hell used for sale

Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.

Diesel filling station - service station - Hoftankstelle - Tankstelle 5,000 litres of content - new to the factory - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey  ...

Hello all We have the following spares for Wartsila 32 LN Cylinder heads 24 pieces used Connecting rods 12 pieces used Fuel pumps 12 used 1 piece new Pistons 12 pieces used 1 piece new Cylinder liners 12 pieces ueed camshaft pieces 12 pieces used injectors 12 pieces used All of them are dismantled from 2007 built Wartsila 32 LN engine with low running hours and are in really good condition We also have in our warehouse brand new consumable spares for Wartsila 32LN such as: exhaust and inlet valves, valve seats, guides, piston ring sets, main bearings, big end bearings , nozzles , cylinder head gasket sets, anti polishing rings and much more Please contact us at: infofin-marine

Roller crusher with 800 mm roller width and 800 mm roller diameter, incl. roller drives, auxiliary drives, switch box and hydraulics power pack for gap adjustment. In regularly maintained condition, rollers without ridges. Available at extra charge: Suitable dust filter by Hellmich.

Hello, I have a chipper for sale with a 6-cylinder John Deere engine, about 250 HP The chipper, despite its age and appearance, is fully operational. Its strong advantage is its very simple structure. It does not require a complicated service for simple repairs. The same applies to the operation, which is very intuitive. A chipper for a wide variety of needs: - Various types of wood waste - The cuts - Pallets - The bark - blocks, waste - and many others Capacity about 80 m3 / h depending on the material, operator efficiency, type of material and sieves It is possible to install different sizes of screens depending on the needs The wide charging with dimensions of 4.10m x 1.90m allows you to backfill even with very large loaders The working width of the roller is 1.45 m and the sieves have a mesh size of 8 cm x 8 cm. Chippers of this type and power, regardless of age, kee ...

Roller crusher with 800 mm roller width and 800 mm roller diameter, incl. main roller drives and auxiliary drives, manual gap adjustment. In regularly maintained condition, rollers without ridges. Available at extra charge: Suitable dust filter by Hellmich.

working length: 2451 mm Working width: 1670 mm Working height: 800-1000 mm Neue Haberkorn Rückfördereinrichtung nach Vierseitenhobelmaschine ------------------------------------------------------- Förderanlage für Holzlängen von 300 mm-4200 mm Pos.1 Längs-Quer-Länsförderer ca.2451 x 1670 mm - höheneinstellbare Stützböcke (ca.800 mm - 1000 mm) - stufenlos angetriebene Rollenbahn ca.5-25m/min, - Rollendurchm.50mm, 140mm Rollenmantellänge - Übergabe auf Querförderer durch Heben-Senken der Rollenbahn - Querförderer mit 6 Stck. Traversen - Förderbänder 50mm breit, in Kunststoffbahnen geführt - Antrieb ca.5-25m/min, 0,37 KW - ca.1250mm von Anschlag zu Anschlag - Übergabe als Hebesenkeinrichtung - angetriebene PVC beschichtete Stahlrollen, Durchm.50mm, 140mm Mantellänge - Antrieb ca.5-25m/min, 0,37 KW - Rollenabdeckung nach HBG Pos.2 Förderband ca.3000 x 260mm - höheneinst ...

Hello, I will sell a powerful chipper of the German brand Willibald SR 5000 The engine of the reputable company MAN - 460 hp. These engines are distinguished by cheaper operation compared to concretions Year 1998 The chipper is in almost perfect condition for its age. The chipper is very well maintained in technical terms, I add a lot of expensive parts to the machine as well as all the documentation to facilitate the service of the chipper. Its strong advantage is a very simple construction. It does not require complicated service for simple repairs. Very easy access to the engine and other components thanks to the lifted hatch. The same applies to the operation, which is highly intuitive. A chipper for a very diverse demand: - Various types of wood waste - Carps, Carps - Zrzyny - Pallets - blocks, waste - hay, straw (after changing knives) - and many others Efficiency  ...

Hello I will sell a powerful chipper of the American brand Rotochopper model MC-166 Engine from a reputable company CAT 3406 - 360 HP. The chipper, despite its age and appearance, is fully functional. Its strong advantage is a very simple construction. It does not require complicated service for simple repairs. The same applies to the operation, which is highly intuitive. Drum-knife chipper for very diverse needs: - Wood, whole logs. - Various types of wood waste - tree trunks, stumps -Cuts - Pallets (It has a magnetic roller that captures metal) - blocks, waste - and many others Capacity approx. 90 m3/h depending on material, operator efficiency, type of material and screens. It has a mounted magnetic wheel that will allow you to get rid of metal parts from the material. It is possible to install different sizes of sieves depending on the needs. The wide hopper ...

Product number: 2783 Type: Titaan 2-90 Serial number: HTN10220019 Year of construction: 2023 Chamber: 840 x 890 x 220 mm Seal bar: 2 x 840 mm Cycle: 30 - 50 sec Vacuum pump: Busch 300 m³/hr Compressed air: 6 Bar, 100 Nl/min Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2450 x 1100 x 1150 mm Weight: 850 kg Automatic lid and outfeed conveyors Hellings conveyor Type: 12980-10 Serial number: 790311 Year of construction: 2021 Belt width: 600 mm Length: 3000 mm Henkelman diptank Type: 200A Serial number: H0D20220008 Year of construction: 2022 Heating: electric Usable space: 575 x 1100 mm Emersion depth: 200 mm Cycle time: 22 sec Compressed air: 6 Bar, 50 l/min Power: 3 x 400V, 50Hz, 23kW Dimensions: 1200 x 2500 x 1350 mm Weight: 310 kg

Hello all We have in our stock in istanbul Turkey 2 x WARTSILA 8R32 CRANKSHAFTS, STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS Please contact us at : info@fin-marine for more info

Brewhouse 5/10 HL, professional brewing system, like new, built in mid-2020, as well as tanks, cooling, etc. We sell professional brewing system three-vessel brewhouse 5/10 HL, like new, manufacturer Labu, built in mid-2020, so far 53 brews, due to closure of operations MADE IN THE EU! Labu three-vessel brewhouse basic version 5/10 Hl, year of construction 2020, commissioning mid-2020, 53 brews so far, with chipper, electronic start timer, electronic liquid level indicator, automatic brewing ladle filling, integrated CIP cleaning, automatic dosing of the tail water, visualized remote monitoring, stainless steel platform, automatic shot feeder, storage container for shot feeder, pump, beer hoses and connections Price brewhouse EUR 85.000,00 excl. VAT Optionally, on-site training and subsequent supervision by a brewer can be offered. It is also possible to sell existing recip ...

Hello all We have just dismantled 1 Wartsila W8L32 main engine and we have the following spares available 8 pcs cylinder head covers reconditioned exhaust seats bores std. size 8 pcs Piston brand new condition 8 pcs Cyl. Liner brand new condition 8 pcs Water Jacket 8 pcs Connecting Rod 8 pcs Camshaft Pieces 1 piece Crankshaft standard 1 piece Engine Block 1 piece Coupling CENTAX 82 Engine driven pumps , Turning gear , Air cooler, Lube Oil cooler İf interested in anything please contact info@fin-marine.com best regards

Hello, I have to sell a punching machine finn power lp6 laser trwagon welman 2500

Hello - we have for sale an Ingersoll IG1000 Die sinking edm machine Table size 900x650 operating range X = 680 Y = 790 Z = 700 Maximum table load capacity = 2000kg

Hello all, We have in our stock in Istanbul Turkey 3 Wartsila W32 Cylinder head covers in almost brand new condition (slightly used) Standart exhaust seat bores, No cracks or wielding Water pressure tested With reports available Please contact us at info@fin-marine.com Regards

Hello all We have 8 X Wartsila 12V32 LN engines available Year of build is 2007 In very good condition Also all major parts are available such as: Pistons, Liners, Cylinder heads, Con rods, Crank shaft Please contact us at : info@fin-marine for more info

Hello, enclosed pictures of individual plans. Image numbering, dimensions see table: Image: (length x width 1 and (width 2, triangular formats) in meters) 1: 15 x 5 (0.30) 2: 33 x 5 3: see 1 4: 10 x 5 5: 15 x 3 (truck tarpaulin left and right 1.5 meters down) 6: 5 x 2.5 7: 7 x 2.5 8: 4 x 1 9: 1 x 25 meters 10: 4 x 2 (trailer tarpaulin left and right 1.5 down) 11: Convolent (partly damaged) without dimensions 12: 2 x 2 13: 17 x 1.5 14 without picture Tent Side length 4 x 10 meters Height 3 meters Various marquee tarpaulins, partly also truck tarpaulins Manufacturer, age, size, formats and condition unknown larger quantity available, see pictures cheap to hand in, depending on size, format and quantity

Hello, we have to bring a backup power generator, it stood in the factory as a reserve and has never been used, just for demonstration for us. Very good condition as new. The price is valid without transport, please call the given numbers for a quote. Some information: Meccalte generator 126 kVA Manufacturer: Meccalte Model: 126 kVA Year: 2017 Serial number: 0002006067 Meter setting: 10 M/h Weight (kg): 2300 Power: 126kVA CE marking: Yes Measure: Length (m): 2.3 m Width (m): 0.8 m Height (m): 1.6 m

Hello all we have 10 pcs Caterpillar 3512B gen sets available with control panels 1200 Kw - 50 Hz Year of build is 2008 aprox working hours: 12000-15000 Location: Far east Please contact info@fin-marine for information

Hello all We have in our stock in Turkey 1 unit Caterpillar 3516 containerised gas generator system İn good condition 1070 Kw in 1500 RPM please email us at infofin-marine fin-marine

Electronic module, control card UNI-PRO, HELLER D 23.020 013 ( D23.020013 ) CAM 24 V DC spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions: 262 x 186 x 15 mm

Hello, I will sell a hammer mill MMD5 - 37 kW. A very popular simple design that withstands motors up to 55 kW. The mill together with the screw feeder, which has a gear that regulates the speed, so you won't have to buy an inverter (unfortunately, without a motor). The feeder also has magnets to capture metals. Sometimes it is worth having it in stock, all complete, because downtime costs more than such a mill. Feel free to contact me.

Hydraulic power pack with tank, universal power pack HYDRAULIK-RING PVS12EH140C1 pd: max. 140 bar Vg: 12 dm3/min ( 12 l/min ) n: max. 1800 rpm Engine: SIEMENS ( without nameplate ) Tank: approx. 100 l spare part and a. for machining center HELLER BEA 05 DC used, tested ! Dimensions: 800 x 380 x 800 mm

encapsulated length measuring device, length measuring system HEIDENHAIN LS 703 216 750 A4 measuring length: 470 mm ( ML 470 mm ) sampling unit: AE LS 703 approx. 0,3 m connection cable with 9-pin socket approx. 1.5 m connection cable with 9-pin plug spare part for HELLER BEA 05 DC used, tested ! Dimensions ( without cable ): 620 x 80 x 46 mm

encapsulated length measuring device, length measuring system HEIDENHAIN LS 703 216 750 A3 measuring length: 620 mm ( ML 620 mm ) sampling unit: AE LS 703 approx. 0,0,3 m connection cable with 9-pin socket approx. 1.4 m connection cable with 9-pin plug spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions ( without cable ): 770 x 80 x 46 mm

encapsulated length measuring device, length measuring system HEIDENHAIN LS 703 216 750 measuring length: 720 mm ( ML 720 mm ) sampling unit: AE LS 703 approx. 0,3 m connection cable with 9-pin socket approx. 1.4 m connection cable with 9-pin plug spare part for HELLER BEA 05 DC used, tested ! Dimensions ( without cable ): 870 x 80 x 46 mm

Diffuse reflection sensor, diffuse reflection sensor LEUZE ELECTRONIC BRK 736/4-180 805016 24 V DC approx. 0.45 m connection cable spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions ( sensor without cable ): 100 x 22 x 55 mm

Electronic module, control card UNI-PRO, HELLER D 23.030 766 ( D23.030766 ) MAZ 24 V DC Ersatzteil u.a. für Machinzentrum HELLER BEA 05 DC used, tested ! Dimensions: 262 x 186 x 15 mm

Mains choke, Three-phase choke, 3-phase choke, Rotary throttle TRAMAG DR3-38-4-0100 1900-7471 82 A 380 V 3AC 50 Hz IP00 Ersatzteil u.a. for machining center HELLER BEA 05 DC used, tested ! Dimensions ( mains choke ): 225 x 125 x 200 mm Dimensions ( with cover ): 280 x 240 x 220 mm

Frequency converter, inverter HEYNAU ANTRIEBSTECHNIK SM806DC/250-30 Power supply: 3x 27 V Control supply: : 2x 18 V Power output: : 30 V 10 A IP00 spare part and spare part a. for machining center HELLER BEA 05 DC used, tested ! Dimensions: 250 x 200 x 300 mm

Electronic module, control board UNI-PRO, HELLER C 23.020 036 ( C23.020036 ) CUS 24 V DC spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions: 262 x 186 x 15 mm

Transformer, transformer BÜRKLE+SCHÖCK CY 4053 0,25 kVA Primary: 360 - 400 V 1 AC, 0.72 A 50 / 60 Hz Secondary: 220 V AC, 1.13 A spare part for HELLER BEA 05 DC used, checked! Dimensions: 120 x 120 x 155 mm

Electronic module, control card UNI-PRO, HELLER F 23.032 301 ( F23.032301 ) MUB 24 V DC spare part for HELLER BEA 05 DC used, tested ! Dimensions: 262 x 186 x 15 mm

Transformer, transformer, with rectifier BÜRKLE+SCHÖCK DYG 3041 0,49 kVA Primary: 380 V 3AC, 0.82 A 50 / 60 Hz Secondary: 24 / 26 / 28 V 3AC, 15 A Rectifier: HERRMANN DB 30/36 - 15 RT output ( DC voltage ): 24 / 26 / 28 V DC, 15 A spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions (transformer only): 180 x 130 x 220 mm Dimensions ( with rectifier ): 230 x 180 x 220 mm

Switching Power Supply, Power Supply UNI-PRO, Heller SNT 5V 30A 23.035336/004 Input: 187 - 242 V 1AC 50 - 60 Hz Output: 5 V DC 30 A used, tested ! Dimensions: 190 x 115 x 275 mm

Electronic module, control card UNI-PRO, HELLER H 23.020 017 ( H23.020017 ) AXE 24 V DC Spare part for HELLER BEA 05 DC used, tested ! Dimensions: 262 x 186 x 15 mm

Electronic Module, Input Module HELLER, UNI-PRO B 23.032 245-000 ( B23.032245-000 ) 24V DC-Input connection strip: B 23.020 003-000 ( B23.020003-000 ) 24 V DC spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions: 262 x 193 x 51 mm

Electronic module, control card UNI-PRO, HELLER C 23.040 220 ( C23.040220 ) CPU 24 V DC spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions: 262 x 186 x 15 mm

Electronic module, output module HELLER, UNI-PRO A 23.029 016-000 ( A23.029016-000 ) Connector strip: A 23.020 004-000 ( A23.020004-000 ) 24 V DC spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions: 262 x 193 x 51 mm

Electronic module, control card UNI-PRO, HELLER E 23.032 301 ( E23.032301 ) MUB 24 V DC spare part for HELLER BEA 05 DC used, tested ! Dimensions: 262 x 186 x 15 mm

Electronic module, output module HELLER, UNI-PRO A 23.029 016-000 ( A23.029016-000 ) Connector strip: A 23.020 005-000 ( A23.020005-000 ) 24 V DC spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions: 262 x 193 x 51 mm

Electronic module, control card UNI-PRO, HELLER E 23.032 284 ( E23.032284 ) AXEL 24 V DC spare part for HELLER BEA 05 DC used, tested ! Dimensions: 262 x 186 x 15 mm

Electronic module, control card HELLER, UNI-PRO B 23.032 302-000 ( B23.032302-000 ) MUB 24 V DC spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions: 262 x 186 x 15 mm

Electronic module, control board UNI-PRO, HELLER C 23.040 222 ( C23.040222 ) CPU 24 V DC spare part for HELLER BEA 05 DC used, tested ! Dimensions: 262 x 186 x 15 mm

Electronic module, control card HELLER, UNI-PRO C 23.032 282-000 ( C23.032282-000 ) CPU 24 V DC spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions: 262 x 186 x 15 mm

Electronic module, control card UNI-PRO, HELLER C 23.032 299 ( C23.032299 ) MAD 24 V DC spare part for HELLER BEA 05 DC used, tested ! Dimensions: 262 x 186 x 15 mm

Electronic module, control card HELLER, UNI-PRO D 23.030 767-000 ( D23.030767-000 ) CET 24 V DC spare part for HELLER BEA 05 DC used, tested ! Dimensions: 262 x 186 x 15 mm

Electronic module, control card UNI-PRO, HELLER F 23.020 017X ( F23.020017X ) AXE-sens 24 V DC spare part for HELLER BEA 05 DC used, tested ! Dimensions: 262 x 186 x 15 mm

Electronic module, control card HELLER, UNI-PRO D 23.032 304-000 ( D23.032304-000 ) SBUS 24 V DC spare part for machining center HELLER BEA 05 DC used, tested ! Dimensions: 262 x 186 x 15 mm