main spindel: 18,9 / 14 kW max. Torque: 100 Nm tool taper: HSK A-63 NC-Rotary table:: table surface area: 630 x 500 mm max. table load: 300 kg Swivel range: -5 / +110 ° rotation range: 360 ° T-slots: 7x 14 x 63 mm tool magazin:: number of toolpositions: 30 pos. max. tool weight: 6 kg max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. workpiece length: 300 mm feeds:: rapid traverse: 24 m/min Feed force: 4,8 kN feed speeds: 1 - 24.000 mm/min total power requirement: 25 kVA weight of the machine ca.: 5,0 t dimensions of the machine ca.: 4,5 x 3,5 x 2,3 m Documents: Chip conveyor: Coolantsystem: elektr. hand wheel: hydraulic system: elektr. hand wheel: exhaust fan: 3D quickSET: test probe: DMG  ...

Key data: 1050 mm, 530 mm, 510 mm

CNC Vertical Machining Center CNC control: Mazatrol Smooth G Machine table: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40 / DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor, right - Cooling by the spindle 15 bar - Total spindle runtime 8,074 hours If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

CNC Machining Center Hedelius Forte 7-2600 Magnum Control: Heidenhain TNC 640 Year of Make: 2020 Availability: in stock Internal machine no. 73 Travels: X-axis 2,600 mm Y-axis 750 mm Z-axis 800 mm Pendulum operation: 2 x 1,000 mm Total clamping surface 2x 1,490 x 750 mm Table load: approx. 2,500 kg Mount: HSK 63 Tool magazine: 50 compartments Spindle speed: 50 - 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - Chip conveyors - 2x dishwashing gun - Electronic handwheel - Partition wall prepared - High pressure pump 60bar - 0-point clamping platens - Vises and tools as required - Prepared for work space partition wall

CNC Machining Center Hedelius Forte 65 Single 1320 Control: Heidenhain TNC 640 Year of Make: 2019 Availability: in stock Internal machine no. 74 Travels: X-axis 1,320 mm Y-axis 650 mm Z-axis 600 mm Total clamping area 1,500 x 650 mm Table load: approx. 1,200 kg Mount: HSK 63 Tool magazine: 65 compartment Spindle speed: 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - IKZ 25 bar - Chip conveyors - 1x Rinsing gun - Electronic handwheel

This 3-axis DECKEL MAHO DMC 65 V was manufactured in 2003. It features a spindle speed of 18,000 rpm and a tool changer capacity of 30 positions, enhancing its operational efficiency. The machine is equipped with a Heidenhain TNC 426 control system and optional equipment such as tool measurement and an automatic 3D probe. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 65 V vertical machining centre we have for sale. Contact us for further details.

x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm Control: total power requirement: --- kW weight of the machine ca.: 6,8 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece length: 6360 mm profile spindle: 1 Stück main drive: 13 kW Control: Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors --------------------------------------------------- Available as an OPTION at an additonal cost: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden style windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): --------------------------------------------------- - Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparati ...

The machine is in good technical condition; testing is possible by prior arrangement. Fully equipped, with tooling and accessories valued at approx. 1 million. X-axis travel: 1050 mm; Y-axis travel: 900 mm; Z-axis travel: 600 mm. Control system: Heidenhain TNC 640. Max. spindle speed: 18,000 rpm. Table clamping surface: 900 x 750 mm. Tool positions: 42. Tool holder: HSK 63A. Max. tool diameter: 80 (125) mm. Max. tool length: 225 mm. Max. tool weight: 8 kg. T-slots – width: 18 mm; spacing: 100 mm. Center bore: 32 mm. Rotation range: 360°. Tilt range: +/- 115°. Max. table load: 1500 kg. Rapid traverse (X/Y/Z): 35/35/35 m/min. Operating hours: approx. 8,500 h. Spindle hours: approx. 2,500 h. Machine weight: approx. 15 t.

Capacity: 3-axis Stroke: Longitudinal X:300 mm - Vertical Y: 350 mm- Transverse Z: 250 mm Spindle motor: Max speed: 6000rpm Continuous power :3.7 kW Peak power :5.5 kw Table: Dimensions: 300 x 300 mm Mounting: M8 centerline: 50 m Fast travel speed: 10 m/min Fast Rotation Speed B: 10RPM Tool Holder Type: BT40 Number of pitches :20

EDEL CYPORT CP 3020 – 5-Axis CNC Gantry Machining Center Technical Data: Gantry clearance height: 1,380 mm Table size: 5,000 × 2,300 mm A-axis: ±110° C-axis: ±360° Spindle power: 27 kW Spindle torque S1: 130 Nm Spindle torque S6: 170 Nm IKZ: up to 40 bar Workpiece measuring system: M&H with wireless probe Coolant system: with band filter Direct measuring systems: in all linear axes Automatic central lubrication Spindle cooling Ethernet interface Safety features: safety bumper, light grid, and lamella curtains

LARU DHZ 02/1200 DD End Processing Machine Technical Data: - Multi-spindle 3 x 3 - Between centers 1200 mm - Centering - Drilling - Thread cutting - Cooling system - Chip conveyor - Hour counter 25517 H

Key data: 800 mm, 800 mm, 800 mm

DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Interchangeable Table – Used For sale is a used DMG MORI DMC 80H duoBLOCK horizontal machining center. The machine is currently still in productive use and is reliably used in series production. It is mainly used for processing steel and cast iron. Condition: Fully functional and operational. Viewing under power possible by arrangement. Equipment: 4-axis machining Horizontal design for efficient chip removal Changing table (pallet changer) for reduced non-productive times duoBLOCK design for high stability and precision Tool Changer Generous working space for complex components Further details on the equipment are available on request Control manufacturer: Siemens Control model: Sinumerik 840D Workpiece weight (max.): 1,200 kg Total height: 3,100 mm Overall length: 4,850 mm Overall  ...

Manufacturer DMG-MORI Model DMF 260 Year 2011 CNC SIEMENS SINUMERIC 840D Table Table surface 2,900 x 700 mm. Maximum weight on table 2,150 kg. Routes and advances Longitudinal (X-axis) 2,600 mm Transverse (Y-axis) 700 mm Vertical (Z-axis) 700 mm Fast forward of the axes (X,Y,Z) 40 m/min Working progress of the axes (X,Y,Z) 40 m/min Axle acceleration 4 m/s2 Head Revolutions 14,000 mm/min SK 40 Head Cone DIN 69872 Main engine power 18.4 / 14 kW Automatic tool loader No. of Charger Tools 30 Maximum tool length 300 mm Maximum tool weight 6 kg. Maximum tool diameter with adjacent free positions 130 mm Maximum tool diameter without adjacent free positions 80 mm Equipment Refrigeration 40 Bar / 600 l. INCLUDED Longitudinal chip evacuator INCLUDED Coolant cleaning gun INCLUDED Portable steering wheel INCLUDED Direct Measurement System INCLUDED Machine hours  ...

SW BA one6Year of manuf. : 2020 Control : Siemens 840 Dsl Speed : 17500 rpmMovement X/Y/Z : 600/650/500 mmTool holder : HSK 63 ____________Description:In General:Year of manufacture:2020Control system:Siemens 840 DslTravel range X/Y/Z:600/630/500Rapid traverse X/Y/Z:120 m/minSpindle:Technologie:MotorspindelnDrehzahl:17.500 U/minLeistung:35 NmDrehmoment:80 NmWerkzeugaufnahme:HSK-63Swivel mount:Technology:A-axis or U-axis with counter bearingDrive:Direct drive (torque motors)Clamping bridge:Technology:Clamping bridge with 1x NC rotary table eachDrive:Direct drive (torque motors)Table diameter:Ø 340 mmMax. table load:150 kgMax. fixture dimensions:Ø 675 x 450 mmTool magazin:Technology:Chain magazineTool changer:Pick-upNumber of stations:105Max. tool diameter:80 (160) mmMax. tool length:450 mmEquipment:Position measurement systems:Direct on all axes (glass scales)Drive systems:Direct  ...

Key data: 700 mm, 400 mm, 330 mm

A FANUC Robodrill α-D21LiA5 High Power vertical machining centre from 2014 is for sale. No repair machine – no known defects – ready for immediate use. The machine features the powerful FANUC Series 31i-B5 controller, a 21-fold tool changer, MAS BT30 tool holder and extensive equipment with a Renishaw touch probe and tool measurement. This machine also has a 100 mm stand raiser. The machine is ideal for the fast and precise machining of individual parts and series and is very productive, especially due to the high travel and feed speeds. Technical data Manufacturer: FANUC Model: Robodrill α-D21LiA5 Version: High Power Version Year of Make: 2014 Control: FANUC Series 31i-B5 Weight: approx. 2,200 kg Connected load: approx. 11 kVA Travels: X-axis: 700 mm Y-axis: 400 mm Z-axis: 330 mm Machine table: Table size: approx. 850 × 410 mm 3 T-slots ...

Tool breakage / measurement BLUM Electronic handwheel 3 leveling elements Chip conveyor Coolant / belt filter system Interlit SPB 3/600 Auction-ID: A7-50158-13

Horizontal machining center with SIEMENS SINUMERIK 840D control; NC rotary table; Chip conveyor; Coolant system; Coolant through the spindle; Magazine with 2 cassettes of 50 slots each. Auction-ID: A7-50158-15

Chip Conveyor Scraper Belt Coolant system 3 pumps / cartridge filter High Pressure Pump Grundfoss Type CRK2-220/22 A-W-A-AUUV Auction-ID: A7-50158-5

Control SIEMENS Sinumerik 840D powerline with ShopMill, EROWA Pallet System MTS500, Tool Breakage Detection, Coolant System, Coolant through the spindle (23 l/min at 40bar), chip conveyor, electronic handwheel Auction-ID: A7-50158-12

Horizontal machining center with control SIEMENS SIN840D (PCU50); Chip conveyor, gravity belt filter system, IKZ 40bar at 23 l/min; Auction-ID: A7-50158-8

This 5-axis POSmill H 500 U was manufactured in 2020. It features a Heidenhain TNC 640 control system and includes additional equipment such as a chip conveyor and an external cooling unit. With a nominal power of 60 kVA and extensive operational hours, this machine is well-equipped for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the POSmill H 500 U vertical machining centre we have for sale. Contact us for further details.

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: total power requirement: --- kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction: 2019 CNC controller: FS-31iB (MAPPS IVB) Axes X-axis travel mm: 1540 Y-axis travel mm: 760 Z-axis travel mm: 660 Rapid traverse m/min: 20 Worktable Table dimensions mm: 1700x760 Max. workpiece weight kg: 2000 Spindle Spindle speed rpm: 20000 Spindle drive power kW: 18,5/15/11 (10 min./30 min./cont) Spindle torque Nm: 81 (10%ED) Cooling Cooling through the Spindle Center bar: 70 Tool system Tool holder: BT 40 Tool magazine slots: 60 With free neighboring places mm: 125 With occupied neighboring places mm: 95 Max. Tool Length mm: 450 Max tool weight kg: 12 Tool-to-tool time s: 2.1 Equipment Electronic Handwheel Internal cooling lubricant supply Rinsing gun Signal lamp Tool measuring arm Mist collector Heat compensator Program restart Paper band filter Machine running times Under power: 35557 Spindle Working: 27278 Rated power kVA:  ...

FANUC Series 21i-T Control Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-24

DMG MORI DMC 850 VYear of manuf. : 2018 Control : Siemens 840 Dsl - Celos Speed : 20000 rpmMovement X/Y/Z : 850/520/475 mmTool holder : HSK 63 ____________Description:In General:Year of manufacture:2018Control system:Siemens 840 Dsl – OperateTravel ranges X/Y/Z:850/520/475 mmSpeed:20,000 rpmTool holder:HSK 63Spindle:Technology:Motorised spindleSpeed:20,000 rpmMax. power:35 kWMax. torque:130 NmTool holder:HSK 63Fluid supply:Coolant + blast airWorking table:Clamping area:1,160 x 570 mmMax. table load:1,000 kgTool magazin:Technology:Chain magazineNumber of stations:60Tool changer:Double gripperMax. tool diameter:80 (130) mmMax. tool length:300 mmEquipment:Positioning sensors:Direct scalesChip removal:Chip conveyorCoolant supply:Internal coolant system, 20 barWorkpiece measurement:Renishaw Touch probeTool measurement:Tool setterEmulsion mist separator:MechanicalTool coding:Balluf sen ...

CNC Machining Center Kunzmann WF 600 CNC Control: Heidenhain TNC 640 Year of Make: 2015 Internal machine number: 76 Travels: X-axis 600 mm Y-axis 400 mm Z-Axis 400 mm Z-Axis 400 mm Mount: SK 40 DIN69871 Speed: 1 - 5,000 rpm

X-axis 1250/420 mm Y-axis 510/315 mm Z-axis 480 mm B-axis 220° C-axis 360° Drive power 19 kW Max. spindle speed 12000 rpm Tool holder SK40 33 tool positions

Incl. tool changer and the tool holders located inside, with chip conveyor and coolant system. Attention: The machine can be transported on a standard truck! Additional technical specifications: • Nominal current: 80 A • Table: with 9 slots • attached clamping plate, dimensions: 1200 x 810 mm • with three ALLMATIC machine vices, jaw widths: 160 mm

Incl. chip conveyor, incl. 3-D touch probe and incl. the tool holders located in the tool changer! Attention: without the machine vises seen in the photos! Attention: the machine can be transported on a standard truck!

Attention: The machine can be transported on a truck up to 3000 mm wide! Additional technical specifications: • table with 5 slots • with mounted plate, plate dimensions: 900 x 550 mm • incl. vise, jaw width: 125 mm