135,381 used machines on RESALE, but how to find them? Machine Search
Measuring machine with hand-held measuring arm STIEFELMAYERhigh-precision measuring and marking plate cast steel-grey cast iron strongly ribbedMasch. No. 22890285 year of construction 1985Length 2500 mmWidth 1500 mmThickness 350 mmPanel thickness (top) 50 mm Solid material with 300 mm ribsWorking height approx. 800 mm- manually movable with measuring arm, measuring range X=1970 mm, Y = 815 mm, Z = 840 mm- with 3-axis digital display Grundig MZ 1030- 5 pieces height-adjustable feetSpace requirement L x W x H 2500 x 1500 x 2500 mmWeight 3000 kgvery good surface;
Measuring machine with hand-held measuring arm STIEFELMAYERMess and marking plates cast steel-grey cast iron strongly ribbedHigh-precision measuring plate with good surfaceYear of construction 1985Length 2000 mmWidth 1500 mmThickness 350 mmPanel thickness (top) 50 mm Solid material with 300 mm ribsWorking height approx. 800 mm- manually movable with measuring arm, measuring range X=1490 mm, Y = 1000 mm, Z = 1250 mm- with 3-axis digital display Grundig MZ 1030- machined side surface at 90 angles to the table surface, 2000 x 350 mm - 5 pieces of height-adjustable feetSpace required
Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising ...
UNUSESD - Power: 75 kW - Voltage: 230 / 400V. - Amperage: 240 / 137A. - Hertz: 50 Hz. - Ratio: 8,26:1 - RPM in/out: 1.480/179 RPM - Shaft ø out: 110 mm - Weight: 887 / 952 KG
Transnorm spiral helix belt curve conveyor right 90°-750-650 IR1200 RA2437 Technical data: Frame width (NB): 750 mm belt width (GuB): 650 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 200 mm / 90° = 800 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,35-1,21 Drive: SEW gear motor with movi-mot frequency converter for stepless speedcontroll Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive angle: 90° scope of delivery: including Movimot frequency converter KW: 0,55/S1 Construction year: 2001 B ...
2.000 litre, Stock number: T1467, Litre: 2.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Konisk, Bottom: Konisk, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Agitator: Yes, Agitator type: Anchor agitator from the top - Flange for agitator in the side, Motor: 0,75 kW - 27 rpm., Inner diameter: Ø 1750 mm, Outer diameter: D 1900 mm, Total height: H 2650 mm, Manufacturer: Helsted
Used Tetra Pak helix accumulator 44 meters year 2018 Model: ACHX10-0400-44 | Manufacturer: Tetra Pak® | Year: 2018 | Machine type: Accumulator | Accumulation length: 44 m helix | Container types: Brik | Condition: in storage. This helical accumulator provides buffered storage on aseptic carton lines, stabilizing Brik container flow between upstream and downstream units to sustain continuous operation. Category: Various Equipment Primary function: temporary storage and flow compensation Line scope: aseptic packaging for brick-type carton containers Technical and Functional Features The ACHX10-0400-44 builds buffer capacity over a 44-meter helical path to absorb short-term imbalances between machines. By damping surges and shortages, it reduces stoppages, maintains a stable container stream, and protects the structural integrity of Brik cartons during pauses, ramp-ups, or restarts. The he ...
Used Tetra Pak Helix Accumulator 47 Meters Year 2010 The Used Tetra Pak Helix Accumulator 47 meters year 2010 optimizes container flow in high capacity bottling lines. Specifically, it balances the production line efficiently, ensuring constant movement between different machines. As a result, it reduces downtime and increases overall plant productivity. Moreover, it enhances operational consistency, which improves overall efficiency. Tetra Pak, a global leader in bottling and packaging solutions, manufactured this model ACHX 30 to provide robustness and reliability. Notably, its helical structure compacts and efficiently accumulates containers while minimizing space usage. Furthermore, with a length of 47 meters, it manages large volumes of containers, ensuring a continuous flow even during format changes or maintenance operations upstream or downstream of the line. Therefore, it guaran ...
consisting of a grinder, drills, grinders, milling cutters, with pneumatic hoses different manufacturers Auction-ID: A7-49089-131
According to photos, weight 10kg Auction-ID: A1-48554-125
Hours: 01940,02 Power supply: 400 V, 3-phase, 50/60 Hz Largest Heater Load: 14.5 A Short Circuit Interrupting Capacity: 5,000 A CE marking Technical data: The 1707 MKIII has 7 upper and 7 lower heating zones with hot air convection. The heated process section is approximately 1.85 m, and the maximum process temperature is 350 °C. As standard, printed circuit boards can be processed approximately 50-460 mm wide; the maximum transport speed is about 1.88 m/min. Please note: Lot 2 and lot 51-56 are sold only with reservations. The seller still has to confirm the bid Lot 2: the complete processing line. There you will also find a video on the individual process steps and machines Lot 51-56 Machining line items. These are the same parts as Lot 2. Either lot 2 OR lot 51 lot 56 is sold Auction-ID: A7-49596-55
equipped with Heidenhain readout, DELL keyboard (is broken), Philips monitor, various cables Auction-ID: A1-48552-43
Used Tetra Pak TBA 8 V100 1000ml slim, helicap 23Technical Specifications & Performance DataThis second hand Tetra Pak complete aseptic carton filling line is configured for dairy production in slim 1.0L Brik carton packages. The core of the line is a Tetra Pak TBA 8 V100 filling machine, manufactured approximately in 1995 and showing approximately 26,000 working hours. A total refurbishment was completed in 2026, followed by a test run and inspection.Main filling machine: Tetra Pak TBA 8 V100Package format: Slim 1.0L aseptic carton packageSpeed: 6.000 TP/hProduct application: Dairy productionYear of manufacture: approximately 1995Working hours: approximately 26,000 hRefurbishment: total refurbishment in 2026Advanced Automation & Control SystemsThe line is supplied as an integrated industrial packaging solution comprising filling, cap application, conveyor handling and wrap-around tray p ...
Used Tetra Pak TBA8 1000ml square V110, Helicap 27Technical Specifications & Performance DataThis used bottling line is configured around a Tetra Pak TBA 8 V110 filling machine for square 1.0L Brik carton packs. Manufactured approximately in 2001, the filling machine has approximately 26,000 working hours and received a total refurbishment in 2026. The line includes dedicated screw-cap application, wrap-around tray packing and interconnecting conveyor equipment for an integrated carton packaging process.Filling machine: Tetra Pak TBA 8 V110Pack format: square Brik carton, 1.0LYear of manufacture: approximately 2001Working hours: approximately 26,000 hRefurbishment: total refurbishment in 2026Conveyors: approximately 30 metres, according to the standard layoutAdvanced Automation & Control SystemsThe line combines filling, cap application, conveying and tray packing into a coordinated indu ...
- Multi-process welding equipment for MIG/MAG, TIG and stick electrode (MMA) processes. - Three-phase power supply 400 V. - Maximum welding current 500 A. - Driving factor: 500 A at 40%, 410 A at 60%, and 320 A at 100%. - HELVI TH4W wire feeder. - Refrigeration unit. - Equipment mounted on wheeled cart. - Operating conditions of this item: unchecked. Auction-ID: A7-48839-62
- Multi-process welding equipment for MIG/MAG, TIG and stick electrode (MMA) processes. - Three-phase power supply 400 V. - Maximum welding current 500 A. - Driving factor: 500 A at 40%, 410 A at 60%, and 320 A at 100%. - HELVI TH4W wire feeder. - Refrigeration unit. - Equipment mounted on wheeled cart. - Operating conditions of this item: unchecked. Auction-ID: A7-48839-36
Automatic wave saw Saw blade 315mm max. shaft diameter 90mm Speeds 9 - 45 rpm Motor 3.0KW See pictures Condition: unchecked (6) Auction-ID: A7-49782-567
- Multi-process welding equipment for MIG/MAG, TIG and stick electrode (MMA) processes. - Three-phase power supply 230/400 V. - Maximum welding current 400 A. - Driving factor: 400 A at 35%, 305 A at 60%, and 240 A at 100%. - HELVI BOX HF wire feeder. - Refrigeration unit. - Equipment mounted on wheeled cart. - Operating conditions of this item: unchecked. Auction-ID: A7-48839-51
Serial number: 080107J1135 Load capacity: 1000 kg Load centre distance: 600 mm Fork length: 1200 mm Lifting height: up to 3500 mm Reference: SZ - Lot 9 Auction-ID: A7-49056-197
Remarks The article comes from a company liquidation and was actively used in production until the plant closed. Auction-ID: A7-49302-141
maximum number of results exceeded
please refine your search
30 € 
