137,098 used machines on RESALE, but how to find them? Machine Search
Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder -Manufacturer: Helm, suspension clamp rail holder galvanized yellow -Type: 8091 -Dimensions: see photos -Number: 6x suspension clamp available -Price: per piece -Dimensions: 110/85/H150 mm -Weight: 2.6 kg/piece
Digital Micrometer HELIOS Digitrix II 100 - 125 mm in wooden box used, tested ! Dimensions: 320 x 195 x 50 mm
Digital Micrometer HELIOS Digitrix II 225 - 250 mm in wooden box used, tested ! Dimensions: 445 x 285 x 50 mm
Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder -Manufacturer: Helm, suspension clamp rail holder galvanized yellow -Type: 1508 Width 70 mm -Dimensions: see photos -Number: 2x suspension clamp available -Price: per piece -Dimensions: 295/90/H150 mm -Weight: 1.9 kg/piece
Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve, clamping sleeve, sleeve -Manufacturer: Helmet, rail holder -Type: HL width 80 mm -Dimensions: see photos -Quantity: 1x holder available -Dimensions: 180/140/H115 mm -Weight: 2.9 kg
power capacity: 12 Nm volt: 210 V ampere: 21,5 A total power requirement: kW weight of the machine ca.: 13 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fan, ventilator, electric motor, blower, axial high-performance fan -Manufacturer:Helios, axial fan axial fan suction fan -Power: 1.1 kW 2880 rpm -Fan: Ø 400 mm -Number: 2x fans available -Price: per piece -Dimensions: 530/530/300 mm -Weight: 17 kg/piece
Fan, ventilator, electric motor, blower, axial high-performance fan -Manufacturer:Helios, axial fan axial fan suction fan -Power: 1.1 kW 2880 rpm -Fan: Ø 400 mm -Number: 10x fans available -Price: per piece -Dimensions: 430/430/300 mm -Weight: 13 kg/piece
Optical Laser color sorter BEST Helius C 1200D Optical Laser color sorter
Inv. Num. : 3483 Type: HELICHECK Producer: WALTER MASCHINENBAU Created: 2004 Parameters: The machine is in good technical condition and energized Accessories: Hydraulic clamps SK50
Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station -Manufacturer: Heliostat granule dryer without drying container -Type: Heliostat WFAT-8490 -Individual components: see photos -Dimensions: 1360/1340/H1910 mm -Weight: 757 kg/unit
x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm total power requirement: 30 kW weight of the machine ca.: 12500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 3200 mm plate thickness: 83 mm pre-bending: 72 mm roll diam. toproll: 700 mm roll diam. bottom roll: 650 mm side roll diameter: 550 mm distance between columns: 3300 mm roll drive: 93,2 kW turning speeds: 2 - 4 m/min total power requirement: - kW weight of the machine ca.: 78 t dimensions of the machine ca.: 9 x 3,3 x 3,4 m 4 –Roll Bending Machine - 4 roll Pinch bending - Pre-bending - Tilting function -- Hydraulic front bearing tilting speed: 450mm/min -- Hydraulic tilting of top roll: 250mm/min - CE 2 Units available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Radius cutter, milling cutter -Finishing cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS -Quantity: 17 pieces -Sale/Price: complete -Weight: 5 kg
saw blade diameter: NA mm cutting diameter: NA mm stroke: mm working area: 90 mm workpiece dia.: 90 x 500 mm feed:: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: max 400 mm : mit Sägeblättern weight of the machine ca.: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This Walter Helitronic Power Grinding machine was manufactured in the year 2004. It is equipped with a WALTER HMC 600 control unit and has 5 axis. The machine has a spindle speed of 7000 rpm.
Fan, blower, duct fan, duct radial fan -Manufacturer: Helios, duct fan type KD 355/6/70/40 -Power: 1.63 kW 806 rpm -Fan wheel: Ø 360 mm -Number: 2 fans included -Price: per piece -Dimensions: 740/785/H475 mm -Weight: 43 kg/pc.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MKF crane beam adjustable with motor Adjustable trusses are used when towing distances and load centres vary. Facilities & Highlights: Central suspension point: Solid triangular eye for the crane hook Electrical center of gravity correction: Electromotive drive (connection via 230V CEE plug) for balancing uneven loads directly at the touch of a button. Ergonomic control panel: Height-adjustable control unit panel on a vertical rail guide with drag chain (energy chain) to protect the cables. Clear controls: Controls for bolts (open / closed / impermissible position) and centre of gravity correction (incl. LED display for the centre position) as well as a central emergency stop switch. Transport frame included: Robust, mobile base made of square steel for safe and compliant storage. Technical data Manufacturer: MKF Helmut Möschl GmbH Payload: 9,000 kg Net weigh ...
Manufacturer: Model: Power: 12,000.00 kW Voltage: 10,000.00 V Y Speed: 1,500.00 rpm Rated motor current: 788 A Rated frequency: 50 Hz Rated motor speed: 1,494 rpm Power factor (cos φ): 0.88 (50%), 0.90 (75%), 0.85 (100%) - Efficiency (EN 60034-2-1:2008): - 50%: 96.8% - 75%: 97.4% - 100%: 97.2% Starting/Rated current (Ia/In): 5.0 Starting/Rated torque (Ma/Mn): 1.9 Breakdown/Rated torque (Mk/Mn): 2.3 Mechanical Data - Number of poles: 4 - Weight: 29,000 kg - Frame size: 900 - Type of construction: IM B3/D5 - Housing material: Welded steel - Terminal box material: Welded steel - Bearing type: Sleeve bearing with circulating lubrication (both DE and NDE) - Rotor inertia: 540 kgm² - Cooling method: IC81W (water cooling) - Water inlet temperature: 28°C - Water quantity: approx. 50 m³/h Including base plates for size adjustment Environmental and Operating Conditions - Ambie ...
Total 2 HeliCoil plus sets; unused; Art.No: 63300 4185 114 9100; further details see photos
Total 2 HeliCoil plus sets; unused; Art.No: 63300 4185 114 9100; further details see photos
Caster, swivel caster, transport equipment caster, fixed caster, double caster -Manufacturer: Dörner & Helmer, 4 pieces swivel caster double caster with plate and brake -Type: 778310 -Wheel: Ø 50 x 19 mm rubber -Submission/Price: complete -Dimensions each: 110/60/H75 mm -Weight: 0.4 kg/pc.
Copy cutter Helma Type: CF 40 Machine No. 7825 Table dimensions 700 x 1120 mm Diameter of the 2 working spindles 30 mm Working spindle speed 10500 rpm max. milling height 100 mm Vertical adjustment of the cutter heads or milling cutters for profile correction 10 mm max. distance between the spindles from center to center 450 mm Distance between feed shafts from center to center 235 mm Spindle motors 2 x 5.5 kW Feed motor 0.37 kW Feed speeds 1.8 – 10 m/min. infinitely variable Air consumption max. 20 l/min. Net weight of the machine 900 kg
Key data: 1400 mm, 1200 mm, 1400 mm
Horiz. Machining center with 2-fold pallet changer and shelf magazine Pallet size 800 x 800 mm Number of pallets 2 NC rotary table 360,000 positions Spindle speed up to 8,000 1/min Drive power 60 KW - 1146 Nm Tool magazine 265 tool positions Tool holder SK 50 - Coolant system: KNOLL - IKZ 70 bar - Work area flushing - Renishaw touch probe - Drill break control - Windshield blowing device - Tool and collision monitoring - Chip conveyors - Cooling temperature control - Feed force indicator - CNC control Siemens 840D SL
Cooling unit, cooling water recirculating cooler, water cooler, chiller O. HellwigYear of construction: approx. 1995Cooling capacity approx. 6 kWNight cooling unit 3 kWaverse refrigerant R422DWasser tank capacity approx. 35 litresFlow volume circulation pump 40 litres/minPump capacity 0.63 kWWasser connections 1/2 inchMains connection 380 volts, 50 Hz- temperature setting via rotary potentioSpace requirement L x W x H 1100 x 750 x 140 mmWeight 285 kg; used
This 4-axis HELLER H5000 was manufactured in 2009. It features a Fanuc 310i control system, ensuring reliable operation. If you are looking to get high-quality machining capabilities, consider the HELLER H5000 horizontal machining centre we have for sale. Contact us for further details.
This 4-axis HELLER H5000 horizontal machining centre was manufactured in 2021. It features a working range of 800 mm in all axes and a maximum workpiece diameter of 900 mm. The machine includes a tool taper of HSK-A 100 and a tool magazine capacity of 100 slots. If you are looking to get high-quality machining capabilities, consider the HELLER H5000 machine we have for sale. Contact us for further details.
This 4-axis HELLER H6000 horizontal machining centre was manufactured in 2011. It features a generous X, Y, and Z-axis travel of 1,000 mm each, along with a B-axis NC rotary table. The machine is equipped with a SIEMENS 840D control unit and has a maximum permissible clamping mass of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER H6000 machine we have for sale. Contact us for further details.
Single-column eccentric press HELMERDING type TPEP 12 BMasch. No. 831-101 Comm. No. 76228 Year of construction 1976Compressive force 12 ton. Projection 155 mmTable surface 400 x 320 mmTable opening 125 mmPlunger area 125 x 100 mmLifting adjustment 6-60 mmRam adjustment range 40 mmClamping pin hole 25 mm with clamping pieceInstallation height max. 250 mmStroke rate 180 strokes/min. Drive power 1.1kW- Electric foot switch and 2-hand operation- Setup, single stroke 2-hand, single stroke foot and continuous running foot, automatic
pressure: 35 t throat: 240 mm stroke: 12-84 mm no. of strokes: 135 Hub/min ram - range of adjustment: 70 mm table surface area: 600x450 mm ram surface: 360x180 mm hole in the table: 220x130 mm table height: 630 mm tool hole in ram: Ø35 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: BxTxH 1500x2000x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General SKU437W1431 LocationBarneveld CEcheck MakeH.E.L. Main Features MaterialGlass Specified Features - Miscellaneous Capacity-40°C to +200°C Motor230 volt Capacity4 x 100 ml MaterialBorosilicate Glass 3.3 General TypePoly-block Mach.No.E1039S Year of construction2011 Floor space0,30x0,50 m Total height0,50 m Weight50 kg Extra SpecificationsCompact automated parallel synthesis platform, 4 reaction zonesindependent agitation control, 250 to 1500 rpmwith partsGeneric medicinesOintmentsMiscellaneousTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarDairyLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlasti ...
offered is a forklift from the manufacturer Anhui Heli from 7/ 2021. The forklift was used little after purchase, which caused the traction battery to be deeply discharged. This would have to be replaced, which was taken into account accordingly in the purchase price. Technical data: Manufacturer: Anhui Heli Co. Ltd Model No.: CDD12J Serial No.: 08012JL280 Capacity: 1200 KG Max. height: 3000 mm Fork length: 1070mm Weight: 488 KG Year of manufacture: 7/ 2021 The forklift is currently at our customer in Magdeburg and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are understood as net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty a ...
Control Siemens 840D powerline Travel X/Y/Z 630/630/630 mm 2-fold pallet changer Speed 10000 1/min Knoll coolant system with paper belt filter Tool holder: SK40 Tool magazine 80 spaces
Heller MC16 Nr31-43487 BJ. 2009 Spindle revolutions 1/min 45-16000 SK40 Travel ranges mm X 630 Y 630 Pobmlb Saowfd Eusljrd Z 630 Travel speed mm/min 1-40000 Number of tools 80 Tool mm 70/150 (for free secondary spaces) Tool length mm 320 Number of pallets 2 Pallet dimensions 400 x 500 Max. load pallet kg 500 B Axis NC Control system Sinumerik 840D Probe Heidenhain Yes Power kVA 60 Machine No. 63
WALTER Helitronic Power Diamond CNC Sharpener TECHNICAL FEATURES: Year: 2015 NC Type: FANUC Series 31i-B5 Software version installed: Tool Studio 2.1 R8 Color Touch Screen: 15 ["] Number of axes: 5 X-axis travel: 460 [mm] X-axis resolution: 0.0001 [mm] Y-axis travel: 320 [mm] Y-axis resolution: 0.0001 [mm] Z-axis travel: 660 [mm] Z-axis resolution: 0.0001 [mm] X, Y and Z fast travel speed: 15000 [mm/min] A-axis travel: 360 [°] C-axis travel: +/- 200 [°] C-axis resolution: 0.0001 [°] Max. length Workpiece: Face grinding: 280 [mm] Max. length of sharpening: 350 [mm] Max. diameter of sharpening: 320 [mm] Wheel Holder Spindle Attachment: HSK-50 Maximum speed Grinding spindle: 10500 [rpm] Wheel spindle power: 14.5 [kW] Max. diameter Grinding wheel: 200 [mm] Workpiece Spindle Nose: ISO 50 Max. weight permissible workpiece headstock: 20 [Kg] Working time: ...
Heller MC16 Nr 31-43514 BJ. 2009 Spindle revolutions 1/min. 45-16000 Psbmlb Sswffd Ssaljrd SK40 Travel Distances mm X 630 Y 630 Z 630 Travel speed mm/min 1-40000 Number of tools 80 Tool diameter mm 70/150 (for free secondary spaces) Tool length mm 320 Number of pallets 2 Dimensions pallets 400 x 500 Max. pallet load KG 500 B Axis NC Control system Sinumerik 840D Probe Heidenhain Yes Power kVA 60 Machine No. 73 ATL iTM400HP nr.14916 BJ.2009 Power kVA 30 Standard deburring chamber 400 / 400 mm Max. gas filling pressure 20 bar Siemens Multipanel with Windows CE operating system
Dynajet 350 TH Heli – Used High-Pressure Cleaner Used Dynajet 350 TH Heli high-pressure cleaner in very good condition. Technical details: Year of manufacture: 2022 Operating pressure: 350 bar Flow rate: 16 l/min Operating hours: 331 hours Equipment: Including accessories The machine is well maintained and ready for immediate use. More information, photos, and price available on request.
Working width: 4040mm, max. sheet thickness steel/stainless steel: 5mm/3mm, back gauge: 1000mm, weight: approx. 7000kg, control system: Elgo, working hours: approx. 22051h. An on-site inspection is possible.
A total of five (5) compact Helios granulate dryers with integrated conveying and control are available. Year of manufacture: 4x2016/1x2019, drying hopper volume: 30l, suction lance length: 810mm, drying capacity: approx. 6kg/h, max. drying temperature: 185°C. Machine dimensions X/Y/Z: approx. 420mm/420mm/625mm, weight: approx. 80kg, control: WINneo basic. Including conveying unit with dedusting and dust collection container with filter. Documentation available. An on site inspection is possible.
It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system.
Stretch wrapper Robopac type Helix HS40 with rotating arm speed: 45 - 50 pallets/hour voltage: 400 V top sheet cover insertion possible delivery without pallet transport and safety fencing
This 4-axis HELLER MCH 350 was manufactured in 2006, featuring a Siemens 840D PL control system and a robust spindle capable of 7,000 rpm. It includes a HSK 100 tool clamping system and a large magazine with 234 slots. The machine offers a substantial working area of 1250 x 1000 x 1000 mm and a pallet size of 800 x 800 mm. For more information about this machining centre, please reach out to us.
Bridge crane, hall crane, assembly crane, workplace crane, ceiling crane system -without chain hoist (available for an extra charge) -Load capacity: 1000 kg -Span width: 3100 mm -Crane length: 4100 mm -Helmet rails -Interior height of the profile: 65 mm -Inside width of the profile: 70 mm -Transport dimensions: 4140/450/H250 mm -Own weight: 180 kg
This 4-axis HELLER H2000 horizontal machining center was manufactured in 2017. It features a Siemens 840D Solution Line control, rapid traverse of 60,000 mm/min, and a spindle speed of 10,000 rpm. The machine can handle workpieces up to 720 mm in diameter and 850 mm in height, with a maximum table load of 600 kg. Consider the opportunity to buy this HELLER H2000 horizontal machining center. Contact us for more information about this machine.
maximum number of results exceeded
please refine your search
