136,908 used machines on RESALE, but how to find them? Machine Search
Bihler B-4/2 Welding Control System. Connection: 400 V 50 Hz. Equipped with welding component ET50.6 . Year of manufacture: 1988/04. Made in Germany. More Bihler and Bruderer machines on stock.
clamping force: 500 kN injection volume: -- cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping force: 500kN, tie-bar spacing: 320x320mm, cylinder diameter: D30, control: Arburg SLOGICA, automatic operating hours: 63.147h, pump operating hours: 65.755h, semi-automatic operating hours: 14h, cycles: 13.943.435. An on-site inspection is possible.
This 3-axis EMCO Emcoturn 65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine offers an impressive X-axis travel of 260 mm and Z-axis travel of 610 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 65 horizontal turning machine we have for sale. Contact us for further details.
Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.
X – Axis Travel (600 mm) Y – Axis Travel (400 mm) Z – Axis Travel (270 mm) U, V Axis Travel (80 x 80 mm) Wire Diameter Range (min ~ max) (0.10 ~ 0.30 mm) Work Tank Dimensions (W x D) (1040 x 780 mm) Maximum Workpiece Weight (850 kg)
DESCRIPTION: • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Centrally adjustable cup chain • Product feed for blister via blister stack shaft • Monitoring of packaged goods height in cup chain • Code reading Laetus Argus 4 for 2x brochure code (front + back), 1x folding carton code, 1x brochure presence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with anti-ejection control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz
Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details.
Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Eeep90t Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg
Horizontal turning machine manufactured in 1999. This Gildemeister CTX400 Serie2 features a maximum turning diameter of 420 mm and a distance between centers of 600 mm. It includes a disc turret with 12 tool stations and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX400 Serie2 machine we have for sale. Contact us for further details.
This 3-axis DAEWOO PUMA 400MB was manufactured in 2002. It features a maximum machining diameter of 460 mm and a maximum machining length of 1,050 mm. The machine is equipped with a spindle speed range of 30–3,000 rpm and a tool turret with 12 stations. If you are looking to get high-quality CNC turning and milling capabilities, consider the DAEWOO PUMA 400MB machine we have for sale. Contact us for further details.
This 3-axis OKAMOTO ACC 84DX surface grinding machine was manufactured in 2013. It features a table size of 800 x 400 mm and a stone diameter of ø355 mm. With its robust design, this machine is ideal for precision grinding applications. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 84DX machine we have for sale. Contact us for further details.
Jac Bread Slicer Gate Gate machine Cutting width: 10mm Manual operation 400V 50Hz Height: 110cm Width: 60cm Depth: 80cm
KD sheet metal cleaning machine Type: KD Plaster for 2-edge sheets double brush Restitution Emergency Stop Switch Stainless steel cladding on rolls
Plasma cutting machine manufactured in 2020. This PLASMACUT 3015T features a cutting area of 3,020 × 1,520 mm and a maximum plate thickness of 50 mm. It includes a robust gantry drive system and operates with a Hypertherm Powermax 105 Sync plasma power source. If you are looking to get high-quality plasma cutting capabilities, consider the PLASMACUT 3015T machine we have for sale. Contact us for further details regarding this machine.
CNC shearing machine manufactured in 2024. This GEKA HYDRACROP 165/300 SD features a punching power of 165 tons and a maximum capacity of Ø 40 x 30 mm or Ø 34 × 34 mm. It includes five workstations for various operations such as punching, shearing, and notching. If you are looking to get high-quality shearing capabilities, consider the GEKA HYDRACROP 165/300 SD machine we have for sale. Contact us for further details.
Rösen & Robbert Bread Slicer Type: Spa Bayern analog control Cutting width adjustable from: 3 – 15mm for cutting round and elongated breads with lubrication system can be driven on castors External dimensions width 104cm depth: 75cm height:107cm
Caprigiani Pastochef Ice Cream Maker Stainless steel with agitator and cooling Unfortunately strong signs of use Net price. Plus VAT ex stock
CNC punching machine manufactured in 2007. This AMADA EMZ 3610 NT features a press force of 300 kN and a travel distance of 2500 mm in the X-axis and 1525 mm in the Y-axis. It has a maximum material thickness capacity of 4.5 mm and a stroke rate of 1000 strokes per minute. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for further details.
Hydraulic shearing machine manufactured in 2002. This HERA TS 2000x6 features a maximum sheet thickness of 6 mm and a cutting length of 2080 mm. It operates with a stroke rate of 18 strokes per minute and is powered by an 11 kW motor. If you are looking to get high-quality shearing capabilities, consider the HERA TS 2000x6 machine we have for sale. Contact us for further details.
This 3-axis Wenzel LH 65 was manufactured in 2018. It features a measuring range of 650 × 750 × 500 mm and includes a Renishaw PH6M probe head with a TP200 probe. The machine is equipped with online temperature compensation and active vibration damping for enhanced precision. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 65 CMM machine we have for sale. Contact us for further details.
Offer via gebr. Pipe cutting and chamfering machine Fabr. GF Type GF20 AVM with lifting table Specifications: Pipe outer diameter 283-508mm Wall thickness 1 - 15mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 50 - 163 rpm. Speed levels electronic 1 - 6 Power 1800 W
x-travel: 0 mm y-travel: 0 mm workpiece height: mm total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: 0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical injection moulding machine manufactured in 2016. This Battenfeld CM 40 features a machine weight of 5200 kg and a working height of 1000 mm. The machine is equipped with a robust safety system, ensuring operational safety. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld CM 40 machine we have for sale. Contact us for further details.
Offer via Gebr. Tube cutting machine Fabr. GF GEORG FISCHER Type RA12 Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed Speed levels electronic 1 - 6 Power 1600 W used, in good condition.
Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition
Arburg 520C-2000-675 (154) without funnel General information Item number: 154 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 240 g Clamping force: 2,000 kN Screw diameter: 45 mm Spray pressure: 2500 bar Spar spacing: 520 x 520 mm Clamping plate size: 715 x 715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 126766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Euromap: Yes Air valve: Yes
Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 2 units available, this machine offers reliable performance for your production needs. If you are looking to get high-quality plastic processing capabilities, consider the Krauss Maffei 35-180 CX machine we have for sale. Contact us for further details.
sheet thickness: 1.25 mm steel Roller center distance: 63 mm
Manufacturer TRUMPF Type L 3030 Year of construction 2005 Working range 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840D Laser power 2,700 watts Accuracy +/- 0.1 mm Equipment: Rotolas Closed machine frame PCS Automatic pallet changer Longitudinal conveyor belt for small parts/waste Laser Power Control Control Siemens: Open PC-based controller, simple operation, online help, diagnostic functions, maintenance hole book, technological data, teleservice Safety: Multi-beam photoelectric sensors, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust collector, protective cabin DIAS height control Automatic focus position adjustment AutoLas Plus Network connection (RJ45) by installation via teleservice The machine is in good condition. Location Germany, visit by appointment. Errors in the technical data and pri ...
Unused Turbovac Dip Tank - TV40/60 with air dryer The Turbovac dip tank and drying / cooling units offer you the ideal solution to complement your packaging line. Compared to vacuum pack / vacuum bags only. The Turbovac dip tank offers wrinkle-free transparency and significantly better product presentation. This is done by using heat and water to shrink the extra bag surrounding your product. Adding a drying unit will improve your packaging line and make it easier to label your product. Both machine types are designed to be integrated into the control of a vacuum packaging machine or alternatively they can operate independently. Manufacturer: Turbovac / Henkovac Type: TV40/60 Year: 2017, unused Material: Stainless steel Chassis dimensions (LXS) 570x400mm Immersion length 300 mm The maximum height of the product is 250mm Maximum water volume 70 liters Maximum product ...
AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...
grinding diameter: 5 - 255 mm grinding length: 300 mm centre height: 130 mm grinding length at plunge grinding: 50 mm control: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/min work piece spindle speed: 0 - 500 U/min feed of grinding spindle slide cross: 0 - 5000 mm/min table speeds: 0 - 5 m/min grinding wheel diameter: 450 mm total power requirement: 10 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Diosna Wendelkneter Type: W120 Carousel 4 stainless steel boilers with lifting tipper with control cabinet Carousel Painted
Used SANDER Type TH strapping machine for banding and securing packages. The machine is suitable for use in storage, packaging and shipping operations. Technical data: Bandbreite: 12 mm Tischgröße: ~ 900 x 590 mm Arbeitshöhe: ~ 760 mm Stromanschluss: 230 V Condition: Gebraucht Location: Tauberbischofsheim, Germany
An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement.
X-axis: 1600mm, y-axis: 1800mm, z-axis: 1000mm, max. workpiece weight: 3.5t, noise level: less than 70dBA, compressed air connection: 6-8bar, connected load: 2500VA, control: CALYPSO 7.6.08 software, length: 2940mm, width: 2450mm, height: 3800mm, weight: 8.5t, operating hours: 38,996h, with documentation. An on-site inspection is possible.
The Sodick AQ325L with the LN1W control is a high-precision CNC wire EDM (Submersible Wire EDM) machine specially designed for tool and mold making as well as for machining complex geometries in hardened or difficult-to-machine materials. A core feature of this series is the use of linear motors on the main axes (X and Y axis). In contrast to classic spindle drives, linear motors offer backlash-free, highly dynamic and wear-free power transmission, resulting in exceptional surface quality, high dimensional accuracy and minimal risk of wire breakage. Technical data (Sodick AQ325L / LN1W)Travel (axes)X-axis: 350 mmY-axis: 250 mmZ-axis: 220 mmU-axis: 80 mmV-axis: 80 mmMax. Konik angle: $\pm 20^\circ$ at 80 mm workpiece heightTable and workpieceClamping table (L x W): 600 x 400 mmDimensions work container (inside): approx. 895 x 650 mmMax. Workpiece weight (in submerged state): 300 kgMax. Wo ...
W&P Batch Kneader Type: UC 80 A with stainless steel boiler Stainless steel spiral Flour dust cover 2x automatic timers 2x speeds for max. 120 kg dough
- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Face disc - Lighting system - Coolant sealing Specification - Center width: 1000 mm - Circulating Ø over bed: 500 mm - Circulation Ø over slide: 325 mm - Orbital Ø in eruption: 630 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Transverse feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock pinole ...
Gemini Convert Chat to PDF Convert Chat to PDF Open this chat in Acrobat New chat Search chats Images Media library New Notebook Sodick AQ325L LN1W Specs LibreOffice NotebookBar: Ribbon Design Explained Synology NAS Access via Windows Explorer Stylevana Order: Important Notes Resale.de: Visibility, Email and Location Free Machine Multiposting Alternatives and ReSale: Differences Tax Changes Income Tax Summary Firewall blocks on Windows Server UniFi G6 Pro Entry RFID Support UniFi Access: Face, Code, RFID What is a proxy server? Xiaomi 15 Selfie Shutter Alternatives Grilling corn: raw or precooked? Candesartan: Tingling as a side effect Mailcow vs. Tobit David: A Comparison Customize the Home Assistant overview ioBroker SQL Adapter: Null Value Warnings Camera IP address and DHCP access Wise Manager: No video signal despite PTZ Find your camera on your new n ...
Vario - Snow removal blade Samasz PSV 301. Universally hydraulically adjustable blade – wedge plough or side clearer left-right use possible. Working width max./min. 303/262 cm, blade height 80/98 cm, rubber skirting strips, special equipment: training wheel set, plough lighting, electric 12 volt cable remote control for light and hydraulic control block. 1 hydraulic connection dw required. Weight approx. 480 kg. Almost new condition. Further snow removal blades, snow blowers and slingshots as well as spreading technology in stock - see also sample photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!
Subject: Maximum safety and ease of use for your dough divider Dear Ladies and Gentlemen, daily work with dough parts requires the highest level of safety without restricting efficiency in the production process. With our specially developed safety light curtain, we offer you a modern solution that combines reliable personal protection with practical ease of use. The system is mounted directly on the dough hopper and continuously monitors the danger area. If an intervention is detected, the machine stops immediately – an important measure to effectively prevent injuries. At the same time, the integrated muting function allows the baker to bring the dough into the hopper quickly and easily. This maintains the flow of work while ensuring safety at all times. Another advantage: All operating states are clearly visible at all times via a clearly visible signal light. Green sig ...
Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Durchlauföfen Herdwagenöfen Kammeröfen Schachtöfen Schmelzöfen Industrieöfen gebraucht Industrieöfen Neubauten Industrieöfen gebraucht Plasmanitrieranlagen Drehherdöfen Drehtrommelöfen Durchlauföfen Herdwagenöfen Induktionshärteanlagen Kammeröfen Ofenanlagen Schachtöfen Vakuumöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Härt en GlühenNormalisieren Weichglühen Isothermglühen Vergüten Anlassen Entspannen Hubschritt-Kettenförderofen Ringherdofen Kammerofen Durchstoßofen Drehherdofen Rollenherdofen Gußplattenbandofen Reinigungsanlagen
grinding diameter: 350,450 mm grinding length: 600 mm centre height: 175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Foto von bereits gelieferter Maschine m ...
Giana lathe mod. GFP14 - 710x 5300 - year 2007, control FAGOR GFP14
Kammerofen-Anlage für Aluminium Kammerofen-Anlage für Aluminium für den universellen Einsatz wird für die komplette Bandbreite des Aluminium-Glühens konzipiert. Kammerofen zum Glühen von Al-Folienbunden Bunde nach dem Glühen, temperaturgesteuert im fen abgekühlt. Bei Mehr-Kammeröfen und größeren Durchsätzen erfolgt die gesteuerte Abkühlung in einer hierfür vorgesehenen separaten Kammer. H erdwagenofen Rolleherdofen Kammero fen Drehtellerofen Wag enherdofen & Tunnelofen Haubenoen Schach tofen Sonderanlagen Leichtmetall-Folienbunde werden in 1 -Kammer- und Mehrkammeröfen, elektrisch und Gas beheizt, geglüht. Die Öfen werden mit Luftumwälzung versehen, die eine konvektive Erwärmung des empfindlichen Materials gewährleistet. Die Folienbunde werden so in Gestellen angeordnet, dass eine gleichmäßige Durchströmung des Nutzraumes gegeben ist. Die Gestelle werden mi ...
maximum number of results exceeded
please refine your search
