135,506 used machines on RESALE, but how to find them? Machine Search
560mm Width – Keypad Electricity 220/240 V – 50 Hz Dimensions: 100 x 60 x high 52cm
SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine
tube diameter: 50,8 mm wall strength: 1,0 mm square edge steel: 50 x 50 x 1 mm round bar steel: 25 x 6 mm weight of the machine ca.: 46 Kg dimensions: 0,6 x 0,4 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MANUFACTURER GMP WIDTH (MM) 1550 HIGHT (MM) 1210 WATT 100 AMPERE 0.4 MORE INFORMATION LAMINATING SIZE: 1120MM TYPE EXCELAM-Q1120COLD/RS DEPTH (MM) 610 VOLT 230
ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area ...
Used spiral kneader DIOSNA, type: SP 160 D -In bakery condition- - up to 160 kg dough / approx. 100 kg flour - Condition: Good, ready for immediate use The kneader is in good used condition and is immediately ready for use. Visits and test runs are possible by arrangement.
Used dough divider KEMPER, Type: Imperator CT -In bakery condition- The machine is still being refurbished. Visits and test runs are possible by arrangement.
Bottle washer, make Klinger, type: Superserpende 16/0,5 Liter, for 10.400 bph nominal capacity, 16 bottles/row, with 85 mm bottle cells, runs on 0,5 lt and 0,33 lt bottles, with Siemens S5 control, can still be seen in operation.
Bottle washer, MAG, 10 bottles / row, with 80 mm plastic cells, built in 1991
Viewing by appointment Auction-ID: A1-40403-31
Bottle washer, make O+H, type: Contitact, for 12,300 fl/h, with 80 mm bottle cells, built 1987
Labeler, make Krones, type: Vinetta 6-3-3/180, control range: 1.700 - 4.800 bph, for 0,7/0,75 lt and 1,0 lt bottles, with 2 stations for body-, shoulder- and back label, direction: right->left, built 1985
Used and unchecked; viewing desired Auction-ID: A1-50737-88
Auction-ID: A1-50608-106
Labeler, make Krones, type: Robusta 10-4-4, for ~20.000 bph, with 10 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,2 lt, 0,33 lt., 0,5 lt. and 0,7 lt. bottles, for body, shoulder and back label, with around safety casing, with Siemens S5 control, built 1997
Labeler, make Krones, type: Universella 18-8-6. with 2 glue pumps, conveyors, sets for 0,25 lt + 0,33 lt Gastro crown cap, 0,33 lt Longneck screw cap, 0,5 lt NRW brown crown cap, 0,5 lt NRW white screw cap, 0,7 lt GDB screw cap, 0,75 lt Gastro screw cap, built 1998.
Labeler, make Krones, type: Bonamatic 1.240-20-4-4, with 20 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,7 lt. bottles, with 3 aggregates, for body, shoulder and back label, as too for neck ring and foot label, with cam-bottom adjustment, with around safety casing, with Siemens S5 control, built 1990
Labeler, make Krones, type: Prontomatic 720-21-8-8-110 RM, for 0,7 lt GdB bottle, for 24.000 bph, for body-, shoulder- and back label, right -> left counter clockwise, with 2 heated glue pumps, built 1997
Labeler, make KHS, type: Innoket KL 2080/120-48, speed up to 50.000 bph, right-machine, for cold glue labelling, adjust to 0,33 lt. and 0,5 lt. Longneck-bottles as too 0,5 lt. NRW-bottles, with 2 aggregates for body-, shoulder- and back label, as too neck ring, with 48 bottle dishes, 5 gripper cylinder, 6 glue pallets, with steel glue roller, carousel-Ø: 2.080mm, pitch: 120 mm, with Siemens S7 control, built 2003
General Description Heavy-duty conventional engine lathe of likely Soviet/Eastern European manufacture, designed for turning, facing, boring and threading large cylindrical workpieces. The machine is equipped with a geared headstock, large independent chuck, heavy-duty carriage and manual controls suitable for general machining applications. Technical Details Manufacturer: Not identified Model: Not identified Machine type: Heavy-duty conventional engine lathe Year: Not confirmed Power supply: 380 V, 3-phase, 50 Hz Rated current: 63 A Starting current: 756 A (electrical plate) Large 4-jaw independent chuck (approx. 700–900 mm) 4-way tool post Quick-change gearbox Leadscrew and feed rod Tailstock Electrical control cabinet Condition Used industrial condition. The machine appears mechanically complete with headstock, carriage, tailstock and electrical cabinet install ...
Labeler, make Krones, type: Variomatic, for 12.000 bph, adjust to 0,5 lt. and 0,75 lt. bottles, with 3 aggregates, for Body- shoulder and back label, as too with additional label dispenser for self-adhesive labels, with around safety casing, built-on control cabinet, year of origin: 1998
Labeller, make Krones, type: Universella 600-15-8-6-130, 2 aggregates for cold glue label at body, shoulder, back; Videojet dating built 1995
Horizontal turning machine manufactured in 2000. This Gildemeister CTX 500 S2 features a maximum turning diameter of 455 mm and a turning length of 1097 mm. It includes a robust tool system with a disc turret and a maximum chuck diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 500 S2 machine we have for sale. Contact us for further details.
This 3-axis DMG MORI CLX 550 V3 was manufactured in 2020. It features a maximum turning diameter of 480 mm and a turning length of 1240 mm. The machine is equipped with a 12-position VDI 40 turret and a maximum spindle speed of 3250 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V3 horizontal turning machine we have for sale. Contact us for further details.
used
Siemens X-ray system type Multix / Vertix Swing with generator POLYDOROS IT/S in good condition
Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE
Eyelet machine Hang 87 F, machine number 38960, 3 eyelet heads, eyelet diameter 5.5 mm, inner diameter 5 mm, waste suction device, in good condition, immediately available
M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm
bore capacity in steel (diameter): 25 mm throat: 175 mm bore stroke: 50 mm : 16 mm spindle taper: ISO 30 spindle turning speed range: 50 - 3000 U/min : 380 mm : 175 mm table surface area: 700 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,75 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 6-axis DMG MORI CLX 450 V6 was manufactured in 2021. It features a maximum turning diameter of 400 mm, X-axis travel of 276 mm, Y-axis travel of ±60 mm, and Z-axis travel of 755 mm. The machine is equipped with a 12-position VDI 40 turret and a powerful spindle with a maximum speed of 4,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CLX 450 V6 machine we have for sale. Contact us for further details.
This 3-axis DMG MORI CLX 550 V3 was manufactured in 2023. It features a maximum turning diameter of 480 mm and a turning length of 1240 mm. The machine is equipped with a powerful spindle capable of 3,250 rpm and a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V3 horizontal turning machine we have for sale. Contact us for further details.
Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 rpm - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Foot switch - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg
This 3-axis DMG MORI CLX 450 V3 was manufactured in 2023. It features a maximum turning diameter of 400 mm and a turning length of 800 mm, with an X-axis travel of 271 mm and Z-axis travel of 830 mm. The machine includes a 12-position VDI 40 turret and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V3 horizontal turning machine we have for sale. Contact us for further details.
Folding unit GUK FA 50-2 2nd station; good condition; cleaned and tested; Inlet width 500mm; 2 folded pockets; Self-control. Folding unit GUK FA 50-2 secound unit; good condition; cleaned and checked; working witdh 500mm; two pockets; Automatic control.
bore capacity in steel (diameter): 30 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 565 mm : 220 mm table surface area: 840 x 210 mm connected load frequency: 400 V max. distance between table and spindle-nose: max. 470 mm total power requirement: 1,1 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine was regularly serviced, was in operation until recently, with documentation and accessories, an on-site inspection is possible.
Max. press force: 82kN, total stroke: 200mm, power stroke: 12mm, min./max. air pressure: 3bar/6bar, machine weight without tooling: 610kg. Inspection possible by arrangement.
Offered is a pad printing machine with protective enclosure. Equipped with plate holder, printing pads and remaining inks, where available. Operating usage: approx. 4000 cycles/year. Weight: approx. 400kg. Overall dimensions X/Y/Z: approx. 1300mm/1000mm/1790mm. Inspection possible by arrangement.
Hoehn machine - Cross grinding machine Sunnen ML 3500 (similar to ML5000) complete with external tank with paper filter and magnetic separator The machine is in our warehouse in Gussago BS, energized Test run possible Mimu Machine Tools Italy
HM501, 3-fold head stitch 70. New Beckhoff PLC (Retrofit 2021)
The machine is in good technical condition and can be tested by prior arrangement. Specifications: 160 mm turning diameter, 285 mm turning length, 40 mm spindle bore, 6000 rpm, 8-position tool turret, hydraulic tailstock, Siemens 840C control system. Includes a laptop with RS-232 connectivity for transferring programs (e.g., from CAM software) to the lathe, as well as the tools currently on the turret, a hydraulic chuck, an extraction system, etc. Unfortunately, the PLC data was lost during a prolonged period of inactivity; however, the Siemens system itself remains intact, so anyone familiar with the system can simply reload the backup and get the machine running again.
We offer you an add-on snow blower (two-way) from the company Schmidt. - Model VF-Z-55-1-004 - fully functional - Year of construction: 2001 - Total mass 1540 kg - Voltage 24 V - Working area roadways (road and rail (standard gauge: 1435 mm) - Room width 2.40 m - Ejection width 41 cm - Drive via PTO shaft front - suitable for Unimog / road-rail Unimog If you have any further questions, please feel free to contact us or visit us Errors and information Errors excepted! No guarantee or warranty. Prior sale and errors excepted. ANB Handel & Service Inh. M. Schönau Halbmondsweg 399885 Ohrdruf
maximum number of results exceeded
please refine your search
2.500 € 
