hel europe used for sale

This 4-axis HELLER MCH 250 was manufactured in 2007. It features a spindle speed of 6000 rpm and a BT50 tool holder. The machine is equipped with an automatic tool changer that holds 100 tools, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details.

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Belt width: 655 mm, Transport length: 1500 mm, Power: 3 x 400V, 50Hz, 0.37kW, Dimensions: 1500 x 1250 x 1450 mm

Manufacturer:Heller Model: H6000 Type of machine: CNC Machining Center Year of manufacture: 2015 Control: Siemens 840D sl Axis travel: XYZB 1000/1000/1000/360x0.001 degrees Spindle: HSK100, 8000 rpm, 43kW Tool magazine: 265 positions Pallet system: Fastems pallet system with 20 pallet spaces Voltage: 3~ 400V Frequency: 50Hz Nominal current: 72A Short circuit current rating: 9kA Condition: Very Good Find more here - / Contact us at -

Used Capping Machine Tetra Pak Helicap 23 6000 bph The used capping machine Tetra Pak Helicap 23 6000 bph applies plastic screw caps to carton packages. Specifically, Tetra Pak manufactured this model in 2007 and configured it for the 1000 Slim format. The Slim format, which is widely used, has a rectangular profile and a reduced cross-section. As a result, it optimizes liquid packaging by improving shelf stability and reducing material consumption. Technical Specifications of the Used Capping Machine Tetra Pak The Helicap 23 model applies the CAP 47 screw cap, which ensures a hermetic seal and allows easy opening for the consumer. Moreover, the screwing system maintains a consistent torque so that leaks or packaging defects do not occur. The Used Capping Machine Tetra Pak Helicap 23 6000 bph operates with a 400/230 VAC power supply, meaning that it supports both industrial three-phase n ...

Used Tetra Pak HELIX 30 accumulator year 2018 Accumulation and Flow Management The Tetra Pak HELIX 30 from 2018 optimizes the accumulation and flow of production lines with advanced technology. Moreover, this machine handles large quantities of packaging efficiently and ensures operational continuity during slowdowns or stops in subsequent stages of the production line. Technical Specifications of the Tetra Pak HELIX 30 The machine, identified as H236-ACHX, processes the 200S format with exceptional versatility for industrial applications. Furthermore, Tetra Pak’s Helix technology facilitates smooth and uninterrupted accumulation, reducing the risk of container damage and enhancing productivity. Consequently, the model achieves a nominal capacity of 44M, making it highly effective for high-speed production lines. Innovation in Container Accumulation in the Tetra Pak Helix 30 The Tetra  ...

It utilizes Near-Infrared (NIR) sensors, used in automated recycling and waste management facilities to identify and sort plastics. Note the camera needs to be replaced. The machine cant run without it. 1. General Specifications - Minimum Grain/Particle Size: 15 mm - Maximum Grain/Particle Size: 220 mm - Weight Distribution of Sorted Material: - 35 g per piece (making up 25% of the volume) - 50 g per piece (making up 75% of the volume) - Total Machine Weight: 1,650 kg 2. Electrical & Power Requirements - Electrical Connection: 380–440 VAC, 3-Phase, 50/60 Hz - Connected Load / Power Consumption: 10 kW 3. Optical & Scanning System (Light Bridge) - Resolution: 240 Pixels - Scanning Width: 1,000 mm (1 meter) - Clear Height above Belt: Approx. 250 mm 4. Pneumatic Ejection System (Nozzle Bar) - Valves with Nozzles: 62 - Nozzle Pitch / Distance: 15.5 mm - Maximum Pressure: 10 bar - O ...

x-travel:630 mm y-travel:630 mm z-travel:630 mm control:Unipro 90 Pallet changer 2x:400 x 500 workpiece - installed height:800 mm max. clampable workpiece diameter:720 - 850 mm spindle taper::SK 40 spindle turning speed - stepless:10 - 8000 1/min Spindle power:20 / 30 kW Spindle Torque:95/143 Nm tool magazin::80 SK 40 total power requirement:55 kW weight of the machine ca.:11 t Machine with Unipro 90 control for 5 axis - twin palette changer - tool magazine 80 HSK-A 63 - coolant device with coolant through spindle 7 pressure levels - full A & B-axis - chip conveyor

x-travel:1000 mm y-travel:800 mm z-travel:1100 mm weight of the machine ca.:20 t dimensions of the machine ca.:6,80 x 3,0 x 3,20 m Tool bore:SK50 Tool taper:HSK-A 100 turning speed range:45-6.000 U/min size of pallet:630x800 mm change time of pallets:21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

x-travel:1000 mm y-travel:800 mm z-travel:1100 mm weight of the machine ca.:15,2 t Tool bore:SK50 Tool taper:HSK-A 100 turning speed range:45-6.000 U/min size of pallet:630x800 mm change time of pallets:21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

x-travel:450 mm y-travel:450 mm z-travel:450 mm weight of the machine ca.:14 t size of pallet:320 x 320 mm number of spindles:2 Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 ba ...

x-travel:2200 mm y-travel:2200 mm z-travel:1400 mm spindle taper ISO:50 spindle diameter in front bearing:110 mm spindle turning speed range:45 - 6000 U/min pallet table size:1000 x 1250 mm pallet worktable capacity:6000 kg feed range:1 - 60000 rapid traverse:60 m/min spindle drive motor:27 kW dimensions of the machine ca.:15 x 8,5 x 5,7 m total power requirement:133 kVA weight of the machine ca.:50 t Machine with SIEMENS 840 D control - full B-axis - palette changer for 3 palettes - tool changer for 244 tools - coolant through spindle - max. workpiece swing 2200 mm

x-travel:630 mm y-travel:630 mm z-travel:630 mm pallet size::400 x 500 mm spindle taper::HSK 63 spindle turning speed - stepless:10 - 16000 U/min total power requirement:55 kW weight of the machine ca.:11 t Machine with SIEMENS 840 D control for 4 axis - digital drives - palette changer 4-fold - tool changer 160-fold - coolant device with coolant through spindle - full B-axis - chip conveyor - hydr. workpiece clamping

Ladies and gentlemen, we are able to offer you a working bank in Europa. If you are interested, please send us your specification and wishes. With kind regards Trade & translations

Card holder for Eurocard, screw terminal -Connection type: 4 mm² solid wire -Mounting type: snap-on to mounting rail (EN 60715) or screw-on -Quantity: 6 available -Price: per piece -Dimensions: 137/60/H160 mm -Weight: 0.24 kg

Auction-ID: A1-41278-502

Auction-ID: A1-41278-518

Set of 20 children's tool boxes consisting of 10 wooden elements and storage, CE standard. Auction-ID: A1-47256-335

Set of 20 children's tool boxes consisting of 10 wooden elements and storage, CE standard. Auction-ID: A1-47256-338

Set of 20 children's tool boxes consisting of 10 wooden elements and storage, CE standard. Auction-ID: A1-47256-336

Set of 20 children's tool boxes consisting of 10 wooden elements and storage, CE standard. Auction-ID: A1-47256-337

Set of 96 children's tool boxes consisting of 10 wooden elements and CE standard storage. Auction-ID: A1-47256-142

Set of 24 children's tool boxes consisting of 10 wooden elements and storage, CE standard Auction-ID: A1-47256-128

Set of 96 children's tool boxes consisting of 10 wooden elements and storage, CE standard. Auction-ID: A1-47256-136

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48339-67

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48339-297

Auction-ID: A1-47378-305

Auction-ID: A1-47378-304

Auction-ID: A1-47378-263

Silver coin Federal Republic of Germany 5 DM European Year of Monument Protection 1975 unc Silver .625 11.2 gr rough weight, KM138

Silver coin Federal Republic of Germany 5 DM European Year of Monument Protection 1975 unc Silver .625 11.2 gr rough weight, KM138

Circulation coins Europe approx. 73 pcs,

Circulation coins Spain European Football Championship 1980-1982 13x 1 Peseta, 14x 5 Pesetas, 3x 50 Pesetas, PTA 233,-, total approx. 30 pieces

Auction-ID: A1-48540-867

Fine-sawn board made of Central European Spruce, impregnated with a size of 179.5x20x1.9 cm. Auction-ID: A1-45071-2183

Fine-sawn board made of Central European Spruce, impregnated with a size of 179.5x20x1.9 cm. Auction-ID: A1-45071-2185

Fine-sawn board made of Central European Spruce, impregnated with a size of 179.5x20x1.9 cm. Auction-ID: A1-45071-2184

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48622-67

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48622-297

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48621-67

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48621-297

dimensions of 1 piece - 22 x 70 x 300 mm, quantity - 57,4m2, 1 pkg: 1,008 m2, transport dimensions - 1 pallets 800 x 1200 x 1250 mm Auction-ID: A7-48740-41

dimensions of 1 piece - 15 x 70 x 350 mm, quantity - 208m2, 1 pkg: 1,176 m2 transport dimensions - 3 pallets 800 x 1200 x 1250 mm Auction-ID: A7-48740-22

dimensions of 1 piece - 15 x 150 x 300-1200 mm, quantity - 11m2, 1pkg: 1,26 m2, transport dimensions - 1 pallet 800 x 1200 x 600 mm Auction-ID: A7-48740-53

dimensions of 1 piece - 15/4 x 1000 x 1000mm, quantity - 70m2, transport dimensions - 1 pallet 1000 x 1200 x 1250mm Auction-ID: A7-48740-1

dimensions of 1 piece - 15 x 130 x 300-600 mm, quantity - 70,50m2, 1pkg: 0,936- 1,877 m2, transport dimensions - 2 pallets 800 x 1200 x 1250 mm Auction-ID: A7-48740-51

dimensions of 1 piece - 15 x 60 x 300 mm, quantity - 254,72m2, 1 pkg: 0,864 m2, transport dimensions - 4 pallets 800 x 1200 x 1250 mm Auction-ID: A7-48740-13

dimensions of 1 piece - 14 x 70 x 300-800 mm, quantity - 208m2, 1 pkg: 1,008 - 2,688 m2, transport dimensions - 4 pallets 800 x 1200 x 1250 mm Auction-ID: A7-48740-43

dimensions of 1 piece - 15 x 70 x 500 mm, quantity - 158m2, 1 pkg: 1,680 m2, transport dimensions - 3 pallets 800 x 1200 x 1250 mm Auction-ID: A7-48740-28

dimensions of 1 piece - 14 x 80 x 380 mm, quantity - 52,04m2, 1pkg: 0,182 m2, transport dimensions - 1 pallet 800 x 1200 x 1250 mm Auction-ID: A7-48740-47