heller machining center used for sale

Control: Siemens 810 Main drive Number of spindles: 1 Spindle speed range: 12000 1/min Tool holder: Sk 40 Movement X-axis movement: 640 mm X-axis feed: 0-40 m/min X-axis feed force: 7000 N X-axis rapid traverse: 60 m/min X-Axis Precision: 0.027 Y-axis movement: 600 mm Y-axis feed: 0-40 m/min Y-axis feed force: 7000 N Y-axis rapid traverse: 40 m/min Y-Axis Precision: 0.024 Z-axis movement: 500 mm Z-axis feed: 0-40 m/min Z-axis feed force: 7000 N Z-axis rapid traverse: 40 m/min Workpiece Workpiece Z: 500 mm Max. table load: 600 kg Work table Tool Changer Available grooves: 30 Max. weight of tools: 7 kg Max. diameter of the tools: 140 mm

EMCO VMC 600 – CNC Vertical Machining Center • Manufacturer: EMCO Maier Ges.m.b.H., Hallein, Austria • Model: EMCO VMC 600 • Machine Type: CNC Vertical Machining Center • Year of manufacture: 1998 • Serial No.: 06A Y05 • Factory No.: 06A 14 003 • Control: Siemens CNC control • Mains connection: 400 V, 3/PE, 50/60 Hz • Rated current: 27 A • Max. current: 41 A • Short-circuit strength: 6 kA • Operating mode: S6 – 40% Travel paths (typical VMC 600) • X-axis: approx. 600 mm • Y-axis: approx. 400 mm • Z-axis: approx. 400 mm Facilities • Closed work area with sliding doors • Vertical spindle • Tool holder with automatic tool changer • Coolant device with flexible nozzles • Chip tray in the work area • External control panel with screen and controls • Additional monitor above the controller • Pneumatic and lubr ...

CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders.

CNC vertical machining center for machining metal parts. Numerical control: Heidenhain TNC 426 (3D) Strokes: X 1,000 mm / Y 600 mm / Z 600 mm Table: 1,250 ×,800 mm Tool changer: 30 positions Spindle taper: SK 40 (DIN) Spindle speed: up to 15,000 rpm Spindle motor power: 18 / 15 kW IKZ / CTS: 40 bar Equipment: Chip conveyor, air blowing, closed cab

Manufacturer: HAAS Model: VF6 SS Year of Manufacture: 2008 Machine Type : Vertical Machining Center - Control: Haas CNC Axis Travels - X axis: 64 inches (1,625 mm) - Y axis: 32 inches (813 mm) - Z axis: 30 inches (762 mm) Spindle - Spindle speed: 12,000 RPM - Spindle taper: 40 taper (CT40 / BT40) - Spindle type: inline direct-drive, high-efficiency (HE) - Spindle motor: 30 HP Tool Changer - Type: side-mount automatic tool changer (SMTC) - Configuration: high-speed Super Speed ATC Electrical Requirements - Voltage: 360/480V - Phase: 3-phase - Frequency: 50/60 Hz - Full load: 40 amps - Largest load / short circuit: 70 amps - Interrupting capacity: 10,000 amps - Enclosure: NEMA Type 1 - indoor use only Find more here - / Contact us at -

A vertical CNC 3-axis machining center Hurco is available. Travel X/Y/Z: 610mm/510mm/610mm, table dimensions X/Y: 760mm/510mm, max. table load: 700kg, spindle interface: SK40, speed: 10000rpm, rapid traverse: 30m/min, feed rate: 15m/min. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2750mm, weight: approx. 4500kg, operating hours: 68619h. Documentation available. An on-site inspection is possible.

A CNC tube welding system Weil Technology for longitudinal seam welding is available. Tube diameter range: 76mm-600mm, Tube length range: 250mm-1550mm, Material thickness range: 0.8mm-2mm, Welding process: Laser, Max. welding output: approx. 80pieces/h. Documentation available. An on-site inspection is possible.

A vertical CNC 5-axis machining center POS is available. Travel X/Y/Z: 670mm/820mm/600mm, rotary table diameter: 800mm, max. table load: 1200kg, tool positions: 96, tool holder: HSK-63, speed: 18000rpm, A-axis: -100°/120°, C-axis: 360°, weight: approx. 20000kg, control: Heidenhain, operating hours: 22177h, spindle hours: 9601h. Including infrared probe, IKZ and Blum laser tool measurement. Documentation available. An on-site inspection is possible.

A vertical CNC 3-axis gantry machining center POS is available. Travel X/Y/Z: 2050mm/1050mm/780mm, table dimensions X/Y: 2200mm/1000mm, max. table load: 3000kg, tool holder: HSK-63, tool stations: 60, speed: 18000rpm, rapid traverse: 30m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 6500mm/4200mm/3800mm, weight: approx. 20000kg, control: Heidenhain, spindle hours: 10375h. Including infrared probe, IKZ and Blum tool measurement. Documentation available. An on-site inspection is possible.

Vertical Machining Center YCM - VMC 65A / Fanuc OM -CE marking -Control Fanuc OM -Operational condition / function video available -Travel X / Y / Z 650x410x615mm -Table dimensions 840x420mm -Speed range up to 6000rpm -Tool holder BT 40 -Tool magazine / side changer 16 compartment -Electric handwheel -Coolant device -Motor power 7.5 KW -Machine feet Dimensions: LxWxH 3.5x2.4x2.8 meters / Weight 4500Kg

Manufacturer: Weeke Model: Optimat BHC Venture 1 Year of Manufacture: 2006 Operating Hours: 20000h Electrical: - Power Supply: 400V / 50 Hz / 3-phase + N - Total Power: 18 kW - Current: 35 A - Control Voltage: 24V Find more here - / Contact us at -

Manufacturer: EMCO Model: MC 120-60 Year of Manufacture: 2008 Type of Machine : Machining Center Spindle hours: 10,459 CNC Control: Fanuc 18i-MB Tool holder: SK40 Condition: Used, fully functional Axis Travel - X axis: 1,200 mm - Y axis: 600 mm - Z axis: 500 mm - 4th axis: Yes, installed - 5th axis: No Equipment and Features - Tool magazine: 30 positions - Band filter: Yes - Chip conveyor: Yes - SK40 toolholder package included - Fully operational Lang Eco Compact 10 automation system with 10 vices included - Custom-built slatted loading rack for ergonomic loading and unloading of machine and - automation Find more here - / Contact us at -

Working field: axis x: 3200 mm, axis y: 944 mm, axis z: 110mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill holder: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 24 horizontal spindles in X, 10 vertical spindles in X line Working pressure air pressure: 6 bar Installed power: max 25 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit

Working area: X 5200 x Y 1260 mm Heading of main spindle: X 5709 mm, Y 1650 mm 8 workpiece consoles Equipment: Drilling unit with 18 spindles, 12 vertical sp?ndles, 6 horizontal spindles (4 in direction X , 2 in direction Y ) Grooving saw Milling motor 11 kW, 20000 rpm max, HSK-F 63 take-up, liquid-cooled, 5-axis controlled Tool changer with 16 positions Laterally positioned changer with 8 positions PC control

Duration 14394 Hours Workspace Distance pallet surface – spindle center: 75 – 995 mm Distance between pallet centre and spindle head: 150 – 1,140 mm Max. workpiece size: 1,050 × 1,115 mm Pallet table Pallet size: 630 × 630 mm (option 800 × 800 mm) Max. table load: 1,200 kg Spindle Speed range: 45 – 12,000 rpm⁻¹ Max. torque: 451 Nm (up to 550 rpm⁻¹) Tool holder: HSK 100 High-pressure cooling Coolant pressure: 50 bar Tool Changer Tool stations. 60 Pieces Max. tool weight: 20 kg (option 30 kg) Max. tool diameter: 110 mm (at full occupancy) 230 mm (for free neighboring stations) Max. tool length: 600 mm NC table (B-axis) Indexing increment: 0.001° Indexing time 90° (incl. clamps): 2.1 s Indexing time 180° (incl. terminals): 2.5 s Indexing Accuracy: 5\" Repeatability: ± 2\" Rapid traverse B-axis: 27,000°/min B-axis feed: 0 – 27,000 ...

Travel X/Y/Z: 1600mm/400mm/425mm, table dimensions X/Y: 2000mm/400mm, max. table load: 350kg, tool positions: 12, tool holder: SK30, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2800mm, weight: approx. 5000kg, control: Siemens Sinumerik. The hoses, the Y-axis cover, and the battery (data loss) are in need of repair. An on-site inspection is possible.

A Schüco roll crimping machine for joining aluminum half-shells with polyamide insulating bars in thermally broken profiles is available. Profile throughput speed: approx. 34m/min, max. profile installation depth: 250mm, max. profile height: 400mm, max. insulating bar spacing: 300mm, machine dimensions X/Y/Z: approx. 900mm/900mm/1650mm, weight: approx. 750kg. Including infeed and outfeed. Documentation available. An on-site inspection is possible.

A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible.

GX- Performance VMCs Dr HeidenHain iTNC530 with HR 410 Handwheel Coolant system Rigid sructure and superior reliability Central lubrication Specifications Displacement X - axis 800 mm Displacement Y - axis 540 mm Displacement Z - Axis 540 mm Table length 900 mm Table width 540 mm Table load 700 Power supply X-axis 36000 mm/min. Nutrition Y-axis 36000 mm/min. Z-axis power supply 36000 mm/min. Spindle holder 40 ISO/Bt/Mk Power at the pivot 13 KW Touring - Range 8000 Rpm Tool Changer 20 Number of steered axles 3 Chip conveyor Yes Cooling system Yes Auction-ID: A1-44905-196

- Usable working area approx. 5000 x 1400 mm. - Axis C. - Tool magazine with 18 positions. - Electrospindle: power 7.50 KW, automatic tool change, for HSK F63 tool holder. - Vertical holes in the x-axis direction: 11. - Vertical holes in the y-axis direction: 11. - Horizontal holes in the x-axis direction: 1 + 1. - Horizontal holes in the y-axis direction: 1 + 1. - Edging unit with edge loader for 2 coils. - IMA numerical control. - 8 benches. - Lifting modules for heavy parts. - SIEMENS 2BL1100-2NC00-1S-Z vacuum pump, 2.35 KW motor. - Tools (10) and add-ons (3) that appear in the photographs are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-18

Model: Mori Seiki MV-653/50 (Year 2000) Travels (X/Y/Z): 1530 x 660 x 650 mm (60" x 26" x 25.6") Table Size: 1700 x 660 mm (67" x 26") Spindle Taper: CAT 50 / BT 50 Spindle Speed: 6,000 RPM (High Torque) Motor Power: 22 kW (30 HP) ATC Capacity: 30 Stations Machine Weight: 16,000 kg (35,270 lbs) Find more here - / Contact us at -

Core Technical Specifications (2001 Model)The "70" in the name typically refers to the X-axis travel (approx. 700 mm).FeatureSpecificationX-axis Travel710 mm (Standard)Y-axis Travel520 mmZ-axis Travel520 mmB-axis (Swivel)-10° to +95° (NC-controlled)C-axis (Rotary)360° (NC-controlled)Table SizeØ 700 mm x 500 mm (NC Swivel-Rotary Table)Max. Table Load350 kgSpindle Speed12,000 RPM (Standard) up to 18,000 RPMTool TaperSK 40 or HSK 63Tool Magazine30 to 64 positions

Offered is a horizontal machining center (HMC). Travels X/Y/Z: 560mm/510mm/510mm, max. dynamics: 40000mm/min, spindle: 12000rpm, tool holder: MAS BT 40, tool magazine: 60 positions (chain magazine), pallet system: 2-station pallet changer, pallet size X/Y: 400mm/400mm, accessories: approx. 200 tool holders (BT 40), 2 MMI towers with 8 clamping bars, hinged belt chip conveyor, Blum laser/probe, Renishaw 3D probe, machine weight: approx. 9000kg. Inspection possible by appointment.

Masterwood Project 523 XL CNC machining center • Year : 2006 • Axes : X 6200 mm / Y 1660 mm / Z 175 mm • Drilling head: 40 chucks, inverter-driven• Saw unit: longitudinal incisions • Electrospindles : 2 x 8 kW ISO30 (including one with C-axis ) • Tool magazines:  2 x 8 quick positions • 12 Schmalz bars with double vacuum zone • Digital display for bar positioning and suction cups • Predisposition for vices and clamps • Side and front stops • 2 panel lifting blades • Chip collection belt • Mobile remote control • Vacuum pump: 250 m³/h • Suction : 1 mouth Ø250 mm + 1 mouth Ø120 mm (flow rate 6500 m³/h) • Power supply: 400 V / 41.7 A / 50 Hz• Weight  : 5500 kg  ...

MORI SEIKI MH 40 FANUC horizontal machining centre X-axis travel: 560 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Pallet size: 400 x 400 mm Table Rotation (B-Axis): 360° (with minimum division 1° or 0.001°) Spindle Mount: BT-40 Spindle Speed: 6,000 rpm Tool Changer (ATC): 40 Total machine weight: approx. 9,500 - 10,500 kg Floor Dimensions (W x D): Approx. 2,300 x 4,200 mm Height 2350 mm Auction-ID: A7-44885-21

Usable working area: X: 3248 mm Y: 1390 mm Z: 110 mm Configuration: 16-core drill head 8 kW electro-chuck – ISO30 8 kW frequency inverter Saw for longitudinal incisions Horizontal milling unit with 1 output – 2.2 kW 10-position tool magazine – ISO30 carriage edge Adapter support plate for index heads Table: Work table with bars and suction cups 2 stops per bar 6 × suction cups 114 × 140 mm – H 100 (to be confirmed) 6 × suction cups 125 × 75 mm – H 100 longitudinal (to be confirmed) Equipment: Vacuum pump 100 m³/h CN on external PC (PC included) 17\"PC TFT display and instructions in English Power supply: 400 V – 50 Hz Compliance: CE safety standards STANDARD version Dimensions (estimated): Length approx. 6,500 mm × Width approx. 4,100 mm × Height approx. 2,400 mm (to be confirmed) Weight (estimate): approx. 5,000 kg (to be confirmed) Auction-ID: A1-45443-70

Selca 4045 PDH control X-axis (longitudinal): 1,650 mm Y-axis (Transverse): 600 mm Z-axis (Vertical): 640 mm Distance between Spindle Nose and Table: 120 – 760 mm Fast Feed (X/Y/Z): 60 / 60 / 60 m/min Spindle Specifications (Built-in) The system uses a direct drive electrospindle to eliminate thermal drift and vibrations typical of belt drives Maximum Speed: 12,000 rpm Power (S1 100% / S6 40%): 25 kW / 35 kW Maximum torque (S1 / S6): 110 Nm / 160 Nm Tool connection: ISO 40 - DIN Cooling: Liquid circuit with dedicated heat exchanger. Permissible Weights and Loads The fixed table allows high loads to be handled without affecting the dynamics of the axes. Table dimensions: 1,800 x 600 mm Maximum load allowed: 4,000 kg (distributed) T-slots: 18 mm (100 mm wheelbase) Floor space approx. 5,225 x 3,400 mm Maximum Height: 2,760 mm Worktop height: 900 mm (from the ground)  ...

FEELER FV 600 A vertical machining center Base: Stabilized Meehanite cast iron X-stroke: 600 mm Y stroke: 400 mm Z stroke: 450 mm Table: 700 x 400 mm Max load: 350 kg Spindle: 8,000 - 10,000 RPM Mount: BT 40 / ISO 40 Motor: 5.5 / 7.5 kW Tool Changer (ATC): 20 Random Positions Guides: Linear recirculating ball bearings Rapid: 24 - 30 m/min CNC: Fanuc Series 0-MC Accuracy: ±0.005 mm Weight: approx. 3,200 kg Overall dimensions: 2000 x 2200 x h 2200 mm Auction-ID: A7-44885-19

Machine: BIESSE CNC machining center Table: 3060 x 1260 x 150 mm Solenoid Spindle: 12 kW, ISO30 Cone Tool changer: 10 positions Vacuum pump: 100 m³/h Consoles: 6 with 3 ATS suction cups Drilling Head: 15 Vertical + 4 Horizontal Pins X Saw: Ø125 mm Accessories: 4-position flange, bevel gearbox, flange for aggregates Equipment: chip recovery belt, Biesse WORK software, B_NEST Auction-ID: A1-45443-23

Usable working area: X: 4970 mm Y: 1390 mm Z: 110 mm Configuration: 16-core drill head Electro-chuck 8 kW – ISO30 Frequency inverter 8 kW Saw for longitudinal incisions Horizontal milling unit with 1 output – 2.2 kW 8-position tool magazine – ISO30 carriage edge Adapter support plate for index heads Table: Work table with bars and suction cups Pneumatic locking table 2 stops per bar 8 × suction cups 114 × 140 mm – H 100 (to be confirmed) 8 × suction cups 125 × 75 mm – H 100 longitudinal (to be confirmed) 8 × suction cups 120 × 50 mm – H 100 longitudinal (to be confirmed) 8 front stops + 2 additional side stops Equipment: Vacuum pump 250 m³/h CN on external PC (PC included) 17\" PC TFT displayMastercabinet Level 1 Power supply: 400 V – 50 Hz Compliance: CE safety standards version L Dimensions: Estimated height: approx. 2400 mm (to be confirmed) Auction-ID: A1 ...

BRIDGEPORT XR 760 high-performance vertical machining center Structure: Thick cast iron with wide column design X stroke: 760 mm Y stroke: 490 mm Z stroke: 520 mm Table: 900 x 500 mm Max load: 600 kg Spindle: 12,000 RPM Connection: BT 40 Motor: 13 kW (S1) / 18.5 kW (S6-25%) Tool changer (ATC): 30 positions (quick changer arm) Guides: Linear roller with high load capacity Rapid: 36 m/min (X/Y/Z) CNC: Heidenhain iTNC 530 Accuracy: ±0.005 mm (Positioning) Weight approx. 6,750 kg Overall dimensions: 2400 x 2300 x height 2,400 mm Auction-ID: A7-44885-7

Quaser MV 154 P Vertical Machining Center Corsa X 1020 ; Y 530 ; Z 540 mm Table: m{1.200 imes 500 ext{ mm}} (Max load: 500 kg) Spindle: 12,000 rpm (Direct Drive) Spindle power: 18.5 kW Tool magazine: 30 stations (Quick Arm Change) Fast feeds: 36 m/min (all axes) CNC: Fanuc 0i-MD Features: High Speed (AICC II), Advanced Look-ahead for superior surface finishes. Length (with conveyor): ~3,800 mm Width (depth): ~2,200 mm Height: ~2450 mm Machine Weight: 5.300 kg Auction-ID: A7-44885-18

Atlas machining center tubeless version X-axis stroke = 6000 mm Power supply 400V 50Hz Europower supply Anuba Group in CA Anuba Diam.13 sheet Vertical support for milling unit 0/90pn Upright position n.2 Milling unit 15HP Index HSK F63 Fixed head with 2 outlets blade holder D=220 + cutter holder - HSK 63 F Tool Holder 14 pos.side trolley HSK63 Front upright position Drill head Saw for longitudinal incisions 11 kW frequency inverter 8 suction cups 114X140MM - H 100 (to be confirmed) 12 suction cups 125x75MM - H 100 longitudinal (to be confirmed) 2 suction cups 114x140mm - H 75 for blocking. Template (to be confirmed) 3 additional vacuum devices for workpiece blocking 2 pneumatic vertical pressers supp. - 1 MVT. - 100 hours (to be confirmed) 2 horizontal pneumatic vices (to be confirmed) Positioning 10 bars + suction cups on display CE safety standards for atlas bati xl Atlas  ...

Machine: MASTERWOOD PROJECT DOORS Machining Center Year: 2001 Machining Range: X 2500 mm, Y 1360 mm, Z 100 mm (120 mm pass-through) Front Position: 2.2 kW horizontal unit, 8 kW ISO30 solenoid spindle, 8 pos. ISO30 Rear Position: 2.2 kW horizontal group, 14 inch rotating magazine. ISO30, manual tilting X/Y index head Table: belt-driven, vacuum pump 100 m³/h Belt: chip evacuation Order: Windows PC + SINCRO software Standards: EC Auction-ID: A1-45443-40

Machine: MASTERWOOD PROJECT DOORS Machining Center Year: 2001 Machining Range: X 2500 mm, Y 1360 mm, Z 100 mm (120 mm pass-through) Front Position: 2.2 kW horizontal unit, 8 kW ISO30 solenoid spindle, 8 pos. ISO30 Rear Position: 2.2 kW horizontal group, 14 inch rotating magazine. ISO30, manual tilting X/Y index head Table: belt with vacuum pump 100 m³/h Belt: chip evacuation Order: Windows PC + SINCRO software Standards: EC Auction-ID: A1-45443-39

Heidenhain TNC 426/430M control Racing and Board: X-axis (longitudinal): 1,000 mm Y-axis (Transverse): 600 mm Z-axis (Vertical): 600 mm Table surface: 1,200 x 600 mm Maximum Table Load: 800 kg Speed 10,000 rpm (belt or direct drive) Tool Mount: SK 40 / BT 40 Spindle power: approx. 9 - 13 kW (S1/S6) Torque: ~82 Nm Fast Feeds: 30 m/min (X/Y/Z) Tool magazine: 24 spaces (basket or chain configuration with exchange arm) Tool Change Time: ~1.6 - 2.5 seconds (T-to-T) Total Weight: approx. 6,500 kg Floor space approx. 3,500 x 2,400 x 2,800 mm TOOLS NOT INCLUDED Auction-ID: A7-44885-2

CNC Control: FANUC series O-M Axis strokes: X 600 mm / Y 420 mm / Z 450 mm Table: 750 × 400 mm Spindle speed: 6000 rpm Spindle power: 13 kW Spindle taper: ISO 40 Tool changer: 30 positions Included equipment: NIKKEN 4th axis divider Ø 250 mm Year: 1989 Manufacturer: SIGMA Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-267

X / Y / Z axis strokes: 1020 × 510 × 550 mm Spindle power: 11 kW Max. spindle speed: 6,000 rpm Spindle taper: BT 40 Tool magazine: 22 positions Weight (kg): approx. 6000 Year & Manufacturer: 1993 – FONG LEE Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-251

CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-203

CNC vertical machining center for machining metal parts. Numerical control: Heidenhain TNC 426 (3D) Strokes: X 1,000 mm / Y 600 mm / Z 600 mm Table: 1,250 ×,800 mm Tool changer: 30 positions Spindle taper: SK 40 (DIN) Spindle speed: up to 15,000 rpm Spindle motor power: 18 / 15 kW IKZ / CTS: 40 bar Equipment: Chip conveyor, air blowing, closed cab Auction-ID: A1-44765-243

CNC vertical machining center for machining metal parts. Numerical control: Siemens Sinumerik 810D Powerline Strokes: X 640 mm / Y 600 mm / Z 500 mm Table: 850 × 600 mm Maximum table load: 600 kg Spindle taper: SK 40 (DIN 69871) Spindle speed: 1 – 8,000 rpm Fast feeds: X 70 m/min / Y 40 m/min / Z 40 m/min Tool changer: 30 positions Spindle motor power: 12 / 17 kW Energized hours: 43,000 h Operating hours: 15,000 h Note: Without tool holder Auction-ID: A1-44765-242

Manufacturer: DMG (Deckel Maho Gildemeister) Year: 2006 Type: CNC Vertical Machining Center Numerical Control: Heidenhain TNC 530 Strokes: X 635 mm / Y 510 mm / Z 460 mm Spindle: 12,000 rpm Tool magazine: 32 positions Spindle center coolant: 20 bar Filtration: Cartridge filtration Tooling: No tooling supplied with the machine Weight (kg): approx. 6000 Notes: Multi-purpose CNC vertical machining center. Serial number included in the description. Auction-ID: A1-44765-216

Manufacturer: HERMLE Year: 1999 Type: Universal CNC machining center Numerical control: Heidenhain TNC 430 PA Axes: 5 axes (3 linear axes + 2 rotary axes in positioning) Strokes: X 800 mm / Y 500 mm / Z 500 mm Table: integrated roto-pallet table – max. load 250 kg Spindle: ISO 40 – 20 to 15,000 rpm Tool magazine: 30 tools SK40 Equipment: remote crank, external coolant, external blowingWeight: approx. 8,500 kg Notes: Robust and precise CNC universal machining center, functional machine. Auction-ID: A1-44765-224

CNC vertical machining center for machining metal parts. CNC control: Heidenhain TNC 410 Axes: 3 axes Strokes: X 1,020 mm / Y 610 mm / Z 560 mm Table: 1,400 ×,650 mm Maximum load table: 2,000 kg Spindle taper: BT 40 Spindle speed: 10,000 rpm Spindle power: 15 kW Tool changer: 40 positions High-pressure coolant: 20 bar through spindle Equipment: Chip conveyor, 2 augers, spindle cooling, closed cab, machine lighting Auction-ID: A1-44765-247

CNC Control: FANUC 0M (original manual) Number of axes: 3 Axis strokes: X 1100 mm / Y 650 mm / Z 800 mm Maximum spindle speed: 8000 rpm Cooling: with coolant Spindle taper: BT40 Tool changer: automatic, 30 stations Year: 1994 Manufacturer: SUPERMAX Auction-ID: A1-44765-269

Manufacturer: DOOSAN Year: 2008 Type: CNC Vertical Machining Center Numerical Control: FANUC 0i-M Series Strokes: X 1020 mm / Y 510 mm / Z 525 mm Fast Feeds: X/Y 36 m/min – Z 30 m/min Spindle: 12,000 rpm – 11 kW (continuous) Tool magazine: 30 tools Table: 1200 × 500 mm – max. load 799 kg Accuracy: ±0.005 mm – repeatability±0.003 mm Dimensions (mm): 2795 × 2850 × 2275 Weight (kg): 6500 Auction-ID: A1-44765-211

Technical data Manufacturer: Hurco Model: VMX40 Machine Type: Vertical CNC Machining Center Year of manufacture: 12/2000 Serial Number: M442-01219120AFC Machine Number: Q-6695 Control: Hurco Ultimax Operating hours: 37,207 h Voltage: 380 V Frequency: 50 Hz Connection: 63 A Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Emergency stop available Network connection (10BASE-T) Interfaces: Port 1 / Port 2 / Coax Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation. Auction-ID: A7-45416-32

CNC Control: SIEMENS 810 D X/Y/Z axis strokes: 1020 × 510 × 510 mm Table dimensions: 1200 × 500 mm Permissible load on table: 800 kg Max. spindle speed: 10,000 rpm Spindle power: 10 kW Spindle taper: ISO 40 Tool changer: 20 positions Weight (kg): 5800 Year & Manufacturer: 2000 – HURON Auction-ID: A1-44765-250

Manufacturer: HEAD / KENT Model: CUV-10 (KMV 10) Year: 1999 Robust CNC vertical machining center, Meehanite cast iron construction, suitable for machining single parts and small to medium series. Numerical control: FANUC OMD Structure: Meehanite cast iron Turcite B-coated slides Rigid thread Portable electronic crank Full protective guard Sprinkler system Work light and end-of-cycle lamp Toolbox Races: X: 1,020 mm Y: 510 mm Z: 510 mm Distance between spindle nose and table: 105 to 740 mm Table: Dimensions: 1,200 × 600 mm T-slots: 18 mm – 3 grooves Max. permissible load: 1,000 kg Spindle: Speed: 30 – 7,500 rpm Transmission: ZF gearbox – 2 ranges Cone: BT 40 Engine power: 11 kW Feeds: Fast feed (X,Y,Z): 24 m/min Working feed: 1 – 10,000 mm/min Tool changer: Capacity: 20 tools Max. tool weight: 6 kg Bidirectional selection Machine dimensions: 2,880 × 2,420 × 2,980 mm Floor space  ...

Manufacturer: HURON Year: 2001 Type: 4-axis CNC vertical machining center Numerical control: Siemens Sinumerik 840D Strokes: X 700 mm / Y 600 mm / Z 450 mm Table: 800 × 600 mm – max. load 500 kg 4th axis: Integrated rotary table Spindle: HSK63-A – SKF – 24,000 rpm – 18 kW (spindle overhauled in 2024, approx. 1,000 h) Tool magazine: 20 stations Dimensions (mm): 3000 × 2100 × 3300 Weight (kg): 8000 Remarks: High-speed machining center with 4th axis. Machine used, functional. Auction-ID: A1-44765-215