heidelberg stahl ti used for sale

Pullers with pullers for 160cm deep furnace NEWused pullers good condition stainless steel on rollers with 15 pieces  New ALU pullersTrolley Outer dimensions : W: 203cm D: 62cm H: 190cmPullers for 160cm deep ovenPuller dimensions : B: 194cm D: 58cm Height : 4cmthe price is for 15 pullers and trolleysWe have different large pullers in stockDetails see picture

Pullers for deck ovens 80cm deep NINEew pullers / pullers for deck ovensPullers made of ALUAspullers for 80cm deep ovenPuller dimensions : W: 115cm D: 58cmDeck shop oven, deck ovenfits for Miwe, Wachtel, Friedrich and Wiesheu Fastening hook belowideal for pizza, rolls, small bread, baquettes, croissant etc. do we have various large pullers in stockDetails see picture 

Pullers with puller carriage for 80cm deep furnace NEWThe puller trolley stainless steel with 10 ALU pullerson rollersTrolley profile 40x40mm screwedOuter dimensions: W: 126cm D: 64cm H: 184cmInternal dimensions: W: 118cm D: 64cm10 pieces Pullers made of ALUAducts for 80cm deep ovenPuller dimensions: W: 115cm T: 58cmWe have various large pullers in stockDetails see picture 

Pullers with puller carriage for 200cm deep furnace NEWThe puller trolley stainless steel with 10 ALU pullerson rollersTrolley profile 40x40mm screwedOuter dimensions: W: 251cm D: 64cm H: 184cmInternal dimensions: W: 243cm D: 64cm10 pieces Pullers made of ALUAductors for 200cm deep furnacePuller dimensions: B: 240cm T: 58cmSee pictureDo we have various large pullers in stockDetails see picture 

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermal expansion valve -Manufacturer: Alco, thermal expansion valve, unused in original packaging -Type: TIE-MW 55/PCN 802456 -Price per piece -Number: 2 piece -Dimension package: 105/80/H70 mm -Weight: 0.4 kg/piece

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motorized winch, tackle, pulling winch, block and tackle, cable winch -For passenger transport and loads: up to 500 kg -E-motor: Greifzug type C80/9-2FL 1.8 kW -Brake: Greifzug FDB 13 CHR 16 Nm -Rope speed: 18 m/min -Rope: Ø 8 mm -Rope length: 143 m -with: Rope length measuring device -Dimensions: 700/460/H600 mm -Weight: 78 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilt cylinders, lifting cylinders, Short-stroke heavy-duty cylinder -Manufacturer: Tirre, hydraulic cylinder double-acting stroke 25 mm -Type designation: 160.90.25.10541 -Piston rod: Ø 90 mm -Cylinder: outside Ø 185 mm -Dimensions: 300/225 / H225 mm -Weight: 50kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders, short-stroke heavy-duty cylinders -Manufacturer: Tirre, double-acting hydraulic cylinders -Stroke: 45 mm -Type designation: 160.90.45.10607 -Piston rod: Ø 90 mm -Cylinder: outer Ø 185 mm -Dimensions: 340/225/H225 mm -Weight: 51 kg

Pipe saw, pipe jigsaw, support jigsaw, reciprocating saw, handsaw Ideal for sawing work even in wet, damp rooms and shafts, wherever electric reciprocating saws are not permitted. -Output power: 1000 W -Steel pipes: up to max. Ø 160 mm -in the suitcase -Number: 4 saws available -Price: per piece -Dimensions: 690/200/H120 mm -Weight: 8 kg

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Pressure switch: Herion 0 880 100 -Valves: IWN RMD-53/44 / BVB-F 25/40-1 / PMV-DR 20/40-P -Individual components: see photos -Total dimensions: 450/250/H330 mm -Weight: 13.5 kg

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Valves: airtec MS 01 / airtec MO 04 310-HN -Valves: IWN PMV-D 40/40-BL / PMV-D 25/32-BL / BVB-S 25/40-1 -Individual components: see photos -Total dimensions: 500/420/H185 mm -Weight: 18,7 kg

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Pressure switch: Herion 0 880 100 -Valves: PMV-D 25/32 BL / PMV-D 40/40 BL -Individual components: see photos -Total dimensions: 440/380/H230 mm -Weight: 11.3kg

4/3 directional valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Krämer Grebe Control block from Tiromat 3000/430 vacuum packaging system -Valves: PMV-D 40/40 BL / PMV-D 25/32-BL / BVB-S 25/40 -Individual components: see photos -Overall dimensions: 500/460/H190 mm -Weight: 19 kg

Strapping machine, packaging machine, strapping machine, skin pack machine, pallet wrapper, geared motor with reel -Manufacturer: Nord, gear motor with reel from packaging machine Tiromat Compact M420 -Transmission: Nord 1 S32F F i= 5.40 -Motor: Nord SK1S32F 0-750 rpm / 0-139 rpm -Number: 2x reel unit available / 1x left 1x right -price: per piece -Total dimensions: 520/460/H360 mm each -Weight: 19 kg/pc.

Pallet rack, heavy-duty rack, high-bay rack, boltless rack, storage rack uprights, single supports, stiffening profile, shelf plates, shelves, shelf board -Storage rack: steel shelf stands and wooden shelves in various sizes -Shelf stands: Dimensions 1990 x 500 mm (10 Euro net) 27 pcs. / 2992 x 500 mm 5 pcs. (12 Euro net) -Shelves: 1000 x 500 mm 339 pcs. (5 Euro net) / 1000 x 600 mm 218 pcs. (6 Euro net) -Weight: Stands 5.4 to 8.4 kg/piece / Shelves 5.6/6.3 kg/piece

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer -Manufacturer: Timmer, Bourdon tube manometer -Type: M-SH-40-0/10-1/8-KU-bar/psi -Item No.: 18245004 -Screw connection: see photos -Number: 20x pressure gauges available Price: per piece / from 2 pieces €7,-/piece -Cardboard dimensions: 45/45/H45 mm -Weight: 0.1 kg/piece

Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power: 53.5/64.9 kW -Fan: Ziehl-Abegg -Operating pressure: max 16 bar Quantity: 1 piece available -Dimensions: 800/390/H880 mm -Weight: 49 kg

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power: 11.4/14.7 kW -Fan: Ziehl-Abegg -Operating pressure: max 10 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 800/710/H730 mm -Weight: 49 kg/piece

Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Handover: in its current condition as inspected -Fan motor: missing -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 -Power: kW -Fan: missing -Operating pressure: max 10 bar -Dimensions: 800/710/H740 mm -Weight: 27 kg

Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Pallet racking: boltless racking, heavy-duty racking / 34 uprights and 104 crossbeams -Stand depth: 1100 mm -Stand height 4100 mm: 2 pieces -Stand height 3500 mm: 13 pieces -Stand height 2000 mm: 19 pieces -Crossbeams, length 2760 mm: 93 pieces -Crossbeams, length 1890 mm: 11 pieces -Dimensions/Quantity: see photo parts list -Submission/Price: complete -Transport dimensions: 6950/2250/H1460 mm Total weight: 4380 kg

Pad printing machine, screen printing machine, rotary printing machine, pad printer -Manufacturer: Eickmeyer, screen printing machine, pad printing machine -Type: TIC 121 SC -Voltage: 230 V -Table size: 180 x 100 mm -Protrusion: 165 mm -Operation: with foot pedal -Number: 2x pad printing machines available -Price: per piece -Transport dimensions: 670/400/H530 mm -Weight: 50 kg/piece

Winding roller, winding shaft, tensioning shaft, pneumatic expansion shaft, reel, reel rod, trapezoidal thread spindle, spindle, unwinding reel, unwinding reel, sheet metal unwinder -Manufacturer: Tidland, winding shaft -Type: G890E -Drive shaft: Ø 40 x 80 mm -Mounting: Bolt circle Ø 220 x 11 mm -Number: 8x winding shaft available -Price: per piece -Dimensions: Ø 250 x 855 mm -Weight: 53 kg/unit

BREADING MACHINE, TITAN INTERNATIONAL, TYPE: TPM 630 Technical description: Serial number: 871038 Material: Stainless steel Mesh widht: 630 mm Hopper load capacity: 208 Lt Power supply: 380-440 V / 50-60 Hz Dimensions: 1850 x 1000 x 2000 mm

Titan T250 Specifications Condition New / Never Used Status Disconnected. Preservation inspection was done in the Fall of 2020 and another inspection in 2022. Manufactured Solar Turbines 2017 Driver Solar Turbines Titan 250 Natural Gas Turbine / Version 30002S CS/MD Max HP 30,000 HP Rated RPM 10,500 RPM Control Panel Solar Turbotronic CTLM02

For Sale: Boss Titan F-1000 Automatic Vacuum Packaging Machine, High-quality Boss Titan F-1000 Automatic vacuum packaging machine available for sale. This industrial-grade machine is designed for high-capacity and reliable packaging operations., Configuration:, - Automatic lid system, - Integrated discharge conveyor belt, - Equipped with the largest 300 m³/h Busch vacuum pump, Technical Specifications:, - Chamber size: approx. 1015 x 675 x 210 mm, - Seal length: up to 980 mm, - Vacuum pump capacity: up to 300 m³/h, - Power supply: 3-phase, 230/400 V, 50 Hz, - Advanced sensor control system with programmable settings, - Double seam sealing system for secure packaging, - Stainless steel construction for durability and hygiene, Features:, - Fully automatic operation for efficient production, - High-performance Busch pump ensures fast and deep vacuum levels (down to approx. 0.1 mbar), - Co ...

Table with treadmill Pretzel table Rheon -Table with treadmill on castors -side wood can be folded down (a wooden plate is 30cm deep) -unfolded it is 123cm -Band width: 52cm -Strap length approx., 250cm

A Timesavers (Grindingmaster) wide belt grinding machine with two upper wide belt grinding units and one brushing unit is available. Contact roller diameter: 180mm/280mm, grinding belt accuracy: 0.01mm, brushing unit outer diameter: 300mm, brush oscillation: 150strokes/min, brush motor speed range: 8m-22m/s, table height adjustment: 1mm-100mm, grinding belt dimensions X/Y: 1630mm/2620mm. Machine dimensions X/Y/Z: approx. 4300mm/2650mm/2650mm, weight: approx. 5500kg, control: Siemens PLC. Including one IEP nanofilter cartridge extraction system. Documentation vorhanden. An on-site inspection is possible.

Adjustable traverse, crane traverse, overhead crane, crane hook traverse, load traverse, heavy load traverse, compensating traverse -Manufacturer: LHS load handling equipment, compensating spreader beam for transporting different loads -Type: TIV 10-6 -Loading capacity: 10 t -Transport dimensions: 6030/410/H930 mm -Empty weight: 720 kg

This 3-axis TIGER TFA6 Bed Type Milling Machine was manufactured in 1998. It features a longitudinal travel of 2000 mm, transversal travel of 1000 mm, and vertical travel of 1000 mm. The machine is equipped with a Heidenhain TNC 426 CNC, a manual bi-rotary head, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the TIGER TFA6 machine we have for sale. Contact us for further details.

planing width: 30-260 mm planing height: 10-200 mm number of spindles: 6 Weight: 6650 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels., Additional title: Keg spraying and keg brushing, Max. capacity: 300 Kegs/h, Capacity keg filling plant: 110 Kegs/h, Voltage: 220/380 V, Frequency: 50 Hz, Length: ca. 2200 mm, Width: ca. 1500 mm, Formats: 30-litre and 50-litre kegs, EU format, with PU jacket, Features: Spray jets, high-pressure pump, brush station, label discharge

Semi-automatic rotary system with four fill/cleaning heads. Suitable for: - processing of 15, 20, 25, 30 and 50 l kegs as well as 20 l containers - beer - lemonades (without fruit pulp) - Coca-Cola drinks - premix and postmix - water - wine, Additional title: Rotokeg, Capacity up to: 50 KEG/h at 50 l KEGs and 25 hl/h beer, Length: 1495 mm, Width: 1495 mm, Height: 2400 mm, Formats: keg types: volume: 15-50 l; diameter: 230-405 mm; height: 320-620 mm, Operation / Control: Siemens Simatic S5

3 vertical stainless steel tanks, each capable of being heated with hot water. Previously used as CIP tanks (2 x alkali tanks and 1 x acid tank), Additional title: heatable, vertical stainless steel vessel, Volume appr.: 1000 l, Width: 1 m, Height: 2 m, Weight: 250 kg, Material: Stainless steel, Position: free standing, Base construction: Cylindrical tank with square tubular feet on spherical caps, Features: Top lid, temperature measurement, equipment for heating with hot water

General SKU201T015 LocationBarneveld Main Features MaterialStainless steel Motor0.25 KW Length300 mm Specified Features - Stirrer Stirrercheck Dissolver stirrercheck Shaft length300 mm Sizes stirring headØ125x13 mm Number of stirrers on shaft1 Motor0.25 kW 230/400 Volt (Ex) With variable speed drivecheck Speed mixing shaft0-600 rpm Mounted on supportcheck Adjustable heightcheck MaterialStainless steel Information MakeUnnown, manufacturer plate is missing Floorspace0,7x0,5 m Total height1,1 m Weight80 Kg ATEX compatiblecheckStirrers-Mixers > StirrersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU201T013 MakeUnknown, anufacturer plate is missing LocationBarneveld TypeUnknown Main Features MaterialStainless steel Motor0.25 KW Length300 mm Specified Features - Stirrer Stirrercheck Dissolver stirrercheck Shaft length300 mm Sizes stirring headØ120x10 mm Number of stirrers on shaft1 Motor0.25 kW 230/400 Volt (Ex) With variable speed driveSANTORAC 50 0,25D4 (Ex) Speed mixing shaft0-600 rpm Mounted on supportcheck Adjustable heightcheck MaterialStainless steel Information No.194 Year of constructionUnknown Mounted on framecheck Floorspace0,5x0,8 m Total height1 m Weight80 kg ATEX compatiblecheckStirrers-Mixers > StirrersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Neth ...

General SKU201T016 LocationBarneveld Main Features MaterialStainless steel Motor0.18 KW Length300 mm Specified Features - Stirrer Stirrercheck Dissolver stirrercheck Shaft length300 mm Sizes stirring headØ90x10 mm Number of stirrers on shaft1 Motor0.18 kW 220/380 (Ex) With variable speed driveNeuweg Variducer Speed mixing shaft0-10 rpm Mounted on supportcheck Adjustable heightcheck Information MakeUnknown, manufacturer plate is missing Floorspace0,7x0,5 m9 Total height1,1 m Weight80 Kg ATEX compatiblecheckStirrers-Mixers > StirrersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

faceplate diameter:4000 mm swing diameter:4300 mm turning height:330 mm faceplate turning speed range:1 - 92 U/min workpiece weight:18 t feeds:1 - 4000 mm/min main drive motor:55 kW total power requirement:85 kVA weight of the machine ca.:64 t dimensions of the machine ca.:90, x 7,2 x 5,5 m with CNC SIEMENS 840 D for 4 axis 2 Vertical Supports tool Basic holder chip conveyor

spindle diameter:200 mm x-travel:10000 mm y-travel:4000 mm z-axis:1500 mm W-axis (spindle longitudinal):1000 mm bore spindle turning speed range:1 - 2000 U/min dimension of the ram:600 x 530 mm high speed spindle taper ISO:60/50 rapid motion - x-axis:8000 mm/min rapid motion - y-axis:8000 mm/min rapid traverse Z-axis:5 m/min total power requirement:120 kW weight of the machine ca.:135 t dimensions of the machine ca.:16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm chip conveyor and coolant attachment

General SKU268U459 MakeBunting Titanium No.F7827 Year of construction1990 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialTitanium Volume1200 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity±1300 Ltr. Vessel sizesDia: 1150x1800mm Conical bottomcheck Dished top sidecheck Manholecheck Top connectionsDia: 47mm(4x), 70mm (3x), 100mm OutletcheckDia: 70mm With jacketcheck With propellor stirrercheck double Motor0,55kW, 230/400 Volt, 675 rpm Stainless Steel Reactors MaterialYttrium, Titanium Beta C, Stainless steel 1.4306 (304L), Titanium Information LocationBarneveld Floorspace1,5x1,5m Total height3m Weight1300kgStainless Steel ReactorsBunting TitaniumReactors > Stainless Steel ReactorsBrand > Bunting Titanium What you ca ...

General SKU349U858 MakeServolift LocationBarneveld CEcheck TypeHF 250 Main Features MaterialStainless steel/Aluminium Motor1.5 KW Height2950 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting machinecheck Lifting + tilting machinecheck Max. weight250 kg Lifting heightmin. 400 mm: max. 2950 mm Tilting heightmax. 2950 mm Hydraulic drivecheck With hydraulic unitcheck (Merk: LOTZ, type: MC4-V1B-PM-MN-T07-F5) Motor1,5 kW, 400 volt, 1400 rpm Suitable for product sizesDia. 570mm Information No.10815 Year of construction2003 With switchcheck Floorspace0,65x0,67 m Total height4 m Weight650 kgRubberBiotechnologyAgrochemicalsPlastic & polymersLifting/tilting machinesCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalSugarLubricants & oleoDairyAnimal feedOther  ...

General SKU026F110 MakeFreude Titan GmbH & Co. KG Sinsheim No.18414 Year of construction2010 Mounted on legscheck Pressure Working pressure shell0.5 Bar Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Hastelloy Surface13 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 2.4602 (Hastelloy C-22) Heat exchangercheck Horizontalcheck Notified bodycheck Heating surface13 m2 Tube capacity2x 15,5 Ltr Number of tubes:106 Tube diameter10mm Tube length4000mm Wall thickness tubes1 mm Max. temperature-196/+100 Degr. C. Shell capacity51 Ltr Max. temperature-196 / +100°C Shell with expansion jointcheck Shell connections2x dia. 50mm Cover connections2x dia. 50mm + 2x dia. 25mm Information LocationBarneveld Floorspace4,5x0,4 M Total height0,9 M Weight200 KG CEcheckRubber ...

Bridge crane for Ausseneinsatz Fabrikat steel - built 2007 Traglast 60 t - 16 m track width - height 8 m with enhances crane runway - completely screwed approx. 66 m long

Falzmaschine - Folding Machine Stahl T 36/6-6-KB Baujahr / Year 1997 Flachstapelanleger / Flat Pile Feeder Falztyp: 6 Taschen - 6 Taschen - Schwert Folding Type: 6 buckles - 6 buckles - 1 knife Format / Size: min. 80 x 100mm - max. 360 x 650mm Papiergrammatur / Paper weight: 40 – 250g/m² Stapelhöhe / Pile height max. 580mm Geschwindigkeit / Speed min. 10 m/min. - max. 160m/min. Durchmesser Falzwalzen / Diameter of folding rollers 32mm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Offer 24518 Specifications: - Load capacity 150 kg - Pick-up crosses + mounting bolts - Height of mounting bolt in horizontal position 1350 mm - Diameter of mounting bolt 55 mm - Rotary movement infinitely variable - Right.- Counterclockwise rotation - Drive 400 V / 3.0 kW - Height of mounting bolt in horizontal position 1350 mm - Space requirement approx. W 600 x D 1200 x H 1350 mm - Weight approx. 150 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 150 mm -Type: unknown -Mounting: Ø 55 mm -35 teeth: belt width 25 mm -Division: see photos -Quantity: 1x timing belt pulley available -Dimensions: Ø 150 x 45 mm -Weight: 3.4 kg

fixed point, fixed center point, fixed Morse taper, fixed center point -Toe: shaft-mounted -Photo: see pictures -Weight: 1 kg

Forklift tipping container, tipping container, tipping trough, forklift tipping, waste tipping container, scrap tipping container -Condition: New -with steel lid: made of galvanized sheet -Content: 0.8 m³ -Intake: for forklift tines -Max. Tine width: 150 mm -with tilt mechanism -Storage: stackable -Corrosion protection: powder coated -Dimensions: L /W/H 1750/750/870 mm -Number: several available -Price: per pieces -Own weight: 200 kg

Forklift tipping container, tipping container, tipping skip, forklift skip, waste tipping container, scrap tipping container -Condition: NEW -Contents: 0.8 m³ -Steel sheet: 3 mm -Mounting: for forklift tines -Max. tine width: 150 mm -with tilting mechanism -Storage: stackable -Corrosion protection: Powder-coated -Dimensions: 1750/750/H870 mm -Quantity: 6 pieces available -Price: per piece -Weight: 180 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 72-8M-20 -Material: Steel -Number of teeth: 90 teeth / Belt width: 20 mm -Mount: Optibelt 2012-30 taper clamping bushing Ø 30 x 32 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 192 x 32 mm -Weight: 4.1 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 64-8M-50 -Material: Steel -Number of teeth: 64 teeth / Belt width: 50 mm -Mount: Optibelt 2517-40 taper clamping bushing Ø 40 x 44.5 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 168 x 60 mm -Weight: 6.8 kg/pc.