heidelberg stahl ti used for sale

Timken, FAG - Batch bearings 294KG

equipped with ground clamp, welding torch, pressure gauge and power cable

TImken - Batch of bearings 182KG

Microprocessor controlled MIG/MAG/MMA/TIG Lift inverter multi-process welding machine. Input voltage - 3PH 400V Mains frequency - 50/60 Hz Current range - 20-300A Maximum current - 300A @60% DC current - 205A Maximum no-load voltage - 63V Maximum current drawn - 15A Absorbed current at 60% - 10A Maximum power consumption - 9 kW Power consumption at 60% - 6.5 kW Power factor - 0.9

Voltage: 380 - 400 V Phase: 3 Hertz: 50 Hz Output current: 40 - 350 A Duty cycle: 80% Welding wire: 0.80 - 1.2 mm Weld plate thickness: 0.5 - 12 mm Accessories: Gas-protected welding gun (5 mm) European plug (50 mm²) Earth terminal (2 m) 36 V gas control Features: IGBT MAG / MIG, MMA & Lift TIG Dual pulse function VRD 2T/4T function 4-drive feeder 5-language support 18 sets Packed in 2 boxes: 730x420x900 and 550x330x400

Batch of electronics modules and cards Condition: unused

Microprocessor controlled MIG/MAG/MMA/TIG Lift inverter multi-process welding machine. Input voltage - 3PH 400V Mains frequency - 50/60 Hz Current range - 20-300A Maximum current - 300A @60% DC current - 205A Maximum no-load voltage - 63V Maximum current drawn - 15A Absorbed current at 60% - 10A Maximum power consumption - 9 kW Power consumption at 60% - 6.5 kW Power factor - 0.9

Lifting tipper suitable for Diosna boiler 240 Availability: immediately Shell size: Diosna 240 Instruction manual: available Test book: available

Equipped with Current voltage 220V: Single phase; Frequency (HZ): 50/60; Rated voltage (V): 21-30; Output current (A): 20-270; Input capacity: 4.5; Service Cycle (%): 60; Wire feed speed: 0-10; Efficiency (%): 85; Power factor: 0.93; Degree of insulation: F; Enclosure rating/degree of protection: IP21; G.W/N.W (KG): 11/8.07; Dimensions (MM): 515x245x350; Unused in box

We sell from stock 2000 Gates timing belts per piece 34,50 € on request also plastic/stainless steel conveyor rollers EL 415mm Diameter 50 mm

-Stage for lifting tipper -the platform is suitable for boilers from the Kemper Kronos 240A spiral mixer

Offer 25396 Technical data: - Load capacity 250 kg - Face plate diameter 600 mm - Table height in horizontal position 910 mm - Face plate can be infinitely swivelled by hand crank - Face plate speed electr. infinitely variable 0.2 - 2 rpm - Welding current transmission 300 A - Drive 220 V - Right + Left - Run - E. footswitch - Space requirement approx. W 800 x H 910 x D 1200 mm - Weight approx. 150 kg

- Lifting tipper for Diosna boiler - Manufacturer: Emil Kemper GmbH - Type: HK150 - suitable for spiral mixer boilers from Diosna SP 240 AD boilers

-Lifting tipper for Diosna spiral mixer boiler - Manufacturer: Diosna Dierks & Söhne GmbH - Type: HK170 - Lifting tipper is mobile on castors - for spiral mixer boilers from Diosna SPV160A and SP 160A

The hydraulic automatic tilting kettle with a capacity of 600 liters is designed for professional use in the food processing industry. The hydraulic tilting system ensures easy and safe emptying of the contents. The double jacket with thermal oil provides even heat distribution and precise temperature control, making it suitable for cooking, mixing, and thermal processing of soups, sauces, jams, creams, and ready meals. Manufactured from high-quality stainless steel, it ensures durability, hygiene, and long service life. Technical specifications: Hydraulic automatic tilting kettle Manufacturer: Sind With cover Double jacket- thermal oil Volume: 600 liters Power: 30.7kW Made out of stainless steel Machine dimensions in cm: Length: 205 Width: 158 Height: 123

Offer 26070 Technical data: - Max. load capacity in horizontal position 7500 kg - Face plate dimensions 1500 x 1500 mm - Face plate motorized swivel 0 - 120 ° - Rotary movement electr. infinitely variable 0.0028 - 1.04 rpm - Right + Counterclockwise - Welding current transmission approx. 500 A - Drive 400 V x 25 kW - Table height in horizontal position approx. 1600 mm - Handheld remote control - Space requirement approx. W 2000 x H 1600 x D 2450 mm - Weight approx. 5500 kg

Table dimensions: 1000,400 mm pneumatic clamping: 4 St. moveable: ja For fast compression of Minizinken- or Softline compounds especially for larger cross-sections - Independent of the angle - Especially suitable for arched manufacturing - Table size 1000 x 400 mm - Pneumatic connection 10 bar - Air consumption 1 cdm / stroke - 4 clamping cylinders for workpiece clamping - Pairs switchable - Right half of the table supported on hardened shafts through ball linear bearings - 2 pressure cylinder for linear table displacement, separately switchable - Weight: 200 kg - CE - execution (Technical details according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tilting device for concrete switching tables Manufacturer: FIBO Built in 1995 Drive: Electro-hydraulic Optional: Sliding device And switching tables.

9x PCS Intus 5600 Time Attendance Terminal RFID. Due to a change of provider, we have 9 PCS time and attendance terminals for sale. These were operated by us via RFID Myfare access chips. Very robust and intuitive devices.Further information can be obtained on the homepage of PCS. New price was 2200€ net / piece. The price refers to 1 terminal. If several devices are purchased, a package price can of course be negotiated. Very good condition, fully functional. Insured shipping possible. Net unit price. For traders, an invoice with VAT will be issued.

The Oxipack SLT is a state-of-the-art, non-destructive leak tester specifically designed for packaging inspection. It enables precise and fast leak detection without damaging the object being tested. This device is ideal for use in quality control and helps to ensure the integrity of packaging. With its user-friendly interface, the SLT offers straightforward handling and reliable results. The modern technology ensures high sensitivity and repeatability in leak testing, allowing even the smallest leaks to be effectively detected., This used unit, serviced by Oxipack as recently as November 2025, meets all required standards and is both durable and low-maintenance, making it a cost-effective solution for companies that need to conduct regular testing. The SLT is an excellent choice for any industry where tightness is critical, including the food, pharmaceutical, and packaging sectors., pow ...

Boiler Lifter König HK 1100/2400SL for W&P UC80A Boiler - Boiler lifting tipper for Werner & Pfleiderer UC80 A boiler - Manufacturer: König Maschinen - Type: HK 1100 / 2400 SL - 400 volts - 4.5 kW - 50 Hz - Year of construction 2010

Lifting tipper Diosna HK 224 Stepless electrical adjustment Suitable for tank car Diosna SP 240 A Connection 400V, 16A-CEE plug Used machine from the bakery

Technical data: - Max. load capacity in horizontal position 15000 kg - Face plate diameter 1800 mm - Face plate motorized swivel 0 - 120 ° - Adjustable table height - Rotary movement electr. infinitely variable 0.04 - 0.80 rpm - Right + Counterclockwise - Welding current transmission approx. 500 A - Drive 400 V / 5.5 + 7.5 kW - min. table height in horizontal position approx. 1700 mm - medium table heights at horiz. Position approx. 1900 + 2100 mm - Max. table height in horizontal position approx. 2300 mm - Handheld remote control - Space requirement approx. W 2100 x H 1700 x D 2400 mm - Weight approx. 8500 kg

Professional rolling pin, rolling pin, dough roll 40cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against the loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 40 cm• Total length: 67 cmDetails see pictures

Professional rolling pin, rolling pin, dough roll 30cm NEWâ Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against loosening of the handles• wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 30 cm• Total length: 57 cmDetails see pictures

Professional rolling pin, rolling pin, dough roll 35cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against the loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 35 cm• Total length: 62 cmDetails see pictures

Professional rolling pin, rolling pin, dough roll 25cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 25 cm• Total length: 52 cmDetails see pictures

Fermentation belt carrier tilting planks with trolley32 pieces tipping planks with trolleyManufacturer: RingoplastType: Baked goods CombiDimensions: 580x390x48 mmInner dimensions: 567x377x45 mmMaterial: PolypropyleneWeight: 950 gWe have several in stockShipping costs please ask for details see picture

Palamatic M7 Palpharmamove drum lifter tipper Stainless, Manual drum lifter and tipper, mobile, 250Kg safe working load

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Ess, TIG and hand electrode welding machine, water-cooled -Type: THYROARC 3 AC/DC direct/alternating current -incl.: ground cable, gas fitting, hose package 7500 mm long -Welding power: max. 280 A, see nameplate -Dimension: 1300/570/H900 mm -Weight: 262kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 920 mm -Cross-section: 125 x 40 mm -Photography: see technical drawing in the photos -Dimensions: 1070/600/H125 mm -Weight: 136 kg

Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Body: made of stainless steel -Manufacturer BAADER Type 531 -Tilt height: 2500 mm (can be changed for an extra charge) -Max. tine width: 740 mm -Chain hoist: Demag, year of manufacture 2007 -Dimensions: 3800/890/H1060 mm -Weight: 326 kg -without documentation

TIG welding machine, welding machine, TIG welding machine -TIG welding machine: AC direct current -Hose package: 1 -with accessories: gas nozzles, needles, mixing nozzles, ceramic nozzle shells ... -Max. Welding power: 220 A. -Air cooled -Incl. Ground cable -Gas valve -Dimensions: 870/455/H665 mm -Weight: 112 kg

Forklift tipping containers, tipping containers, tipping skips, forklift skips, lift trucks -Tipping container: made of stainless steel -Manufacturer Bauer type: GU 300 9 -Content: approx. 0.3 m³ -with: holder for forklift tines -Max. Tine width: 205 x 70 mm -with: hydraulic tilting mechanism via the forklift battery 24 volts -Dimensions: 1880/680/H675 mm -Own weight: 208 kg

Pressure-tight clamping connection, formwork accessories, KRASO clamping connection -monolithic connection of the vulcanized KRASO locking disc -Easy installation -No assembly on site -simple closure of the clamping point -no complicated gluing of the sealing plugs -no labor-intensive rework -absolutely watertight clamping point -Tested to be watertight inside and out -from company liquidation -Total length: 300 mm -1 wire mesh box approx. 350 pieces -Weight: including box 142 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 600 x 320 mm -T groove width: 12mm -T grooves: 5 pieces -Equipment: rotatable, pivotable, tiltable -Foot mount: 325 x 190 mm -Number: 1x tables available -Price per piece -Dimensions: 800/300/H240 mm -Weight: 70kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, injection molding machine, injection molding machine -Replacement screw tips: for injection molding machine -Number: 5x tips available -Sketches with the pictures -different sizes -Price: complete -Admission thread: 27 x 3 mm -Weight: 16.3 kg

Drill bit, twist drill bit, drill bit, for drilling rig, drilling center -Quantity: 53x NC twist drills with tightening thread -Diameter: 8x Ø32mm 9x Ø34mm 8x Ø36mm 6x Ø38mm 1x Ø39mm 8x Ø40mm 7x Ø41mm 6x Ø42mm -Intake: MK4 -Type: HSS -according to pictures - Sale: only complete -Weight: 84kg

TIG welding rod, welding wire Stainless, IK-resistant (wet corrosion up to 350 °C). Corrosion-resistant like similar low-carbon and stabilized austenitic 18/8 CrNi (N) steels/cast steel grades. Cold toughness down to -196 °C. Connections and surfacing of similar stabilized and non-stabilized austenitic CrNi (N) and CrNiMo (N) steels/cast steel grades. Connections and surfacing on cold-tough matching/similar austenitic CrNi (N) steels/cast steel grades. -net weight: 5 kg -Number: 2x package available -Price: per package -Weight complete: 5.2 kg/package

Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Flat belt pulley, toothed pulley, multi-belt pulley, belt pulley, timing belt pulley -Manufacturer: Bush, Timing belt pulley type 1615 40-8M-30-T -Type: P60-5M -Taper clamping bushing: optibelt 1615-25 -Hole: Ø 25 mm -Quantity: 19x toothed discs available -Price: per piece -Dimensions: Ø 106 x 38 mm -Weight: 1.8 kg/pc.

fixed point, fixed center point, fixed Morse taper, fixed center point, center points -Manufacturer: WMW ABW, fixed centering tip with mounting bore -Recording: Morse cone MK5 -Bore: Ø 8 mm -Number: 2x centering tips available -Price: per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg/pc.