hel europe used for sale

Fan, ventilator, electric motor, blower, axial high-performance fan -Manufacturer:Helios, axial fan axial fan suction fan -Power: 1.1 kW 2890 rpm / 1.1 kW 2880 rpm -Fan: Ø 400 mm -Number: 7x fans available -Price: per piece -Dimensions: 610/350/H610 mm / 635/350/H635 mm -Weight: 28 kg/piece / 32 kg/piece

Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

This HELLER MC 16 with pallet pool was manufactured in 1999. It features a Control Uni Pro system, a 120-tool magazine, and an HSK-63A tool holder. The spindle operates at a speed of 16,000 rpm. Consider the opportunity to buy this HELLER MC 16 horizontal machining centre. Contact us for more information.

Geared motor, electric motor, electric geared motor, crane motor, crane drive -Manufacturer: HELIN, geared motor from Lotze HDZK swivel bending machine -Type: DKH 12.5a-4 -Speed: approx. 340 rpm -Motor: 2.2 kW / 1400 rpm -Voltage: 220/380 V -Shaft: Ø 33 x 40 mm -Dimensions: 750/410/H295 mm -Weight: 135 kg

Fan, ventilator, electric motor, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan, axial wall fan, duct fan -Manufacturer: Helios, axial fan tube fan type HRW 35/4 -Power: 0.14 kW / 1400 rpm -Bolt circle: Ø 395 x 10 mm -Dimensions: Ø 425 x 300 mm -Weight: 13 kg

This 4-axis HELLER MC 16-2 was manufactured in 1999. It features a Siemens control system, a robust tool magazine with 160 slots, and an HSK-63A tool holder. The spindle operates at a speed of 10,000 rpm, ideal for detailed machining tasks. If you are looking to get high-quality milling capabilities, consider the HELLER MC 16-2 machine we have for sale. Contact us for more information about this machine.

Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Manufacturer: Helios, outside micrometer -Measuring range: 0-25 mm -Reading: 0.01 mm -locking device -Number: 2x micrometer available -Price: per piece -other sizes: also available -Case dimensions: 150/75/H25 mm -Weight: 0.3 kg/piece

An old eccentric press Elmerding with defective foot switch is available. Press capacity 30°: 25t, stroke adjustment range: 12mm-80mm, ram adjustment: 60mm, stroke rate: 120rpm, table adjustment: 150mm, safety distance: 144mm, weight: approx. 1450kg. Only 2-hand operation is possible. Documentation available. An on-site inspection is possible.

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder -Manufacturer: Helm, suspension clamp, rail holder, galvanized yellow -Type: 1508 -Dimensions: see photos -Quantity: 30x suspension clamps available -Price: per piece / Minimum order 2 pieces -Dimensions: 90/70/H120 mm -Weight: 1.2 kg/pc.

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helm, suspension clamp rail holder galvanized blue painted -Type: 1508 -Dimensions: see photos -Quantity: 10x Suspension clamp available -Price: per piece/ minimum order 2 pieces -Dimensions: 90/70/H120 mm -Weight: 0,6 kg/piece

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helm, clamp sleeve suspension clamp rail holder galvanized -Type: 1505 -Dimensions: see photos -Quantity: 10x clamp sleeve available -Price: per piece -Dimensions: 90/115/H140 mm -Weight: 1.8 kg/piece

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helm, clamp sleeve suspension clamp rail holder galvanized -Type: 1505 24 -Dimensions: see photos -Quantity: 10x clamp sleeve available -Price: per piece -Dimensions: 90/115/H140 mm -Weight: 1.8 kg/piece

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve, clamping sleeve, sleeve -Manufacturer: Helm, sliding gate sleeve, height-adjustable sliding gate sleeve -Type: 1998 Width 80 mm -Thread: M20 -Dimensions: see photos -Number: 7x sleeve available -Price: per piece -Dimensions: 90/115/H140 mm -Weight: 1.8 kg/piece

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve, clamping sleeve, sleeve -Manufacturer: Helmet, rail holder -Type: HL width 80 mm -Dimensions: see photos -Number: 5x holders available -Price: per piece -Dimensions: 300/210/H135 mm -Weight: 4.6 kg/piece

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve, clamping sleeve, sleeve -Manufacturer: Helmet, rail holder with folding bracket -Type: HL width 80 mm / profile 300 -Dimensions: see photos -Number: 1x holders available -Dimensions: 335/180/H115 mm -Weight: 5.1 kg

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve, clamping sleeve, sleeve -Manufacturer: Helmet, rail holder with folding bracket -Type: HL width 80 mm / profile 300 -Dimensions: see photos -Number: 4x holders available -Price: per piece -Dimensions: 250/180/H115 mm -Weight: 5.4 kg/piece

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve, clamping sleeve, sleeve -Manufacturer: Helmet, rail holder with folding bracket -Type: HL width 80 mm -Dimensions: see photos -Number: 3x holders available -Price: per piece -Dimensions: 180/140/H130 mm -Weight: 4.3 kg/piece

Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station, drying container -Manufacturer: Helios, Drying container granule dryer Heliostat WFAT-8490 -Type: WFAT-8490 -Granule conveyor: Vari Color Vacumat type VM 5/BS -Individual components: see photos -Number: 4 devices available -Price: per piece -Dimensions: 820/550/H2460 mm -Weight: 96 kg/unit

Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station, drying container -Manufacturer: Helios, Drying container granulate dryer Heliostat -Granule conveyor: Vari Color Vacumat type VM 5/BS -Individual components: see photos -Quantity: 4 pieces available Price: per piece Dimensions: 930/670/H2870 mm -Weight: 123 kg/unit

Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERVL65B -Pressure capacity: 65 tons -Coupling: pneumatic -Drive: 5.0/6.0 kW 1440/2890 rpm -Stroke: adjustable 14 - 90 mm -Table size: 590 x 740 mm -Table cutout: 140 x 240 mm -Protrusion: 310 mm -Punch holder: Ø 40 mm -Insertion height 340 mm -Dimensions: 2070/1050/H2140 mm -Weight: 4430 kg

Manufacturer: Helotec, Type: Plattenlager, Year: 2006, Control: Ferrocontrol, Online connection to following machines: möglich, Chaotische Lager: yes, Lagerabmessung Meter: ca.10 X 38, Plattenstärken min-max mm: 8-22, Beschichtet Platten: yes, Halbformatplatten-Format: yes, Einlagerplätze: 1, Auslagerplätze: 1, Min-max stack dimensions length: 2800 X 2100, Verstellbare Saugtraverse : no, Transport roller conveyor: yes, Geschwindikeitfahrträger Brücke m/min: 80/60, Drehvorrichtung Hubsytem : yes, Hight of stacks max mm: 1440, Weight measurement: 200, Number of sucking lines: 2, Feeding speed continous adjustable: yes, Year :2006

HELLER H 2000 CNC horizontal machining center was built in 2022 by Heller Maschinenfabrik GmbH. The machine represents the fourth generation of the H series, specially designed for use in demanding production conditions. It is distinguished by its extensive equipment and the use of a number of state-of-the-art technical solutions that ensure reliable operation throughout its service life. The HELLER H 2000 is used for precise, 4-axis machining of workpieces with a maximum weight of 800 kg. The design of the machine provides the foundation for high productivity and machining accuracy. All structural components made of cast iron have been carefully topology optimised to ensure the highest stability and excellent force damping. Kinematics in all 4 axes, in turn, allows precise positioning of the tool in relation to the workpiece. Movement in the X-axis is carried out by a column, which s ...

Robopac HS30 wrapper, complete, with original documentation. Professionally dismantled

A W+D envelope manufacturing line is available. Blank length range: 265mm-653mm, blank width range: 214mm-726mm, max. production output: 450/min, paper weight range: 80g/m²-150g/m², max. paper roll diameter: 1500mm, max. paper roll width: 686mm, window reel width range: 30mm-490mm, window material section length range: 55mm-280mm. Documentation available. An on-site inspection is possible.

Description Linotype-Hell drum scanner ChromaGraph S3300 with photomultiplier technology max. original format 450 x 500 max. original thickness 2mm optical resolution 9600 dpi scale 20-2000% Dmax. 3.9 Weight 700kg included LinoColor 6 scanning software for Mac OS 9 Mountassistant 150 2 scanning rollers 150mm diameter

Key data: 630 mm, 630 mm, 630 mm

Spindle replacement 12/2018 Technical data: Manufacturer: Heller Type: H1000 Control: Siemens 840D SL Year of construction: 2008 (commissioning 2010/11) Travel X/Y/Z: X 630 mm, Y 630 mm, Z 630 mm Travel B-axis: 360° Working spindle Speed: 10,000 rpm (Kessler) Tools Tool changer: 54-fold Tool holder: SK40 Pallet changer: 2-fold Pallet size L/W: 500 x 400 mm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring system Drill Break Detection Chip conveyor Knoll coolant system with high pressure

Tetra Pak THX21, Helix accumulator, 1500ml/1000ml (and smaller). In its function, the Helix accumulator THX21 collects the packaging between the filling machine and the downstream equipment. In doing so, it ensures that downtimes of the filling machine are reduced and that no damage occurs to packaging in waiting positions. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

This 4-axis HELLER MC 16 was manufactured in 1999. It features a maximum spindle speed of 8000 rpm and an automatic tool changer with 40 positions. The machine is equipped with twin pallets and offers an XYZ travel of 630 x 630 x 630 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details.

pressure: 80 t throat: 300 mm stroke: 8-110 mm no. of strokes: 100 Hub/min ram - range of adjustment: 75 mm table surface area: 750x590 mm ram surface: 540x400 mm hole in the table: 200x200 mm table height: 780 mm tool hole in ram: Ø 40 mm total power requirement: 11 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 1200x1700x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis HELLER MCP 250 was manufactured in 2000. It features a maximum spindle speed of 6000 rpm and an automatic tool changer with 52 positions. The machine is equipped with twin pallets and offers an XYZ travel of 800 x 800 x 710 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MCP 250 horizontal machining centre we have for sale. Contact us for further details.

Robopac Pallet Wrapper – HELIX HS40 Machine Type: Robopac HELIX HS40 – Automatic Rotary Arm Stretch Winder Technical data: • Installed power: 4.5 kW • Voltage: 400 V / 50 Hz + N • Air consumption: 150 Nl/min • Operating pressure: 6 bar Product data: • Pallet size: 1,200 × 800 mm • Load size (variant 1): 1,000 × 700 mm • Load size (variant 2): 1,280 × 1,000 mm • Winding height: min. 250 mm – max. 1,600 mm • Loading weight: min. 50 kg – max. 1,500 kg ______________________________________________________________________ _ Robopac Pallet Stretch Wrapper – HELIX HS40 Machine type: Robopac HELIX HS40 – Automatic rotary arm stretch wrapper Technical specifications: • Installed power: 4.5 kW • Voltage: 400 V / 50 Hz + N • Air consumption: 150 Nl/min • Working pressure: 6 bar Product specifications: • Pallet size: 1200 × 800 mm  ...

This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details.

This 4-axis HELLER MC 16 was manufactured in 1999. It features a maximum spindle speed of 8000 rpm and is equipped with a tool magazine that holds 40 tools. The machine also includes a twin pallet system for enhanced productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details.

General SKU274P409 MakeHellmich Behälter- und Apparatebau (DE) No.4972 Year of construction1998 Mounted on legscheck Pressure Working pressure6 Bar Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume13300 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity13300 Ltr Vessel sizesdia.2300mm x2700mm Dished bottomcheck Dished top sidecheck Manholedia.500mm Top connections(8x)dia.80mm, (3x)dia.50mm, dia.100mm Outletdia.100mm Half coil jacketed(488 Ltr) Max. temperature120 degr.C. With paddle stirrertype FGRLR-80D Motor15 KW, 290/500 Volt Speed mixing shaft59 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4541 (321) General LocationBarneveld Floorspace2,6x2,6 M Total height5,5 M Weight6000 KGPaints & coatingsGeneric medicinesOintmentsFine chemicalsStainless Steel ReactorsOther che ...

General SKU274P408 LocationBarneveld MakeHellmich Behälter- und Apparatebau (DE) No.4973 Pressure Working pressure6 Bar Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume10500 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity13300 Ltr (netto ±10.500 Ltr.) Vessel sizesdia.2300mm x2700mm Dished bottomcheck Dished top sidecheck Manholedia.500mm Top connections(8x)dia.80mm, (3x)dia.50mm, dia.100mm Outletdia.100mm Half coil jacketed(488 Ltr) Max. temperature120°C. With paddle stirrertype FGRLR-80D Motor15 KW, 290/500 Volt Speed mixing shaft59 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4541 (321) General Year of construction1998 Mounted on legscheck Floorspace2,6x2,6 m Total height5,5 m Weight6000 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicines ...

horizontal machining center, year 2007, CNC 840D. Used machine in good condition. More info & price on IndustrialBuyer.

HELD E90 Edge Grinding Machine -Motor power: 1.1 kW -Speed: 8,400 rpm -Support/stop surface: 800 x 50 mm -Support length: 500 mm -Footprint: 550 x 500 mm -Suitable for deburring -Suitable for breaking edges -Suitable for chamfering Dimensions: LxWxH 0.5x1.0x1.0 meters / Weight 100Kg

Suitable for regrinding and production of wood and metalworking tools of all kinds., Accessories:, Total enclosure, Fanuc robot loader with 6 controlled axes and camera system, Software Toolstudio Standard & Advanced Version 3, Software Helitronic Toolstudio Option Step Tools/Drills, Automatic fire extinguishing system, Drive chiller for all drives, Measuring probe, Oil drip tray, Glass scales on the linear axes, Electrostatic mist collector, Pneumatic workpiece clamping, Automatic, hydraulically actuated steady rest, Measuring mandrel ISO 50, 3 grinding wheel adaptors, Longitudinal movement (X-axis): 400 mm, autom. X‘-axis for moving the workpiece carrier: 110 mm, Vertical movement (Y-axis): 320 mm, Transverse movement (Z-axis): 320 mm, Rotary table swivel range (C-axis): - 110 ° - + / 160 °, Swivel range B-axis (grinding head): +/- 20 °, Workpiece carrier (A-axis): ISO 40, Speed  ...

This 4-axis HELLER MCH 250 was manufactured in 2007. It features a spindle speed of 6000 rpm and a BT50 tool holder. The machine is equipped with an automatic tool changer that holds 100 tools, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details.

Offer 26165 Technical data - Two driven rollers, each roller hydraulically adjustable - For bending and conical rolling - Operation of separate control panel, with digital actual value display - and manual operation - Max. working width 1300 mm - Max. sheet thickness at 400 N/mm² without bending - With a bending diameter of 370 mm, 30 mm inside - With bending at bending diameter 370 mm, inside 25 mm - without bending with a bending diameter of 380 mm inside and - Width of 370 mm 45 mm - Upper roller diameter each 300 mm - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW - Required space W 5800 x H 1900 x D 2200 mm - Weight 8500 kg

Manufacturer:Heller Model: H6000 Type of machine: CNC Machining Center Year of manufacture: 2015 Control: Siemens 840D sl Axis travel: XYZB 1000/1000/1000/360x0.001 degrees Spindle: HSK100, 8000 rpm, 43kW Tool magazine: 265 positions Pallet system: Fastems pallet system with 20 pallet spaces Voltage: 3~ 400V Frequency: 50Hz Nominal current: 72A Short circuit current rating: 9kA Condition: Very Good Find more here - .ucymachines/ Contact us at - sales@ucymachines

Used Capping Machine Tetra Pak Helicap 23 6000 bph The used capping machine Tetra Pak Helicap 23 6000 bph applies plastic screw caps to carton packages. Specifically, Tetra Pak manufactured this model in 2007 and configured it for the 1000 Slim format. The Slim format, which is widely used, has a rectangular profile and a reduced cross-section. As a result, it optimizes liquid packaging by improving shelf stability and reducing material consumption. Technical Specifications of the Used Capping Machine Tetra Pak The Helicap 23 model applies the CAP 47 screw cap, which ensures a hermetic seal and allows easy opening for the consumer. Moreover, the screwing system maintains a consistent torque so that leaks or packaging defects do not occur. The Used Capping Machine Tetra Pak Helicap 23 6000 bph operates with a 400/230 VAC power supply, meaning that it supports both industrial three-phase n ...

Used Tetra Pak HELIX 30 accumulator year 2018 Accumulation and Flow Management The Tetra Pak HELIX 30 from 2018 optimizes the accumulation and flow of production lines with advanced technology. Moreover, this machine handles large quantities of packaging efficiently and ensures operational continuity during slowdowns or stops in subsequent stages of the production line. Technical Specifications of the Tetra Pak HELIX 30 The machine, identified as H236-ACHX, processes the 200S format with exceptional versatility for industrial applications. Furthermore, Tetra Pak’s Helix technology facilitates smooth and uninterrupted accumulation, reducing the risk of container damage and enhancing productivity. Consequently, the model achieves a nominal capacity of 44M, making it highly effective for high-speed production lines. Innovation in Container Accumulation in the Tetra Pak Helix 30 The Tetra  ...

It utilizes Near-Infrared (NIR) sensors, used in automated recycling and waste management facilities to identify and sort plastics. Note the camera needs to be replaced. The machine cant run without it. 1. General Specifications - Minimum Grain/Particle Size: 15 mm - Maximum Grain/Particle Size: 220 mm - Weight Distribution of Sorted Material: - 35 g per piece (making up 25% of the volume) - 50 g per piece (making up 75% of the volume) - Total Machine Weight: 1,650 kg 2. Electrical & Power Requirements - Electrical Connection: 380–440 VAC, 3-Phase, 50/60 Hz - Connected Load / Power Consumption: 10 kW 3. Optical & Scanning System (Light Bridge) - Resolution: 240 Pixels - Scanning Width: 1,000 mm (1 meter) - Clear Height above Belt: Approx. 250 mm 4. Pneumatic Ejection System (Nozzle Bar) - Valves with Nozzles: 62 - Nozzle Pitch / Distance: 15.5 mm - Maximum Pressure: 10 bar - O ...

x-travel: 800 mm y-travel: 630 mm z-travel: 560 mm total power requirement: 60 kW weight of the machine ca.: 12.5 t dimensions of the machine ca.: m H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _______________________________________________________ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features 5-Axis SIEMENS CNC Path Control, Mode ...

Offered is a WALTER 5-axis CNC tool grinding machine for the production and resharpening of rotationally symmetrical cutting tools such as drills, milling cutters, reamers and special tools. Travels X/Y/Z: 400mm/250mm/580mm, C-axis swivel range: +/-200°, A axis: 360°, rapid traverse X/Y/Z: max. 15m/min, linear axis resolution: 0.0001mm, center height range: 130mm-165mm, max. workpiece diameter: 190mm, workpiece mounting: ISO 50, spindle motor power: 4.4kW, grinding spindle speed: 6000rpm, spindle diameter: 70mm, max. grinding wheel diameter: 200mm, control: WALTER HMC 400. Overall dimensions X/Y/Z: approx. 1420mm/2010mm/2150mm, weight: approx. 3100kg. An on-site inspection is possible.

x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm Control: Siemens type: 840 D size of pallet: 400x500 mm numbers of pallets: 4 : 360 ° turning speeds: 10-16000 U/min Tool changer: 160 Pos. Cooling through the spindle: spindle taper:: HSK 63 chip conveyor: total power requirement: 55 kW weight of the machine ca.: 11 t dimensions of the machine ca.: m Machine with Siemens 840 D control for 4 axes - Digital drive technology, direct position measuring systems - 4-position pallet changer - Full B-axis - Coolant system with internal coolant supply - Hydraulic workpiece clamping - Filtration system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 i ...

throat: 600 mm tool adaptor: 50,60 SK power requirement: . kW flange:: 500x500 mm Width of nail head: 270x220 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: 600 mm tool adaptor: 60,60 SK power requirement: . kW flange:: 500x500 mm Width of nail head: 320x300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: . mm grinding width: . mm workpiece height: . mm Table: 870x130 mm total power requirement: 2,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2x1x2 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.