138,027 used machines on RESALE, but how to find them? Machine Search
Auction-ID: A1-49964-48
used
Complete THIEME 3050 screen printing line with TESOMA hot air + UV drying tunnel and automatic stacker at the outlet. Large format industrial assembly to be overhauled. THIEME 3050 screen printing Maximum print size: 1,400 x 1,800 mm Maximum sheet size: 1,430 x 1,870 mm Maximum frame size: 1,900 x 2,200 mm Maximum media thickness: 50 mm Squeegee speed: 0.2 to 1.4 m/s Fine screen adjustment: +/- 5 mm Machine-only footprint: 3,975 x 2,832 mm (L x W) Machine weight alone: approx. 1,900 kg Power supply: 400 / 230 V - connection power 2.8 kW TESOMA drying tunnel (2005) Hot air + UV drying Installed power: 60 kW - heating power: 43 kW Power supply: 400 V - 50 Hz - 134 A Recent UV lamp and conveyor belts New UV lamp sets included (in stock) Service meter read at 11,168 hours Additional equipment Automatic stacker at the end of the line Remova ...
Supply voltage: 230V, current consumption: 1A. Including two printing tables, one vacuum table and one table without vacuum. The machine was used only lightly for approx. two years and is fully functional. Documentation available. An on-site inspection is possible.
Bacher 2045 Registerpunching Rigister punching width: 425mm Max plate width: 800mm
ESC-HIGH PRESS PLUS E3 Model 0 max. print size: 510 x 720 mm max. sheet size: 520 x 720 mm min. sheet size: 270 x 350 mm gripper margin: 10 mm Additional equipment: - RKS squeegee system - Antistatic device with control unit AFC-2 and SCPB electrodes 530 with cable length 180 cm including connector HV-4 - integrated cleaning station system TEKNEK in the machine inlet - equipped with ESC leading edge feeder Find more here - .ucymachines/
Nilpeter FB 4200 S UV dryers (GEW) all stations Corona Treater 2 Die Stations Sheeting Station Roll Lift 1 Waste Rewind 1 Product Rewind with Roll lift Magnetic Dies
A 6-color Kammann screen printing machine is available. Disk diameter: 120mm, cycle time: 75 cycles/min, colors: 6, UV dryer: 4, number of spindles: 2x8. Documentation available. On-site inspection is possible.
2016 OCE Varioprint 6200 ( Speedupgrade ) is 6250 because its been upgraded. Very fast black and white digital printing machine Speed 200 A4 pages/minute 1 PaperInput module (4 compartments) 1 HighCapacityStacker BLM 200 Booklet Maker Trimmer BLT289, Squarefoldmodul SFM204 Top-Cover R-sided Docking DFD2 Interface PCL Streaming Year of construction 2016 Counter: 75.262.000 The machine is dismantled now Find more here - .ucymachines/ Contact us at - sales@ucymachines
Approximately 12 boxes consisting of A4 and A3 paper Auction-ID: A1-50252-253
Reference Num.: 4378 Brand: Ryobi Type: 3302 HA Construction year: 1999 Impressions: 40 mio Size: 340 x 450 mm Available: directly Status: Not in production Location: Deutschland Sheet size: max 340 x 450 mm Printing speed: max 10,000 sheets/hour Printing units: 2
EKRA Drucker X3 Automatic Screen & Stencil Printer is expected to be available at the end of 2024 This system is part of an entire assembly line that can be purchased in its entirety It has a modified hood so that large stencils can also be used. This is the retrofitted stencil cleaning system (stencil underside cleaning). Installed in the machine The X3 automatic screen and stencil printer is specially designed for the flexible production demands of today’s market. The X3 can be used for the application of solder paste and / or glue onto PCBs, ceramics or glass substrates up to a size of max. 460 x 460 mm (18 x 18 inches). The standard EKRA screen and stencil holder has a flexible design which allows it to be used with all common stencils / screens up to 740 mm (29 inches) without use of an additional adapter. Quick clamp adapter systems of various manufacturers can e ...
used
Reference Num.: 4424 Brand: Ryobi Type: 522HXX Construction year: 1999 Size: 520 x 375 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 100 x 150 mm, max 520 x 375 mm Printing speed: max 13,000 sheets/hour Printing units: 2 Paper thickness: 16.93 mm Machine size: Length: 2,700 mm, Width: 2,225 mm, Height: 1,705 mm Total weight: kg 3,400 / lbs 7,496 Power: KW 18 / hp 18
Gallus R200 (refurbished by Graficon in 2005) Label printing machine Machine definition 1 UV rotary screen + 7x UV letterpress + 1 UV flexo Rotary hot stamp unit (after 5th unit) Printing to glue / liner (2 units) 2x rotary die cutting unit Longitudial slitting Technical parameters: Max. width of material: 222 mm Max printing width: 205 mm Magnetic cylinders: 72, 78, 84, 90, 96, 132, 136 teeth Printing cylinders: 72, 78, 84, 90, 96, 103, 110, 117, 124, 132 teeth Collars for screen: 110, 117, 124, 132, 144, 156, 168 teeth Cores for hot stamp: 72, 78, 84, 96, 103, 110, 117, 124 teeth Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Pitney Bowes Model: DI 425 Condition: used Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: IVM Model: DTPlus-600-2-XL (2 x Epson i3200 Print Heads) Year of Manufacture: 2023 Type of Machine : Digital Transfer Printing Line - Printing Speed: - 4-PASS: 12 m²/hour - 6-PASS: 8 m²/hour - 12-PASS: 4 m²/hour - Maximum Print Width: 600 mm - Maximum Print Resolution: 1800 dpi - Print Thickness: Adjustable from 1.5 mm to 6 mm Technology and Features: - Printhead Technology: Epson i3200 - Number of Printheads: 2 - Printhead Spacing: 10 mm - Ink Colors: CMYK + White - White Ink Circulation: Automatic - Color Management System: Standard - Ink Type: Water-soluble pigment ink - Ink Supply System: CISS (Continuous Ink Supply System) - Printing Costs: 1 L white ink = 40 m Drying and Software: - Drying Method: Air Drying System - RIP Software: MainTop Power and System Requirements: - Power Supply: 220 V - Power Consumption: 1200 W - System Requirements: Windows 7 or W ...
Offset plate puncher Bacher 2000, 425 mm, please review perforation shape- U and U.
BEIL register systems 425 /printing plate die-cutter suitable for autoplate system Distance 425 mm Art.Nr. L974
The Xerox iGen 150 Press is a high-performance digital printing press designed for commercial and industrial printing environments. It is known for its productivity, versatility, and print quality, making it a popular choice for print service providers. Key Specifications: - Print Speed: 150 pages per minute (ppm) - Monthly Duty Cycle: Up to 4.8 million pages - Print Resolution: 2400 x 2400 dpi for sharp image quality - Paper Handling: - Max Sheet Size: 364 x 660 mm (14.33 x 26) - Stock Weights: 60 to 350 gsm - Supports coated and uncoated stocks, textured papers, and synthetic materials - Color Management: Integrated with Xerox Automated Color Quality Suite (ACQS) for consistent, accurate color reproduction - Variable Data Printing (VDP): Ideal for personalized marketing materials Features and Benefits: - Productivity: High-speed digital press suitable for large-volume printing with ...
(printing, laminating, punching) Equipment / Additional information: Car inspection stickers were last produced
Lastra SM 65 development machine Online Plate Developing Machine for Thermal Metal Plates 65 cm inlet width, incl. cooler cleaned & tested Year of construction 2002 Art.Nr. L986
Fuji FLHZ 85 CD Quartz 3 Plate Developing Machine; very good condition; cleaned and tested; Inlet width 850mm; Chiller. Plate processor Fuji FLHZ 85 CD Quartz 3; very good condition; cleaned and checked; working width 850mm; Chiller.
Completely overhauled ready for testing Machine Electronic device for sheet travel control Air conditioning for the electrical cabinet Gripper bars C.U.B.E. Bobst-electronic for managing the machine C.U.B.E. Bobst-electronic for managing the complementary equipment BM Main motor Feeder Pile-tray with handle allowing manual lateral correction of the pile during production SPECIAL SHEET BREAKER DEVICE. To push the sheets downwards, ensuring good stacking NON-STOP FEEDER MANUAL DEVICE Adjustable lateral blowers with Centerline references Suction unit with multiple adjusting Safety system for lowering the pile try KERSTEN ANTISTATIC DEVICE ON THE SHEET FEEDER FOR SHEET TRAVEL Introduction table Covered by antistatic steel stainless plate Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle 4 front lays, adjustable in p ...
A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 20 ...
A small screen printing machine and a spray booth for print pre-treatment are available. 1) Screen printing machine (orange machine). 2) Spray booth SER.TEC. s.r.l. Cabina S / Apply Eco, year of manufacture: 2014. The system was only used for test purposes, as a print changeover took place. Documentation available. On-site inspection is possible.
Pressure plate punch Beil 780/425-S-H-AP2; cleaned and tested; die-cut 780 and 425 mm autoplate; Investment Contact. Plate punch hatchet 780/425-S-H-AP2; cleaned and checked; punch size 780 and 425mm Autoplate; contact for plate.
Total actual Printing hours, only 26,000, Specifications:, Infeed Conveyor for feeding Vertical Lid Stacks, Robotic removal of Lids from stack to Print Unit Conveyor, Auto-Denester Unit, No Lid no Ink and No Lid no Print System, ARCOTEC CG20-2 Pretreatment station, Main 6-Color Print Unit, Speed Control for Ink Fountain Rollers, Printing Roller self-cleaning device, Max. speed 30,000 Lids/ hr (depending on Lid size & shape), Max. Lid dia. Ø 200 mm, Min. Lid dia. Ø 50 mm, Max. Lid Height 25 mm, Max. Rectangular Lid size: 200 x 200 mm, Max. Printing dimensions: 180 x 180 mm, No. of Printing Blankets 4, UV Tunnel TUV 0077-99, UV-Tunnel power rating : 8 kW, Main printer power rating: 20kW, Polytype Counter/ Stacker unit, delivers Counted Vertical Stacks., 400 V 3phase, 50 Hz,, Printing Plate Pre-registration Unit., Max Lid dia: Ø 200 mm, Min Lid dia: Ø 50 mm, Max Lid Height: 25 mm, Max R ...
Buser Rotary Printing Machine (Switzerland) Model: CH-3428 Type: R5B E 1850/24L Year: 1997 Printing: Blades Blanket newly installed Conveyor in Good condition Colours: 24 Open Bearing with Repeats: 640, 720, 820, 914, 1018 Repeat Gears: all Repeats 12 sets available Sequgee: Different Sizes (1 Lot) Entry with Dust Suction Slot High Efficiency 3 pass Two Dryer Chambers with Gas Heated Sequgee Washer 01 Set Screen Washer 01 Find more here - .ucymachines/ Contact us at - sales@ucymachines
A screen printing system including a feed table with XY adjustment is available. Printing area: 800mm/500mm, max. print object height: 160mm, max. frame dimensions X/Y/Z: 1290mm/760mm/40mm, max. printing speed: 500 prints/h, machine dimensions X/Y/Z: approx. 1700mm/1100mm/2000mm, weight: approx. 450kg. Documentation available. An on-site inspection is possible.
We are offering for sale a Perfecta cutting line, all components built in 2013, consisting of: 1.High-Performance High-Speed Cutter Perfecta 168 TS Cutting width: 1,680 mm, usable rear table length: 1,680 mm Working height: 165 mm, min. offcut strip: 26 mm Pressing force: 3.5-60 kN Material clamp + rotating saddle, 6 carbide knives, with 5 knife boxes Table height: 890 mm Side tables on the right: 1 x 1.5 m, left: 1 x 0.5 x 1.5 m + 0.5 x 1.25 m Net weight: 6,900 kg - Total: 6 knives, all in good condition, 2 of which are almost As good as new The unloader can also be rotated 90 degrees parallel to the paper discharge direction if required. 2.Perfecta ZTS 2750 Clamp Transport System For automatic feeding of the high-speed cutter via the rear table.The cutting line is in very good condition and still in production. Max. clamp travel: 2,750 mm Insertion height without adapter: ...
Brush kit and rollers Agfa Elantrix 95 SX; used. Brush Kit and rollers for Agfa Elantrix 95 SX; condition used.
Printing units outside/inside: 3/1, doctor blade units: available, envelope size range: booklet min./max.: 100mm/150mm–180mm/254mm, pocket min./max.: 89mm/120mm–187mm/305mm. Documentation available. An on-site inspection is possible.
Printing units outside/inside: 2/1, doctor blade units: 3, production capacity: 800 envelopes/min, window unit: Mini-Splice 356 CMG, roll/splicer: Winkler + Dünnebier 191, web guiding: BST EKR 1000, gumming: standard remoist (moisture-activated gumming for sealing flaps), ink pumps: 2, extraction: window punching waste. Documentation available. An on-site inspection is possible.
Width 35 cm Year of manufacture 1987 Thermal relief printing IR Dryer Mobile substructure Delivery date: short-term Price on request. We supply and install worldwide.
A Morlock single-color pad printing machine is available. Ink system: cup system, oval print image diameter range: 100mm-250mm, min. cliché print image dimensions X/Y: 100mm/210mm, max. cliché print image dimensions X/Y: 250mm/280mm, ink cup diameter: approx. 80mm, pressing force range: 1100N-1500N, max. cycle rate: 1400-1800 cycles/h, machine dimensions X/Y/Z: approx. 1050mm/500mm/650mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible.
A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible.
Reference Num.: 4242 Brand: Xerox Type: Nuvera 120 EA Impressions: 10 mio Available: directly Status: Not in production Location: Deutschland
Reference Num.: 4283 Brand: Ryobi Type: 525 GXP Construction year: 2008 Impressions: 64 mio Available: directly Status: In production Location: Deutschland Printing units: 5 Equipment: - Ryobi PCS-H - Wendung 2:3 / 5:0 - RYOBI halbautomatischer Plattenwechsler - IR Trockner - Puderapparat Grafix Digital 3000 - Elektronische Seitenmarkenkontrolle - elektronische Doppelbogenkontrolle - Ultraschall-Doppelbogenkontrolle - Hochstapel Ausleger - Schuppenanleger - automatische Gummituchwascheinrichtung
Printing inserts for Muller Martini Grapha 16". For more info please inquire.
Reference Num.: 4295 Brand: MAN Roland Type: RZF 0B Construction year: 1979 Impressions: 33 mio Size: 520 x 720 mm Available: directly Status: In production Location: Deutschland Sheet size: min 210 x 580 mm, max 520 x 720 mm Printing speed: max 10,000 sheets/hour Printing units: 2 Machine size: Length: 5,038 mm, Width: 2,520 mm, Height: 1,965 mm Total weight: kg 8,600 / lbs 18,960 Power: KW 15 / hp 15
Reference Num.: 4294 Brand: MAN Roland Type: RZF 0B Construction year: 1975 Size: 520 x 720 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 210 x 580 mm, max 520 x 720 mm Printing speed: max 10,000 sheets/hour Printing units: 2 Machine size: Length: 5,038 mm, Width: 2,520 mm, Height: 1,965 mm Total weight: kg 8,600 / lbs 18,960 Power: KW 15 / hp 15 Equipment: - Trockner
Number Of Colours: 7 // Rim Diameter (Max): 160 mm
maximum number of results exceeded
please refine your search
200 € 
