hel europe used for sale

Bevel gearbox, KS35FH 17,5:1 13R Sa.S29, Grässner, mint condition -60% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! Current new price approx. € 8,600 excluding VAT The gearbox was purchased from a company's spare parts warehouse, has only minor signs of storage, has never been used and is completely new. Bevel gearbox, KS35FH 17.5:1 13R Sa.S29, Grässner, as good as new -60% 1235FH000051, I=17.5:1 including flange B5-VK142/165/130 F7 and hollow shaft d1=24x53 Gearbox with reduced backlash Angle of rotation on shaft d2 (without load) less than 5 angular minutes Output shaft d2 extended for shrink disc connectnio Installation position: All shafts horizontal 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer,  ...

Transnorm spiral helix belt curve conveyor left 90°-1300-1100 IR900 - Showroom machine RA2319 Technical data: Frame width (NB): 1300 mm,1450 mm with Motor belt width (GuB): 1100 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 500 mm / 90° = 2000 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,8 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2020 Incl. supports, current height from 300mm to 800mm Optionally available: adjustable up and down with frequency converter Supports, if deviating from the currently installed Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guides Driven: Y ...

Pneumatic unit FESTO PEV-1/4-B-0D 175250 HEL-D-MIDI 165080 FRM-H-D-MIDI 170688 Dimensions: 180 x 140 x 55 mm

44 litre, Stock number: D986, Litre: 44, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: W 450 x D 320 x H 315 mm., Outer dimensions: W 650 x D 490 x H 460 mm., Temperature: 3 heat stages. , Power: 220 Volt - 140 W., Shelf: 2 pcs, Manufacturer: Helios, Model/type: 28311

450 litre, Stock number: T3630, Litre: 450, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 2 pcs. legs, Top: Closed, Bottom: Conical, Tank cover: In the top, Inner diameter: Ø 1000 mm., Dimensions: B 1150 x H 1550 mm., Manufacturer: Helsted Maskinfabrik, Year: 1975

10.000 litre, Stock number: T3148, Litre: 10.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, closed, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fiber, Tank cover: In the side, Agitator: Flange for agitator in the side, CIP: Yes, Inner diameter: Ø 2020 mm., Outer diameter: D 2200 mm., Total height: H 4250 mm., Manufacturer: Helsted, Year: 1975

Manually operated with roof duct Auction-ID: A1-41278-354

600 litre, Stock number: T2048, Litre: 600, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Transportation tank, Standing: 4 pcs. of legs, Top: Conical, Bottom: Conical, Tank cover: In the top, Ø 425 mm., Inner diameter: Ø 940 mm., Total height: H 1500 mm., Manufacturer: Helsted, Other: Stacking bracket at the top

Auction-ID: A1-48386-129

In different versions with various Auction-ID: A1-48414-252

Measuring machine with hand-held measuring arm STIEFELMAYERhigh-precision measuring and marking plate cast steel-grey cast iron strongly ribbedMasch. No. 22890285 year of construction 1985Length 2500 mmWidth 1500 mmThickness 350 mmPanel thickness (top) 50 mm Solid material with 300 mm ribsWorking height approx. 800 mm- manually movable with measuring arm, measuring range X=1970 mm, Y = 815 mm, Z = 840 mm- with 3-axis digital display Grundig MZ 1030- 5 pieces height-adjustable feetSpace requirement L x W x H 2500 x 1500 x 2500 mmWeight 3000 kgvery good surface;

Measuring machine with hand-held measuring arm STIEFELMAYERMess and marking plates cast steel-grey cast iron strongly ribbedHigh-precision measuring plate with good surfaceYear of construction 1985Length 2000 mmWidth 1500 mmThickness 350 mmPanel thickness (top) 50 mm Solid material with 300 mm ribsWorking height approx. 800 mm- manually movable with measuring arm, measuring range X=1490 mm, Y = 1000 mm, Z = 1250 mm- with 3-axis digital display Grundig MZ 1030- machined side surface at 90 angles to the table surface, 2000 x 350 mm - 5 pieces of height-adjustable feetSpace required

Transnorm belt curve conveyor 90° helix spiral left 980-800 IR600 RA2044 Technical data Manufacturer: Transnorm Type: Belt curve 90° left Year of manufacture: 1995 angle: 90 running direction: left inner radius (IR): 600 mm useful width (NUB): 800 mm nominal/external width (NB): 980 mm Pitch: 180 mm/ 90°, 720 mm/ 360° Conveying speed (m/s): with frequency converter freely adjustable between 0.0117 and 0.5167Electrical data: 1.5 kW / S1, 380-500 V Scope of delivery: without supports and side guides (please inquire if required) including frequency converter new belt optional: supports side guides Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: condition: very good (used) scope of delivery: including Movimot frequency converter, inklusive neuem Gurt, without supports and side guides Driven: YES Nominal / inner radius in mm: 600 angle: 90° Belt width in mm: ...

Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising ...

UNUSESD - Power: 75 kW - Voltage: 230 / 400V. - Amperage: 240 / 137A. - Hertz: 50 Hz. - Ratio: 8,26:1 - RPM in/out: 1.480/179 RPM - Shaft ø out: 110 mm - Weight: 887 / 952 KG

Transnorm spiral helix belt curve conveyor right 90°-750-650 IR1200 RA2437 Technical data: Frame width (NB): 750 mm belt width (GuB): 650 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 200 mm / 90° = 800 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,35-1,21 Drive: SEW gear motor with movi-mot frequency converter for stepless speedcontroll Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive angle: 90° scope of delivery: including Movimot frequency converter KW: 0,55/S1 Construction year: 2001 B ...

2.000 litre, Stock number: T1467, Litre: 2.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Konisk, Bottom: Konisk, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Agitator: Yes, Agitator type: Anchor agitator from the top, Flange for agitator in the side, Motor: 0,75 kW - 27 rpm., Inner diameter: Ø 1750 mm., Outer diameter: D 1900 mm., Total height: H 2650 mm., Manufacturer: Helsted Ificon

Hand-held tools, brooms, shovels, etc., fuel canisters, 20 l, etc., remaining contents of the container

Hand-held circular saw HILTI WSC 55 built in 2000, S/N 325033, 1,100 W, case, inv. no. 96040

Hand-held circular saw MAKITA 4157KB

Hand sweeper GÜDE GKM 700, S/N 73442-2005-675, year 2020, 1 brush

Hand sweeper GÜDE GKM 700, S/N 73442-2005-025, YOC 2020, 1 brush

Hand sweeper GÜDE GKM 700, S/N 73442-2005-006 Year 2020, 1 brush

Hand sweeper GÜDE GKM 700, S/N 73442-2005-662, YOC 2020, 1 brush

Hand sweeper GÜDE GKM 700, S/N 73442-2005-657, YOC 2020, 1 brush

FESTOOL hand-held circular saw, incl. case, accessories see pictures, without pallet and pallet trolley. Auction-ID: A1-48301-6

Working range : X = 400mm,Y = 250mm, Z = 580mm Auction-ID: A1-48232-6

Working range : X = 400mm,Y = 250mm, Z = 580mm Auction-ID: A1-48232-7

Power: 110 kW Voltage: 400/690 V Current: 186/107 A Speed: 2983 rpm Power Factor: 0.89 Auction-ID: A1-47745-142

Handheld equipment such as shovels and brooms, etc.

Manufacturer part number : 713220008AAV Product description: Helyo Card Code date : 20/09/2021 Revision: AAV Quantity: 420 units Lighting: Integrated horticultural LED Additional information: Connected grow light for indoor growing Auction-ID: A1-48429-33

Used Tetra Pak helix accumulator 44 meters year 2018 Model: ACHX10-0400-44 | Manufacturer: Tetra Pak® | Year: 2018 | Machine type: Accumulator | Accumulation length: 44 m helix | Container types: Brik | Condition: in storage. This helical accumulator manages buffer capacity on aseptic carton lines, stabilizing the flow of Brik containers between upstream and downstream units and supporting continuous operation. Category: Various Equipment Primary function: temporary storage and flow compensation Line scope: aseptic packaging for brick-type carton containers Technical and Functional Features The ACHX10-0400-44 accumulates containers on a 44-meter helical path to absorb fluctuations between machines. By buffering surges and shortages, it reduces stoppages, maintains a continuous container stream, and helps safeguard the structural integrity of Brik cartons during pauses or restarts. The h ...

Used Tetra Pak Helix Accumulator 47 Meters Year 2010 The Used Tetra Pak Helix Accumulator 47 meters year 2010 optimizes container flow in high capacity bottling lines. Specifically, it balances the production line efficiently, ensuring constant movement between different machines. As a result, it reduces downtime and increases overall plant productivity. Moreover, it enhances operational consistency, which improves overall efficiency. Tetra Pak, a global leader in bottling and packaging solutions, manufactured this model ACHX 30 to provide robustness and reliability. Notably, its helical structure compacts and efficiently accumulates containers while minimizing space usage. Furthermore, with a length of 47 meters, it manages large volumes of containers, ensuring a continuous flow even during format changes or maintenance operations upstream or downstream of the line. Therefore, it guaran ...

Coin Set Czechoslovakia 1992 1 Heller - 5 Kronen + 10 Kronen Razin, st, total 18.88 Kroner

Coin Set Czech Republic 1993 1 Heller - 50 Crowns, st, total 88.80 CZK

Coin Set Czechoslovakia 1991 1 Heller - 5 Crowns + 10 Crowns Masaryk, st, total 18.88 Crowns

Coin Set Slovakia 2004 50 Heller - 10 Kronen, with pre-Euro issues 1 ct - 2 Euro, st, total 3.88 Euro

Coin Set Slovakia Geijza Dusik 2007 50 Heller - 10 CZK st, total 18.50 CZK, CD

KMS Slovakia XXIX Olympiad Beijing 2008 50 Heller - 10 Crowns, total 18.50 Crowns, st

Circulation coins Czechoslovakia from 1921 3x 5 Heller 1927-1938, 5x 10 Heller 1927-1938, 3x 20 Heller 1921-1924, 4x 25 Heller 1933, 3x 50 Heller 1922-1927, 6x 1 Krone 1922-1924, 1 H - 1 Krone 1953, 3x 1 Krone 1957-1959, 1x 2 Kronen 1948, Bohemia and Moravia & Cechy a Morava 1 Krone 1933, 10 Heller, Slovakia 2x 50 Heller 1941 1943, total approx. 38 pieces

Circulation coins Czechoslovakia 1x 10 Heller 1932, 1x 3 Heller, 4x 5 Heller, 40x 10 Heller, 18x 20 Heller, 22x 50 Heller, 36x 1 Crown, 13x 2 Crowns, 6x 3 Crowns, 7x 5 Crowns, total 147 pieces

Circulation coins Slovakia 1x 10 Heller, 3x 20 Heller, 4x 50 Heller, 5x 1 Crown, 2x 2 Crowns, total 15 pieces 16.70 Sk

Circulation coin Frankfurt am Main 1 Heller 1820, AKS30, Jaeg6 10, KM301

Circulation coin Hesse-Kassel 1 Heller 1741, KM401

Circulation coin Hesse-Kassel 1 Schmalkalden Heller 1744, KM7

Circulation coins Hesse-Kassel 2x I Heller, monogram Karl 1725-1730, KM393

Circulation coins Hesse-Kassel I and II Heller, monogram Wilhelm VIII

Medal 100th Anniversary of the Death of Helena Blavatsky 1991, Case

KMS Slovakia XXIX Olympiad Beijing 2008 50 Heller - 10 Crowns, total 18.50 Crowns, st

Serial Number: 707 061755 Year of Make: 2017 Auction-ID: A1-48540-825