heidenhain deckel used for sale

industrial spare monitor 12.1 "TFT monitor Fits lid machines with dialog 11 control high quality anti-reflective glass Technical data: TFT-LCD monitor 12.1 inch Display/Aufloessung 800 x 600 pixels Brightness 400 cd/m2 Contrast ratio 500:1 Response time 8 ms Frequency 60 hz Display area 246 x 185 mm External power supply 12V Betriebstemeratur-10 ° c + 60 ° c Power consumption of 30 W Max D-Sub 9pin connector. 2 row OSD control brightness, Kontrastveraeltnis, car customization Phase position, clock, language install, reset Accessories: Achschlusskabel, power supply 24 month warranty! More monitors, new and used on request!

Height gauge HEIDENHAIN measuring instrument Measuring length: 620 mm, type LS 803 Digital device, type VRZ 381 Condition: used Data cable, power cord All information without guarantee

The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by a conector 20pol. he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation.

CNC Vertical Machining Center DECKEL-MAHO Model: DMC 70V Manufacturer: DECKEL-MAHO Model: DMC 70V New in: 1999 Condition: very good, complete Technical details Table size: 900x550 mm Max. table load: 600 kg X travel: 700 mm Y travel: 550 mm Z travel: 500 mm Spindle speed: 30 000 rpm Spindle taper: HSK 50 Total power requirement: 10/15 kW Dimensions: 3900x3700x3000 mm Machine weight: approx 8000 kg

Stahlblech lackiert Innenliegende Rohre: 200 mm lang Ø 25 mm - Width 635 mm - Height 400 mm - Depth 420 mm - mobile - Wiht mobile cleaning basket aus Stahlblech, 395 x 620 mm - Location on stock

Description: Consisting of 3 horizontal spindles and a counterholder weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm

Universal Tilt-Tilt Swivel Turntable DECKEL FP2 FP3

Angle table suitable for tool milling machine cover FP4M / Active

Dmg deckel model dmc 60-h. Kessler 8000 rpm iso 40 electrospindle Number 2 pallets with size 500 x 400 Continuous b axis on the table High pressure through the spindle at 50 bar Carpet chip conveyor Siemens 840 CNC Rapid at 40000 mm / min. Working range 600x560x560 mm. Tool magazine of 40 seats. Laser control for the presence and length of the tool to be set. Revised electrospindle with 4500 hours of work, total hours of work around 34000; Immediate availability, visible under power

This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 3 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions.

Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!

CNC Boring Machine Table Type UNION Model: BFT 110 Manufacturer: UNION - Germany Model: BFT 110 Condition: very good, complete, no missing or broken parts CNC Control: HEIDENHAIN 150 Technical details: Spindle diameter: 110 mm Spindle taper: ISO 50 Table size: 1400 x 1600 mm X axis travel: 1985 mm Y axis travel: 1620 mm Z axis travel: 1960 mm W axis travel: 710 mm U axis travel: 250 mm

Data sheet / Offer spare Monitor Deckel Controls Dialog 11 Dialog 12 Overview: - 12,1 industrial monitors TFT substitute with 14CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by a Sub-D conector 25pol. he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation

With digital display HEIDENHAIN Technical data: x away the 700 mm y away 250 mm z off 490 mm Spindle speeds 38-1510 U/Min. Recording ISO 40 Feed 6 1050 mm / min Rapid traverse rate 3500 mm / min 1100 X 305 mm clamping surface Universal milling head swiveling 0° 270° Dimensions: 1930 x 1560 x 1720 mm Machine weight approx. 2100 kg

Technical data: X away the 800 mm Y away 300 mm Z away 400 mm Speed 40-2000 RPM. Recording ISO 40 Feed 10 500 mm / min. Spindle motor 2,2 KW

Main drive - spindle motor at 2450 RPM power - 4,5 kW spindle speed within four gears - infinitely variable speed range 20-4000, tool holder horizontal and vertical ISO 40 tool CLAMPING hydromechanisch 1200 daN, Quill stroke vertical fur 80 mm feed drive - single DC motors 1-2000 mm / min feed force in all axes each axis 5400 N, rapid traverse in all axes 5 m / mon workspace - along x axis 500 mm, cross y axis 360 mm, vertical z-axis 400 mm measurement - measurement of X, Y, Z - direct, resolution 0.001 mm, input gauge 0.001 mm, display step 0.005 mm, resolution 0.001 mm table AUFSPANNFLaeCHEN of rigid 4.Achse angle table 800 x 390 mm number and distance of T-grooves, wide T-slots 6/63/14 h7 NC rotary table 30 swivel 4.Achse - diameter. 380 mm control train control HEIDENHAIN TNC 115 / TNC 355 - screen screen - control SIEMENS 3 M4 810 M Kuhl installation - lubrication coolant - rinsing  ...

Description The machine was without Accessories: Spannznangen, div. end mill holders. Technical data: x away the 300 mm y away 150 mm z away 340 mm Table 210 x 600 mm Spindle speeds 40-2000 RPM. Feed 10 500 rpm. Recording ISO 40

Type U-1000 1991 year - X/Y/Z 1000x480x380 3-axis digital display Heidenhain Positip

Manufacturer: UNION - Gemany Model: BFT 130 / 5 Condition: very good New in.: 1978 / 2000 , the machine was completely modernized for Company ALSTOM Control: conventional with Heidenhain Linear readings in 3 axes Technical details: Spindle diameter: 130 mm Spindle speed: 4.5 - 900 rpm Spindle cones: MORSE 5 ( the price of the machine will deliver free of charge adapter for ISO 50 ) X axis: 1600 mm Y axis: 1600 mm Z axis: 2500 mm W axis: 1000 mm Table: 1600 x 1400 mm Table Rotation: 360 Charging the table: 8000 kg Speed: 4.5 to 180 rpm Power range: 0.63 to 2000 mm / min Fast forward: 2 m / min Total required power: 35 kW Approximate Weight: 47000 kg EQUIPMENT: Heidenhain readings line in three axes, flat disc

Description Digital display, route and position control HEIDENHAIN specifications: Traverse path x/Y/Z 400/410/400 mm Table size 800 x 450 mm Speed of 30 RPM/2240 Feed 1-750 mm / Rev Rapid traverse 2000 mm / min Toolholder SK 40

; very good

Description Feeds in all 3 axes adjustable Digital display, route and position control HEIDENHAIN TNC technical data: Traverse path X / Y / Z 500 / 500 / 400 mm Speed range 30-2240 Rev/min Spindle speeds 24 Feed range 1 750 mm / min Rapid traverse in all feed directions 1500 mm / min Size 450 x 800 mm Weight approx. 1400 kg

Control panel for MAHO Fraea machine 500W with Heidenhain control TNC 232; New

Bed feeding machine - Universal AUERBACH FBE 2000 Bearing No. 1105-01972 Category Bed frit machine - Universal Make Auerbach Type 2000 FBE Built in 1996 Condition Used machine Control CNC Heidenhain TNC 415 Storage location FRANCE Country of origin Germany Delivery time by appointment Freight base from stock Technical details x-way 2000 mm y-way 900 mm z-way 900 mm Table size 2100 x 800 mm Tool holder SK 50 Spindle speed: 30 - 3500 rpm Control Heidenhain TNC 415 Spindle drive 29/22 kW Feed speed 1 - 6000 mm/min Rapid speed 15 m/min Total power requirement 42 kVA Machine weight approx. 12.5 t Room requirement approx. 7.7 x 5.5 x 3.0 m Description 3-axis bed-feeding machine With MANUELER two-axle universal head , - vertical level 360 x 1 degree - 45" level 360 x 1 degree

Rebuilt lathe. Distance between centers: 750mm. Swing over bed: 500mm. Swing over carriage: 220mm. Spindle nose: 40,5mm. Motor power: 10cv. Equipped with universal chuck of 250mm. CE Protections in chuck and carriage and CE european certificate for second hand machines. Optional: Steady rest. Optional: CE back guard. Optional: DRO Fagor or Heidenhain.

Rebuilt lathe. Distance between centers: 1000mm. Swing over bed: 500mm. Swing over carriage: 220mm. Motor power: 10cv. Spindle nose: 40,5mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm. Optional: Steady rest. Optional: CE back guard. Optional: DRO Fagor or Heidenhain.

Fine drilling head for lid fraes machine, probably FP2, SK40, little used condition. Special price

Horizontal round table - with bearing tracks Bearing tracks can be easily removed, Geraet fully ready for use without restrictions! Diameter 600mm construction height 140mm Partial setup via angular scale It's immediately available. Further horizontal parts available, please ask price. If you are not able to see what you need, please ask, we have not put the whole stock in place and probably the right one in stock. - Diameter 500mm built-in height 120mm with direct pitch over cam and angle scale - 2 pcs. diameter 400mm, can be used horizontally and vertically, indirect pitch for discs, once as good as new, once with bearing tracks Vertical sub-cameras and universal horizontal / Vertical pivoting sub-cameras 1. Walter with three-jaw lining 2. Lid with three-jaw lining and counter holder Special price

Rebuilt lathe. Distance between centers: 1500mm. Swing over bed: 500mm. Swing over carriage: 220mm. Motor power: 10cv. Spindle nose: 40,5mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm and steady rest. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Control: Heidenhain TNC 360 (1992) Table size: 1000 x 1000 mm Table size with front extension: 1345 x 1000 mm Table load max.: 2000 kg Distance spindle centre to column min/max.: 270 ~ 1270 mm Distance spindle nose to table min/max.: 0 - 1100 mm Distance between the upright columns: 1855 mm Table longitudinal travel : 1400 mm Boring ram carriage cross travel: 900 mm Crossrail vertical travel: 850 mm Boring spindle travel: 370 mm Spindle motor rating: 6 KW Spindle speed range: 30 - 1500 rpm Boring spindle diameter: 82 mm Spindle taper: MK 5 Borer diameter: 2 - 70 mm Boring tool diameter: 17 - 450 mm Boring diameter in solid ST 60: 45 mm Boring diameter in solid Cast iron: 70 mm Equipped with: Tooling; Accessories Machine overhauled and retrofitted in 1992 !; Very good

Rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 1000mm. Motor power: 12,5cv. Spindle nose: 51mm. Equipped with universal chuck of 250mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: Steady rest. Optional: CE back guard

CNC double-staender coordinate drilling rig with deep drilling support Kolb KBN G 120 year 1984 / Converted to Heidenhain TNC 426 in 2006 table size 4250 x 2200 mm Table load 14 t Table laengsweg X 3000 mm Main Spindle crosspath Y 2180 mm deep drilling spindle crossing path A - 2000 mm spindle vertical path 500 mm Distance between the stems 2640 mm; spindle - table 100 - 1300 mm; spindle diameter 224 mm Spindle drive power 46 kW spindle speeds 14 - 1400 rpm spindle holder ISO 50 Drilling in steel ST60: 100 mm diameter; drill up to 300 mm; threaded cutting up to M 125 x 3; frard power 730 cm3r/min.; SECOND SUPPORT SUPPORT: spindle speeds at BTA and ELB drilling 315 - 3150 rpm high high pressure oil Offer number V(B)-5234; Very good

Rebuilt lathe. Distance between centers: 1500mm. Swing over bed: 575mm. Swing over carriage: 300mm. Motor power: 12,5cv. Spindle nose: 51mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm and steady rest. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

CNC Double column Coordinate Boring Machine with Deep Hole Drilling Support Kolb KBN G 120 Year of manufacture 1984 / Retrofitted with Heidenhain TNC 426 in 2006 Table size 4250 x 2200 mm Table load max. 14 t Table longitudinal travel X 3000 mm Main spindle cross travel Y 2180 mm Deep hole drilling support cross travel A - 2000 mm Spindle vertical travel Z 500 mm Distance between the columns 2640 mm; Spindle to table 100 - 1300 mm; Spindle diameter 224 mm Spindle drive motor rating 46 KW Spindle speeds 14 - 1400 rpm Spindle taper ISO 50 Drilling in steel ST60 : 100 mm diameter; Boring to 300 mm; Threading to M 125 x 3; Milling capacity 730 cm³/min.; Second support for Deep Hole Drilling Spindle speeds for BTA and ELB boring 315 - 3150 rpm High pressure cutting oil delivery to spindle Chip- and oil collection and separation via Centrifuge. Very good condition P ...

Rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 2000mm. Spindle nose: 51mm. Motor power: 12,5cv. Equipped with universal chuck of 250mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

2 pallets, 108 wkzg., BJ 1988, interior cooling, with PS8, various clamping means - see pictures

Pallet Pool PS8

Rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 3000mm. Spindle nose: 51mm. Motor power: 12,5cv. Equipped with universal chuck of 250mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

DECKEL GK21 Engraving frause machine More: DECKEL G1L Engraving fraese

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 1500mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 2000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315 and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

1 used Tischbohrwerk manufacturer: TOS Type: W75 1998. X-1250mm Y-900mm Z-1000mm W-560mm with 3-axis digital HEIDENHAIN Positip 855

Machine type milling machine - universal brand HURON type MU 5 year 1975 control type conventional storage France country of origin France delivery immediately cargo base camp, free truck Technical details x way 1300 mm y path 700 mm z-way 550 mm table size 1500 x 460 mm spindle speeds 15-2500 RPM spindle retainer for SK 40 feed range x - direction 1,6-820 mm / min feed Empire z-direction 1,6-820 mm / min rapid traverse X + Z - axes 2.8 m/min rapid traverse y - direction of 2.8 m / m in power - spindle motor 10 kW total power 14 kW machine weight approx. 4.6 t additional information good condition with 3 axis of DIGITAL HEIDENHAIN SK 40 BUILT IN 1975

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 3000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: CE back guard. Optional: DRO Fagor or Heidenhain.

No. 2630: 1 gebr. CNC vertical milling machines and drill / jig boring machine Fabr. BURKHARDT & WEBER Type 120 NCW HYOP Retrofit / overhauled in 2000 with HEIDENHAIN TNC 426 PB ARB.-ber.: 1250 x 630 x 560 mm Power: 44 kW Accessories: fixed table / table 1200 x 710, additional table top height 200 mm,. 36-Fach tool changer magazine, coolant system / coolant. HEIDENHAIN - probe / probe TS 630 -the pictured magnetic clamping table is not included! -Miscellaneous: spindle ISO 50, revs / speed range 30-3000 min-1 (with optional high-speed spindle) Max torque / torque 522 NM Rapid / rapid feed 10 m / min maximum distance spindle nose - table surface 725 mm Projection spindle Center - stands 800 mm. Space requirements / measurements approx. 5 x 5 m, weight / weight approx. 12 to The engine was overhauled in 2000 General / retrofitted and modernized with digital drive ...

Rebuilt lathe. Swing over bed: 725mm. Swing over carriage: 400mm. Distance between centers: 4000mm. Spindle nose: 81mm. Motor power: 25-20cv. Equipped with universal chuck of 315 and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

: 4100 No.1 gebr. Rods - machining center 5 - axes Fabr. LID MAHO, DMC type 60 S Bu. 2002 with Sinumerik 840 D - Powerline Shopmill ARB.-ber.: 760 x 460 x 560 mm Power: 19/28 kW Accessories: NC Swivel Head (B-axis) 120 / + 30 ° 60-Fach tool magazine with taper cleaning NC rotary axis (A-axis) with collet Chuck clamping top 65 Tailstock, hydraulically tweeter NC bar loader 1100 mm Workpiece pick-up facility with discharge conveyor Production package with -Coolant tank 600 l, INTERLIT SKA 200-760 - IKZ 40 bar through the Centre of the spindle -Conveyors -Rotating viewing window Tool measurement Fabr. BLUM Oil mist extraction Mode 4 Other: HSK-A 63 spindle speed range up to 18,000 min-1 Feeds up to 50 m / min Rapid traverse 50 m / min Space requirement approx. 5 x 4 x 2.8 m (see floor plan) Weight approx. 13 to Shipping dimensions approx. 12 lane meters in maxi ...

Lid FP 2 NC Used machine (good condition) Control type NC Built in 1987 Operating hours n/a Price 9,900 € net plus VAT Dimensions 1325 x 1315x 1845 Weight 1450 kg Location 35708 Haiger The machine was part of a training workshop, it is made of 1st hand and has few hours of operation. Travel routes; x = 300, Y = 300, Z = 400 mm Speed range: 31.5 - 3150 rpm DESCRIPTION CNC milling machine lid FP 2 NC year: 1987 Control: 3-D web control dialog 4 Can also be operated manually via handwheels Travel paths; x = 300, Y = 300, Z = 400 mm Voltage: 380 volts Speed range: 31.5 - 3150 rpm power, 1.6/ 2.0 kW WZ recording, SK 40 Hydraulic Tool Clamping Rigid Angular Table Table Size: 620 x 390 mm Electronic handwheel Coolant device Machine light Spray protection cabin Accessories: operating and programing instructions, electrical circuit diagrams, WZ-holders Weight: 1450 kg Dimensions: L  ...